Acer Extensa 2508 - Ordinateur et souris gelés à l'ouverture

Bonjour Malbo,

Oui, certainement pour le Boot-info. STP dis-moi quoi/comment faire because je suis very débutante. Merci.

Mommy.

Voici le rapport :

boot-info-4ppa125 [20210223_1648]

============================== Boot Info Summary ===============================

=> Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos1)/boot/grub. It also embeds following components:

modules
---------------------------------------------------------------------------
fshelp ext2 part_msdos biosdisk
---------------------------------------------------------------------------
=> FreeDOS (eXtended FDisk) is installed in the MBR of /dev/sdb.

sda1: __________________________________________________________________________

File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 20.04.2 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab /etc/default/grub
/boot/grub/i386-pc/core.img

sda2: __________________________________________________________________________

File system: Extended Partition
Boot sector type: Unknown
Boot sector info:

sda5: __________________________________________________________________________

File system: swap
Boot sector type: -
Boot sector info:

sdb1: __________________________________________________________________________

File system: vfat
Boot sector type: Windows XP: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:


================================ 1 OS detected =================================

OS#1: L'OS actuellement utilisé - Ubuntu 20.04.2 LTS CurrentSession on sda1

============================ Architecture/Host Info ============================

CPU architecture: 64-bit
BOOT_IMAGE of the installed session in use:
/boot/vmlinuz-5.4.0-65-generic root=UUID=5994cf52-7694-4227-8202-092c4394ba65 ro quiet splash vt.handoff=7


===================================== UEFI =====================================

This installed-session is not in EFI-mode.
EFI in dmesg.
[ 0.011299] ACPI: UEFI 0x00000000787B8000 000236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.011360] ACPI: UEFI 0x00000000787A5000 000042 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
[ 3.247272] fb0: EFI VGA frame buffer device
[ 27.615636] fb0: switching to inteldrmfb from EFI VGA



============================= Drive/Partition Info =============================

Disks info: ____________________________________________________________________

sda : notGPT, no-BIOSboot, has-noESP, not-usb, not-mmc, has-os, 2048 sectors * 512 bytes
sdb : notGPT, no-BIOSboot, has---ESP, usb-disk, not-mmc, no-os, 63 sectors * 512 bytes

Partitions info (1/3): _________________________________________________________

sda1 : is-os, 64, apt-get, grub-pc , grub2, grub-install, grubenv-ok, update-grub, farbios
sdb1 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, not-far

Partitions info (2/3): _________________________________________________________

sda1 : isnotESP, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sdb1 : is---ESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot

Partitions info (3/3): _________________________________________________________

sda1 : not-sepboot, with-boot, fstab-without-boot, not-sep-usr, with--usr, fstab-without-usr, std-grub.d, sda
sdb1 : not-sepboot, no-boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, std-grub.d, sdb

fdisk -l (filtered): ___________________________________________________________

Disk sda: 465.78 GiB, 500107862016 bytes, 976773168 sectors
Disk identifier: 0x000da04f
Boot Start End Sectors Size Id Type
sda1 * 2048 968620031 968617984 461.9G 83 Linux
sda2 968622078 976771071 8148994 3.9G 5 Extended
sda5 968622080 976771071 8148992 3.9G 82 Linux swap / Solaris
Disk sdb: 7.21 GiB, 7736072192 bytes, 15109516 sectors
Disk identifier: 0x74330904
Boot Start End Sectors Size Id Type
sdb1 * 63 15107903 15107841 7.2G b W95 FAT32

parted -lm (filtered): _________________________________________________________

sda:500GB:scsi:512:4096:msdos:ATA WDC WD5000LPVX-2:;
1:1049kB:496GB:496GB:ext4::boot;
2:496GB:500GB:4172MB:::;
5:496GB:500GB:4172MB:linux-swap(v1)::;
sdb:7736MB:scsi:512:512:msdos:Kingston DataTraveler 3.0:;
1:32.3kB:7735MB:7735MB:fat32::boot;

blkid (filtered): ______________________________________________________________

NAME FSTYPE UUID PARTUUID LABEL PARTLABEL
sda
├─sda1 ext4 5994cf52-7694-4227-8202-092c4394ba65 000da04f-01
├─sda2 000da04f-02
└─sda5 swap 2ffdc31f-68b4-4fab-9d9d-abb59357400b 000da04f-05
sdb
└─sdb1 vfat 13C8-7F88 74330904-01 KINGSTON

df (filtered): _________________________________________________________________

Avail Use% Mounted on
sda1 409.6G 5% /
sdb1 876M 88% /media/mariel/KINGSTON

Mount options: __________________________________________________________________

sda1 rw,relatime,errors=remount-ro
sdb1 ro,nosuid,nodev,relatime,uid=1000,gid=1000,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,showexec,utf8,flush,errors=remount-ro

====================== sda1/boot/grub/grub.cfg (filtered) ======================

Ubuntu 5994cf52-7694-4227-8202-092c4394ba65
Ubuntu, avec Linux 5.4.0-65-generic 5994cf52-7694-4227-8202-092c4394ba65
Ubuntu, avec Linux 5.4.0-64-generic 5994cf52-7694-4227-8202-092c4394ba65
Ubuntu, avec Linux 3.19.0-65-generic 5994cf52-7694-4227-8202-092c4394ba65
### END /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_uefi-firmware ###

========================== sda1/etc/fstab (filtered) ===========================

# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda1 during installation
UUID=5994cf52-7694-4227-8202-092c4394ba65 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=2ffdc31f-68b4-4fab-9d9d-abb59357400b none swap sw 0 0

======================= sda1/etc/default/grub (filtered) =======================

GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

==================== sda1: Location of files loaded by Grub ====================

GiB - GB File Fragment(s)
280,142898560 = 300,801146880 boot/grub/grub.cfg 1
372,158569336 = 399,602221056 boot/grub/i386-pc/core.img 1
258,707172394 = 277,784711168 boot/vmlinuz 1
266,956333160 = 286,642180096 boot/vmlinuz-3.19.0-65-generic 1
257,402484894 = 276,383813632 boot/vmlinuz-5.4.0-64-generic 1
258,707172394 = 277,784711168 boot/vmlinuz-5.4.0-65-generic 1
257,402484894 = 276,383813632 boot/vmlinuz.old 1
255,571025848 = 274,417299456 boot/initrd.img 5
46,407222748 = 49,829376000 boot/initrd.img-3.19.0-65-generic 3
46,383518219 = 49,803923456 boot/initrd.img-5.4.0-64-generic 2
255,571025848 = 274,417299456 boot/initrd.img-5.4.0-65-generic 5
46,383518219 = 49,803923456 boot/initrd.img.old 2

===================== sda1: ls -l /etc/grub.d/ (filtered) ======================

-rwxr-xr-x 1 root root 17622 sept. 8 12:24 10_linux
-rwxr-xr-x 1 root root 42359 sept. 8 12:24 10_linux_zfs
-rwxr-xr-x 1 root root 12894 sept. 8 12:24 20_linux_xen
-rwxr-xr-x 1 root root 12059 juil. 17 2018 30_os-prober
-rwxr-xr-x 1 root root 1424 sept. 8 12:24 30_uefi-firmware
-rwxr-xr-x 1 root root 214 juin 26 2015 40_custom
-rwxr-xr-x 1 root root 216 juin 26 2015 41_custom


======================== Unknown MBRs/Boot Sectors/etc =========================

Unknown BootLoader on sda2

00000000 1e 00 28 ff 1e 00 28 ff 1e 00 28 ff 1e 00 28 ff |..(...(...(...(.|
*
000001b0 1e 00 28 ff 1e 00 28 ff 1e 00 28 ff 1e 00 00 fe |..(...(...(.....|
000001c0 ff ff 82 fe ff ff 02 00 00 00 00 58 7c 00 00 00 |...........X|...|
000001d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200


Suggested repair: ______________________________________________________________

The default repair of the Boot-Repair utility would purge (in order to fix packages) and reinstall the grub-efi-amd64-signed of
sda1,
using the following options: sdb1/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s use-standard-efi-file

Blockers in case of suggested repair: __________________________________________

The current session is in BIOS-compatibility mode. Please disable BIOS-compatibility/CSM/Legacy mode in your UEFI firmware, and use this software from a live-CD (or live-USB) that is compatible with UEFI booting mode. For example, use a live-USB of Boot-Repair-Disk-64bit (www.sourceforge.net/p/boot-repair-cd), after making sure your BIOS is set up to boot USB in EFI mode. This will enable this feature.

Confirmation request before suggested repair: __________________________________

The boot of your PC is in BIOS-compatibility/CSM/Legacy mode. You may want to retry after changing it to EFI mode.
Alternatively, you may want to retry after deactivating the [Separate /usr partition:] option.
Are you sure you want to continue anyway?

Final advice in case of suggested repair: ______________________________________


Please do not forget to make your UEFI firmware boot on the L'OS actuellement utilisé - Ubuntu 20.04.2 LTS CurrentSession entry (sdb1/efi/****/shim****.efi (**** will be updated in the final message) file) !
The boot of your PC is in BIOS-compatibility/CSM/Legacy mode. You may want to retry after changing it to UEFI mode.

Et le rapport :

https://paste.ubuntu.com/p/72nDr8nyvz/

Donc qu'est-ce que je dois faire maintenant ?

Étape3
mariel@mariel-Extensa-2508:~$ sudo smartctl -a /dev/sda
[sudo] Mot de passe de mariel :
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-65-generic] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family: Western Digital Blue
Device Model: WDC WD5000LPVX-22V0TT0
Serial Number: WD-WX31A84J6NHL
LU WWN Device Id: 5 0014ee 6afa54921
Firmware Version: 01.01A01
User Capacity: 500107862016 bytes [500 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Tue Feb 23 20:13:40 2021 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 9480) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 108) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x7035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 151 140 021 Pre-fail Always - 1441
4 Start_Stop_Count 0x0032 096 096 000 Old_age Always - 4757
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
9 Power_On_Hours 0x0032 073 073 000 Old_age Always - 20419
10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 096 096 000 Old_age Always - 4484
191 G-Sense_Error_Rate 0x0032 001 001 000 Old_age Always - 454
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 252
193 Load_Cycle_Count 0x0032 001 001 000 Old_age Always - 1164293
194 Temperature_Celsius 0x0022 115 103 000 Old_age Always - 28
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 0 -
# 2 Short offline Completed without error 00% 0 -
# 3 Short offline Completed without error 00% 0 -

SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

mariel@mariel-Extensa-2508:~$

mariel@mariel-Extensa-2508:~$ sudo smartctl -a /dev/sda
[sudo] Mot de passe de mariel :
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-65-generic] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family: Western Digital Blue
Device Model: WDC WD5000LPVX-22V0TT0
Serial Number: WD-WX31A84J6NHL
LU WWN Device Id: 5 0014ee 6afa54921
Firmware Version: 01.01A01
User Capacity: 500107862016 bytes [500 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Tue Feb 23 20:13:40 2021 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

Est-ce que le problème est réglé ?

J'ai continué avec tes instructions et la fin du message de mon terminal est :

Traitement des actions différées (« triggers ») pour bamfdaemon (0.5.3+18.04.201
80207.2-0ubuntu2) ...
Rebuilding /usr/share/applications/bamf-2.index...
mariel@mariel-Extensa-2508:~$

Donc c'est réglé ?

Merci Malbo,
Pour l'instant, ça marche... depuis au moins 35 minutes sans coupure.
STP est-ce que c'est possible que j'abîme mon ordi quand je le ferme ?
Quand je fais "déconnexion", mon ordi affiche le logo Ubuntu et il ne se ferme que si je le ferme manuellement avec le bouton de mise hors tension ?

Donc je commence par quoi STP ?
Par ailleurs, j'ai chargé le DVD d'installation de Ubuntu 12.04. Mais je n'ai rien installé.
Je ne sais pas s'il y a un lien, mais mon ordi remarche.
Merci.