Ce site est optimisé pour être consulté depuis un navigateur moderne dans lequel JavaScript est activé.

installer hp deskJet plus 4100

lecroq

Bonjour,
Je voudrais installer hp desjet plus 4100 sous wifi.

Merci.

anle

jpoc

faut essayer...
HPLIP

lecroq

Bonjour,

J'ai bien téléchargé hplip sur le site mais que faire après : copier dans le terminal le contenu?

xubu1957

Bonjour,

Tu as aussi notre Doc [doc]hplip[/doc]

lecroq

Bonjour,

J'ai fait

$ sh hplip-*.run 
sh: 0: Can't open hplip-*.run

lecroq

d/home/lecroq/Téléchargements/hplip
bash: cd/home/lecroq/Téléchargements/hplip: Aucun fichier ou dossier de ce type

lecroq

Bonjour,

J'ai installé l'imprimante qui fonctionne.
Mais le scan n'est pas reconnu.

lecroq@lecroq-K50ID:~/Téléchargements$ hp-scan

HP Linux Imaging and Printing System (ver. 3.20.11)
Scan Utility ver. 2.2

Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

error: No device selected/specified or that supports this functionality.
lecroq@lecroq-K50ID:~/Téléchargements$ sh hplip-3.20.2.run
sh: 0: Can't open hplip-3.20.2.run
lecroq@lecroq-K50ID:~/Téléchargements$ apt-cache policy hplip
hplip:
  Installé : 3.20.3+dfsg0-2
  Candidat : 3.20.3+dfsg0-2
 Table de version :
 *** 3.20.3+dfsg0-2 500
        500 http://fr.archive.ubuntu.com/ubuntu focal/main amd64 Packages
        100 /var/lib/dpkg/status

xubu1957

Bonjour,

Tu as essayé avec [doc]xsane[/doc] ?

Détail pratique :

sylvain3800 a écritI ] Le Titre du message

Cela parait bête , mais si dans le titre la marque et le modèle de l'imprimante pouvait être écrit cela serait déjà super utile pour les aidants , qui peuvent déjà se faire une première idée des pilotes qu'il te faut et de la procédure qu'il te faudra suivre pour les installer au besoin .

dans > Tuto : les Informations utiles à donner lorsque j'ai un probleme.

Tawal

Hello,

lecroq a écritBonjour,

J'ai fait

$ sh hplip-*.run 
sh: 0: Can't open hplip-*.run

La bonne commande serait plutôt :

sh hplip-3.21.2.run

Il te faut mettre le nom exact du fichier. (les numéros peuvent changer selon la version)
Il te faut aussi être dans le répertoire contenant le fichier.

lecroq

Oui,

Xsane m'indique aucun périphérique disponible.

grigouille

hp-plugin -i

lecroq

j'ai fait mais pas de changement :

hp-plugin -i

HP Linux Imaging and Printing System (ver. 3.20.11)
Plugin Download and Install Utility ver. 2.1

Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.


HP Linux Imaging and Printing System (ver. 3.20.11)
Plugin Download and Install Utility ver. 2.1

Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

(Note: Defaults for each question are maked with a '*'. Press <enter> to accept the default.)


------------------------------------------
| PLUG-IN INSTALLATION FOR HPLIP 3.20.11 |
------------------------------------------

  Option      Description                                       
  ----------  --------------------------------------------------
  d           Download plug-in from HP (recommended)            
  p           Specify a path to the plug-in (advanced)          
  q           Quit hp-plugin (skip installation)                

Enter option (d=download*, p=specify path, q=quit) ? d

-------------------
| DOWNLOAD PLUGIN |
-------------------

Checking for network connection...
Downloading plug-in from: 
Downloading plug-in: [\                                   ] 0%     Traceback (most recent call last):
  File "/usr/bin/hp-plugin", line 363, in <module>
    status, plugin_path, error_str = pluginObj.download(plugin_path, plugin_download_callback)
  File "/usr/share/hplip/installer/pluginhandler.py", line 254, in download
    core = core_install.CoreInstall()
  File "/usr/share/hplip/installer/core_install.py", line 239, in __init__
    self.passwordObj = password.Password(ui_mode)
  File "/usr/share/hplip/base/password.py", line 88, in __init__
    self.__readAuthType()  # self.__authType
  File "/usr/share/hplip/base/password.py", line 110, in __readAuthType
    distro_name = get_distro_name().lower()
  File "/usr/share/hplip/base/password.py", line 78, in get_distro_name
    return distro.linux_distribution(full_distribution_name=False)[0]
  File "/usr/lib/python3/dist-packages/distro.py", line 122, in linux_distribution
    return _distro.linux_distribution(full_distribution_name)
  File "/usr/lib/python3/dist-packages/distro.py", line 677, in linux_distribution
    self.version(),
  File "/usr/lib/python3/dist-packages/distro.py", line 737, in version
    self.lsb_release_attr('release'),
  File "/usr/lib/python3/dist-packages/distro.py", line 899, in lsb_release_attr
    return self._lsb_release_info.get(attribute, '')
  File "/usr/lib/python3/dist-packages/distro.py", line 552, in __get__
    ret = obj.__dict__[self._fname] = self._f(obj)
  File "/usr/lib/python3/dist-packages/distro.py", line 1012, in _lsb_release_info
    stdout = subprocess.check_output(cmd, stderr=devnull)
  File "/usr/lib/python3.8/subprocess.py", line 411, in check_output
    return run(*popenargs, stdout=PIPE, timeout=timeout, check=True,
  File "/usr/lib/python3.8/subprocess.py", line 512, in run
    raise CalledProcessError(retcode, process.args,
subprocess.CalledProcessError: Command '('lsb_release', '-a')' returned non-zero exit status 1.
Error in sys.excepthook:
Traceback (most recent call last):
  File "/usr/lib/python3/dist-packages/apport_python_hook.py", line 153, in apport_excepthook
    with os.fdopen(os.open(pr_filename,
PermissionError: [Errno 13] Permission denied: '/var/crash/_usr_share_hplip_plugin.py.1000.crash'

Original exception was:
Traceback (most recent call last):
  File "/usr/bin/hp-plugin", line 363, in <module>
    status, plugin_path, error_str = pluginObj.download(plugin_path, plugin_download_callback)
  File "/usr/share/hplip/installer/pluginhandler.py", line 254, in download
    core = core_install.CoreInstall()
  File "/usr/share/hplip/installer/core_install.py", line 239, in __init__
    self.passwordObj = password.Password(ui_mode)
  File "/usr/share/hplip/base/password.py", line 88, in __init__
    self.__readAuthType()  # self.__authType
  File "/usr/share/hplip/base/password.py", line 110, in __readAuthType
    distro_name = get_distro_name().lower()
  File "/usr/share/hplip/base/password.py", line 78, in get_distro_name
    return distro.linux_distribution(full_distribution_name=False)[0]
  File "/usr/lib/python3/dist-packages/distro.py", line 122, in linux_distribution
    return _distro.linux_distribution(full_distribution_name)
  File "/usr/lib/python3/dist-packages/distro.py", line 677, in linux_distribution
    self.version(),
  File "/usr/lib/python3/dist-packages/distro.py", line 737, in version
    self.lsb_release_attr('release'),
  File "/usr/lib/python3/dist-packages/distro.py", line 899, in lsb_release_attr
    return self._lsb_release_info.get(attribute, '')
  File "/usr/lib/python3/dist-packages/distro.py", line 552, in __get__
    ret = obj.__dict__[self._fname] = self._f(obj)
  File "/usr/lib/python3/dist-packages/distro.py", line 1012, in _lsb_release_info
    stdout = subprocess.check_output(cmd, stderr=devnull)
  File "/usr/lib/python3.8/subprocess.py", line 411, in check_output
    return run(*popenargs, stdout=PIPE, timeout=timeout, check=True,
  File "/usr/lib/python3.8/subprocess.py", line 512, in run
    raise CalledProcessError(retcode, process.args,
subprocess.CalledProcessError: Command '('lsb_release', '-a')' returned non-zero exit status 1.
lecroq@lecroq-K50ID:~$

lecroq

historique :
j'ai voulu installer la dernière version hplip-3.21.2
mais ce n'est pas cette version qui a été finalement installée.
J'ai suivi pas à pas le manuel ubuntu jusque

RESTART OR RE-PLUG IS REQUIRED
------------------------------
If you are installing a USB connected printer, and the printer was plugged in
when you started this installer, you will need to either restart your PC or
unplug and re-plug in your printer (USB cable only). If you choose to restart,
run this command after restarting: hp-setup (Note: If you are using a parallel
connection, you will have to restart your PC. If you are using
network/wireless, you can ignore and continue).

Restart or re-plug in your printer (r=restart, p=re-plug in*, i=ignore/continue, q=quit) :
Please unplug and re-plugin your printer now. Press <enter> to continue or 'q' to

J'ai choisi " r"
Puis j'ai trouvé une vidéo expliquant comment préparer l'imprimante et mes suis aperçue que j'avais ratée des étapes:, une protection à enlever, les cartouches à installer...

je ne sais pas si c'est important.

grigouille

As-tu vu la quantité d'erreurs qui sont sortis ? Et tu t'étonnes que "ça ne marche pas" ?
Ton système doit être complètement bancal.

Fais donc une installation fraîche d'Ubuntu.

xubu1957

Bonjour,

Comme demandé dans le premier message du tutoriel Retour utilisable de commande

Pour ajouter toi-même les balises code à ton précédent message #13 :

Cliquer sur le lien « Modifier » en bas à droite du message
Sélectionner le texte
Cliquer sur le <> de l'éditeur de message

RESTART OR RE-PLUG IS REQUIRED
------------------------------
If you are installing a USB connected printer, and the printer was plugged in 
when you started this installer, you will need to either restart your PC or   
unplug and re-plug in your printer (USB cable only). If you choose to restart,
run this command after restarting: hp-setup (Note: If you are using a parallel
connection, you will have to restart your PC. If you are using                 
network/wireless, you can ignore and continue).                               

Restart or re-plug in your printer (r=restart, p=re-plug in*, i=ignore/continue, q=quit) :
Please unplug and re-plugin your printer now.  Press <enter> to continue or 'q' to

_ _ _

Montre d'éventuels paquets cassés :

dpkg -l | grep -v ^ii

lecroq

Bonjour,

tu me conseilles de refaire une installation d'ubuntu ou de faire le nettoyage ou des mises à jours ?

xubu1957

Pour les imprimantes HP, il vaut mieux suivre les conseils de grigouille.

lecroq

Bonjour,

J'ai fait une mise à jour et j'ai refait

hp-plugin -i

il m'a demandé de supprimer libllvm10 et un autre mais je suis pas sûre: hplip-3.31.2.run

lecroq@lecroq-K50ID:~$

hp-plugin -i

HP Linux Imaging and Printing System (ver. 3.20.11)
Plugin Download and Install Utility ver. 2.1

Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.


HP Linux Imaging and Printing System (ver. 3.20.11)
Plugin Download and Install Utility ver. 2.1

Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

(Note: Defaults for each question are maked with a '*'. Press <enter> to accept the default.)


------------------------------------------
| PLUG-IN INSTALLATION FOR HPLIP 3.20.11 |
------------------------------------------

  Option      Description                                       
  ----------  --------------------------------------------------
  d           Download plug-in from HP (recommended)            
  p           Specify a path to the plug-in (advanced)          
  q           Quit hp-plugin (skip installation)                

Enter option (d=download*, p=specify path, q=quit) ?

-------------------
| DOWNLOAD PLUGIN |
-------------------

Checking for network connection...
Downloading plug-in from: 
Downloading plug-in: [\                                   ] 0%     Traceback (most recent call last):
  File "/usr/bin/hp-plugin", line 363, in <module>
    status, plugin_path, error_str = pluginObj.download(plugin_path, plugin_download_callback)
  File "/usr/share/hplip/installer/pluginhandler.py", line 254, in download
    core = core_install.CoreInstall()
  File "/usr/share/hplip/installer/core_install.py", line 239, in __init__
    self.passwordObj = password.Password(ui_mode)
  File "/usr/share/hplip/base/password.py", line 88, in __init__
    self.__readAuthType()  # self.__authType
  File "/usr/share/hplip/base/password.py", line 110, in __readAuthType
    distro_name = get_distro_name().lower()
  File "/usr/share/hplip/base/password.py", line 78, in get_distro_name
    return distro.linux_distribution(full_distribution_name=False)[0]
  File "/usr/lib/python3/dist-packages/distro.py", line 122, in linux_distribution
    return _distro.linux_distribution(full_distribution_name)
  File "/usr/lib/python3/dist-packages/distro.py", line 677, in linux_distribution
    self.version(),
  File "/usr/lib/python3/dist-packages/distro.py", line 737, in version
    self.lsb_release_attr('release'),
  File "/usr/lib/python3/dist-packages/distro.py", line 899, in lsb_release_attr
    return self._lsb_release_info.get(attribute, '')
  File "/usr/lib/python3/dist-packages/distro.py", line 552, in __get__
    ret = obj.__dict__[self._fname] = self._f(obj)
  File "/usr/lib/python3/dist-packages/distro.py", line 1012, in _lsb_release_info
    stdout = subprocess.check_output(cmd, stderr=devnull)
  File "/usr/lib/python3.8/subprocess.py", line 411, in check_output
    return run(*popenargs, stdout=PIPE, timeout=timeout, check=True,
  File "/usr/lib/python3.8/subprocess.py", line 512, in run
    raise CalledProcessError(retcode, process.args,
subprocess.CalledProcessError: Command '('lsb_release', '-a')' returned non-zero exit status 1.
Error in sys.excepthook:
Traceback (most recent call last):
  File "/usr/lib/python3/dist-packages/apport_python_hook.py", line 153, in apport_excepthook
    with os.fdopen(os.open(pr_filename,
PermissionError: [Errno 13] Permission denied: '/var/crash/_usr_share_hplip_plugin.py.1000.crash'

Original exception was:
Traceback (most recent call last):
  File "/usr/bin/hp-plugin", line 363, in <module>
    status, plugin_path, error_str = pluginObj.download(plugin_path, plugin_download_callback)
  File "/usr/share/hplip/installer/pluginhandler.py", line 254, in download
    core = core_install.CoreInstall()
  File "/usr/share/hplip/installer/core_install.py", line 239, in __init__
    self.passwordObj = password.Password(ui_mode)
  File "/usr/share/hplip/base/password.py", line 88, in __init__
    self.__readAuthType()  # self.__authType
  File "/usr/share/hplip/base/password.py", line 110, in __readAuthType
    distro_name = get_distro_name().lower()
  File "/usr/share/hplip/base/password.py", line 78, in get_distro_name
    return distro.linux_distribution(full_distribution_name=False)[0]
  File "/usr/lib/python3/dist-packages/distro.py", line 122, in linux_distribution
    return _distro.linux_distribution(full_distribution_name)
  File "/usr/lib/python3/dist-packages/distro.py", line 677, in linux_distribution
    self.version(),
  File "/usr/lib/python3/dist-packages/distro.py", line 737, in version
    self.lsb_release_attr('release'),
  File "/usr/lib/python3/dist-packages/distro.py", line 899, in lsb_release_attr
    return self._lsb_release_info.get(attribute, '')
  File "/usr/lib/python3/dist-packages/distro.py", line 552, in __get__
    ret = obj.__dict__[self._fname] = self._f(obj)
  File "/usr/lib/python3/dist-packages/distro.py", line 1012, in _lsb_release_info
    stdout = subprocess.check_output(cmd, stderr=devnull)
  File "/usr/lib/python3.8/subprocess.py", line 411, in check_output
    return run(*popenargs, stdout=PIPE, timeout=timeout, check=True,
  File "/usr/lib/python3.8/subprocess.py", line 512, in run
    raise CalledProcessError(retcode, process.args,
subprocess.CalledProcessError: Command '('lsb_release', '-a')' returned non-zero exit status 1.

lecroq@lecroq-K50ID:~$

dpkg -l | grep -v ^ii

Souhait=inconnU/Installé/suppRimé/Purgé/H=à garder
| État=Non/Installé/fichier-Config/dépaqUeté/échec-conFig/H=semi-installé/W=attend-traitement-déclenchements
|/ Err?=(aucune)/besoin Réinstallation (État,Err: majuscule=mauvais)
||/ Nom                                           Version                             Architecture Description
+++-=============================================-===================================-============-======================================================================================================
rc  ippusbxd                                      1.34-2ubuntu1                       amd64        Daemon for IPP USB printer support
rc  linux-image-5.4.0-53-generic                  5.4.0-53.59                         amd64        Signed kernel image generic
rc  linux-image-5.4.0-54-generic                  5.4.0-54.60                         amd64        Signed kernel image generic
rc  linux-image-5.4.0-56-generic                  5.4.0-56.62                         amd64        Signed kernel image generic
rc  linux-image-5.4.0-58-generic                  5.4.0-58.64                         amd64        Signed kernel image generic
rc  linux-image-5.4.0-59-generic                  5.4.0-59.65                         amd64        Signed kernel image generic
rc  linux-image-5.4.0-60-generic                  5.4.0-60.67                         amd64        Signed kernel image generic
rc  linux-modules-5.4.0-53-generic                5.4.0-53.59                         amd64        Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc  linux-modules-5.4.0-54-generic                5.4.0-54.60                         amd64        Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc  linux-modules-5.4.0-56-generic                5.4.0-56.62                         amd64        Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc  linux-modules-5.4.0-58-generic                5.4.0-58.64                         amd64        Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc  linux-modules-5.4.0-59-generic                5.4.0-59.65                         amd64        Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc  linux-modules-5.4.0-60-generic                5.4.0-60.67                         amd64        Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc  linux-modules-extra-5.4.0-53-generic          5.4.0-53.59                         amd64        Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc  linux-modules-extra-5.4.0-54-generic          5.4.0-54.60                         amd64        Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc  linux-modules-extra-5.4.0-56-generic          5.4.0-56.62                         amd64        Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc  linux-modules-extra-5.4.0-58-generic          5.4.0-58.64                         amd64        Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc  linux-modules-extra-5.4.0-59-generic          5.4.0-59.65                         amd64        Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP
rc  linux-modules-extra-5.4.0-60-generic          5.4.0-60.67                         amd64        Linux kernel extra modules for version 5.4.0 on 64 bit x86 SMP

lecroq@lecroq-K50ID:~$