C'est démarré et voilà le résultat des lignes de commande:
jeanmarie@jeanmarie-MS-7596:~$ sudo apt-get install --no-install-recommends smartmontools
[sudo] Mot de passe de jeanmarie :
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
Le paquet suivant a été installé automatiquement et n'est plus nécessaire :
libllvm10
Veuillez utiliser « sudo apt autoremove » pour le supprimer.
Paquets suggérés :
gsmartcontrol smart-notifier
Les NOUVEAUX paquets suivants seront installés :
smartmontools
0 mis à jour, 1 nouvellement installés, 0 à enlever et 5 non mis à jour.
Il est nécessaire de prendre 525 ko dans les archives.
Après cette opération, 2087 ko d'espace disque supplémentaires seront utilisés.
Réception de :1 [url]http://fr.archive.ubuntu.com/ubuntu[/url] focal/main amd64 smartmontools amd64 7.1-1build1 [525 kB]
525 ko réceptionnés en 0s (2439 ko/s)
Sélection du paquet smartmontools précédemment désélectionné.
(Lecture de la base de données... 225088 fichiers et répertoires déjà installés.)
Préparation du dépaquetage de .../smartmontools_7.1-1build1_amd64.deb ...
Dépaquetage de smartmontools (7.1-1build1) ...
Paramétrage de smartmontools (7.1-1build1) ...
Created symlink /etc/systemd/system/smartd.service → /lib/systemd/system/smartmontools.service.
Created symlink /etc/systemd/system/multi-user.target.wants/smartmontools.service → /lib/systemd/system/smartmontools.service.
Traitement des actions différées (« triggers ») pour man-db (2.9.1-1) ...
Traitement des actions différées (« triggers ») pour systemd (245.4-4ubuntu3.4) ...
libdvd-pkg: Checking orig.tar integrity...
/usr/src/libdvd-pkg/libdvdcss_1.4.2.orig.tar.bz2: Réussi
libdvd-pkg: `apt-get check` failed, you may have broken packages. Aborting...
jeanmarie@jeanmarie-MS-7596:~$
sudo
et
jeanmarie@jeanmarie-MS-7596:~$ sudo smartctl -s on -a /dev/sda
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-65-generic] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar Green (AF)
Device Model: WDC WD10EARS-00MVWB0
Serial Number: WD-WCAZA2260820
LU WWN Device Id: 5 0014ee 25a8aa543
Firmware Version: 51.0AB51
User Capacity: 1000204886016 bytes [1,00 TB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Sat Feb 6 12:17:49 2021 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (24960) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 243) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x3035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 253 168 021 Pre-fail Always - 925
4 Start_Stop_Count 0x0032 091 091 000 Old_age Always - 9536
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
9 Power_On_Hours 0x0032 052 052 000 Old_age Always - 35418
10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 095 095 000 Old_age Always - 5351
192 Power-Off_Retract_Count 0x0032 199 199 000 Old_age Always - 887
193 Load_Cycle_Count 0x0032 001 001 000 Old_age Always - 1620343
194 Temperature_Celsius 0x0022 117 108 000 Old_age Always - 33
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 1
198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 1
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 1
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
jeanmarie@jeanmarie-MS-7596:~$
