Bonjour,
en fait, j'ai de nouveau un problème aujourd'hui. Le premier fichier s'est imprimé, mais pas le deuxième. Grrrr...
Après avoir mis Loglevel à debug, j'ai ça :
E [12/Feb/2021:13:33:52 +0100] [Job 50] Job stopped due to filter errors; please consult the /var/log/cups/error_log file for details.
D [12/Feb/2021:13:33:52 +0100] [Job 50] The following messages were recorded from 13:33:49 to 13:33:52
D [12/Feb/2021:13:33:52 +0100] [Job 50] Applying default options...
D [12/Feb/2021:13:33:52 +0100] [Job 50] Adding start banner page "none".
D [12/Feb/2021:13:33:52 +0100] [Job 50] Adding end banner page "none".
D [12/Feb/2021:13:33:52 +0100] [Job 50] File of type application/pdf queued by "yvan".
D [12/Feb/2021:13:33:52 +0100] [Job 50] hold_until=0
D [12/Feb/2021:13:33:52 +0100] [Job 50] Queued on "FS-1041" by "yvan".
D [12/Feb/2021:13:33:52 +0100] [Job 50] time-at-processing=1613133229
D [12/Feb/2021:13:33:52 +0100] [Job 50] 3 filters for job:
D [12/Feb/2021:13:33:52 +0100] [Job 50] pdftopdf (application/pdf to application/vnd.cups-pdf, cost 66)
D [12/Feb/2021:13:33:52 +0100] [Job 50] gstoraster (application/vnd.cups-pdf to application/vnd.cups-raster, cost 99)
D [12/Feb/2021:13:33:52 +0100] [Job 50] /usr/lib/cups/filter/rastertokpsl (application/vnd.cups-raster to printer/FS-1041, cost 0)
D [12/Feb/2021:13:33:52 +0100] [Job 50] job-sheets=none,none
D [12/Feb/2021:13:33:52 +0100] [Job 50] argv[0]="FS-1041"
D [12/Feb/2021:13:33:52 +0100] [Job 50] argv[1]="50"
D [12/Feb/2021:13:33:52 +0100] [Job 50] argv[2]="yvan"
D [12/Feb/2021:13:33:52 +0100] [Job 50] argv[3]="Plan d\'action.pdf"
D [12/Feb/2021:13:33:52 +0100] [Job 50] argv[4]="1"
D [12/Feb/2021:13:33:52 +0100] [Job 50] argv[5]="CaBrightness=0 MediaType=PrnDef number-up=1 CaContrast=0 EngineSpeed=Off noCollate PageSize=A4 job-uuid=urn:uuid:7b606a98-1827-319c-5dab-cc9de19d121a job-originating-host-name=localhost date-time-at-creation= date-time-at-processing= time-at-creation=1613133229 time-at-processing=1613133229"
D [12/Feb/2021:13:33:52 +0100] [Job 50] argv[6]="/var/spool/cups/d00050-001"
D [12/Feb/2021:13:33:52 +0100] [Job 50] envp[0]="CUPS_CACHEDIR=/var/cache/cups"
D [12/Feb/2021:13:33:52 +0100] [Job 50] envp[1]="CUPS_DATADIR=/usr/share/cups"
D [12/Feb/2021:13:33:52 +0100] [Job 50] envp[2]="CUPS_DOCROOT=/usr/share/cups/doc-root"
D [12/Feb/2021:13:33:52 +0100] [Job 50] envp[3]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [12/Feb/2021:13:33:52 +0100] [Job 50] envp[4]="CUPS_REQUESTROOT=/var/spool/cups"
D [12/Feb/2021:13:33:52 +0100] [Job 50] envp[5]="CUPS_SERVERBIN=/usr/lib/cups"
D [12/Feb/2021:13:33:52 +0100] [Job 50] envp[6]="CUPS_SERVERROOT=/etc/cups"
D [12/Feb/2021:13:33:52 +0100] [Job 50] envp[7]="CUPS_STATEDIR=/run/cups"
D [12/Feb/2021:13:33:52 +0100] [Job 50] envp[8]="HOME=/var/spool/cups/tmp"
D [12/Feb/2021:13:33:52 +0100] [Job 50] envp[9]="PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [12/Feb/2021:13:33:52 +0100] [Job 50] envp[10]="SERVER_ADMIN=root@yvan-GA-78LMT-USB3-R2"
D [12/Feb/2021:13:33:52 +0100] [Job 50] envp[11]="SOFTWARE=CUPS/2.3.1"
D [12/Feb/2021:13:33:52 +0100] [Job 50] envp[12]="TMPDIR=/var/spool/cups/tmp"
D [12/Feb/2021:13:33:52 +0100] [Job 50] envp[13]="USER=root"
D [12/Feb/2021:13:33:52 +0100] [Job 50] envp[14]="CUPS_MAX_MESSAGE=2047"
D [12/Feb/2021:13:33:52 +0100] [Job 50] envp[15]="CUPS_SERVER=/run/cups/cups.sock"
D [12/Feb/2021:13:33:52 +0100] [Job 50] envp[16]="CUPS_ENCRYPTION=IfRequested"
D [12/Feb/2021:13:33:52 +0100] [Job 50] envp[17]="IPP_PORT=631"
D [12/Feb/2021:13:33:52 +0100] [Job 50] envp[18]="CHARSET=utf-8"
D [12/Feb/2021:13:33:52 +0100] [Job 50] envp[19]="LANG=fr_FR.UTF-8"
D [12/Feb/2021:13:33:52 +0100] [Job 50] envp[20]="PPD=/etc/cups/ppd/FS-1041.ppd"
D [12/Feb/2021:13:33:52 +0100] [Job 50] envp[21]="RIP_MAX_CACHE=128m"
D [12/Feb/2021:13:33:52 +0100] [Job 50] envp[22]="CONTENT_TYPE=application/pdf"
D [12/Feb/2021:13:33:52 +0100] [Job 50] envp[23]="DEVICE_URI=usb://Kyocera/FS-1041?serial=V217X15805"
D [12/Feb/2021:13:33:52 +0100] [Job 50] envp[24]="PRINTER_INFO=Kyocera FS-1041"
D [12/Feb/2021:13:33:52 +0100] [Job 50] envp[25]="PRINTER_LOCATION="
D [12/Feb/2021:13:33:52 +0100] [Job 50] envp[26]="PRINTER=FS-1041"
D [12/Feb/2021:13:33:52 +0100] [Job 50] envp[27]="PRINTER_STATE_REASONS=none"
D [12/Feb/2021:13:33:52 +0100] [Job 50] envp[28]="CUPS_FILETYPE=document"
D [12/Feb/2021:13:33:52 +0100] [Job 50] envp[29]="FINAL_CONTENT_TYPE=application/vnd.cups-raster"
D [12/Feb/2021:13:33:52 +0100] [Job 50] envp[30]="AUTH_I****"
D [12/Feb/2021:13:33:52 +0100] [Job 50] Started filter /usr/lib/cups/filter/pdftopdf (PID 5795)
D [12/Feb/2021:13:33:52 +0100] [Job 50] Started filter /usr/lib/cups/filter/gstoraster (PID 5796)
D [12/Feb/2021:13:33:52 +0100] [Job 50] Started filter /usr/lib/cups/filter/rastertokpsl (PID 5797)
D [12/Feb/2021:13:33:52 +0100] [Job 50] Started backend /usr/lib/cups/backend/usb (PID 5798)
D [12/Feb/2021:13:33:52 +0100] [Job 50] Loading USB quirks from \"/usr/share/cups/usb\".
D [12/Feb/2021:13:33:52 +0100] [Job 50] Loaded 95 quirks.
D [12/Feb/2021:13:33:52 +0100] [Job 50] Printing on printer with URI: usb://Kyocera/FS-1041?serial=V217X15805
D [12/Feb/2021:13:33:52 +0100] [Job 50] OUTFORMAT=\"(null)\", so output format will be CUPS/PWG Raster
D [12/Feb/2021:13:33:52 +0100] [Job 50] pdftopdf: Last filter determined by the PPD: rastertokpsl; FINAL_CONTENT_TYPE: application/vnd.cups-raster => pdftopdf will not log pages in page_log.
D [12/Feb/2021:13:33:52 +0100] [Job 50] PDF interactive form and annotation flattening done via QPDF
D [12/Feb/2021:13:33:52 +0100] [Job 50] libusb_get_device_list=13
D [12/Feb/2021:13:33:52 +0100] [Job 50] STATE: +connecting-to-device
D [12/Feb/2021:13:33:52 +0100] [Job 50] PID 5795 (/usr/lib/cups/filter/pdftopdf) exited with no errors.
D [12/Feb/2021:13:33:52 +0100] [Job 50] Color Manager: Calibration Mode/Off
D [12/Feb/2021:13:33:52 +0100] [Job 50] STATE: -connecting-to-device
D [12/Feb/2021:13:33:52 +0100] [Job 50] Calling FindDeviceById(cups-FS-1041)
D [12/Feb/2021:13:33:52 +0100] [Job 50] Printer found with device ID: MFG:Kyocera;MDL:FS-1041;CLS:PRINTER;SN:V217X15805;CID:KY_KPSL_MonoPersonal; Device URI: usb://Kyocera/FS-1041?serial=V217X15805
D [12/Feb/2021:13:33:52 +0100] [Job 50] Device protocol: 2
D [12/Feb/2021:13:33:52 +0100] [Job 50] Found device /org/freedesktop/ColorManager/devices/cups_FS_1041
D [12/Feb/2021:13:33:52 +0100] [Job 50] Calling org.freedesktop.ColorManager.Device.Get(ProfilingInhibitors)
D [12/Feb/2021:13:33:52 +0100] [Job 50] Calling FindDeviceById(cups-FS-1041)
D [12/Feb/2021:13:33:52 +0100] [Job 50] Found device /org/freedesktop/ColorManager/devices/cups_FS_1041
D [12/Feb/2021:13:33:52 +0100] [Job 50] Calling GetProfileForQualifiers(Gray.PrnDef.600dpi...)
D [12/Feb/2021:13:33:52 +0100] [Job 50] Found profile /org/freedesktop/ColorManager/profiles/FS_1041_Gray__
D [12/Feb/2021:13:33:52 +0100] [Job 50] Calling org.freedesktop.ColorManager.Profile.Get(Filename)
D [12/Feb/2021:13:33:52 +0100] [Job 50] Use profile filename: \'\'
D [12/Feb/2021:13:33:52 +0100] [Job 50] Color Manager: ICC Profile:
D [12/Feb/2021:13:33:52 +0100] [Job 50] Ghostscript using Any-Part-of-Pixel method to fill paths.
D [12/Feb/2021:13:33:52 +0100] [Job 50] Ghostscript command line: gs -dQUIET -dSAFER -dNOPAUSE -dBATCH -dNOINTERPOLATE -dNOMEDIAATTRS -dShowAcroForm -sstdout=%stderr -sOutputFile=%stdout -sDEVICE=cups -r600x600 -dDEVICEWIDTHPOINTS=595 -dDEVICEHEIGHTPOINTS=842 -dcupsBitsPerColor=8 -dcupsColorOrder=0 -dcupsColorSpace=3 -dcupsCompression=1 -scupsPageSizeName=A4 -I/usr/share/cups/fonts -c \'<</.HWMargins[12.000000 10.000000 12.000000 10.000000] /Margins[0 0]>>setpagedevice\' -f -_
D [12/Feb/2021:13:33:52 +0100] [Job 50] envp[0]=\"CUPS_CACHEDIR=/var/cache/cups\"
D [12/Feb/2021:13:33:52 +0100] [Job 50] envp[1]=\"CUPS_DATADIR=/usr/share/cups\"
D [12/Feb/2021:13:33:52 +0100] [Job 50] envp[2]=\"CUPS_DOCROOT=/usr/share/cups/doc-root\"
D [12/Feb/2021:13:33:52 +0100] [Job 50] envp[3]=\"CUPS_FONTPATH=/usr/share/cups/fonts\"
D [12/Feb/2021:13:33:52 +0100] [Job 50] envp[4]=\"CUPS_REQUESTROOT=/var/spool/cups\"
D [12/Feb/2021:13:33:52 +0100] [Job 50] envp[5]=\"CUPS_SERVERBIN=/usr/lib/cups\"
D [12/Feb/2021:13:33:52 +0100] [Job 50] envp[6]=\"CUPS_SERVERROOT=/etc/cups\"
D [12/Feb/2021:13:33:52 +0100] [Job 50] envp[7]=\"CUPS_STATEDIR=/run/cups\"
D [12/Feb/2021:13:33:52 +0100] [Job 50] envp[8]=\"HOME=/var/spool/cups/tmp\"
D [12/Feb/2021:13:33:52 +0100] [Job 50] envp[9]=\"PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin\"
D [12/Feb/2021:13:33:52 +0100] [Job 50] envp[10]=\"SERVER_ADMIN=root@yvan-GA-78LMT-USB3-R2\"
D [12/Feb/2021:13:33:52 +0100] [Job 50] envp[11]=\"SOFTWARE=CUPS/2.3.1\"
D [12/Feb/2021:13:33:52 +0100] [Job 50] envp[12]=\"USER=root\"
D [12/Feb/2021:13:33:52 +0100] [Job 50] envp[13]=\"CUPS_MAX_MESSAGE=2047\"
D [12/Feb/2021:13:33:52 +0100] [Job 50] envp[14]=\"CUPS_SERVER=/run/cups/cups.sock\"
D [12/Feb/2021:13:33:52 +0100] [Job 50] envp[15]=\"CUPS_ENCRYPTION=IfRequested\"
D [12/Feb/2021:13:33:52 +0100] [Job 50] envp[16]=\"IPP_PORT=631\"
D [12/Feb/2021:13:33:52 +0100] [Job 50] envp[17]=\"CHARSET=utf-8\"
D [12/Feb/2021:13:33:52 +0100] [Job 50] envp[18]=\"LANG=fr_FR.UTF-8\"
D [12/Feb/2021:13:33:52 +0100] [Job 50] envp[19]=\"PPD=/etc/cups/ppd/FS-1041.ppd\"
D [12/Feb/2021:13:33:52 +0100] [Job 50] envp[20]=\"RIP_MAX_CACHE=128m\"
D [12/Feb/2021:13:33:52 +0100] [Job 50] envp[21]=\"CONTENT_TYPE=application/pdf\"
D [12/Feb/2021:13:33:52 +0100] [Job 50] envp[22]=\"DEVICE_URI=usb://Kyocera/FS-1041?serial=V217X15805\"
D [12/Feb/2021:13:33:52 +0100] [Job 50] envp[23]=\"PRINTER_INFO=Kyocera FS-1041\"
D [12/Feb/2021:13:33:52 +0100] [Job 50] envp[24]=\"PRINTER_LOCATION=\"
D [12/Feb/2021:13:33:52 +0100] [Job 50] envp[25]=\"PRINTER=FS-1041\"
D [12/Feb/2021:13:33:52 +0100] [Job 50] envp[26]=\"PRINTER_STATE_REASONS=none\"
D [12/Feb/2021:13:33:52 +0100] [Job 50] envp[27]=\"CUPS_FILETYPE=document\"
D [12/Feb/2021:13:33:52 +0100] [Job 50] envp[28]=\"FINAL_CONTENT_TYPE=application/vnd.cups-raster\"
D [12/Feb/2021:13:33:52 +0100] [Job 50] envp[29]=\"AUTH_INFO_REQUIRED=none\"
D [12/Feb/2021:13:33:52 +0100] [Job 50] Sending data to printer.
D [12/Feb/2021:13:33:52 +0100] [Job 50] Set job-printer-state-message to "Sending data to printer.", current level=INFO
D [12/Feb/2021:13:33:52 +0100] [Job 50] Start rendering...
D [12/Feb/2021:13:33:52 +0100] [Job 50] Set job-printer-state-message to "Start rendering...", current level=INFO
D [12/Feb/2021:13:33:52 +0100] [Job 50] Processing page 1...
D [12/Feb/2021:13:33:52 +0100] [Job 50] Set job-printer-state-message to "Processing page 1...", current level=INFO
D [12/Feb/2021:13:33:52 +0100] [Job 50] Sent 0 bytes...
D [12/Feb/2021:13:33:52 +0100] [Job 50] PID 5797 (/usr/lib/cups/filter/rastertokpsl) crashed on signal 7.
D [12/Feb/2021:13:33:52 +0100] [Job 50] Hint: Try setting the LogLevel to "debug" to find out more.
D [12/Feb/2021:13:33:52 +0100] [Job 50] Waiting for read thread to exit...
D [12/Feb/2021:13:33:52 +0100] [Job 50] PID 5798 (/usr/lib/cups/backend/usb) exited with no errors.
D [12/Feb/2021:13:33:52 +0100] [Job 50] Processing page 2...
D [12/Feb/2021:13:33:52 +0100] [Job 50] Rendering completed
D [12/Feb/2021:13:33:52 +0100] [Job 50] PID 5796 (/usr/lib/cups/filter/gstoraster) exited with no errors.
D [12/Feb/2021:13:33:52 +0100] [Job 50] End of messages
D [12/Feb/2021:13:33:52 +0100] [Job 50] printer-state=3(idle)
D [12/Feb/2021:13:33:52 +0100] [Job 50] printer-state-message="Rendering completed"
D [12/Feb/2021:13:33:52 +0100] [Job 50] printer-state-reasons=none
Effectivement, ça a l'air d'être rastertokpsl qui plante.