Et au final, un run donne :
$ sh hplip-3.20.11.run
Creating directory hplip-3.20.11
Verifying archive integrity... All good.
Uncompressing HPLIP 3.20.11 Self Extracting Archive...............................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
HP Linux Imaging and Printing System (ver. 3.20.11)
HPLIP Installer ver. 5.1
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Installer log saved in: hplip-install_Mon-15-Feb-2021_23:32:45.log
\
note: Defaults for each question are maked with a '*'. Press <enter> to accept the default.
INSTALLATION MODE
-----------------
Automatic mode will install the full HPLIP solution with the most common options.
Custom mode allows you to choose installation options to fit specific requirements.
Please choose the installation mode (a=automatic*, c=custom, q=quit) : c
INTRODUCTION
------------
This installer will install HPLIP version 3.20.11 on your computer.
Please close any running package management systems now (YaST, Adept, Synaptic, Up2date, etc).
DISTRO/OS CONFIRMATION
----------------------
Distro appears to be Ubuntu 20.04.
Is "Ubuntu 20.04" your correct distro/OS and version (y=yes*, n=no, q=quit) ? y
DRIVER OPTIONS
--------------
Would you like to install Custom Discrete Drivers or Class Drivers ( 'd'= Discrete Drivers*,'c'= Class Drivers,'q'= Quit)? : d
Initializing. Please wait...
SELECT HPLIP OPTIONS
--------------------
You can select which HPLIP options to enable. Some options require extra dependencies.
Do you wish to enable 'Network/JetDirect I/O' (y=yes*, n=no, q=quit) ? y
Do you wish to enable 'Graphical User Interfaces (Qt5)' (y=yes*, n=no, q=quit) ? n
Do you wish to enable 'PC Send Fax support' (y=yes*, n=no, q=quit) ? n
Do you wish to enable 'Scanning support' (y=yes*, n=no, q=quit) ? y
Do you wish to enable 'HPLIP documentation (HTML)' (y=yes*, n=no, q=quit) ? y
ENTER USER PASSWORD
-------------------
Please enter the sudoer (xianne)'s password:
INSTALLATION NOTES
------------------
Enable the universe/multiverse repositories. Also be sure you are using the Ubuntu "Main" Repositories. See: https://help.ubuntu.com/community/Repositories/Ubuntu for more information. Disable the CD-ROM/DVD source if you do not have the Ubuntu installation media inserted in the drive.
Please read the installation notes. Press <enter> to continue or 'q' to quit:
SECURITY PACKAGES
-----------------
AppArmor is installed.
AppArmor protects the application from external intrusion attempts making the application secure
Would you like to have this installer install the hplip specific policy/profile (y=yes*, n=no, q=quit) ? y
RUNNING PRE-INSTALL COMMANDS
----------------------------
OK
RUNNING HPLIP LIBS REMOVE COMMANDS
----------------------------------
sudo apt-get remove libhpmud0 libsane-hpaio
sudo apt-get remove libhpmud0 libsane-hpaio ( hp_libs_remove step 1)
OK
MISSING DEPENDENCIES
--------------------
Following dependencies are not installed. HPLIP will not work if all REQUIRED dependencies are not installed and some of the HPLIP features will not work if OPTIONAL dependencies are not installed.
Package-Name Component Required/Optional
Do you want to install these missing dependencies (y=yes*, n=no, q=quit) ?
INSTALL MISSING REQUIRED DEPENDENCIES
-------------------------------------
note: Installation of dependencies requires an active internet connection.
CHECKING FOR NETWORK CONNECTION
-------------------------------
Network connection present.
RUNNING PRE-PACKAGE COMMANDS
----------------------------
sudo dpkg --configure -a (Pre-depend step 1)
sudo apt-get install --yes --force-yes -f (Pre-depend step 2)
sudo apt-get update (Pre-depend step 3)
OK
DEPENDENCY AND CONFLICT RESOLUTION
----------------------------------
HPLIP-3.20.11 exists, this may conflict with the new one being installed.
Do you want to ('i'= Remove and Install*, 'q'= Quit)? :i
Starting uninstallation...
HPLIP uninstallation is completed
RUNNING POST-PACKAGE COMMANDS
-----------------------------
OK
RE-CHECKING DEPENDENCIES
------------------------
OK
RUNNING SCANJET DEPENDENCY COMMANDS
-----------------------------------
sudo apt-get install --assume-yes python-pip (Scanjet-depend step 1)
warning: Failed to install this Scanjet dependency package. Some Scanjet features will not work.
sudo pip2 install --upgrade pip (Scanjet-depend step 2)
sudo apt-get install --assume-yes libleptonica-dev (Scanjet-depend step 3)
sudo apt-get install --assume-yes tesseract-ocr (Scanjet-depend step 4)
sudo apt-get install --assume-yes libtesseract-dev (Scanjet-depend step 5)
sudo -H pip2 install tesserocr (Scanjet-depend step 6)
sudo apt-get install --assume-yes tesseract-ocr-all (Scanjet-depend step 7)
sudo apt-get install --assume-yes libzbar-dev (Scanjet-depend step 8)
sudo apt-get install --assume-yes python-zbar (Scanjet-depend step 9)
warning: Failed to install this Scanjet dependency package. Some Scanjet features will not work.
sudo -H pip2 install opencv-python (Scanjet-depend step 10)
warning: Failed to install this Scanjet dependency package. Some Scanjet features will not work.
sudo -H pip2 install PyPDF2 (Scanjet-depend step 11)
sudo -H pip2 install imutils (Scanjet-depend step 12)
sudo -H pip2 install pypdfocr (Scanjet-depend step 13)
warning: Failed to install this Scanjet dependency package. Some Scanjet features will not work.
sudo -H pip2 install scikit-image (Scanjet-depend step 14)
sudo -H pip2 install scipy (Scanjet-depend step 15)
OK
READY TO BUILD AND INSTALL
--------------------------
Ready to perform build and install. Press <enter> to continue or 'q' to quit:
PRE-BUILD COMMANDS
------------------
OK
BUILD AND INSTALL
-----------------
Running './configure --with-hpppddir=/usr/share/ppd/HP --libdir=/usr/lib --prefix=/usr --disable-qt4 --disable-qt5 --enable-doc-build --disable-cups-ppd-install --disable-foomatic-drv-install --disable-libusb01_build --disable-foomatic-ppd-install --disable-hpijs-install --disable-class-driver --disable-udev_sysfs_rules --disable-policykit --enable-cups-drv-install --enable-hpcups-install --enable-network-build --enable-dbus-build --enable-scan-build --disable-fax-build --enable-apparmor_build'
Please wait, this may take several minutes...
Command completed successfully.
Running 'make clean'
Please wait, this may take several minutes...
Command completed successfully.
Running 'make'
Please wait, this may take several minutes...
Command completed successfully.
Running 'sudo make install'
Please wait, this may take several minutes...
Command completed successfully.
Build complete.
POST-BUILD COMMANDS
-------------------
CLOSE HP_SYSTRAY
----------------
Sending close message to hp-systray (if it is currently running)...
OK
HPLIP UPDATE NOTIFICATION
-------------------------
Do you want to check for HPLIP updates?. (y=yes*, n=no) :
RESTART OR RE-PLUG IS REQUIRED
------------------------------
If you are installing a USB connected printer, and the printer was plugged in when you started this installer, you will need to either restart your
PC or unplug and re-plug in your printer (USB cable only). If you choose to restart, run this command after restarting: hp-setup (Note: If you are
using a parallel connection, you will have to restart your PC. If you are using network/wireless, you can ignore and continue).
Restart or re-plug in your printer (r=restart, p=re-plug in*, i=ignore/continue, q=quit) :
Please unplug and re-plugin your printer now. Press <enter> to continue or 'q' to quit:
PRINTER SETUP
-------------
Would you like to setup a printer now (y=yes*, n=no, q=quit) ?
Please make sure your printer is connected and powered on at this time.
Do you want to setup printer in GUI mode? (u=GUI mode*, i=Interactive mode) : i
Running 'hp-setup -i' command....
HP Linux Imaging and Printing System (ver. 3.20.11)
Printer/Fax Setup Utility ver. 9.0
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
(Note: Defaults for each question are maked with a '*'. Press <enter> to accept the default.)
--------------------------------
| SELECT CONNECTION (I/O) TYPE |
--------------------------------
Num Connection Description
Type
-------- ---------- ----------------------------------------------------------
0* usb Universal Serial Bus (USB)
1 net Network/Ethernet/Wireless (direct connection or JetDirect)
Enter number 0...1 for connection type (q=quit, enter=usb*) ? 0
Using connection type: usb
Setting up device: hp:/usb/DeskJet_2700_series?serial=CN0CR5W5FK
---------------------
| PRINT QUEUE SETUP |
---------------------
warning: One or more print queues already exist for this device: DeskJet_2700, DeskJet_2700_2.
Would you like to install another print queue for this device (y=yes, n=no*, q=quit) ? y
Please enter a name for this print queue (m=use model name:'DeskJet_2700_3'*, q=quit) ?
Using queue name: DeskJet_2700_3
Locating PPD file... Please wait.
Found PPD file: drv:///hp/hpcups.drv/hp-deskjet_2700_series.ppd
Description:
Note: The model number may vary slightly from the actual model number on the device.
Does this PPD file appear to be the correct one (y=yes*, n=no, q=quit) ?
Enter a location description for this printer (q=quit) ?Bureau
Enter additonal information or notes for this printer (q=quit) ?hplip-20.3.11
Adding print queue to CUPS:
Device URI: hp:/usb/DeskJet_2700_series?serial=CN0CR5W5FK
Queue name: DeskJet_2700_3
PPD file: drv:///hp/hpcups.drv/hp-deskjet_2700_series.ppd
Location: Bureau
Information: hplip-20.3.11
---------------------
| PRINTER TEST PAGE |
---------------------
Would you like to print a test page (y=yes*, n=no, q=quit) ?
HP Linux Imaging and Printing System (ver. 3.20.11)
Testpage Print Utility ver. 6.0
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
warning: Unable to connect to dbus. Is hp-systray running?
error: Unable to communicate with device (code=12): hp:/usb/DeskJet_2700_series?serial=CN0CR5W5FK
error: Unable to print to printer. Please check device and try again.
note: If an error occured, or the test page failed to print, refer to the HPLIP website
note: at: http://hplip.sourceforge.net for troubleshooting and support.
Done.
RE-STARTING HP_SYSTRAY
----------------------
HP Linux Imaging and Printing System (ver. 3.20.11)
System Tray Status Service ver. 2.0
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
warning: GUI Modules PyQt4 and PyQt5 are not installed
error: hp-systray requires Qt4 GUI and DBus support. Exiting.
Restent quelques warnings dans les ScanJet Dependency Commands et une erreur hp-systray
