bon, je pense qu'effectivement ma carte est morte car impossible de la trouver non plus sous Windows. Cependant j'ai un autre problème avec des disques dur externe de récup cette fois. L'un de 1To et l'autre de 500Go. Celui de 1To me semble mort car je ne parvient pas non plus à le voir sous Ubuntu, Windows ou même mac. Il produit de petit bruit étrange et ne se connecte jamais malgré la LED bleu allumé. Voici ce que j'obtiens avec la commande
dmesg | tail -30
que tu m'avais donné pour la carte sd (j'imagine que ça marche pareil) :
[ 29.559285] usbcore: registered new interface driver uvcvideo
[ 29.559286] USB Video Class driver (1.1.1)
[ 29.614261] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC270: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 29.614264] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 29.614266] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1a/0x0/0x0/0x0/0x0)
[ 29.614267] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 29.614268] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 29.614270] snd_hda_codec_realtek hdaudioC0D0: Mic=0x19
[ 29.776588] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input23
[ 29.776645] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input24
[ 34.283085] audit: type=1400 audit(1615380810.047:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=701 comm="apparmor_parser"
[ 34.406616] audit: type=1400 audit(1615380810.171:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=703 comm="apparmor_parser"
[ 34.490635] audit: type=1400 audit(1615380810.255:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=704 comm="apparmor_parser"
[ 34.490639] audit: type=1400 audit(1615380810.255:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=704 comm="apparmor_parser"
[ 34.542374] audit: type=1400 audit(1615380810.307:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/freshclam" pid=700 comm="apparmor_parser"
[ 34.732320] audit: type=1400 audit(1615380810.495:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=708 comm="apparmor_parser"
[ 34.732326] audit: type=1400 audit(1615380810.495:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=708 comm="apparmor_parser"
[ 34.732328] audit: type=1400 audit(1615380810.495:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=708 comm="apparmor_parser"
[ 34.732331] audit: type=1400 audit(1615380810.495:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/{,usr/}sbin/dhclient" pid=708 comm="apparmor_parser"
[ 34.961360] audit: type=1400 audit(1615380810.723:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-soffice" pid=706 comm="apparmor_parser"
[ 53.653998] RTL8211E Gigabit Ethernet r8169-302:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=r8169-302:00, irq=IGNORE)
[ 53.807396] r8169 0000:03:00.2 enp3s0f2: Link is Down
[ 56.360408] kauditd_printk_skb: 48 callbacks suppressed
[ 56.360410] audit: type=1400 audit(1615380832.123:60): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=878 comm="cups-browsed" capability=23 capname="sys_nice"
[ 56.484038] r8169 0000:03:00.2 enp3s0f2: Link is Up - 1Gbps/Full - flow control rx/tx
[ 56.484072] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0f2: link becomes ready
[ 72.558592] capability: warning: `proftpd' uses 32-bit capabilities (legacy support in use)
[ 95.854642] rfkill: input handler disabled
[ 126.980168] rfkill: input handler enabled
[ 155.720349] rfkill: input handler disabled
J'ai l'impression qu'il n'y est pas fait mention d'un disque dur connecté...
Pour le second, celui ci est reconnu par tout les OS mais je ne peux l'ouvrir et un message d'erreur apparait, je ne peux pas le formater non plus. Je te mets le retour de la même commande que précédemment :
[ 942.577083] usb 3-1: New USB device found, idVendor=152d, idProduct=2329, bcdDevice= 1.00
[ 942.577091] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=5
[ 942.577095] usb 3-1: Product: USB to ATA/ATAPI bridge
[ 942.577099] usb 3-1: Manufacturer: JMicron
[ 942.577102] usb 3-1: SerialNumber: 7D57861E4143
[ 942.729033] usb-storage 3-1:1.0: USB Mass Storage device detected
[ 942.730073] usb-storage 3-1:1.0: Quirks match for vid 152d pid 2329: 8020
[ 942.730112] scsi host4: usb-storage 3-1:1.0
[ 942.731687] usbcore: registered new interface driver usb-storage
[ 942.754405] usbcore: registered new interface driver uas
[ 943.931291] scsi 4:0:0:0: Direct-Access WDC WD50 00BPVT-00HXZT1 01.0 PQ: 0 ANSI: 2 CCS
[ 943.932564] sd 4:0:0:0: Attached scsi generic sg1 type 0
[ 943.932848] sd 4:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 943.933174] sd 4:0:0:0: [sdb] Write Protect is off
[ 943.933177] sd 4:0:0:0: [sdb] Mode Sense: 28 00 00 00
[ 943.933435] sd 4:0:0:0: [sdb] No Caching mode page found
[ 943.933439] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 943.988621] sdb:
[ 943.989675] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 970.197262] sd 4:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 970.197271] sd 4:0:0:0: [sdb] tag#0 Sense Key : Medium Error [current]
[ 970.197276] sd 4:0:0:0: [sdb] tag#0 Add. Sense: Unrecovered read error
[ 970.197284] sd 4:0:0:0: [sdb] tag#0 CDB: Read(10) 28 00 00 00 01 10 00 00 f0 00
[ 970.197293] blk_update_request: critical medium error, dev sdb, sector 272 op 0x0:(READ) flags 0x80700 phys_seg 24 prio class 0
[ 973.152336] sd 4:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 973.152344] sd 4:0:0:0: [sdb] tag#0 Sense Key : Medium Error [current]
[ 973.152350] sd 4:0:0:0: [sdb] tag#0 Add. Sense: Unrecovered read error
[ 973.152358] sd 4:0:0:0: [sdb] tag#0 CDB: Read(10) 28 00 00 00 01 28 00 00 08 00
[ 973.152366] blk_update_request: critical medium error, dev sdb, sector 296 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 973.152379] Buffer I/O error on dev sdb, logical block 37, async page read
brian@brian-pc:~$
Voilà. merci de ton aide.