Bonjour,
J'ai installé ubuntu (dual boot, a coté de windows 10) il y a quelques semaines maintenant.
Depuis une semaine quand j'allume le pc, une fois que je boot sur Ubuntu, il arrive (aléatoirement) que je tombe sur un écran noir... J’éteins le pc comme un sauvage et je rallume, ubuntu s'ouvre après quelques messages d'erreur qui défile trop rapidement pour que je puisse noter (bien que je pense pouvoir essayer de faire une photo si besoin).
Je suis ce qu'on peut appeler un novice sur Ubuntu (ou autre système hors windows).
Ce n'est rien de bien handicapant mais je suis pas super fan de couper mon pc (quasi neuf) de la sorte fréquemment, donc si une âme charitable peut me venir en aide ça serai très gentil.
Merci par avance
Bonjour,

C'est l'ACER E15 Start (ES1-512-C8XK) mentionné dans > Ordinateur ne s’éteint pas + PAD ne fonctionne pas ?

Tu pourrais redémarrer avec les [doc]touches_magiques[/doc].
Le 15/03/2018, moko138 a écrit (...)
Plutôt que l'extinction mécanique forcée, qui détériore les composants et qui laisse en vrac les systèmes de fichiers des partitions montées, il faut préférer les [doc]touches_magiques[/doc].

(...)

Concrètement, pour redémarrer:
Alt+Sys r e i s (*) u (*) b

(*) attendre quelques secondes.
_ _ _

Rajout de ce fil > [Résolu] installation double boot ubuntu 14.04-2/ windows 8.1
_ _ _

Montre, en te servant du Retour utilisable de commande :
lspci -vnn | grep -A12 '\''[030[02]\]' | grep -Ei "vga|3d|display|kernel"
uname -a
cqfd93 a écritAstuce pour copier / coller sans erreur :
  • triple clic gauche pour sélectionner et copier une ligne entière
  • clic molette pour coller dans le terminal
Bonjour,
Merci du retour
J'ai oublié de donner les infos de ma bête!!! Je suis maintenant sur un Dell inspiron 3505.
C'est noté pour les touches magiques merci.
J'ai lu le sujet indiqué (et je n'ai pas compris grand chose:lol:) mais je n'ai pas l'impression que ca correspond a mon soucis.
Pour ma part 4/5 le pc demarre impeccable et quand ca me met l'écran noir c'est aprés le "boot menu"

Pour la commande demandée:
 pierre@pierre-Inspiron-3505:~$ lspci -vnn | grep -A12 '\''[030[02]\]' | grep -Ei "vga|3d|display|kernel"
04:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Picasso [1002:15d8] (rev c2) (prog-if 00 [VGA controller])
	Kernel driver in use: amdgpu
	Kernel modules: amdgpu
pierre@pierre-Inspiron-3505:~$ uname -a
Linux pierre-Inspiron-3505 5.8.0-44-generic #50~20.04.1-Ubuntu SMP Wed Feb 10 21:07:30 UTC 2021 x86_64 x86_64 x86_64 GNU/Linux
 
Montre d'éventuels paquets cassés :
dpkg -l | grep -v ^ii
pierre@pierre-Inspiron-3505:~$ dpkg -l | grep -v ^ii
Souhait=inconnU/Installé/suppRimé/Purgé/H=à garder
| État=Non/Installé/fichier-Config/dépaqUeté/échec-conFig/H=semi-installé/W=attend-traitement-déclenchements
|/ Err?=(aucune)/besoin Réinstallation (État,Err: majuscule=mauvais)
||/ Nom                                        Version                               Architecture Description
+++-==========================================-=====================================-============-======================================================================================================
rc  deja-dup                                   40.7-0ubuntu1                         amd64        Backup utility
rc  gnome-power-manager                        3.32.0-2                              amd64        power management tool for the GNOME desktop
rc  synaptic                                   0.84.6ubuntu5                         amd64        Graphical package manager
PS : j'ai l'impression que les touches magique ne sont pas activer sur mon PC
Montre :
cat /etc/default/grub
dmesg | grep amdgpu
dmesg | grep firmw
dpkg -l linux-firmware
repris dans > {Résolu] Le bon vieux classique écran noir
pierre@pierre-Inspiron-3505:~$ cat /etc/default/grub
*# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
pierre@pierre-Inspiron-3505:~$ dmesg | grep amdgpu
[    2.420281] [drm] amdgpu kernel modesetting enabled.
[    2.426685] amdgpu: Topology: Add APU node [0x0:0x0]
[    2.426860] fb0: switching to amdgpudrmfb from EFI VGA
[    2.427139] amdgpu 0000:04:00.0: vgaarb: deactivate vga console
[    2.427462] amdgpu 0000:04:00.0: amdgpu: Trusted Memory Zone (TMZ) feature disabled as experimental (default)
[    2.428058] amdgpu: ATOM BIOS: 113-PICASSO-117
[    2.428533] amdgpu 0000:04:00.0: amdgpu: VRAM: 2048M 0x000000F400000000 - 0x000000F47FFFFFFF (2048M used)
[    2.428535] amdgpu 0000:04:00.0: amdgpu: GART: 1024M 0x0000000000000000 - 0x000000003FFFFFFF
[    2.428538] amdgpu 0000:04:00.0: amdgpu: AGP: 267419648M 0x000000F800000000 - 0x0000FFFFFFFFFFFF
[    2.428814] [drm] amdgpu: 2048M of VRAM memory ready
[    2.428824] [drm] amdgpu: 3072M of GTT memory ready.
[    2.503798] amdgpu: hwmgr_sw_init smu backed is smu10_smu
[    2.806262] amdgpu 0000:04:00.0: amdgpu: RAS: optional ras ta ucode is not available
[    2.846364] snd_hda_intel 0000:04:00.1: bound 0000:04:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
[    2.956930] amdgpu: Topology: Add APU node [0x15d8:0x1002]
[    2.956939] amdgpu 0000:04:00.0: amdgpu: SE 1, SH per SE 1, CU per SH 11, active_cu_number 8
[    2.959409] fbcon: amdgpudrmfb (fb0) is primary device
[    2.959516] amdgpu 0000:04:00.0: fb0: amdgpudrmfb frame buffer device
[    2.998455] amdgpu 0000:04:00.0: amdgpu: ring gfx uses VM inv eng 0 on hub 0
[    2.998460] amdgpu 0000:04:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0
[    2.998463] amdgpu 0000:04:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0
[    2.998478] amdgpu 0000:04:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0
[    2.998481] amdgpu 0000:04:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0
[    2.998484] amdgpu 0000:04:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0
[    2.998486] amdgpu 0000:04:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0
[    2.998489] amdgpu 0000:04:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0
[    2.998492] amdgpu 0000:04:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0
[    2.998495] amdgpu 0000:04:00.0: amdgpu: ring kiq_2.1.0 uses VM inv eng 11 on hub 0
[    2.998498] amdgpu 0000:04:00.0: amdgpu: ring sdma0 uses VM inv eng 0 on hub 1
[    2.998500] amdgpu 0000:04:00.0: amdgpu: ring vcn_dec uses VM inv eng 1 on hub 1
[    2.998503] amdgpu 0000:04:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 4 on hub 1
[    2.998505] amdgpu 0000:04:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 5 on hub 1
[    2.998507] amdgpu 0000:04:00.0: amdgpu: ring jpeg_dec uses VM inv eng 6 on hub 1
[    3.079726] [drm] Initialized amdgpu 3.38.0 20150101 for 0000:04:00.0 on minor 0
[    3.115927] WARNING: CPU: 7 PID: 512 at drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link.c:2546 dc_link_set_backlight_level+0x92/0xf0 [amdgpu]
[    3.115927] Modules linked in: amd64_edac_mod(-) btusb btrtl btbcm btintel bluetooth ecdh_generic ecc snd_hda_codec_realtek snd_hda_codec_generic snd_hda_codec_hdmi snd_hda_intel snd_intel_dspcfg joydev snd_hda_codec snd_hda_core edac_mce_amd snd_hwdep dell_laptop ledtrig_audio ath10k_pci kvm_amd dell_smm_hwmon snd_pcm kvm amdgpu ath10k_core crct10dif_pclmul ghash_clmulni_intel uvcvideo iommu_v2 videobuf2_vmalloc snd_seq_midi videobuf2_memops gpu_sched snd_seq_midi_event ath videobuf2_v4l2 aesni_intel dell_wmi mac80211 dell_smbios crypto_simd ttm snd_rawmidi dcdbas cryptd glue_helper input_leds drm_kms_helper rapl sparse_keymap dell_wmi_descriptor videobuf2_common cec wmi_bmof snd_seq serio_raw hid_multitouch efi_pstore videodev rc_core mc snd_seq_device i2c_algo_bit snd_timer fb_sys_fops syscopyarea cfg80211 sysfillrect snd k10temp sysimgblt snd_rn_pci_acp3x libarc4 snd_pci_acp3x ccp soundcore dell_rbtn mac_hid sch_fq_codel parport_pc ppdev lp parport drm ip_tables x_tables autofs4
[    3.116098] RIP: 0010:dc_link_set_backlight_level+0x92/0xf0 [amdgpu]
[    3.116216]  amdgpu_dm_backlight_update_status+0xb9/0xd0 [amdgpu]
pierre@pierre-Inspiron-3505:~$ dmesg | grep firmw
[    2.505935] [drm] Found VCN firmware Version ENC: 1.9 DEC: 1 VEP: 0 Revision: 28
[    2.505966] [drm] PSP loading VCN firmware
[    2.760411] ath10k_pci 0000:03:00.0: firmware ver WLAN.TF.2.1-00021-QCARMSWP-1 api 6 features wowlan,ignore-otp crc32 42e41877
[    3.000414] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
pierre@pierre-Inspiron-3505:~$ dpkg -l linux-firmware
Souhait=inconnU/Installé/suppRimé/Purgé/H=à garder
| État=Non/Installé/fichier-Config/dépaqUeté/échec-conFig/H=semi-installé/W=att>
|/ Err?=(aucune)/besoin Réinstallation (État,Err: majuscule=mauvais)
||/ Nom            Version      Architecture Description
+++-==============-============-============-=================================
ii  linux-firmware 1.187.9      all          Firmware for Linux kernel drivers
lines 1-6/6 (END)
Bonjour,

Il faut attendre les conseils d'aidants connaisseurs.
Ok je vais attendre les conseils 🙂

Merci