J'ai remarqué des anomalie en branchant un de mes Hdd. J'ai donc choisi de faire une vérification son état avec smartmontools. Ca a donné ça:
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-66-generic] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF READ SMART DATA SECTION ===
SMART Error Log Version: 1
ATA Error Count: 393 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 393 occurred at disk power-on lifetime: 272 hours (11 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 06 89 00 40 e8 Error: UNC 6 sectors at LBA = 0x08400089 = 138412169
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 06 89 00 40 e0 00 01:04:26.202 READ DMA EXT
ef 03 45 00 00 00 a0 00 01:04:26.201 SET FEATURES [Set transfer mode]
ff ff ff ff ff ff ff 0c 01:04:26.190 [VENDOR SPECIFIC]
25 00 02 87 00 40 e0 00 01:04:25.369 READ DMA EXT
ef 03 45 00 00 00 a0 00 01:04:25.368 SET FEATURES [Set transfer mode]
Error 392 occurred at disk power-on lifetime: 272 hours (11 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 01 88 00 40 e8 Error: UNC 1 sectors at LBA = 0x08400088 = 138412168
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 02 87 00 40 e0 00 01:04:25.369 READ DMA EXT
ef 03 45 00 00 00 a0 00 01:04:25.368 SET FEATURES [Set transfer mode]
ff ff ff ff ff ff ff 0c 01:04:25.357 [VENDOR SPECIFIC]
25 00 06 89 00 40 e0 00 01:04:25.091 READ DMA EXT
ef 03 45 00 00 00 a0 00 01:04:25.090 SET FEATURES [Set transfer mode]
Error 391 occurred at disk power-on lifetime: 272 hours (11 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 06 89 00 40 e8 Error: UNC 6 sectors at LBA = 0x08400089 = 138412169
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 06 89 00 40 e0 00 01:04:25.091 READ DMA EXT
ef 03 45 00 00 00 a0 00 01:04:25.090 SET FEATURES [Set transfer mode]
ff ff ff ff ff ff ff 0c 01:04:25.079 [VENDOR SPECIFIC]
25 00 02 87 00 40 e0 00 01:04:24.829 READ DMA EXT
25 00 06 81 00 40 e0 00 01:04:24.829 READ DMA EXT
Error 390 occurred at disk power-on lifetime: 272 hours (11 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 01 88 00 40 e8 Error: UNC 1 sectors at LBA = 0x08400088 = 138412168
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 02 87 00 40 e0 00 01:04:24.829 READ DMA EXT
25 00 06 81 00 40 e0 00 01:04:24.829 READ DMA EXT
25 00 02 7f 00 40 e0 00 01:04:24.828 READ DMA EXT
25 00 06 79 00 40 e0 00 01:04:24.828 READ DMA EXT
25 00 02 77 00 40 e0 00 01:04:24.806 READ DMA EXT
Error 389 occurred at disk power-on lifetime: 272 hours (11 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 80 3f 00 80 ec Error: UNC 128 sectors at LBA = 0x0c80003f = 209715263
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 80 3f 00 80 e0 00 01:04:17.357 READ DMA EXT
25 00 80 3f 00 40 e0 00 01:04:17.343 READ DMA EXT
25 00 80 3f 00 00 e0 00 01:04:17.332 READ DMA EXT
25 00 80 3f 00 c0 e0 00 01:04:17.317 READ DMA EXT
25 00 80 3f 00 80 e0 00 01:04:17.296 READ DMA EXT
Est ce grave docteur?
