Bonsoir!
Voici les retours, pendant que je suis en basse résolution, avec les drivers propriétaires installés:
dmesg
[ 0.000000] microcode: microcode updated early to revision 0x21, date = 2019-02-13
[ 0.000000] Linux version 5.8.0-44-generic (buildd@lgw01-amd64-054) (gcc (Ubuntu 9.3.0-17ubuntu1~20.04) 9.3.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #50~20.04.1-Ubuntu SMP Wed Feb 10 21:07:30 UTC 2021 (Ubuntu 5.8.0-44.50~20.04.1-generic 5.8.18)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.8.0-44-generic root=UUID=856b3dc0-e042-4095-9fdd-0893bec759d6 ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Hygon HygonGenuine
[ 0.000000] Centaur CentaurHauls
[ 0.000000] zhaoxin Shanghai
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dd34ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dd350000-0x00000000dd64ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dd650000-0x00000000dd65ffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000dd660000-0x00000000dd77efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000dd77f000-0x00000000de7d8fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000de7d9000-0x00000000de7d9fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000de7da000-0x00000000de81cfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000de81d000-0x00000000dec50fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dec51000-0x00000000deff3fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000deff4000-0x00000000deffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000039effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: update [mem 0x95e78018-0x95e97857] usable ==> usable
[ 0.000000] e820: update [mem 0x95e78018-0x95e97857] usable ==> usable
[ 0.000000] e820: update [mem 0x95e6a018-0x95e77057] usable ==> usable
[ 0.000000] e820: update [mem 0x95e6a018-0x95e77057] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009efff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000009f000-0x000000000009ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000095e6a017] usable
[ 0.000000] reserve setup_data: [mem 0x0000000095e6a018-0x0000000095e77057] usable
[ 0.000000] reserve setup_data: [mem 0x0000000095e77058-0x0000000095e78017] usable
[ 0.000000] reserve setup_data: [mem 0x0000000095e78018-0x0000000095e97857] usable
[ 0.000000] reserve setup_data: [mem 0x0000000095e97858-0x00000000dd34ffff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000dd350000-0x00000000dd64ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000dd650000-0x00000000dd65ffff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x00000000dd660000-0x00000000dd77efff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000dd77f000-0x00000000de7d8fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000de7d9000-0x00000000de7d9fff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000de7da000-0x00000000de81cfff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000de81d000-0x00000000dec50fff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000dec51000-0x00000000deff3fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000deff4000-0x00000000deffffff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000039effffff] usable
[ 0.000000] efi: EFI v2.31 by American Megatrends
[ 0.000000] efi: ACPI=0xdd653000 ACPI 2.0=0xdd653000 SMBIOS=0xf04c0
[ 0.000000] secureboot: Secure boot disabled
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: System manufacturer System Product Name/B75M-PLUS, BIOS 1001 07/07/2014
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3192.777 MHz processor
[ 0.000714] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000715] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000721] last_pfn = 0x39f000 max_arch_pfn = 0x400000000
[ 0.000724] MTRR default type: uncachable
[ 0.000725] MTRR fixed ranges enabled:
[ 0.000726] 00000-9FFFF write-back
[ 0.000726] A0000-BFFFF uncachable
[ 0.000727] C0000-CFFFF write-protect
[ 0.000728] D0000-DFFFF uncachable
[ 0.000728] E0000-FFFFF write-protect
[ 0.000729] MTRR variable ranges enabled:
[ 0.000730] 0 base 000000000 mask E00000000 write-back
[ 0.000730] 1 base 200000000 mask F00000000 write-back
[ 0.000731] 2 base 300000000 mask F80000000 write-back
[ 0.000732] 3 base 380000000 mask FF0000000 write-back
[ 0.000732] 4 base 390000000 mask FF8000000 write-back
[ 0.000733] 5 base 398000000 mask FFC000000 write-back
[ 0.000734] 6 base 39C000000 mask FFE000000 write-back
[ 0.000734] 7 base 39E000000 mask FFF000000 write-back
[ 0.000735] 8 base 0E0000000 mask FE0000000 uncachable
[ 0.000735] 9 disabled
[ 0.000987] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.001096] total RAM covered: 14320M
[ 0.001381] Found optimal setting for mtrr clean up
[ 0.001381] gran_size: 64K chunk_size: 2G num_reg: 7 lose cover RAM: 0G
[ 0.001627] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[ 0.001629] last_pfn = 0xdf000 max_arch_pfn = 0x400000000
[ 0.009124] found SMP MP-table at [mem 0x000fd770-0x000fd77f]
[ 0.009159] check: Scanning 1 areas for low memory corruption
[ 0.009646] secureboot: Secure boot disabled
[ 0.009647] RAMDISK: [mem 0x369bd000-0x3d484fff]
[ 0.009655] ACPI: Early table checksum verification disabled
[ 0.009658] ACPI: RSDP 0x00000000DD653000 000024 (v02 ALASKA)
[ 0.009661] ACPI: XSDT 0x00000000DD653080 000074 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.009666] ACPI: FACP 0x00000000DD65DFB8 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.009671] ACPI: DSDT 0x00000000DD653188 00AE2A (v02 ALASKA A M I 00000022 INTL 20051117)
[ 0.009674] ACPI: FACS 0x00000000DD77D080 000040
[ 0.009676] ACPI: APIC 0x00000000DD65E0C8 000062 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.009678] ACPI: FPDT 0x00000000DD65E130 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.009680] ACPI: ASF! 0x00000000DD65E178 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 0.009683] ACPI: MCFG 0x00000000DD65E220 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.009685] ACPI: HPET 0x00000000DD65E260 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
[ 0.009687] ACPI: SSDT 0x00000000DD65E298 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
[ 0.009689] ACPI: BGRT 0x00000000DD65FAA8 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
[ 0.009692] ACPI: SSDT 0x00000000DD65E660 0009AA (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.009694] ACPI: SSDT 0x00000000DD65F010 000A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.009702] ACPI: Local APIC address 0xfee00000
[ 0.009775] No NUMA configuration found
[ 0.009775] Faking a node at [mem 0x0000000000000000-0x000000039effffff]
[ 0.009785] NODE_DATA(0) allocated [mem 0x39efcb000-0x39eff4fff]
[ 0.010124] Zone ranges:
[ 0.010124] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.010125] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.010126] Normal [mem 0x0000000100000000-0x000000039effffff]
[ 0.010127] Device empty
[ 0.010127] Movable zone start for each node
[ 0.010130] Early memory node ranges
[ 0.010131] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.010132] node 0: [mem 0x0000000000100000-0x00000000dd34ffff]
[ 0.010132] node 0: [mem 0x00000000de7d9000-0x00000000de7d9fff]
[ 0.010133] node 0: [mem 0x00000000de81d000-0x00000000dec50fff]
[ 0.010133] node 0: [mem 0x00000000deff4000-0x00000000deffffff]
[ 0.010134] node 0: [mem 0x0000000100000000-0x000000039effffff]
[ 0.010256] Zeroed struct page in unavailable ranges: 14545 pages
[ 0.010256] Initmem setup node 0 [mem 0x0000000000001000-0x000000039effffff]
[ 0.010257] On node 0 totalpages: 3655471
[ 0.010258] DMA zone: 64 pages used for memmap
[ 0.010259] DMA zone: 25 pages reserved
[ 0.010259] DMA zone: 3998 pages, LIFO batch:0
[ 0.010283] DMA32 zone: 14111 pages used for memmap
[ 0.010284] DMA32 zone: 903057 pages, LIFO batch:63
[ 0.017018] Normal zone: 42944 pages used for memmap
[ 0.017020] Normal zone: 2748416 pages, LIFO batch:63
[ 0.037743] ACPI: PM-Timer IO Port: 0x408
[ 0.037746] ACPI: Local APIC address 0xfee00000
[ 0.037753] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.037765] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.037767] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.037768] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.037769] ACPI: IRQ0 used by override.
[ 0.037770] ACPI: IRQ9 used by override.
[ 0.037771] Using ACPI (MADT) for SMP configuration information
[ 0.037772] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.037777] efi_bgrt: Ignoring BGRT: invalid image address
[ 0.037779] TSC deadline timer available
[ 0.037781] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.037802] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.037804] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.037804] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.037805] PM: hibernation: Registered nosave memory: [mem 0x95e6a000-0x95e6afff]
[ 0.037807] PM: hibernation: Registered nosave memory: [mem 0x95e77000-0x95e77fff]
[ 0.037807] PM: hibernation: Registered nosave memory: [mem 0x95e78000-0x95e78fff]
[ 0.037809] PM: hibernation: Registered nosave memory: [mem 0x95e97000-0x95e97fff]
[ 0.037810] PM: hibernation: Registered nosave memory: [mem 0xdd350000-0xdd64ffff]
[ 0.037811] PM: hibernation: Registered nosave memory: [mem 0xdd650000-0xdd65ffff]
[ 0.037811] PM: hibernation: Registered nosave memory: [mem 0xdd660000-0xdd77efff]
[ 0.037811] PM: hibernation: Registered nosave memory: [mem 0xdd77f000-0xde7d8fff]
[ 0.037813] PM: hibernation: Registered nosave memory: [mem 0xde7da000-0xde81cfff]
[ 0.037814] PM: hibernation: Registered nosave memory: [mem 0xdec51000-0xdeff3fff]
[ 0.037816] PM: hibernation: Registered nosave memory: [mem 0xdf000000-0xf7ffffff]
[ 0.037816] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.037817] PM: hibernation: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.037817] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.037818] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.037818] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.037818] PM: hibernation: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.037819] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.037819] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.037820] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.037820] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.037821] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.037822] [mem 0xdf000000-0xf7ffffff] available for PCI devices
[ 0.037823] Booting paravirtualized kernel on bare hardware
[ 0.037826] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.037833] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[ 0.037992] percpu: Embedded 56 pages/cpu s192512 r8192 d28672 u1048576
[ 0.037998] pcpu-alloc: s192512 r8192 d28672 u1048576 alloc=1*2097152
[ 0.037999] pcpu-alloc: [0] 0 1
[ 0.038025] Built 1 zonelists, mobility grouping on. Total pages: 3598327
[ 0.038026] Policy zone: Normal
[ 0.038027] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.8.0-44-generic root=UUID=856b3dc0-e042-4095-9fdd-0893bec759d6 ro quiet splash vt.handoff=7
[ 0.038907] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ 0.039313] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.039342] mem auto-init: stack:off, heap alloc:on, heap free:off
[ 0.080026] Memory: 13947304K/14621884K available (14339K kernel code, 2537K rwdata, 5388K rodata, 2640K init, 4920K bss, 674580K reserved, 0K cma-reserved)
[ 0.080032] random: get_random_u64 called from kmem_cache_open+0x2d/0x410 with crng_init=0
[ 0.080132] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.080142] Kernel/User page tables isolation: enabled
[ 0.080156] ftrace: allocating 46218 entries in 181 pages
[ 0.094250] ftrace: allocated 181 pages with 5 groups
[ 0.094349] rcu: Hierarchical RCU implementation.
[ 0.094350] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=2.
[ 0.094351] Trampoline variant of Tasks RCU enabled.
[ 0.094351] Rude variant of Tasks RCU enabled.
[ 0.094351] Tracing variant of Tasks RCU enabled.
[ 0.094352] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.094352] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.097387] NR_IRQS: 524544, nr_irqs: 440, preallocated irqs: 16
[ 0.097615] vt handoff: transparent VT on vt#7
[ 0.097621] Console: colour dummy device 80x25
[ 0.097626] printk: console [tty0] enabled
[ 0.097641] ACPI: Core revision 20200528
[ 0.097729] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.097741] APIC: Switch to symmetric I/O mode setup
[ 0.098126] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.117740] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2e05a2ba2b8, max_idle_ns: 440795288737 ns
[ 0.117744] Calibrating delay loop (skipped), value calculated using timer frequency.. 6385.55 BogoMIPS (lpj=12771108)
[ 0.117746] pid_max: default: 32768 minimum: 301
[ 0.123517] LSM: Security Framework initializing
[ 0.123526] Yama: becoming mindful.
[ 0.123554] AppArmor: AppArmor initialized
[ 0.123610] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.123646] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.123878] mce: CPU0: Thermal monitoring enabled (TM1)
[ 0.123885] process: using mwait in idle threads
[ 0.123887] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.123888] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.123891] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.123892] Spectre V2 : Mitigation: Full generic retpoline
[ 0.123893] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.123893] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.123894] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.123895] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.123897] MDS: Mitigation: Clear CPU buffers
[ 0.124074] Freeing SMP alternatives memory: 40K
[ 0.125816] smpboot: CPU0: Intel(R) Pentium(R) CPU G2130 @ 3.20GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[ 0.125905] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.125911] ... version: 3
[ 0.125911] ... bit width: 48
[ 0.125911] ... generic registers: 8
[ 0.125912] ... value mask: 0000ffffffffffff
[ 0.125912] ... max period: 00007fffffffffff
[ 0.125913] ... fixed-purpose events: 3
[ 0.125913] ... event mask: 00000007000000ff
[ 0.125944] rcu: Hierarchical SRCU implementation.
[ 0.126572] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.126600] smp: Bringing up secondary CPUs ...
[ 0.126685] x86: Booting SMP configuration:
[ 0.126686] .... node #0, CPUs: #1
[ 0.129792] smp: Brought up 1 node, 2 CPUs
[ 0.129792] smpboot: Max logical packages: 1
[ 0.129792] smpboot: Total of 2 processors activated (12771.10 BogoMIPS)
[ 0.130552] devtmpfs: initialized
[ 0.130552] x86/mm: Memory block size: 128MB
[ 0.130679] PM: Registering ACPI NVS region [mem 0xdd660000-0xdd77efff] (1175552 bytes)
[ 0.130691] PM: Registering ACPI NVS region [mem 0xde7da000-0xde81cfff] (274432 bytes)
[ 0.130750] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.130750] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 0.130750] pinctrl core: initialized pinctrl subsystem
[ 0.130750] PM: RTC time: 20:46:01, date: 2021-03-14
[ 0.130750] thermal_sys: Registered thermal governor 'fair_share'
[ 0.130750] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.130750] thermal_sys: Registered thermal governor 'step_wise'
[ 0.130750] thermal_sys: Registered thermal governor 'user_space'
[ 0.130750] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.130750] NET: Registered protocol family 16
[ 0.130750] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[ 0.130750] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.130750] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.130750] audit: initializing netlink subsys (disabled)
[ 0.130750] audit: type=2000 audit(1615754761.032:1): state=initialized audit_enabled=0 res=1
[ 0.130750] EISA bus registered
[ 0.130750] cpuidle: using governor ladder
[ 0.130750] cpuidle: using governor menu
[ 0.130750] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.130750] ACPI: bus type PCI registered
[ 0.130750] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.130750] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.130750] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.130750] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
[ 0.130750] PCI: Using configuration type 1 for base access
[ 0.130750] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
[ 0.130750] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.134142] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.134142] ACPI: Added _OSI(Module Device)
[ 0.134142] ACPI: Added _OSI(Processor Device)
[ 0.134142] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.134142] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.134142] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.134142] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.134142] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.141728] ACPI: 4 ACPI AML tables successfully acquired and loaded
[ 0.143217] ACPI: Dynamic OEM Table Load:
[ 0.143222] ACPI: SSDT 0xFFFF9A754F2F4000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.144020] ACPI: Dynamic OEM Table Load:
[ 0.144023] ACPI: SSDT 0xFFFF9A754E405400 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.144627] ACPI: Dynamic OEM Table Load:
[ 0.144629] ACPI: SSDT 0xFFFF9A754E911800 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.145700] ACPI: Interpreter enabled
[ 0.145718] ACPI: (supports S0 S3 S4 S5)
[ 0.145719] ACPI: Using IOAPIC for interrupt routing
[ 0.145747] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.146089] ACPI: Enabled 10 GPEs in block 00 to 3F
[ 0.153327] ACPI: Power Resource [FN00] (off)
[ 0.153405] ACPI: Power Resource [FN01] (off)
[ 0.153479] ACPI: Power Resource [FN02] (off)
[ 0.153555] ACPI: Power Resource [FN03] (off)
[ 0.153628] ACPI: Power Resource [FN04] (off)
[ 0.154303] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.154308] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.154605] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME]
[ 0.154795] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR]
[ 0.154795] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.155321] PCI host bridge to bus 0000:00
[ 0.155322] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.155323] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.155324] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.155325] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.155326] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.155327] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.155328] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.155328] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff window]
[ 0.155329] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.155337] pci 0000:00:00.0: [8086:0150] type 00 class 0x060000
[ 0.155420] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[ 0.155453] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.155555] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.155577] pci 0000:00:14.0: reg 0x10: [mem 0xf7200000-0xf720ffff 64bit]
[ 0.155642] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.155724] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.155747] pci 0000:00:16.0: reg 0x10: [mem 0xf721b000-0xf721b00f 64bit]
[ 0.155817] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.155895] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.155915] pci 0000:00:1a.0: reg 0x10: [mem 0xf7218000-0xf72183ff]
[ 0.155993] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.156077] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.156094] pci 0000:00:1b.0: reg 0x10: [mem 0xf7210000-0xf7213fff 64bit]
[ 0.156157] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.156245] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.156403] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.156514] pci 0000:00:1c.4: [8086:1e18] type 01 class 0x060400
[ 0.156602] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.156693] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.156713] pci 0000:00:1d.0: reg 0x10: [mem 0xf7217000-0xf72173ff]
[ 0.156791] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.156868] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.156994] pci 0000:00:1f.0: [8086:1e49] type 00 class 0x060100
[ 0.157167] pci 0000:00:1f.2: [8086:1e02] type 00 class 0x010601
[ 0.157182] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077]
[ 0.157188] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063]
[ 0.157194] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057]
[ 0.157200] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043]
[ 0.157206] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
[ 0.157213] pci 0000:00:1f.2: reg 0x24: [mem 0xf7216000-0xf72167ff]
[ 0.157249] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.157323] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.157339] pci 0000:00:1f.3: reg 0x10: [mem 0xf7215000-0xf72150ff 64bit]
[ 0.157357] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
[ 0.157475] pci 0000:01:00.0: [10de:1c82] type 00 class 0x030000
[ 0.157491] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[ 0.157499] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.157508] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.157513] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.157519] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[ 0.157523] pci 0000:01:00.0: enabling Extended Tags
[ 0.157534] pci 0000:01:00.0: BAR 3: assigned to efifb
[ 0.157596] pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x16 link at 0000:00:01.0 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link)
[ 0.157629] pci 0000:01:00.1: [10de:0fb9] type 00 class 0x040300
[ 0.157640] pci 0000:01:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
[ 0.157665] pci 0000:01:00.1: enabling Extended Tags
[ 0.157754] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.157755] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.157757] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.157759] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.157822] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.157895] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[ 0.157930] pci 0000:03:00.0: reg 0x10: [io 0xd000-0xd0ff]
[ 0.157962] pci 0000:03:00.0: reg 0x18: [mem 0xf7100000-0xf7100fff 64bit]
[ 0.157982] pci 0000:03:00.0: reg 0x20: [mem 0xf2100000-0xf2103fff 64bit pref]
[ 0.158114] pci 0000:03:00.0: supports D1 D2
[ 0.158114] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.158265] pci 0000:00:1c.4: PCI bridge to [bus 03]
[ 0.158268] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.158271] pci 0000:00:1c.4: bridge window [mem 0xf7100000-0xf71fffff]
[ 0.158275] pci 0000:00:1c.4: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[ 0.158293] pci_bus 0000:04: extended config space not accessible
[ 0.158336] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
[ 0.158344] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.158345] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.158346] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.158347] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[ 0.158347] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[ 0.158348] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[ 0.158349] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[ 0.158350] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xfeafffff window] (subtractive decode)
[ 0.158974] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.159037] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.159099] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 *14 15)
[ 0.159161] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.159222] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.159283] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 *15)
[ 0.159344] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.159405] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 *6 10 11 12 14 15)
[ 0.159732] iommu: Default domain type: Translated
[ 0.159732] SCSI subsystem initialized
[ 0.159732] libata version 3.00 loaded.
[ 0.159732] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[ 0.159732] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.159732] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.159732] vgaarb: loaded
[ 0.159732] ACPI: bus type USB registered
[ 0.159732] usbcore: registered new interface driver usbfs
[ 0.159732] usbcore: registered new interface driver hub
[ 0.159732] usbcore: registered new device driver usb
[ 0.159732] pps_core: LinuxPPS API ver. 1 registered
[ 0.159732] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.159732] PTP clock support registered
[ 0.159732] EDAC MC: Ver: 3.0.0
[ 0.159732] Registered efivars operations
[ 0.159732] NetLabel: Initializing
[ 0.159732] NetLabel: domain hash size = 128
[ 0.159732] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.159732] NetLabel: unlabeled traffic allowed by default
[ 0.159732] PCI: Using ACPI for IRQ routing
[ 0.161779] PCI: pci_cache_line_size set to 64 bytes
[ 0.161816] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ 0.161817] e820: reserve RAM buffer [mem 0x95e6a018-0x97ffffff]
[ 0.161818] e820: reserve RAM buffer [mem 0x95e78018-0x97ffffff]
[ 0.161819] e820: reserve RAM buffer [mem 0xdd350000-0xdfffffff]
[ 0.161820] e820: reserve RAM buffer [mem 0xde7da000-0xdfffffff]
[ 0.161820] e820: reserve RAM buffer [mem 0xdec51000-0xdfffffff]
[ 0.161821] e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
[ 0.161822] e820: reserve RAM buffer [mem 0x39f000000-0x39fffffff]
[ 0.162301] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.162305] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.164326] clocksource: Switched to clocksource tsc-early
[ 0.173871] VFS: Disk quotas dquot_6.6.0
[ 0.173884] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.173978] AppArmor: AppArmor Filesystem Enabled
[ 0.174005] pnp: PnP ACPI init
[ 0.174136] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.174141] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.174228] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.174231] system 00:01: [io 0x1000-0x100f] has been reserved
[ 0.174232] system 00:01: [io 0xffff] has been reserved
[ 0.174233] system 00:01: [io 0xffff] has been reserved
[ 0.174234] system 00:01: [io 0x0400-0x0453] has been reserved
[ 0.174235] system 00:01: [io 0x0458-0x047f] has been reserved
[ 0.174236] system 00:01: [io 0x0500-0x057f] has been reserved
[ 0.174237] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.174240] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.174263] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.174312] system 00:03: [io 0x0454-0x0457] has been reserved
[ 0.174315] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.174413] system 00:04: [io 0x0290-0x029f] has been reserved
[ 0.174416] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.174707] pnp 00:05: [dma 0 disabled]
[ 0.174803] pnp 00:05: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.174853] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.174857] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.175097] pnp 00:07: [dma 0 disabled]
[ 0.175133] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.175352] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.175353] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.175354] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.175355] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.175357] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.175358] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.175359] system 00:08: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.175360] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.175361] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
[ 0.175362] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.175363] system 00:08: [mem 0xf2200000-0xf2200fff] has been reserved
[ 0.175366] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.175509] pnp: PnP ACPI: found 9 devices
[ 0.181031] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.181082] NET: Registered protocol family 2
[ 0.181229] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 0.181300] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.181484] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.181589] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.181679] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.181715] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.181785] NET: Registered protocol family 1
[ 0.181788] NET: Registered protocol family 44
[ 0.181799] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.181802] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.181804] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.181805] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.181808] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.181824] pci 0000:00:1c.4: PCI bridge to [bus 03]
[ 0.181826] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.181830] pci 0000:00:1c.4: bridge window [mem 0xf7100000-0xf71fffff]
[ 0.181833] pci 0000:00:1c.4: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[ 0.181837] pci 0000:00:1e.0: PCI bridge to [bus 04]
[ 0.181846] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.181847] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.181848] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.181849] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[ 0.181850] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[ 0.181851] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[ 0.181852] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[ 0.181853] pci_bus 0000:00: resource 11 [mem 0xe0000000-0xfeafffff window]
[ 0.181854] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.181855] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
[ 0.181856] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.181857] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.181857] pci_bus 0000:03: resource 1 [mem 0xf7100000-0xf71fffff]
[ 0.181858] pci_bus 0000:03: resource 2 [mem 0xf2100000-0xf21fffff 64bit pref]
[ 0.181859] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window]
[ 0.181860] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window]
[ 0.181861] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.181862] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000d3fff window]
[ 0.181863] pci_bus 0000:04: resource 8 [mem 0x000d4000-0x000d7fff window]
[ 0.181864] pci_bus 0000:04: resource 9 [mem 0x000d8000-0x000dbfff window]
[ 0.181865] pci_bus 0000:04: resource 10 [mem 0x000dc000-0x000dffff window]
[ 0.181866] pci_bus 0000:04: resource 11 [mem 0xe0000000-0xfeafffff window]
[ 0.205852] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x670 took 23151 usecs
[ 0.229847] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x670 took 23420 usecs
[ 0.229865] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.229875] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
[ 0.229882] pci 0000:03:00.0: CLS mismatch (64 != 32), using 64 bytes
[ 0.229951] Trying to unpack rootfs image as initramfs...
[ 0.425601] Freeing initrd memory: 109344K
[ 0.425663] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.425665] software IO TLB: mapped [mem 0xcc15c000-0xd015c000] (64MB)
[ 0.425834] check: Scanning for low memory corruption every 60 seconds
[ 0.426167] Initialise system trusted keyrings
[ 0.426175] Key type blacklist registered
[ 0.426200] workingset: timestamp_bits=36 max_order=22 bucket_order=0
[ 0.427224] zbud: loaded
[ 0.427424] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.427541] fuse: init (API version 7.31)
[ 0.427644] integrity: Platform Keyring initialized
[ 0.436738] Key type asymmetric registered
[ 0.436739] Asymmetric key parser 'x509' registered
[ 0.436747] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[ 0.436774] io scheduler mq-deadline registered
[ 0.437320] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.437361] efifb: probing for efifb
[ 0.437375] efifb: No BGRT, not showing boot graphics
[ 0.437376] efifb: framebuffer at 0xf1000000, using 3072k, total 3072k
[ 0.437376] efifb: mode is 1024x768x32, linelength=4096, pages=1
[ 0.437377] efifb: scrolling: redraw
[ 0.437378] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.437409] fbcon: Deferring console take-over
[ 0.437410] fb0: EFI VGA frame buffer device
[ 0.437417] intel_idle: MWAIT substates: 0x1120
[ 0.437417] intel_idle: v0.5.1 model 0x3A
[ 0.437489] intel_idle: Local APIC timer is reliable in all C-states
[ 0.437585] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.437602] ACPI: Power Button [PWRB]
[ 0.437628] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.437652] ACPI: Power Button [PWRF]
[ 0.438270] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.438270] ACPI: Thermal Zone [TZ00] (28 C)
[ 0.438530] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.438531] ACPI: Thermal Zone [TZ01] (30 C)
[ 0.438668] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.459165] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.460684] Linux agpgart interface v0.103
[ 0.462014] loop: module loaded
[ 0.462241] libphy: Fixed MDIO Bus: probed
[ 0.462242] tun: Universal TUN/TAP device driver, 1.6
[ 0.462262] PPP generic driver version 2.4.2
[ 0.462299] VFIO - User Level meta-driver version: 0.3
[ 0.462353] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.462355] ehci-pci: EHCI PCI platform driver
[ 0.462502] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.462506] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.462516] ehci-pci 0000:00:1a.0: debug port 2
[ 0.466422] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.466432] ehci-pci 0000:00:1a.0: irq 23, io mem 0xf7218000
[ 0.481774] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.481838] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08
[ 0.481839] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.481840] usb usb1: Product: EHCI Host Controller
[ 0.481841] usb usb1: Manufacturer: Linux 5.8.0-44-generic ehci_hcd
[ 0.481842] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.482027] hub 1-0:1.0: USB hub found
[ 0.482033] hub 1-0:1.0: 2 ports detected
[ 0.482238] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.482241] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.482250] ehci-pci 0000:00:1d.0: debug port 2
[ 0.486136] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.486139] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7217000
[ 0.501774] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.501837] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08
[ 0.501838] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.501839] usb usb2: Product: EHCI Host Controller
[ 0.501840] usb usb2: Manufacturer: Linux 5.8.0-44-generic ehci_hcd
[ 0.501840] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.501992] hub 2-0:1.0: USB hub found
[ 0.501998] hub 2-0:1.0: 2 ports detected
[ 0.502125] ehci-platform: EHCI generic platform driver
[ 0.502133] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.502136] ohci-pci: OHCI PCI platform driver
[ 0.502143] ohci-platform: OHCI generic platform driver
[ 0.502148] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.502179] i8042: PNP: No PS/2 controller found.
[ 0.502328] mousedev: PS/2 mouse device common for all mice
[ 0.502603] rtc_cmos 00:02: RTC can wake from S4
[ 0.502769] rtc_cmos 00:02: registered as rtc0
[ 0.502795] rtc_cmos 00:02: setting system clock to 2021-03-14T20:46:01 UTC (1615754761)
[ 0.502808] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.502813] i2c /dev entries driver
[ 0.502850] device-mapper: uevent: version 1.0.3
[ 0.502890] device-mapper: ioctl: 4.42.0-ioctl (2020-02-27) initialised: dm-devel@redhat.com
[ 0.502906] platform eisa.0: Probing EISA bus 0
[ 0.502908] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 0.502909] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 0.502909] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 0.502910] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 0.502911] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 0.502912] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 0.502912] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 0.502913] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 0.502914] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 0.502915] platform eisa.0: EISA: Detected 0 cards
[ 0.502919] intel_pstate: Intel P-state driver initializing
[ 0.503020] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.503023] EFI Variables Facility v0.08 2004-May-17
[ 0.513384] drop_monitor: Initializing network drop monitor service
[ 0.513642] NET: Registered protocol family 10
[ 0.519935] Segment Routing with IPv6
[ 0.519963] NET: Registered protocol family 17
[ 0.519999] Key type dns_resolver registered
[ 0.520184] microcode: sig=0x306a9, pf=0x2, revision=0x21
[ 0.520213] microcode: Microcode Update Driver: v2.2.
[ 0.520217] IPI shorthand broadcast: enabled
[ 0.520226] sched_clock: Marking stable (520047058, 161643)->(539402121, -19193420)
[ 0.520285] registered taskstats version 1
[ 0.520297] Loading compiled-in X.509 certificates
[ 0.521079] Loaded X.509 cert 'Build time autogenerated kernel key: a3e9eb9032099963d398e4d4d5991ce491952397'
[ 0.521103] zswap: loaded using pool lzo/zbud
[ 0.521178] Key type ._fscrypt registered
[ 0.521179] Key type .fscrypt registered
[ 0.521180] Key type fscrypt-provisioning registered
[ 0.523681] Key type encrypted registered
[ 0.523684] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.524538] integrity: Loading X.509 certificate: UEFI:MokListRT
[ 0.524563] integrity: Loaded X.509 cert 'SomeOrg: shim: a01ee84e9b37ace407961cc468c5909447878469'
[ 0.524564] integrity: Loading X.509 certificate: UEFI:MokListRT
[ 0.524807] integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63'
[ 0.525023] ima: No TPM chip found, activating TPM-bypass!
[ 0.525027] ima: Allocated hash algorithm: sha1
[ 0.525033] ima: No architecture policies found
[ 0.525041] evm: Initialising EVM extended attributes:
[ 0.525042] evm: security.selinux
[ 0.525042] evm: security.SMACK64
[ 0.525043] evm: security.SMACK64EXEC
[ 0.525043] evm: security.SMACK64TRANSMUTE
[ 0.525043] evm: security.SMACK64MMAP
[ 0.525044] evm: security.apparmor
[ 0.525044] evm: security.ima
[ 0.525044] evm: security.capability
[ 0.525045] evm: HMAC attrs: 0x1
[ 0.525313] PM: Magic number: 13:391:801
[ 0.525356] acpi PNP0F03:00: hash matches
[ 0.525452] RAS: Correctable Errors collector initialized.
[ 0.526421] Freeing unused decrypted memory: 2040K
[ 0.526763] Freeing unused kernel image (initmem) memory: 2640K
[ 0.545839] Write protecting the kernel read-only data: 22528k
[ 0.546532] Freeing unused kernel image (text/rodata gap) memory: 2044K
[ 0.546782] Freeing unused kernel image (rodata/data gap) memory: 756K
[ 0.641050] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.641051] x86/mm: Checking user space page tables
[ 0.732222] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.732262] Run /init as init process
[ 0.732265] with arguments:
[ 0.732266] /init
[ 0.732267] splash
[ 0.732268] with environment:
[ 0.732268] HOME=/
[ 0.732269] TERM=linux
[ 0.732270] BOOT_IMAGE=/boot/vmlinuz-5.8.0-44-generic
[ 0.817857] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 0.835784] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 0.836731] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20200528/utaddress-204)
[ 0.836735] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 0.836737] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20200528/utaddress-204)
[ 0.836739] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 0.836740] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20200528/utaddress-204)
[ 0.836742] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 0.836743] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20200528/utaddress-204)
[ 0.836744] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 0.836745] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 0.836888] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.836893] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 0.837756] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 0.837964] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x000000000000b930
[ 0.837968] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.838095] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08
[ 0.838096] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.838097] usb usb3: Product: xHCI Host Controller
[ 0.838098] usb usb3: Manufacturer: Linux 5.8.0-44-generic xhci-hcd
[ 0.838099] usb usb3: SerialNumber: 0000:00:14.0
[ 0.838191] hub 3-0:1.0: USB hub found
[ 0.838199] hub 3-0:1.0: 4 ports detected
[ 0.838578] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.838580] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 0.838582] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 0.838610] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.08
[ 0.838611] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.838612] usb usb4: Product: xHCI Host Controller
[ 0.838613] usb usb4: Manufacturer: Linux 5.8.0-44-generic xhci-hcd
[ 0.838614] usb usb4: SerialNumber: 0000:00:14.0
[ 0.838682] hub 4-0:1.0: USB hub found
[ 0.838689] hub 4-0:1.0: 4 ports detected
[ 0.841084] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 0.843723] ahci 0000:00:1f.2: version 3.0
[ 0.844083] i2c i2c-0: 4/4 memory slots populated (from DMI)
[ 0.844453] i2c i2c-0: Successfully instantiated SPD at 0x50
[ 0.844868] i2c i2c-0: Successfully instantiated SPD at 0x51
[ 0.845285] i2c i2c-0: Successfully instantiated SPD at 0x52
[ 0.845618] i2c i2c-0: Successfully instantiated SPD at 0x53
[ 0.857692] cryptd: max_cpu_qlen set to 1000
[ 0.858048] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x2e impl SATA mode
[ 0.858050] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
[ 0.860707] libphy: r8169: probed
[ 0.860881] r8169 0000:03:00.0 eth0: RTL8168g/8111g, bc:ee:7b:9d:b4:f8, XID 4c0, IRQ 29
[ 0.860883] r8169 0000:03:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[ 0.898248] r8169 0000:03:00.0 enp3s0: renamed from eth0
[ 0.900957] scsi host0: ahci
[ 0.906263] scsi host1: ahci
[ 0.906419] scsi host2: ahci
[ 0.906545] scsi host3: ahci
[ 0.906679] scsi host4: ahci
[ 0.906802] scsi host5: ahci
[ 0.906836] ata1: DUMMY
[ 0.906838] ata2: SATA max UDMA/133 abar m2048@0xf7216000 port 0xf7216180 irq 28
[ 0.906840] ata3: SATA max UDMA/133 abar m2048@0xf7216000 port 0xf7216200 irq 28
[ 0.906841] ata4: SATA max UDMA/133 abar m2048@0xf7216000 port 0xf7216280 irq 28
[ 0.906842] ata5: DUMMY
[ 0.906843] ata6: SATA max UDMA/133 abar m2048@0xf7216000 port 0xf7216380 irq 28
[ 0.974113] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 0.974115] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 0.974363] hub 1-1:1.0: USB hub found
[ 0.974461] hub 1-1:1.0: 6 ports detected
[ 0.994113] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 0.994115] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 0.994367] hub 2-1:1.0: USB hub found
[ 0.994461] hub 2-1:1.0: 6 ports detected
[ 1.157761] usb 3-3: new high-speed USB device number 2 using xhci_hcd
[ 1.207430] nvidia: loading out-of-tree module taints kernel.
[ 1.207438] nvidia: module license 'NVIDIA' taints kernel.
[ 1.207439] Disabling lock debugging due to kernel taint
[ 1.207620] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.207656] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.207679] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.207692] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.207860] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT3._GTF.DSSP], AE_NOT_FOUND (20200528/psargs-330)
[ 1.207869] No Local Variables are initialized for Method [_GTF]
[ 1.207870] No Arguments are initialized for method [_GTF]
[ 1.207871] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT3._GTF due to previous error (AE_NOT_FOUND) (20200528/psparse-529)
[ 1.207958] ata4.00: ATA-11: KINGSTON SA400S37240G, SBFK71E0, max UDMA/133
[ 1.207960] ata4.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.208153] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT5._GTF.DSSP], AE_NOT_FOUND (20200528/psargs-330)
[ 1.208160] No Local Variables are initialized for Method [_GTF]
[ 1.208161] No Arguments are initialized for method [_GTF]
[ 1.208163] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT5._GTF due to previous error (AE_NOT_FOUND) (20200528/psparse-529)
[ 1.208192] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT1._GTF.DSSP], AE_NOT_FOUND (20200528/psargs-330)
[ 1.208196] No Local Variables are initialized for Method [_GTF]
[ 1.208197] No Arguments are initialized for method [_GTF]
[ 1.208198] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT1._GTF due to previous error (AE_NOT_FOUND) (20200528/psparse-529)
[ 1.208204] ata2.00: ATAPI: ATAPI iHOS104, WL0F, max UDMA/100
[ 1.208227] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT3._GTF.DSSP], AE_NOT_FOUND (20200528/psargs-330)
[ 1.208231] No Local Variables are initialized for Method [_GTF]
[ 1.208231] No Arguments are initialized for method [_GTF]
[ 1.208232] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT3._GTF due to previous error (AE_NOT_FOUND) (20200528/psparse-529)
[ 1.208269] ata4.00: configured for UDMA/133
[ 1.208287] ata6.00: ATA-9: WDC WD3200LPVX-22V0TT0, 01.01A01, max UDMA/133
[ 1.208288] ata6.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.208321] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT2._GTF.DSSP], AE_NOT_FOUND (20200528/psargs-330)
[ 1.208325] No Local Variables are initialized for Method [_GTF]
[ 1.208326] No Arguments are initialized for method [_GTF]
[ 1.208327] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT2._GTF due to previous error (AE_NOT_FOUND) (20200528/psparse-529)
[ 1.208495] ata3.00: ATA-8: WDC WD5000AACS-07G8B0, 05.04C05, max UDMA/133
[ 1.208495] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.208825] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT5._GTF.DSSP], AE_NOT_FOUND (20200528/psargs-330)
[ 1.208835] No Local Variables are initialized for Method [_GTF]
[ 1.208837] No Arguments are initialized for method [_GTF]
[ 1.208839] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT5._GTF due to previous error (AE_NOT_FOUND) (20200528/psparse-529)
[ 1.209009] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT1._GTF.DSSP], AE_NOT_FOUND (20200528/psargs-330)
[ 1.209018] No Local Variables are initialized for Method [_GTF]
[ 1.209019] No Arguments are initialized for method [_GTF]
[ 1.209021] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT1._GTF due to previous error (AE_NOT_FOUND) (20200528/psparse-529)
[ 1.209032] ata2.00: configured for UDMA/100
[ 1.209116] ata6.00: configured for UDMA/133
[ 1.209222] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT2._GTF.DSSP], AE_NOT_FOUND (20200528/psargs-330)
[ 1.209238] No Local Variables are initialized for Method [_GTF]
[ 1.209239] No Arguments are initialized for method [_GTF]
[ 1.209240] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT2._GTF due to previous error (AE_NOT_FOUND) (20200528/psparse-529)
[ 1.209403] ata3.00: configured for UDMA/133
[ 1.216838] scsi 1:0:0:0: CD-ROM ATAPI iHOS104 WL0F PQ: 0 ANSI: 5
[ 1.233907] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[ 1.245788] usb 1-1.5: new full-speed USB device number 3 using ehci-pci
[ 1.247846] nvidia-nvlink: Nvlink Core is being initialized, major device number 238
[ 1.248444] nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[ 1.364198] usb 2-1.5: new high-speed USB device number 3 using ehci-pci
[ 1.364272] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 460.39 Thu Jan 21 21:54:06 UTC 2021
[ 1.387946] sr 1:0:0:0: [sr0] scsi3-mmc drive: 32x/32x cd/rw xa/form2 cdda tray
[ 1.387949] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.401522] usb 3-3: New USB device found, idVendor=2109, idProduct=2812, bcdDevice=90.90
[ 1.401525] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.401527] usb 3-3: Product: USB2.0 Hub
[ 1.401529] usb 3-3: Manufacturer: VIA Labs, Inc.
[ 1.402090] hub 3-3:1.0: USB hub found
[ 1.402443] hub 3-3:1.0: 4 ports detected
[ 1.406044] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.406134] sr 1:0:0:0: Attached scsi generic sg0 type 5
[ 1.406371] scsi 2:0:0:0: Direct-Access ATA WDC WD5000AACS-0 4C05 PQ: 0 ANSI: 5
[ 1.406600] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 1.406743] scsi 3:0:0:0: Direct-Access ATA KINGSTON SA400S3 71E0 PQ: 0 ANSI: 5
[ 1.407016] sd 3:0:0:0: [sdb] 468862128 512-byte logical blocks: (240 GB/224 GiB)
[ 1.407029] sd 3:0:0:0: [sdb] Write Protect is off
[ 1.407031] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.407051] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.407088] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 1.407225] scsi 5:0:0:0: Direct-Access ATA WDC WD3200LPVX-2 1A01 PQ: 0 ANSI: 5
[ 1.407464] sd 5:0:0:0: [sdc] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.407466] sd 5:0:0:0: [sdc] 4096-byte physical blocks
[ 1.407478] sd 5:0:0:0: [sdc] Write Protect is off
[ 1.407479] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.407499] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.407535] sd 5:0:0:0: Attached scsi generic sg3 type 0
[ 1.407621] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 1.407633] sd 2:0:0:0: [sda] Write Protect is off
[ 1.407634] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.407654] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.424226] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 460.39 Thu Jan 21 21:49:04 UTC 2021
[ 1.426661] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[ 1.426663] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 0
[ 1.428645] sdb: sdb1 sdb2
[ 1.429067] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 1.436132] sda: sda1
[ 1.436378] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.441775] tsc: Refined TSC clocksource calibration: 3192.746 MHz
[ 1.441782] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e058540c6e, max_idle_ns: 440795222505 ns
[ 1.441800] clocksource: Switched to clocksource tsc
[ 1.453728] usb 1-1.5: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.10
[ 1.453731] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.453733] usb 1-1.5: Product: USB Receiver
[ 1.453734] usb 1-1.5: Manufacturer: Logitech
[ 1.457495] hid: raw HID events driver (C) Jiri Kosina
[ 1.464769] usbcore: registered new interface driver usbhid
[ 1.464770] usbhid: USB HID core driver
[ 1.466852] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/0003:046D:C52B.0001/input/input2
[ 1.468511] sdc: sdc1
[ 1.468797] sd 5:0:0:0: [sdc] Attached SCSI disk
[ 1.476657] random: fast init done
[ 1.486706] usb 2-1.5: New USB device found, idVendor=1397, idProduct=0509, bcdDevice= 1.12
[ 1.486708] usb 2-1.5: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[ 1.486709] usb 2-1.5: Product: UMC404HD 192k
[ 1.486710] usb 2-1.5: Manufacturer: BEHRINGER
[ 1.525856] usb 4-3: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[ 1.525921] hid-generic 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1a.0-1.5/input0
[ 1.526122] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.1/0003:046D:C52B.0002/input/input3
[ 1.526203] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.1/0003:046D:C52B.0002/input/input4
[ 1.533751] usb 1-1.6: new low-speed USB device number 4 using ehci-pci
[ 1.585939] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.1/0003:046D:C52B.0002/input/input5
[ 1.586035] hid-generic 0003:046D:C52B.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-1.5/input1
[ 1.586192] hid-generic 0003:046D:C52B.0003: hiddev1,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.0-1.5/input2
[ 1.655341] usb 1-1.6: New USB device found, idVendor=046a, idProduct=b102, bcdDevice= 4.03
[ 1.655344] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.655346] usb 1-1.6: Product: USB Wireless Device
[ 1.655348] usb 1-1.6: Manufacturer: CHERRY
[ 1.661787] input: CHERRY USB Wireless Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/0003:046A:B102.0004/input/input7
[ 1.741954] hid-generic 0003:046A:B102.0004: input,hidraw0: USB HID v1.11 Keyboard [CHERRY USB Wireless Device] on usb-0000:00:1a.0-1.6/input0
[ 1.756587] input: CHERRY USB Wireless Device Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.1/0003:046A:B102.0005/input/input8
[ 1.777986] input: CHERRY USB Wireless Device System Control as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.1/0003:046A:B102.0005/input/input9
[ 1.781375] usb 4-3: New USB device found, idVendor=2109, idProduct=0812, bcdDevice=90.91
[ 1.781378] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.781380] usb 4-3: Product: USB3.0 Hub
[ 1.781381] usb 4-3: Manufacturer: VIA Labs, Inc.
[ 1.782785] hub 4-3:1.0: USB hub found
[ 1.782885] hub 4-3:1.0: 4 ports detected
[ 1.837956] input: CHERRY USB Wireless Device Consumer Control as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.1/0003:046A:B102.0005/input/input10
[ 1.838050] hid-generic 0003:046A:B102.0005: input,hidraw3: USB HID v1.11 Mouse [CHERRY USB Wireless Device] on usb-0000:00:1a.0-1.6/input1
[ 1.870698] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.0-1.5/input2
[ 1.905775] usb 3-4: new high-speed USB device number 3 using xhci_hcd
[ 1.991134] input: Logitech Wireless Device PID:402d Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.2/0003:046D:C52B.0003/0003:046D:402D.0006/input/input11
[ 1.991229] input: Logitech Wireless Device PID:402d Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.2/0003:046D:C52B.0003/0003:046D:402D.0006/input/input12
[ 1.991344] hid-generic 0003:046D:402D.0006: input,hidraw2: USB HID v1.11 Keyboard [Logitech Wireless Device PID:402d] on usb-0000:00:1a.0-1.5/input2:1
[ 1.993196] input: Logitech Wireless Device PID:4003 Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.2/0003:046D:C52B.0003/0003:046D:4003.0007/input/input16
[ 1.993302] input: Logitech Wireless Device PID:4003 Consumer Control as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.2/0003:046D:C52B.0003/0003:046D:4003.0007/input/input17
[ 1.993372] input: Logitech Wireless Device PID:4003 System Control as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.2/0003:046D:C52B.0003/0003:046D:4003.0007/input/input18
[ 1.993448] hid-generic 0003:046D:4003.0007: input,hidraw4: USB HID v1.11 Keyboard [Logitech Wireless Device PID:4003] on usb-0000:00:1a.0-1.5/input2:2
[ 2.054791] usb 3-4: New USB device found, idVendor=1058, idProduct=1021, bcdDevice=20.02
[ 2.054794] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.054796] usb 3-4: Product: Ext HDD 1021
[ 2.054797] usb 3-4: Manufacturer: Western Digital
[ 2.054799] usb 3-4: SerialNumber: 574341563538363134333838
[ 2.059588] usb-storage 3-4:1.0: USB Mass Storage device detected
[ 2.059882] scsi host6: usb-storage 3-4:1.0
[ 2.060012] usbcore: registered new interface driver usb-storage
[ 2.061783] usbcore: registered new interface driver uas
[ 2.108938] logitech-hidpp-device 0003:046D:402D.0006: hidraw2: USB HID v1.11 Keyboard [Logitech M560] on usb-0000:00:1a.0-1.5/input2:1
[ 2.145794] usb 3-3.3: new full-speed USB device number 4 using xhci_hcd
[ 2.237037] input: Logitech K270 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.2/0003:046D:C52B.0003/0003:046D:4003.0007/input/input22
[ 2.237127] logitech-hidpp-device 0003:046D:4003.0007: input,hidraw4: USB HID v1.11 Keyboard [Logitech K270] on usb-0000:00:1a.0-1.5/input2:2
[ 2.260522] usb 3-3.3: New USB device found, idVendor=0b05, idProduct=17cb, bcdDevice= 1.12
[ 2.260524] usb 3-3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.260526] usb 3-3.3: Product: BCM20702A0
[ 2.260527] usb 3-3.3: Manufacturer: Broadcom Corp
[ 2.260529] usb 3-3.3: SerialNumber: 5CF3709AF6EC
[ 2.338057] usb 4-3.1: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd
[ 2.360380] usb 4-3.1: New USB device found, idVendor=05e3, idProduct=0743, bcdDevice= 8.21
[ 2.360383] usb 4-3.1: New USB device strings: Mfr=3, Product=4, SerialNumber=5
[ 2.360385] usb 4-3.1: Product: USB Storage
[ 2.360386] usb 4-3.1: Manufacturer: Generic
[ 2.360388] usb 4-3.1: SerialNumber: 000000000821
[ 2.362610] usb-storage 4-3.1:1.0: USB Mass Storage device detected
[ 2.362694] scsi host7: usb-storage 4-3.1:1.0
[ 2.381067] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
[ 2.594045] systemd[1]: Inserted module 'autofs4'
[ 2.640715] systemd[1]: systemd 245.4-4ubuntu3.4 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 2.657882] systemd[1]: Detected architecture x86-64.
[ 2.682570] systemd[1]: Set hostname to <jerom>.
[ 2.804585] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
[ 2.869296] systemd[1]: Created slice system-modprobe.slice.
[ 2.869510] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 2.869683] systemd[1]: Created slice User and Session Slice.
[ 2.869739] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 2.869912] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 2.869954] systemd[1]: Reached target User and Group Name Lookups.
[ 2.869968] systemd[1]: Reached target Remote File Systems.
[ 2.869977] systemd[1]: Reached target Slices.
[ 2.870086] systemd[1]: Listening on Syslog Socket.
[ 2.870167] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 2.870213] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 2.870375] systemd[1]: Listening on Journal Audit Socket.
[ 2.870454] systemd[1]: Listening on Journal Socket (/dev/log).
[ 2.870545] systemd[1]: Listening on Journal Socket.
[ 2.870631] systemd[1]: Listening on udev Control Socket.
[ 2.870702] systemd[1]: Listening on udev Kernel Socket.
[ 2.871500] systemd[1]: Mounting Huge Pages File System...
[ 2.872284] systemd[1]: Mounting POSIX Message Queue File System...
[ 2.873160] systemd[1]: Mounting Kernel Debug File System...
[ 2.874019] systemd[1]: Mounting Kernel Trace File System...
[ 2.875262] systemd[1]: Starting Journal Service...
[ 2.876149] systemd[1]: Starting Set the console keyboard layout...
[ 2.877071] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 2.877105] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
[ 2.877937] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 2.877969] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 2.879368] systemd[1]: Starting Load Kernel Modules...
[ 2.881005] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 2.882496] systemd[1]: Starting udev Coldplug all Devices...
[ 2.885131] systemd[1]: Starting Uncomplicated firewall...
[ 2.898579] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro
[ 2.913086] systemd[1]: Mounted Huge Pages File System.
[ 2.913234] systemd[1]: Mounted POSIX Message Queue File System.
[ 2.913350] systemd[1]: Mounted Kernel Debug File System.
[ 2.913459] systemd[1]: Mounted Kernel Trace File System.
[ 2.917770] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 2.918346] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 2.918800] systemd[1]: Finished Uncomplicated firewall.
[ 2.919631] systemd[1]: Activating swap /swapfile...
[ 2.920691] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 2.921026] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[ 2.923607] systemd[1]: Starting Load/Save Random Seed...
[ 2.926472] systemd[1]: Starting Create System Users...
[ 2.931690] lp: driver loaded but no devices found
[ 2.939646] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k SSFS
[ 2.943608] ppdev: user-space parallel port driver
[ 2.943840] systemd[1]: Activated swap /swapfile.
[ 2.945695] parport_pc 00:05: reported by Plug and Play ACPI
[ 2.945771] parport0: PC-style at 0x378, irq 5 [PCSPP]
[ 2.947090] systemd[1]: Finished Load/Save Random Seed.
[ 2.947389] systemd[1]: Reached target Swap.
[ 2.951537] systemd[1]: Finished Create System Users.
[ 2.952441] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 2.964460] systemd[1]: Finished Create Static Device Nodes in /dev.
[ 2.965382] systemd[1]: Starting udev Kernel Device Manager...
[ 3.034777] systemd[1]: Finished Set the console keyboard layout.
[ 3.034926] systemd[1]: Reached target Local File Systems (Pre).
[ 3.042008] lp0: using parport0 (interrupt-driven).
[ 3.043449] systemd[1]: Finished Load Kernel Modules.
[ 3.044363] systemd[1]: Mounting FUSE Control File System...
[ 3.045150] systemd[1]: Mounting Kernel Configuration File System...
[ 3.048177] systemd[1]: Starting Apply Kernel Variables...
[ 3.049213] systemd[1]: Mounted FUSE Control File System.
[ 3.061521] systemd[1]: Started udev Kernel Device Manager.
[ 3.063053] systemd[1]: Mounted Kernel Configuration File System.
[ 3.077127] systemd[1]: Finished udev Coldplug all Devices.
[ 3.078019] systemd[1]: Starting Show Plymouth Boot Screen...
[ 3.079612] systemd[1]: Finished Apply Kernel Variables.
[ 3.081858] scsi 6:0:0:0: Direct-Access WD Ext HDD 1021 2002 PQ: 0 ANSI: 4
[ 3.082107] sd 6:0:0:0: Attached scsi generic sg4 type 0
[ 3.082305] sd 6:0:0:0: [sdd] 1953519616 512-byte logical blocks: (1.00 TB/932 GiB)
[ 3.082721] sd 6:0:0:0: [sdd] Test WP failed, assume Write Enabled
[ 3.083137] sd 6:0:0:0: [sdd] Asking for cache data failed
[ 3.083140] sd 6:0:0:0: [sdd] Assuming drive cache: write through
[ 3.097576] systemd[1]: plymouth-start.service: Succeeded.
[ 3.097936] systemd[1]: Started Show Plymouth Boot Screen.
[ 3.098055] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch being skipped.
[ 3.098158] systemd[1]: Started Forward Password Requests to Plymouth Directory Watch.
[ 3.098176] systemd[1]: Reached target Local Encrypted Volumes.
[ 3.101296] systemd[1]: Started Journal Service.
[ 3.108501] systemd-journald[291]: Received client request to flush runtime journal.
[ 3.245769] nvidia-uvm: Loaded the UVM driver, major device number 235.
[ 3.386117] EDAC ie31200: No ECC support
[ 3.394539] scsi 7:0:0:0: Direct-Access Generic STORAGE DEVICE 0821 PQ: 0 ANSI: 6
[ 3.394714] sd 7:0:0:0: Attached scsi generic sg5 type 0
[ 3.410597] sd 7:0:0:0: [sde] Attached SCSI removable disk
[ 3.427882] at24 0-0050: supply vcc not found, using dummy regulator
[ 3.428812] at24 0-0050: 256 byte spd EEPROM, read-only
[ 3.428836] at24 0-0051: supply vcc not found, using dummy regulator
[ 3.429366] at24 0-0051: 256 byte spd EEPROM, read-only
[ 3.429384] at24 0-0052: supply vcc not found, using dummy regulator
[ 3.430600] at24 0-0052: 256 byte spd EEPROM, read-only
[ 3.430621] at24 0-0053: supply vcc not found, using dummy regulator
[ 3.431336] at24 0-0053: 256 byte spd EEPROM, read-only
[ 3.437622] asus_wmi: ASUS WMI generic driver loaded
[ 3.444782] asus_wmi: Initialization: 0x0
[ 3.444817] asus_wmi: BIOS WMI version: 0.9
[ 3.444873] asus_wmi: SFUN value: 0x0
[ 3.444875] eeepc-wmi eeepc-wmi: Detected ASUSWMI, use DCTS
[ 3.447050] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input23
[ 3.449580] pstore: Using crash dump compression: deflate
[ 3.449592] pstore: Registered efi as persistent store backend
[ 3.540321] RAPL PMU: API unit is 2^-32 Joules, 2 fixed counters, 163840 ms ovfl timer
[ 3.540323] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 3.540323] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 3.699151] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[ 3.700264] snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002)
[ 3.702760] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 3.702768] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 3.720639] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 3.720641] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 3.720642] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 3.720643] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 3.720644] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x0
[ 3.720644] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 3.720646] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 3.720647] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 3.720648] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 3.723976] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input24
[ 3.724018] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input25
[ 3.724054] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input26
[ 3.724087] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input27
[ 3.724120] input: HDA NVidia HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input28
[ 3.724153] input: HDA NVidia HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input29
[ 3.734072] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input30
[ 3.734115] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input31
[ 3.734152] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input32
[ 3.734188] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input33
[ 3.734224] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input34
[ 3.787820] mc: Linux media interface: v0.10
[ 3.842820] Bluetooth: Core ver 2.22
[ 3.842834] NET: Registered protocol family 31
[ 3.842834] Bluetooth: HCI device and connection manager initialized
[ 3.842838] Bluetooth: HCI socket layer initialized
[ 3.842839] Bluetooth: L2CAP socket layer initialized
[ 3.842842] Bluetooth: SCO socket layer initialized
[ 3.939590] intel_rapl_common: Found RAPL domain package
[ 3.939592] intel_rapl_common: Found RAPL domain core
[ 3.939596] intel_rapl_common: RAPL package-0 domain package locked by BIOS
[ 3.986591] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 3.996444] usbcore: registered new interface driver btusb
[ 4.108141] Bluetooth: hci0: BCM: chip id 63
[ 4.109131] Bluetooth: hci0: BCM: features 0x07
[ 4.125192] Bluetooth: hci0: jerom
[ 4.125195] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000
[ 4.128790] Bluetooth: hci0: BCM: firmware Patch file not found, tried:
[ 4.128794] Bluetooth: hci0: BCM: 'brcm/BCM20702A1-0b05-17cb.hcd'
[ 4.128796] Bluetooth: hci0: BCM: 'brcm/BCM-0b05-17cb.hcd'
[ 5.128979] usbcore: registered new interface driver snd-usb-audio
[ 15.291729] sdd: sdd1
[ 15.293708] sd 6:0:0:0: [sdd] Attached SCSI disk
[ 15.306260] random: crng init done
[ 16.595320] audit: type=1400 audit(1615754777.587:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=782 comm="apparmor_parser"
[ 16.599021] audit: type=1400 audit(1615754777.591:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=781 comm="apparmor_parser"
[ 16.599023] audit: type=1400 audit(1615754777.591:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=781 comm="apparmor_parser"
[ 16.599025] audit: type=1400 audit(1615754777.591:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=781 comm="apparmor_parser"
[ 16.604094] audit: type=1400 audit(1615754777.595:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=783 comm="apparmor_parser"
[ 16.620025] audit: type=1400 audit(1615754777.611:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=785 comm="apparmor_parser"
[ 16.692268] audit: type=1400 audit(1615754777.683:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-soffice" pid=786 comm="apparmor_parser"
[ 16.692271] audit: type=1400 audit(1615754777.683:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-soffice//gpg" pid=786 comm="apparmor_parser"
[ 16.697684] audit: type=1400 audit(1615754777.687:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=788 comm="apparmor_parser"
[ 16.699735] audit: type=1400 audit(1615754777.691:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=789 comm="apparmor_parser"
[ 17.180414] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 17.180416] Bluetooth: BNEP filters: protocol multicast
[ 17.180420] Bluetooth: BNEP socket layer initialized
[ 17.200325] NET: Registered protocol family 38
[ 17.231033] fbcon: Taking over console
[ 17.232376] Console: switching to colour frame buffer device 128x48
[ 17.529764] Generic FE-GE Realtek PHY r8169-300:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-300:00, irq=IGNORE)
[ 17.697868] r8169 0000:03:00.0 enp3s0: Link is Down
[ 18.040577] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000d3fff window]
[ 18.040815] caller os_map_kernel_space.part.0+0x77/0xa0 [nvidia] mapping multiple BARs
[ 20.478861] r8169 0000:03:00.0 enp3s0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 20.478975] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
[ 20.717190] Bluetooth: RFCOMM TTY layer initialized
[ 20.717195] Bluetooth: RFCOMM socket layer initialized
[ 20.717199] Bluetooth: RFCOMM ver 1.11
[ 20.797824] vboxdrv: Found 2 processor cores
[ 20.831420] vboxdrv: TSC mode is Invariant, tentative frequency 3192742163 Hz
[ 20.831421] vboxdrv: Successfully loaded version 6.1.16_Ubuntu (interface 0x00300000)
[ 20.839402] VBoxNetFlt: Successfully started.
[ 20.851611] VBoxNetAdp: Successfully started.
[ 27.678617] logitech-hidpp-device 0003:046D:402D.0006: error in parameter
[ 27.682539] logitech-hidpp-device 0003:046D:402D.0006: error in parameter
[ 27.690557] logitech-hidpp-device 0003:046D:402D.0006: error in parameter
[ 27.706620] logitech-hidpp-device 0003:046D:402D.0006: error in parameter
[ 27.714794] logitech-hidpp-device 0003:046D:402D.0006: HID++ 2.0 device connected.
[ 27.722620] logitech-hidpp-device 0003:046D:402D.0006: error in parameter
[ 27.736544] logitech-hidpp-device 0003:046D:402D.0006: error in parameter
[ 27.752624] logitech-hidpp-device 0003:046D:402D.0006: error in parameter
[ 27.768623] logitech-hidpp-device 0003:046D:402D.0006: error in parameter
[ 27.784622] logitech-hidpp-device 0003:046D:402D.0006: error in parameter
[ 27.798537] logitech-hidpp-device 0003:046D:402D.0006: error in parameter
[ 27.814550] logitech-hidpp-device 0003:046D:402D.0006: error in parameter
[ 27.830619] logitech-hidpp-device 0003:046D:402D.0006: error in parameter
[ 27.844541] logitech-hidpp-device 0003:046D:402D.0006: error in parameter
[ 27.860532] logitech-hidpp-device 0003:046D:402D.0006: error in parameter
[ 27.876530] logitech-hidpp-device 0003:046D:402D.0006: error in parameter
[ 27.892529] logitech-hidpp-device 0003:046D:402D.0006: error in parameter
[ 27.900598] input: Logitech Wireless Mouse M560 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.2/0003:046D:C52B.0003/0003:046D:402D.0006/input/input35
bootctl
Failed to read "/boot/efi/EFI/systemd": Permission non accor>
Failed to open "/boot/efi/loader/loader.conf": Permission no>
System:
Firmware: n/a (n/a)
Secure Boot: disabled
Setup Mode: setup
Current Boot Loader:
Product: n/a
Features: ✗ Boot counting
✗ Menu timeout control
✗ One-shot menu timeout control
✗ Default entry control
✗ One-shot entry control
✗ Support for XBOOTLDR partition
✗ Support for passing random seed to OS
✗ Boot loader sets ESP partition information
ESP: n/a
File: └─n/a
Random Seed:
Passed to OS: no
System Token: not set
Exists: no
Available Boot Loaders on ESP:
ESP: /boot/efi (/dev/disk/by-partuuid/9643d784-dcd>
Boot Loaders Listed in EFI Variables:
Title: ubuntu
ID: 0x0000
Status: active, boot-order
Partition: /dev/disk/by-partuuid/9643d784-dcd1-4c3b-ac22>
File: └─/EFI/ubuntu/shimx64.efi
Title: UEFI OS
ID: 0x0003
Status: active, boot-order
Partition: /dev/disk/by-partuuid/9643d784-dcd1-4c3b-ac22>
File: └─/EFI/BOOT/BOOTX64.EFI
Title: ubuntu
ID: 0x0004
Status: active, boot-order
Partition: /dev/disk/by-partuuid/9643d784-dcd1-4c3b-ac22>
File: └─EFI/Ubuntu/grubx64.efi
Boot Loader Entries:
$BOOT: /boot/efi (/dev/disk/by-partuuid/9643d784-dcd>
et le log de Xorg
[ 17.397] (--) Log file renamed from "/var/log/Xorg.pid-977.log" to "/var/log/Xorg.0.log"
[ 17.399]
X.Org X Server 1.20.9
X Protocol Version 11, Revision 0
[ 17.399] Build Operating System: Linux 4.15.0-130-generic x86_64 Ubuntu
[ 17.399] Current Operating System: Linux jerom 5.8.0-44-generic #50~20.04.1-Ubuntu SMP Wed Feb 10 21:07:30 UTC 2021 x86_64
[ 17.399] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.8.0-44-generic root=UUID=856b3dc0-e042-4095-9fdd-0893bec759d6 ro quiet splash vt.handoff=7
[ 17.399] Build Date: 17 January 2021 09:13:31AM
[ 17.399] xorg-server 2:1.20.9-2ubuntu1.2~20.04.1 (For technical support please see http://www.ubuntu.com/support)
[ 17.399] Current version of pixman: 0.38.4
[ 17.399] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 17.399] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 17.399] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Mar 14 21:46:18 2021
[ 17.404] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 17.413] (==) No Layout section. Using the first Screen section.
[ 17.413] (==) No screen section available. Using defaults.
[ 17.413] (**) |-->Screen "Default Screen Section" (0)
[ 17.413] (**) | |-->Monitor "<default monitor>"
[ 17.416] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 17.416] (==) Automatically adding devices
[ 17.416] (==) Automatically enabling devices
[ 17.416] (==) Automatically adding GPU devices
[ 17.416] (==) Automatically binding GPU devices
[ 17.416] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 17.416] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 17.416] Entry deleted from font path.
[ 17.416] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 17.416] Entry deleted from font path.
[ 17.416] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 17.416] Entry deleted from font path.
[ 17.416] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 17.416] Entry deleted from font path.
[ 17.416] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 17.416] Entry deleted from font path.
[ 17.416] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 17.416] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 17.416] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 17.416] (II) Loader magic: 0x559d31ba8020
[ 17.416] (II) Module ABI versions:
[ 17.416] X.Org ANSI C Emulation: 0.4
[ 17.416] X.Org Video Driver: 24.1
[ 17.416] X.Org XInput driver : 24.1
[ 17.416] X.Org Server Extension : 10.0
[ 17.417] (++) using VT number 1
[ 17.417] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 17.417] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 17.418] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/x86_64-linux-gnu/nvidia/xorg,/usr/lib/xorg/modules"
[ 17.419] (--) PCI:*(1@0:0:0) 10de:1c82:19da:2454 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/131072
[ 17.419] (II) LoadModule: "glx"
[ 17.424] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 17.448] (II) Module glx: vendor="X.Org Foundation"
[ 17.448] compiled for 1.20.9, module version = 1.0.0
[ 17.448] ABI class: X.Org Server Extension, version 10.0
[ 17.448] (II) Applying OutputClass "nvidia" to /dev/dri/card0
[ 17.448] loading driver: nvidia
[ 17.708] (==) Matched nvidia as autoconfigured driver 0
[ 17.708] (==) Matched nouveau as autoconfigured driver 1
[ 17.708] (==) Matched modesetting as autoconfigured driver 2
[ 17.708] (==) Matched fbdev as autoconfigured driver 3
[ 17.708] (==) Matched vesa as autoconfigured driver 4
[ 17.708] (==) Assigned the driver to the xf86ConfigLayout
[ 17.708] (II) LoadModule: "nvidia"
[ 17.708] (II) Loading /usr/lib/x86_64-linux-gnu/nvidia/xorg/nvidia_drv.so
[ 17.717] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 17.717] compiled for 1.6.99.901, module version = 1.0.0
[ 17.717] Module class: X.Org Video Driver
[ 17.718] (II) LoadModule: "nouveau"
[ 17.718] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 17.720] (II) Module nouveau: vendor="X.Org Foundation"
[ 17.721] compiled for 1.20.3, module version = 1.0.16
[ 17.721] Module class: X.Org Video Driver
[ 17.721] ABI class: X.Org Video Driver, version 24.0
[ 17.721] (II) LoadModule: "modesetting"
[ 17.721] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 17.722] (II) Module modesetting: vendor="X.Org Foundation"
[ 17.722] compiled for 1.20.9, module version = 1.20.9
[ 17.722] Module class: X.Org Video Driver
[ 17.722] ABI class: X.Org Video Driver, version 24.1
[ 17.722] (II) LoadModule: "fbdev"
[ 17.722] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 17.723] (II) Module fbdev: vendor="X.Org Foundation"
[ 17.723] compiled for 1.20.1, module version = 0.5.0
[ 17.723] Module class: X.Org Video Driver
[ 17.723] ABI class: X.Org Video Driver, version 24.0
[ 17.723] (II) LoadModule: "vesa"
[ 17.723] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 17.723] (II) Module vesa: vendor="X.Org Foundation"
[ 17.723] compiled for 1.20.4, module version = 2.4.0
[ 17.723] Module class: X.Org Video Driver
[ 17.724] ABI class: X.Org Video Driver, version 24.0
[ 17.724] (II) NVIDIA dlloader X Driver 460.39 Thu Jan 21 21:54:11 UTC 2021
[ 17.724] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 17.724] (II) NOUVEAU driver Date: Mon Jan 28 23:25:58 2019 -0500
[ 17.724] (II) NOUVEAU driver for NVIDIA chipset families :
[ 17.724] RIVA TNT (NV04)
[ 17.724] RIVA TNT2 (NV05)
[ 17.724] GeForce 256 (NV10)
[ 17.724] GeForce 2 (NV11, NV15)
[ 17.724] GeForce 4MX (NV17, NV18)
[ 17.724] GeForce 3 (NV20)
[ 17.724] GeForce 4Ti (NV25, NV28)
[ 17.724] GeForce FX (NV3x)
[ 17.724] GeForce 6 (NV4x)
[ 17.724] GeForce 7 (G7x)
[ 17.724] GeForce 8 (G8x)
[ 17.724] GeForce 9 (G9x)
[ 17.724] GeForce GTX 2xx/3xx (GT2xx)
[ 17.724] GeForce GTX 4xx/5xx (GFxxx)
[ 17.724] GeForce GTX 6xx/7xx (GKxxx)
[ 17.724] GeForce GTX 9xx (GMxxx)
[ 17.724] GeForce GTX 10xx (GPxxx)
[ 17.725] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 17.725] (II) FBDEV: driver for framebuffer: fbdev
[ 17.725] (II) VESA: driver for VESA chipsets: vesa
[ 17.727] (II) Loading sub module "fb"
[ 17.727] (II) LoadModule: "fb"
[ 17.727] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 17.728] (II) Module fb: vendor="X.Org Foundation"
[ 17.728] compiled for 1.20.9, module version = 1.0.0
[ 17.728] ABI class: X.Org ANSI C Emulation, version 0.4
[ 17.728] (II) Loading sub module "wfb"
[ 17.728] (II) LoadModule: "wfb"
[ 17.729] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 17.730] (II) Module wfb: vendor="X.Org Foundation"
[ 17.730] compiled for 1.20.9, module version = 1.0.0
[ 17.730] ABI class: X.Org ANSI C Emulation, version 0.4
[ 17.730] (II) Loading sub module "ramdac"
[ 17.730] (II) LoadModule: "ramdac"
[ 17.730] (II) Module "ramdac" already built-in
[ 17.732] (WW) Falling back to old probe method for modesetting
[ 17.732] (WW) Falling back to old probe method for fbdev
[ 17.732] (II) Loading sub module "fbdevhw"
[ 17.732] (II) LoadModule: "fbdevhw"
[ 17.732] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 17.733] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 17.733] compiled for 1.20.9, module version = 0.0.2
[ 17.733] ABI class: X.Org Video Driver, version 24.1
[ 17.733] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 17.733] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 17.733] (==) NVIDIA(0): RGB weight 888
[ 17.733] (==) NVIDIA(0): Default visual is TrueColor
[ 17.733] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 17.734] (II) Applying OutputClass "nvidia" options to /dev/dri/card0
[ 17.734] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[ 17.734] (**) NVIDIA(0): Enabling 2D acceleration
[ 17.734] (II) Loading sub module "glxserver_nvidia"
[ 17.734] (II) LoadModule: "glxserver_nvidia"
[ 17.734] (II) Loading /usr/lib/x86_64-linux-gnu/nvidia/xorg/libglxserver_nvidia.so
[ 17.826] (II) Module glxserver_nvidia: vendor="NVIDIA Corporation"
[ 17.826] compiled for 1.6.99.901, module version = 1.0.0
[ 17.826] Module class: X.Org Server Extension
[ 17.826] (II) NVIDIA GLX Module 460.39 Thu Jan 21 21:51:40 UTC 2021
[ 17.829] (II) NVIDIA: The X server supports PRIME Render Offload.
[ 18.556] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0
[ 18.556] (--) NVIDIA(0): DFP-0
[ 18.556] (--) NVIDIA(0): DFP-1 (boot)
[ 18.556] (--) NVIDIA(0): DFP-2
[ 18.556] (--) NVIDIA(0): DFP-3
[ 18.557] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 1050 Ti (GP107-A) at PCI:1:0:0 (GPU-0)
[ 18.557] (--) NVIDIA(0): Memory: 4194304 kBytes
[ 18.557] (--) NVIDIA(0): VideoBIOS: 86.07.22.00.53
[ 18.557] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 18.557] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 18.557] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[ 18.557] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[ 18.557] (--) NVIDIA(GPU-0):
[ 18.586] (--) NVIDIA(GPU-0): Samsung SMB2430H (DFP-1): connected
[ 18.586] (--) NVIDIA(GPU-0): Samsung SMB2430H (DFP-1): Internal TMDS
[ 18.586] (--) NVIDIA(GPU-0): Samsung SMB2430H (DFP-1): 600.0 MHz maximum pixel clock
[ 18.586] (--) NVIDIA(GPU-0):
[ 18.586] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 18.586] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[ 18.586] (--) NVIDIA(GPU-0): DFP-2: 1440.0 MHz maximum pixel clock
[ 18.586] (--) NVIDIA(GPU-0):
[ 18.586] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 18.586] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[ 18.586] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[ 18.586] (--) NVIDIA(GPU-0):
[ 18.592] (==) NVIDIA(0):
[ 18.592] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 18.592] (==) NVIDIA(0): will be used as the requested mode.
[ 18.592] (==) NVIDIA(0):
[ 18.592] (II) NVIDIA(0): Validated MetaModes:
[ 18.592] (II) NVIDIA(0): "DFP-1:nvidia-auto-select"
[ 18.592] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[ 18.598] (--) NVIDIA(0): DPI set to (304, 304); computed from "UseEdidDpi" X config
[ 18.598] (--) NVIDIA(0): option
[ 18.598] (II) UnloadModule: "nouveau"
[ 18.598] (II) Unloading nouveau
[ 18.598] (II) UnloadModule: "modesetting"
[ 18.598] (II) Unloading modesetting
[ 18.598] (II) UnloadModule: "fbdev"
[ 18.598] (II) Unloading fbdev
[ 18.598] (II) UnloadSubModule: "fbdevhw"
[ 18.598] (II) Unloading fbdevhw
[ 18.598] (II) UnloadModule: "vesa"
[ 18.598] (II) Unloading vesa
[ 18.599] (II) NVIDIA: Using 24576.00 MB of virtual memory for indirect memory
[ 18.599] (II) NVIDIA: access.
[ 18.621] (II) NVIDIA(0): Setting mode "DFP-1:nvidia-auto-select"
[ 18.673] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 18.673] (==) NVIDIA(0): Backing store enabled
[ 18.673] (==) NVIDIA(0): Silken mouse enabled
[ 18.675] (==) NVIDIA(0): DPMS enabled
[ 18.675] (II) Loading sub module "dri2"
[ 18.676] (II) LoadModule: "dri2"
[ 18.676] (II) Module "dri2" already built-in
[ 18.676] (II) NVIDIA(0): [DRI2] Setup complete
[ 18.676] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 18.676] (II) Initializing extension Generic Event Extension
[ 18.676] (II) Initializing extension SHAPE
[ 18.676] (II) Initializing extension MIT-SHM
[ 18.677] (II) Initializing extension XInputExtension
[ 18.677] (II) Initializing extension XTEST
[ 18.677] (II) Initializing extension BIG-REQUESTS
[ 18.678] (II) Initializing extension SYNC
[ 18.678] (II) Initializing extension XKEYBOARD
[ 18.678] (II) Initializing extension XC-MISC
[ 18.678] (II) Initializing extension SECURITY
[ 18.678] (II) Initializing extension XFIXES
[ 18.678] (II) Initializing extension RENDER
[ 18.678] (II) Initializing extension RANDR
[ 18.679] (II) Initializing extension COMPOSITE
[ 18.679] (II) Initializing extension DAMAGE
[ 18.679] (II) Initializing extension MIT-SCREEN-SAVER
[ 18.679] (II) Initializing extension DOUBLE-BUFFER
[ 18.679] (II) Initializing extension RECORD
[ 18.679] (II) Initializing extension DPMS
[ 18.679] (II) Initializing extension Present
[ 18.680] (II) Initializing extension DRI3
[ 18.680] (II) Initializing extension X-Resource
[ 18.680] (II) Initializing extension XVideo
[ 18.680] (II) Initializing extension XVideo-MotionCompensation
[ 18.680] (II) Initializing extension SELinux
[ 18.680] (II) SELinux: Disabled on system
[ 18.680] (II) Initializing extension GLX
[ 18.680] (II) Initializing extension GLX
[ 18.680] (II) Indirect GLX disabled.
[ 18.680] (II) GLX: Another vendor is already registered for screen 0
[ 18.680] (II) Initializing extension XFree86-VidModeExtension
[ 18.680] (II) Initializing extension XFree86-DGA
[ 18.680] (II) Initializing extension XFree86-DRI
[ 18.680] (II) Initializing extension DRI2
[ 18.681] (II) Initializing extension NV-GLX
[ 18.681] (II) Initializing extension NV-CONTROL
[ 18.681] (II) Initializing extension XINERAMA
[ 18.762] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 18.762] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 18.762] (II) LoadModule: "libinput"
[ 18.762] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 18.767] (II) Module libinput: vendor="X.Org Foundation"
[ 18.768] compiled for 1.20.4, module version = 0.29.0
[ 18.768] Module class: X.Org XInput Driver
[ 18.768] ABI class: X.Org XInput driver, version 24.1
[ 18.768] (II) Using input driver 'libinput' for 'Power Button'
[ 18.768] (**) Power Button: always reports core events
[ 18.768] (**) Option "Device" "/dev/input/event1"
[ 18.768] (**) Option "_source" "server/udev"
[ 18.773] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 18.773] (II) event1 - Power Button: device is a keyboard
[ 18.774] (II) event1 - Power Button: device removed
[ 18.797] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 18.797] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 18.797] (**) Option "xkb_model" "pc105"
[ 18.797] (**) Option "xkb_layout" "fr"
[ 18.797] (**) Option "xkb_variant" "oss_nodeadkeys"
[ 18.819] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 18.819] (II) event1 - Power Button: device is a keyboard
[ 18.820] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 18.820] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 18.820] (II) Using input driver 'libinput' for 'Power Button'
[ 18.820] (**) Power Button: always reports core events
[ 18.820] (**) Option "Device" "/dev/input/event0"
[ 18.820] (**) Option "_source" "server/udev"
[ 18.821] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 18.821] (II) event0 - Power Button: device is a keyboard
[ 18.821] (II) event0 - Power Button: device removed
[ 18.833] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 18.833] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 18.833] (**) Option "xkb_model" "pc105"
[ 18.833] (**) Option "xkb_layout" "fr"
[ 18.833] (**) Option "xkb_variant" "oss_nodeadkeys"
[ 18.835] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 18.835] (II) event0 - Power Button: device is a keyboard
[ 18.836] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event8)
[ 18.836] (II) No input driver specified, ignoring this device.
[ 18.836] (II) This device may have been added with another device file.
[ 18.837] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event9)
[ 18.837] (II) No input driver specified, ignoring this device.
[ 18.837] (II) This device may have been added with another device file.
[ 18.837] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event10)
[ 18.837] (II) No input driver specified, ignoring this device.
[ 18.837] (II) This device may have been added with another device file.
[ 18.838] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event11)
[ 18.838] (II) No input driver specified, ignoring this device.
[ 18.838] (II) This device may have been added with another device file.
[ 18.838] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=10 (/dev/input/event12)
[ 18.838] (II) No input driver specified, ignoring this device.
[ 18.838] (II) This device may have been added with another device file.
[ 18.839] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=11 (/dev/input/event13)
[ 18.839] (II) No input driver specified, ignoring this device.
[ 18.839] (II) This device may have been added with another device file.
[ 18.840] (II) config/udev: Adding input device Logitech K270 (/dev/input/event5)
[ 18.840] (**) Logitech K270: Applying InputClass "libinput keyboard catchall"
[ 18.840] (II) Using input driver 'libinput' for 'Logitech K270'
[ 18.840] (**) Logitech K270: always reports core events
[ 18.840] (**) Option "Device" "/dev/input/event5"
[ 18.840] (**) Option "_source" "server/udev"
[ 18.842] (II) event5 - Logitech K270: is tagged by udev as: Keyboard
[ 18.842] (II) event5 - Logitech K270: device is a keyboard
[ 18.842] (II) event5 - Logitech K270: device removed
[ 18.849] (II) libinput: Logitech K270: needs a virtual subdevice
[ 18.849] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.2/0003:046D:C52B.0003/0003:046D:4003.0007/input/input22/event5"
[ 18.849] (II) XINPUT: Adding extended input device "Logitech K270" (type: MOUSE, id 8)
[ 18.850] (**) Option "AccelerationScheme" "none"
[ 18.850] (**) Logitech K270: (accel) selected scheme none/0
[ 18.850] (**) Logitech K270: (accel) acceleration factor: 2.000
[ 18.850] (**) Logitech K270: (accel) acceleration threshold: 4
[ 18.853] (II) event5 - Logitech K270: is tagged by udev as: Keyboard
[ 18.853] (II) event5 - Logitech K270: device is a keyboard
[ 18.854] (II) config/udev: Adding input device CHERRY USB Wireless Device (/dev/input/event2)
[ 18.854] (**) CHERRY USB Wireless Device: Applying InputClass "libinput keyboard catchall"
[ 18.854] (II) Using input driver 'libinput' for 'CHERRY USB Wireless Device'
[ 18.854] (**) CHERRY USB Wireless Device: always reports core events
[ 18.854] (**) Option "Device" "/dev/input/event2"
[ 18.854] (**) Option "_source" "server/udev"
[ 18.857] (II) event2 - CHERRY USB Wireless Device: is tagged by udev as: Keyboard
[ 18.857] (II) event2 - CHERRY USB Wireless Device: device is a keyboard
[ 18.857] (II) event2 - CHERRY USB Wireless Device: device removed
[ 18.873] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/0003:046A:B102.0004/input/input7/event2"
[ 18.873] (II) XINPUT: Adding extended input device "CHERRY USB Wireless Device" (type: KEYBOARD, id 9)
[ 18.873] (**) Option "xkb_model" "pc105"
[ 18.873] (**) Option "xkb_layout" "fr"
[ 18.873] (**) Option "xkb_variant" "oss_nodeadkeys"
[ 18.876] (II) event2 - CHERRY USB Wireless Device: is tagged by udev as: Keyboard
[ 18.876] (II) event2 - CHERRY USB Wireless Device: device is a keyboard
[ 18.878] (II) config/udev: Adding input device CHERRY USB Wireless Device Consumer Control (/dev/input/event6)
[ 18.878] (**) CHERRY USB Wireless Device Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 18.878] (II) Using input driver 'libinput' for 'CHERRY USB Wireless Device Consumer Control'
[ 18.878] (**) CHERRY USB Wireless Device Consumer Control: always reports core events
[ 18.878] (**) Option "Device" "/dev/input/event6"
[ 18.878] (**) Option "_source" "server/udev"
[ 18.880] (II) event6 - CHERRY USB Wireless Device Consumer Control: is tagged by udev as: Keyboard
[ 18.880] (II) event6 - CHERRY USB Wireless Device Consumer Control: device is a keyboard
[ 18.880] (II) event6 - CHERRY USB Wireless Device Consumer Control: device removed
[ 18.897] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.1/0003:046A:B102.0005/input/input10/event6"
[ 18.897] (II) XINPUT: Adding extended input device "CHERRY USB Wireless Device Consumer Control" (type: KEYBOARD, id 10)
[ 18.897] (**) Option "xkb_model" "pc105"
[ 18.897] (**) Option "xkb_layout" "fr"
[ 18.897] (**) Option "xkb_variant" "oss_nodeadkeys"
[ 18.900] (II) event6 - CHERRY USB Wireless Device Consumer Control: is tagged by udev as: Keyboard
[ 18.900] (II) event6 - CHERRY USB Wireless Device Consumer Control: device is a keyboard
[ 18.902] (II) config/udev: Adding input device CHERRY USB Wireless Device Mouse (/dev/input/event3)
[ 18.902] (**) CHERRY USB Wireless Device Mouse: Applying InputClass "libinput pointer catchall"
[ 18.902] (II) Using input driver 'libinput' for 'CHERRY USB Wireless Device Mouse'
[ 18.902] (**) CHERRY USB Wireless Device Mouse: always reports core events
[ 18.902] (**) Option "Device" "/dev/input/event3"
[ 18.902] (**) Option "_source" "server/udev"
[ 18.904] (II) event3 - CHERRY USB Wireless Device Mouse: is tagged by udev as: Mouse
[ 18.904] (II) event3 - CHERRY USB Wireless Device Mouse: device is a pointer
[ 18.904] (II) event3 - CHERRY USB Wireless Device Mouse: device removed
[ 18.937] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.1/0003:046A:B102.0005/input/input8/event3"
[ 18.937] (II) XINPUT: Adding extended input device "CHERRY USB Wireless Device Mouse" (type: MOUSE, id 11)
[ 18.937] (**) Option "AccelerationScheme" "none"
[ 18.938] (**) CHERRY USB Wireless Device Mouse: (accel) selected scheme none/0
[ 18.938] (**) CHERRY USB Wireless Device Mouse: (accel) acceleration factor: 2.000
[ 18.938] (**) CHERRY USB Wireless Device Mouse: (accel) acceleration threshold: 4
[ 18.940] (II) event3 - CHERRY USB Wireless Device Mouse: is tagged by udev as: Mouse
[ 18.941] (II) event3 - CHERRY USB Wireless Device Mouse: device is a pointer
[ 18.942] (II) config/udev: Adding input device CHERRY USB Wireless Device Mouse (/dev/input/mouse0)
[ 18.942] (II) No input driver specified, ignoring this device.
[ 18.942] (II) This device may have been added with another device file.
[ 18.943] (II) config/udev: Adding input device CHERRY USB Wireless Device System Control (/dev/input/event4)
[ 18.943] (**) CHERRY USB Wireless Device System Control: Applying InputClass "libinput keyboard catchall"
[ 18.943] (II) Using input driver 'libinput' for 'CHERRY USB Wireless Device System Control'
[ 18.943] (**) CHERRY USB Wireless Device System Control: always reports core events
[ 18.943] (**) Option "Device" "/dev/input/event4"
[ 18.943] (**) Option "_source" "server/udev"
[ 18.944] (II) event4 - CHERRY USB Wireless Device System Control: is tagged by udev as: Keyboard
[ 18.945] (II) event4 - CHERRY USB Wireless Device System Control: device is a keyboard
[ 18.945] (II) event4 - CHERRY USB Wireless Device System Control: device removed
[ 18.965] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.1/0003:046A:B102.0005/input/input9/event4"
[ 18.965] (II) XINPUT: Adding extended input device "CHERRY USB Wireless Device System Control" (type: KEYBOARD, id 12)
[ 18.965] (**) Option "xkb_model" "pc105"
[ 18.965] (**) Option "xkb_layout" "fr"
[ 18.965] (**) Option "xkb_variant" "oss_nodeadkeys"
[ 18.968] (II) event4 - CHERRY USB Wireless Device System Control: is tagged by udev as: Keyboard
[ 18.969] (II) event4 - CHERRY USB Wireless Device System Control: device is a keyboard
[ 18.969] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event14)
[ 18.969] (II) No input driver specified, ignoring this device.
[ 18.969] (II) This device may have been added with another device file.
[ 18.970] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event15)
[ 18.970] (II) No input driver specified, ignoring this device.
[ 18.970] (II) This device may have been added with another device file.
[ 18.971] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event16)
[ 18.971] (II) No input driver specified, ignoring this device.
[ 18.971] (II) This device may have been added with another device file.
[ 18.971] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event17)
[ 18.971] (II) No input driver specified, ignoring this device.
[ 18.971] (II) This device may have been added with another device file.
[ 18.972] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event18)
[ 18.972] (II) No input driver specified, ignoring this device.
[ 18.972] (II) This device may have been added with another device file.
[ 18.973] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event7)
[ 18.973] (**) Eee PC WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[ 18.973] (II) Using input driver 'libinput' for 'Eee PC WMI hotkeys'
[ 18.973] (**) Eee PC WMI hotkeys: always reports core events
[ 18.973] (**) Option "Device" "/dev/input/event7"
[ 18.973] (**) Option "_source" "server/udev"
[ 18.974] (II) event7 - Eee PC WMI hotkeys: is tagged by udev as: Keyboard
[ 18.974] (II) event7 - Eee PC WMI hotkeys: device is a keyboard
[ 18.974] (II) event7 - Eee PC WMI hotkeys: device removed
[ 18.989] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input23/event7"
[ 18.989] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 13)
[ 18.989] (**) Option "xkb_model" "pc105"
[ 18.989] (**) Option "xkb_layout" "fr"
[ 18.989] (**) Option "xkb_variant" "oss_nodeadkeys"
[ 18.991] (II) event7 - Eee PC WMI hotkeys: is tagged by udev as: Keyboard
[ 18.991] (II) event7 - Eee PC WMI hotkeys: device is a keyboard
[ 19.002] (**) Logitech K270: Applying InputClass "libinput keyboard catchall"
[ 19.002] (II) Using input driver 'libinput' for 'Logitech K270'
[ 19.002] (**) Logitech K270: always reports core events
[ 19.002] (**) Option "Device" "/dev/input/event5"
[ 19.002] (**) Option "_source" "_driver/libinput"
[ 19.002] (II) libinput: Logitech K270: is a virtual subdevice
[ 19.002] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.2/0003:046D:C52B.0003/0003:046D:4003.0007/input/input22/event5"
[ 19.002] (II) XINPUT: Adding extended input device "Logitech K270" (type: KEYBOARD, id 14)
[ 19.002] (**) Option "xkb_model" "pc105"
[ 19.002] (**) Option "xkb_layout" "fr"
[ 19.002] (**) Option "xkb_variant" "oss_nodeadkeys"
[ 19.007] (EE) Failed to open authorization file "/var/run/sddm/{a1e401ee-9337-463f-9489-dcb7dcf49a52}": No such file or directory
[ 21.145] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 21.145] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[ 21.145] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[ 21.145] (--) NVIDIA(GPU-0):
[ 21.179] (--) NVIDIA(GPU-0): Samsung SMB2430H (DFP-1): connected
[ 21.179] (--) NVIDIA(GPU-0): Samsung SMB2430H (DFP-1): Internal TMDS
[ 21.179] (--) NVIDIA(GPU-0): Samsung SMB2430H (DFP-1): 600.0 MHz maximum pixel clock
[ 21.179] (--) NVIDIA(GPU-0):
[ 21.179] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 21.179] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[ 21.179] (--) NVIDIA(GPU-0): DFP-2: 1440.0 MHz maximum pixel clock
[ 21.179] (--) NVIDIA(GPU-0):
[ 21.179] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 21.179] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[ 21.179] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[ 21.179] (--) NVIDIA(GPU-0):
[ 21.503] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 21.503] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[ 21.503] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[ 21.503] (--) NVIDIA(GPU-0):
[ 21.537] (--) NVIDIA(GPU-0): Samsung SMB2430H (DFP-1): connected
[ 21.537] (--) NVIDIA(GPU-0): Samsung SMB2430H (DFP-1): Internal TMDS
[ 21.537] (--) NVIDIA(GPU-0): Samsung SMB2430H (DFP-1): 600.0 MHz maximum pixel clock
[ 21.537] (--) NVIDIA(GPU-0):
[ 21.537] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 21.537] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[ 21.537] (--) NVIDIA(GPU-0): DFP-2: 1440.0 MHz maximum pixel clock
[ 21.537] (--) NVIDIA(GPU-0):
[ 21.538] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 21.538] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[ 21.538] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[ 21.538] (--) NVIDIA(GPU-0):
[ 27.909] (II) config/udev: Adding input device Logitech Wireless Mouse M560 (/dev/input/mouse1)
[ 27.909] (II) No input driver specified, ignoring this device.
[ 27.909] (II) This device may have been added with another device file.
[ 27.953] (II) config/udev: Adding input device Logitech Wireless Mouse M560 (/dev/input/event19)
[ 27.953] (**) Logitech Wireless Mouse M560: Applying InputClass "libinput pointer catchall"
[ 27.953] (II) Using input driver 'libinput' for 'Logitech Wireless Mouse M560'
[ 27.953] (**) Logitech Wireless Mouse M560: always reports core events
[ 27.953] (**) Option "Device" "/dev/input/event19"
[ 27.953] (**) Option "_source" "server/udev"
[ 27.955] (II) event19 - Logitech Wireless Mouse M560: is tagged by udev as: Mouse
[ 27.955] (II) event19 - Logitech Wireless Mouse M560: device is a pointer
[ 27.956] (II) event19 - Logitech Wireless Mouse M560: device removed
[ 27.985] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.2/0003:046D:C52B.0003/0003:046D:402D.0006/input/input35/event19"
[ 27.985] (II) XINPUT: Adding extended input device "Logitech Wireless Mouse M560" (type: MOUSE, id 15)
[ 27.986] (**) Option "AccelerationScheme" "none"
[ 27.986] (**) Logitech Wireless Mouse M560: (accel) selected scheme none/0
[ 27.986] (**) Logitech Wireless Mouse M560: (accel) acceleration factor: 2.000
[ 27.986] (**) Logitech Wireless Mouse M560: (accel) acceleration threshold: 4
[ 27.988] (II) event19 - Logitech Wireless Mouse M560: is tagged by udev as: Mouse
[ 27.988] (II) event19 - Logitech Wireless Mouse M560: device is a pointer
En espérant que ça aide!
Merci beaucoup!
