Ce site est optimisé pour être consulté depuis un navigateur moderne dans lequel JavaScript est activé.

Webcam Philips SPC 200NC + règle UDEV

Isaric

Que faire ?

Michel Xhaard a écritBon il y a un vrai probleme de configuration de ta distro. pour laquelle je
suis incompétant Il semble que tu ais deux noyaux installés et que le driver
s'installe dans celui qui n'est pas actif. Quand a celui qui est actif il
dispose d'une version de spca5xx obsoléte et pas une originale spca5xx-core.c
ne fait pas parti de mes packages, sans doute une version crée a partir de
mes sources pour des besoins internes a Ubuntu. Le mieux est d'interroger les
gens d'Ubuntu. Je n'ai pas le temps et les moyens de corriger toutes les
distro de la planète 🙂
il faut que cette version:

>> Feb 10 13:51:30 localhost kernel: [4302305.588000]
>> drivers/usb/media/spca5xx/spca5xx-core.c: spca5xx driver 00.57.02
>> registered Feb 10 13:51:30 localhost usb.agent[12721]: spca5xx: loaded
>> successfully

disparaisse au profit de la version 00.57.09

Quelques notes en vrac :

webcam Philips SPC 200NC
Cette webcam fonctionne avec un chips vimicro
Il faut impérativement installer les headersLa seule dépendance est la libsdl http://www.libsdl.org mais elle doit être
J'ai d'installé dans synaptic
libsdl1.2debian Simple DirectMedia Layer
et
libsdl1.2debian-oss Simple DirectMedia Layer (with X11 and OSS options)

Je rajoute
libsdl1.2-dev pour compiler spcaview
J'ai déjà
build-essential
linux-headers-2.6.12-10 Header files related to Linux kernel version 2.6.12
linux-headers-2.6.12-10-386 Linux kernel headers 2.6.12 on 386
et
camstream ???

Il faut installer spcaview (spca5xx-20060202.tar.gz)
l'extraire pour obtenir /spca5xx-20060202

Il s'agit des sources de spca5xx soit tu disposes des sources du kernel
installées sur ta machine et tu peux donc compiler spca5xx , soit elle n'y
sont pas dans ce cas ce fichier ne te sert a rien.
Pour compiler des sources il y a des tas de howto sur internet le plus simple:
tar -xvzf spca5xx-20060202.tar.gz
cd spca5xx-20060202
make
sudo make install
Pour vérifier que tout est en ordre, tape la commande suivante :
isaric@acer:~$ sudo modinfo spca5xx
Le system doit te renvoyer toutes sortes d'information conçernnant spca5xx .

Maintenant il faut installer spcaview disponible sur mon site
http://mxhaard.free.fr/spca50x/Download/oldrelease/
spcaview-20051127.tar.gz
tar -xvzf spcaview-20051127.tar.gz
cd spcaview-20051127
make
sudo make install

spcaview est maintenant installé (avec beaucoup de warning sans doute du a ta
version de gcc) il n'y a plus qu'à tester.
connecte ta webcam
dans /var/log/messages tu dois trouver une information sur ta webcam ?

Si vous rencontrer un problème:
Il faut tester avec spcaview et cette commande
spcaview -d /dev/video0 -f jpg -s 352x288
Comme tu as une carte TV
spcaview -d /dev/video1 -f jpg -s 352x288

Si cela fonctionne
spcaview -d /dev/video0 -f yuv -s 352x288
Si cela fonctionne la webcam devrait fonctionner avec toutes les applications
v4l1
Si cela ne fonctionne pas:
charger le module en mode debug:
isaric@acer:~$ modprobe spca5xx debug=5
plugger la webcam
lancer
spcaview -d /dev/video0 -f jpg -s 352x288
stopper spcaview

J'ai supprimer deux fichiers
Inférieur 2.6.12-10 pour linux-restricted-modules-2.6.12-??6-386 et l'autre je ne sais plus ?
Ils étaient dans installés (locaux ou obsolètes)

Choup's

On avance !! :lol::lol:
J'ai réussi à faire fonctionner la webcam avec spcaview et camorama !!! 😃:D

Merci Isaric pour ton post précédent contenant la réponse de Michel Xhaard, ainsi que les "Quelques notes en vrac " (c'est ce qui m'a mis sur la piste). 😉

Il semble effectivement qu'une ancienne version de spca5xx soit installée de base avec la distribution Ubuntu (00.57.02 au lieu de 00.57.09).

Comment faire :
- Créer les périphériques

sudo mknod /dev/video0 c 81 0
sudo mknod /dev/video1 c 81 1
sudo chmod a+rw /dev/video0
sudo ln -s /dev/video0 /dev/video

- installer via Synaptic : linux-headers-2.6.12-10-686-smp (ou du moins la version relative à ce que donne la commande

uname -r

- télécharger la dernière version de spca5xx sur le site http://mxhaard.free.fr/download.html
- décompresser l'archive téléchargée (tar -xvzf spca5xx-20060202.tar.gz)
- cd spca5xx-20060202
- export CC=gcc-3.4 (voir Remarque 1 à la fin)
- make
- sudo make install

Et la subtilité :
- dans le répertoire /lib/modules/2.6.12-10-686-smp/kernel/drivers/usb/media/spca5xx/
- sauvegarder spca5xx.ko (sudo mv spca5xx.ko spca5xx.ko.sav) (--> c le driver en question)
- copier le module fraichement compilé dans ce répertoire (sudo cp xxx/spca5xx-20060202/spca5xx.ko .)
- plugger la camera
- et la normallement, la loupiotte bleu s'allume

Pour tester
- installer camorama via Synaptic
- lancer camorama 😛(cela fonctionne sans paramètre)

Petit pb quand même (et oui, ca peut pas être parfait, tout de même) :
- il faut relancer plusieurs fois camorama ou spcaview pour avoir une image (sinon écran noir)
- l'image est à l'envers avec spcaview, et à 90° avec camorama
- via le menu "Système/Préférences/Sélecteur de systèmes multimedia", jamais d'image (écran noir tout le temps) :/
Si qqun a une idée...

Remarque 1 :
Pour utiliser le bon gcc (compile le programme), il faut savoir avec quel GCC le noyau à étè compilé.
Pour le savoir tapez :

cat /proc/version
Linux version 2.6.12-10-686 (buildd@terranova) (gcc version 3.4.5 20050809 (prerelease) (Ubuntu 3.4.4-6ubuntu8)) #1 Thu Dec 22 11:55:07 UTC 2005

Il y a écrit *gcc version* suivi du numéro. Seul les deux premiers chiffres nous interessent ici 3.4 .
Faite preceder de export CC=gcc-3.4 (si vous avez un noyau compilé avec gcc-3.4) ou export CC=gcc-4.0 (si c’est avec gcc-4.0)la commande *make*.

export CC=gcc-3.4
make

Il se peut que sous Breezy la commande export ne fonctionne pas, il suffit de faire :

CC=gcc-3.4 sudo make

Remarque 2 :
Anbreizh : c'est peut-être une piste pour mettre à jour EasyCam2 ?!

Anbreizh

Je ne pas m'occuper de ca pour le moment (Je ne suis plus dispo pour 1 semaine la )
Par contre j'invite toute personne ayant quelque connaisance en python et en glade (vraiment minime ) de le modifier a l'aide des sources disponible ici et de le redistributer (Pas de probleme tout est en GPL 😃 ) : http://blognux.free.fr/EasyCam2(sources)/

Isaric

Choup's a écritOn avance !! :lol::lol:

Super 😃

Choup's a écritEt la subtilité :
- dans le répertoire /lib/modules/2.6.12-10-686-smp/kernel/drivers/usb/media/spca5xx/
- sauvegarder spca5xx.ko (sudo mv spca5xx.ko spca5xx.ko.sav) (--> c le driver en question)
- copier le module fraichement compilé dans ce répertoire (sudo cp xxx/spca5xx-20060202/spca5xx.ko .)

Je bloque ici :

isaric@acer:~/spca5xx-20060202$ cd /lib/modules/2.6.12-10-386/kernel/drivers/usb/media
isaric@acer:/lib/modules/2.6.12-10-386/kernel/drivers/usb/media$ sudo mv spca5xx.ko spca5xx.ko.sav
isaric@acer:/lib/modules/2.6.12-10-386/kernel/drivers/usb/media$ sudo cp xxx/spca5xx-20060202/spca5xx.ko
cp: fichier cible manquant
Pour en savoir davantage, faites: « cp --help ».
isaric@acer:/lib/modules/2.6.12-10-386/kernel/drivers/usb/media$

dans
/lib/modules/2.6.12-10-386/kernel/drivers/usb/media
je n'ai plus 1 fichier spca5xx.ko.sav (résultat de sudo mv spca5xx.ko spca5xx.ko.sav) je crois !

je vais essayer :

cp /lib/modules/2.6.12-10-386/kernel/drivers/usb/media/spca5xx.ko.sav /home/isaric/spca5xx-20060202/spca5xx.ko

remarque :
isaric@acer:~$ cat /proc/version
Linux version 2.6.12-10-386 (buildd@rothera) (gcc version 3.4.5 20050809 (prerelease) (Ubuntu 3.4.4-6ubuntu8)) #1 Mon Jan 16 17:18:08 UTC 2006
isaric@acer:~$

Toujours dans camorama
"could not connect to video device (/dev/video0). Please check connection."
Et un ecran noir avec

isaric@acer:~$ spcaview -d /dev/video0 -f jpg -s 352x288
 Spcaview version: 1.1.4 date: 27:11:2005 (C) mxhaard@magic.fr
 size width: 352 height: 288
Initializing SDL.
SDL initialized.
bpp 3 format 21
Using video device /dev/video0.
Initializing v4l.
**************** PROBING CAMERA *********************
Camera found: BT878 video (Leadtek WinFast 20
Bridge found: Television
Unable to find a StreamId !!
StreamId: -1 Unknow Camera
Camera unable to stream in JPEG mode switch to YUV420P
Available Resolutions width 640  heigth 480 native
Available Resolutions width 352  heigth 288 native *
Available Resolutions width 320  heigth 240 native
Available Resolutions width 176  heigth 144 native
Available Resolutions width 160  heigth 120 native
*****************************************************
 grabbing method default MMAP asked
VIDIOCGMBUF size 17039360  frames 8  offets[0]=0 offsets[1]=2129920
VIDIOCGPICT
brightnes=32768 hue=32768 color=32768 contrast=32768 whiteness=0
depth=24 palette=4
Couldnt get videopict params with VIDIOCSPICT
: Invalid argument

Et une erreur pour

isaric@acer:~$ spcaview -d /dev/video1 -f jpg -s 352x288
 Spcaview version: 1.1.4 date: 27:11:2005 (C) mxhaard@magic.fr
 size width: 352 height: 288
Initializing SDL.
SDL initialized.
bpp 3 format 21
Using video device /dev/video1.
Initializing v4l.
ERROR opening V4L interface
: No such file or directory
isaric@acer:~$

Choup's a écritPetit pb quand même (et oui, ca peut pas être parfait, tout de même) :
- il faut relancer plusieurs fois camorama ou spcaview pour avoir une image (sinon écran noir)

Cela me fait penser à un problème d'UBUNTU (il y a aussi les problèmes de montage de disquette ou de clé USB) [Fonctionne mais pas pratique]Reconnaissance du scanner EPSON
Alors que sur la partition WINDOWS cela fonctionne et je croise les doigts pour que cela soit amélioré dans le version suivante.

Choup's

Isaric a écritJe bloque ici :

isaric@acer:~/spca5xx-20060202$ cd /lib/modules/2.6.12-10-386/kernel/drivers/usb/media
isaric@acer:/lib/modules/2.6.12-10-386/kernel/drivers/usb/media$ sudo mv spca5xx.ko spca5xx.ko.sav
isaric@acer:/lib/modules/2.6.12-10-386/kernel/drivers/usb/media$ sudo cp xxx/spca5xx-20060202/spca5xx.ko
cp: fichier cible manquant
Pour en savoir davantage, faites: « cp --help ».
isaric@acer:/lib/modules/2.6.12-10-386/kernel/drivers/usb/media$

dans
/lib/modules/2.6.12-10-386/kernel/drivers/usb/media
je n'ai plus 1 fichier spca5xx.ko.sav (résultat de sudo mv spca5xx.ko spca5xx.ko.sav) je crois !

je vais essayer :

cp /lib/modules/2.6.12-10-386/kernel/drivers/usb/media/spca5xx.ko.sav /home/isaric/spca5xx-20060202/spca5xx.ko

En fait, il faut plutôt faire :

sudo cp ~/spca5xx-20060202/spca5xx.ko /lib/modules/2.6.12-10-386/kernel/drivers/usb/media/

Si ~/spca5xx-20060202 est bien le répertoire dans lequel tu as compilé spca5xx.
Le but est de copier le nouveau module fraichement compilé dans le répertoire où Ubuntu va le chercher.
Je ne sais pas si c'est ce que tu as fait au final.

Isaric

Mon seul résultat, c'est que je ne peux même plus scanner ! :mad:

Ce qui est bizarre pendant cet essai, j'ai eu Camorama qui a démarré (en noir). Il n'a pas été bloqué par /dev/video0.

J'ai alors redémarré mon micro et maintenant je me retrouve dans la configuration de départ. le scanner remarche et Camorama indique l'erreur /dev/video0...

Choup's

Euh... Là, je ne comprend pas tout. :/
Je ne vois pas bien le rapport entre le scanner et spca5xx.

Bon, voyons, que nous reste-t-il comme piste :
- est-ce que lorsque tu lance camorama et que tu as un écran noir, la loupiotte bleu de ta webcam s'allume ?
- as-tu bien utilisé la bonne version de gcc ?
- quand tu charge le module, as-tu bien la version 00.57.09 ? Pour vérifier :
Tu débranches la webcam

sudo rmmod spca5xx

Tu branches la webcam

cat /var/log/messages

Isaric

Merci Choup's de te préocuper de mon problème !

Je vois que je ne suis pas le seul :/ avec un problème de /dev/video0 avec le post #900 de
Centralisation Probleme Webcam+EasyCam

Choup's a écritEuh... Là, je ne comprend pas tout. :/
Je ne vois pas bien le rapport entre le scanner et spca5xx.

Je ne suis pas en mesure de donner des explications techniques. 🙁
J'utilise Xsane pour le scanner. Il utilise ma carte vidéo il me semble car il peut faire des captures d'écran sur bt878
(j'utilise Xdtv et Fricorcer aussi et je me demande si depuis ces manipulations fricorder marche encore !)

Remarque pour avoir la TV j'ai du faire des trucs comme cela :

card=34 Leatdtek Winfast 2000

Vérifier la présence des modules bttv (modules carte tuner):
dmesg
dmesg | grep bttv

Ta carte télé est supportée sans problème sous linux. Et c'est grace aux modules bttv et bt878. Donc il ne faut pas les décharger.
Créer ce fichier :
isaric@acer:~$ sudo gedit /etc/modprobe.d/bttv
et mettre 
options bttv tuner=3 card=34

J'ai cela :

isaric@acer:~$ sudo rmmod spca5xx
Password:
isaric@acer:~$ cat /var/proc/messages
cat: /var/proc/messages: Aucun fichier ou répertoire de ce type
isaric@acer:~$

Ensuite, j'ai utilisé spca5xx-20060202.tar.gz et spcaview-20051127.tar.gz
Je ne sais pas ou lire la version "00.57.09", mais je pense que Michel Xhaard avait bien vérifié cela. C'est surement comme cela qu'il a découvert 2 versions sur UBUNTU, je crois ?!

pour GCC extrait post #44

isaric@acer:~$ cat /proc/version
Linux version 2.6.12-10-386 (buildd@rothera) (gcc version 3.4.5 20050809 (prerelease) (Ubuntu 3.4.4-6ubuntu8)) #1 Mon Jan 16 17:18:08 UTC 2006
isaric@acer:~$

Je précise que ma webcam marche sur Windows.
J'ai déjà vu la led bleu sur UBUNTU, lors d'un branchement ou au demarrage de camorama ???, mais je n'ai pas noté les momments exactes :rolleyes:

Je ne sais pas quoi ajouter ?

Choup's

Excuse-moi, je me suis trompé dans la commande. 😃
Tu peux réessayer la manip avec :

cat /var/log/messages

(j'ai modifié le post précédent)

Avant toute chose (et dans le doute), tu peux recréer les périphériques :

sudo mknod /dev/video0 c 81 0
sudo mknod /dev/video1 c 81 1
sudo chmod a+rw /dev/video0
sudo ln -s /dev/video0 /dev/video

Je ne sais pas trop comment sont gérés les périphériques, car ils semblent apparaitre et disparaitre inopinément...:/ Bizarre bizarre...

Isaric a écritEnsuite, j'ai utilisé spca5xx-20060202.tar.gz et spcaview-20051127.tar.gz
Je ne sais pas ou lire la version "00.57.09", mais je pense que Michel Xhaard avait bien vérifié cela. C'est surement comme cela qu'il a découvert 2 versions sur UBUNTU, je crois ?!

Effectivement, mais c'est pour vérifier que la manip de copie du module remplace bien la 00.57.02 par 00.57.09.
Pour rappel de cette manip :

Choup's a écritEn fait, il faut plutôt faire :
sudo cp ~/spca5xx-20060202/spca5xx.ko /lib/modules/2.6.12-10-386/kernel/drivers/usb/media/
Si ~/spca5xx-20060202 est bien le répertoire dans lequel tu as compilé spca5xx.
Le but est de copier le nouveau module fraichement compilé dans le répertoire où Ubuntu va le chercher.
Je ne sais pas si c'est ce que tu as fait au final.

Isaric a écritJe précise que ma webcam marche sur Windows.

Moi aussi, mais ce n'est pas lié ! 🙂

Isaric

isaric@acer:~$ sudo mknod /dev/video0 c 81 0
Password:
mknod: `/dev/video0': Le fichier existe.
isaric@acer:~$ sudo mknod /dev/video1 c 81 1
isaric@acer:~$ sudo chmod a+rw /dev/video0
isaric@acer:~$ sudo ln -s /dev/video0 /dev/video
isaric@acer:~$ sudo cp ~/spca5xx-20060202/spca5xx.ko /lib/modules/2.6.12-10-386/kernel/drivers/usb/media/
isaric@acer:~$

isaric@acer:~$ sudo rmmod spca5xx
Password:
isaric@acer:~$ cat /var/log/messages
...
(translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:27:22 localhost kernel: [4294799.913000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:27:22 localhost kernel: [4294800.136000] atkbd.c: Unknown key released  (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:27:22 localhost kernel: [4294800.136000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:27:24 localhost kernel: [4294802.111000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:27:24 localhost kernel: [4294802.111000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:27:25 localhost kernel: [4294803.139000] atkbd.c: Unknown key released  (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:27:25 localhost kernel: [4294803.139000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:27:25 localhost kernel: [4294803.375000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:27:25 localhost kernel: [4294803.375000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:27:26 localhost kernel: [4294804.148000] atkbd.c: Unknown key released  (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:27:26 localhost kernel: [4294804.148000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:27:26 localhost kernel: [4294804.684000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:27:26 localhost kernel: [4294804.684000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:27:26 localhost kernel: [4294804.790000] atkbd.c: Unknown key released  (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:27:26 localhost kernel: [4294804.790000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:27:27 localhost kernel: [4294804.874000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:27:27 localhost kernel: [4294804.874000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:27:27 localhost kernel: [4294805.009000] atkbd.c: Unknown key released  (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:27:27 localhost kernel: [4294805.009000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:27:45 localhost kernel: [4294823.266000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:27:45 localhost kernel: [4294823.266000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:27:45 localhost kernel: [4294823.431000] atkbd.c: Unknown key released  (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:27:45 localhost kernel: [4294823.431000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:27:45 localhost kernel: [4294823.544000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:27:45 localhost kernel: [4294823.544000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:27:45 localhost kernel: [4294823.739000] atkbd.c: Unknown key released  (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:27:45 localhost kernel: [4294823.739000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:27:47 localhost kernel: [4294824.931000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:27:47 localhost kernel: [4294824.931000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:27:47 localhost kernel: [4294825.155000] atkbd.c: Unknown key released  (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:27:47 localhost kernel: [4294825.155000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:27:48 localhost kernel: [4294826.798000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:27:48 localhost kernel: [4294826.798000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:27:49 localhost kernel: [4294827.604000] atkbd.c: Unknown key released  (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:27:49 localhost kernel: [4294827.604000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:27:50 localhost kernel: [4294828.019000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:27:50 localhost kernel: [4294828.019000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:27:51 localhost kernel: [4294828.856000] atkbd.c: Unknown key released  (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:27:51 localhost kernel: [4294828.856000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:27:51 localhost kernel: [4294829.331000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:27:51 localhost kernel: [4294829.331000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:27:51 localhost kernel: [4294829.526000] atkbd.c: Unknown key released  (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:27:51 localhost kernel: [4294829.526000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:27:52 localhost kernel: [4294830.625000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:27:52 localhost kernel: [4294830.625000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:27:53 localhost kernel: [4294830.819000] atkbd.c: Unknown key released  (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:27:53 localhost kernel: [4294830.819000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:29:44 localhost kernel: [4294942.244000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:29:44 localhost kernel: [4294942.244000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:29:44 localhost kernel: [4294942.408000] atkbd.c: Unknown key released  (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:29:44 localhost kernel: [4294942.408000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:29:44 localhost kernel: [4294942.670000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:29:44 localhost kernel: [4294942.670000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:29:44 localhost kernel: [4294942.805000] atkbd.c: Unknown key released  (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:29:44 localhost kernel: [4294942.805000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:30:22 localhost kernel: [4294980.226000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:30:22 localhost kernel: [4294980.226000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:30:22 localhost kernel: [4294980.811000] atkbd.c: Unknown key released  (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:30:22 localhost kernel: [4294980.811000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:30:43 localhost kernel: [4295001.383000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:30:43 localhost kernel: [4295001.383000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:30:43 localhost kernel: [4295001.813000] atkbd.c: Unknown key released  (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:30:43 localhost kernel: [4295001.813000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:30:46 localhost kernel: [4295004.689000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:30:46 localhost kernel: [4295004.689000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:30:47 localhost kernel: [4295005.681000] atkbd.c: Unknown key released  (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:30:47 localhost kernel: [4295005.681000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:30:48 localhost kernel: [4295005.947000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:30:48 localhost kernel: [4295005.947000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:30:48 localhost kernel: [4295006.053000] atkbd.c: Unknown key released  (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:30:48 localhost kernel: [4295006.053000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:31:07 localhost kernel: [4295025.325000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:31:07 localhost kernel: [4295025.325000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:31:07 localhost kernel: [4295025.490000] atkbd.c: Unknown key released  (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:31:07 localhost kernel: [4295025.490000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:31:32 localhost gconfd (root-11507): démarrage (version 2.12.0), pid 1 1507 utilisateur « root »
Feb 15 08:31:33 localhost gconfd (root-11507): Adresse « xml:readonly:/etc/gconf /gconf.xml.mandatory » résolue vers une source de configuration en lecture seule  à la position 0
Feb 15 08:31:33 localhost gconfd (root-11507): Adresse « xml:readonly:/usr/share /gconf/local.mandatory » résolue vers une source de configuration en lecture seu le à la position 1
Feb 15 08:31:33 localhost gconfd (root-11507): Adresse « xml:readwrite:/root/.gc onf » résolue vers une source de configuration accessible en écriture à la posit ion 2
Feb 15 08:31:33 localhost gconfd (root-11507): Adresse « xml:readonly:/etc/gconf /gconf.xml.defaults » résolue vers une source de configuration en lecture seule à la position 3
Feb 15 08:31:33 localhost gconfd (root-11507): Adresse « xml:readonly:/usr/share /gconf/local.defaults » résolue vers une source de configuration en lecture seul e à la position 4
Feb 15 08:31:33 localhost gconfd (root-11507): Adresse « xml:readonly:/usr/share /gconf/cdd.defaults » résolue vers une source de configuration en lecture seule à la position 5
Feb 15 08:31:33 localhost gconfd (root-11507): Adresse « xml:readonly:/usr/share /gconf/debian.defaults » résolue vers une source de configuration en lecture seu le à la position 6
Feb 15 08:31:33 localhost gconfd (root-11507): Adresse « xml:readonly:/var/lib/g conf/defaults » résolue vers une source de configuration en lecture seule à la p osition 7
Feb 15 08:32:36 localhost gconfd (root-11507): Sortie
Feb 15 08:33:12 localhost exiting on signal 15
Feb 15 08:33:13 localhost syslogd 1.4.1#17ubuntu3: restart.
Feb 15 08:33:16 localhost gconfd (root-29662): démarrage (version 2.12.0), pid 2 9662 utilisateur « root »
Feb 15 08:33:16 localhost gconfd (root-29662): Adresse « xml:readonly:/etc/gconf /gconf.xml.mandatory » résolue vers une source de configuration en lecture seule  à la position 0
Feb 15 08:33:16 localhost gconfd (root-29662): Adresse « xml:readonly:/usr/share /gconf/local.mandatory » résolue vers une source de configuration en lecture seu le à la position 1
Feb 15 08:33:16 localhost gconfd (root-29662): Adresse « xml:readwrite:/root/.gc onf » résolue vers une source de configuration accessible en écriture à la posit ion 2
Feb 15 08:33:16 localhost gconfd (root-29662): Adresse « xml:readonly:/etc/gconf /gconf.xml.defaults » résolue vers une source de configuration en lecture seule à la position 3
Feb 15 08:33:16 localhost gconfd (root-29662): Adresse « xml:readonly:/usr/share /gconf/local.defaults » résolue vers une source de configuration en lecture seul e à la position 4
Feb 15 08:33:16 localhost gconfd (root-29662): Adresse « xml:readonly:/usr/share /gconf/cdd.defaults » résolue vers une source de configuration en lecture seule à la position 5
Feb 15 08:33:16 localhost gconfd (root-29662): Adresse « xml:readonly:/usr/share /gconf/debian.defaults » résolue vers une source de configuration en lecture seu le à la position 6
Feb 15 08:33:16 localhost gconfd (root-29662): Adresse « xml:readonly:/var/lib/g conf/defaults » résolue vers une source de configuration en lecture seule à la p osition 7
Feb 15 08:33:17 localhost gconfd (root-29662): Sortie
Feb 15 08:33:46 localhost gconfd (isaric-10158): SIGHUP reçu, rechargement de to utes les bases de données
Feb 15 08:33:46 localhost gconfd (isaric-10158): Adresse « xml:readonly:/etc/gco nf/gconf.xml.mandatory » résolue vers une source de configuration en lecture seu le à la position 0
Feb 15 08:33:46 localhost gconfd (isaric-10158): Adresse « xml:readonly:/usr/sha re/gconf/local.mandatory » résolue vers une source de configuration en lecture s eule à la position 1
Feb 15 08:33:46 localhost gconfd (isaric-10158): Adresse « xml:readwrite:/home/i saric/.gconf » résolue vers une source de configuration accessible en écriture à  la position 2
Feb 15 08:33:46 localhost gconfd (isaric-10158): Adresse « xml:readonly:/etc/gco nf/gconf.xml.defaults » résolue vers une source de configuration en lecture seul e à la position 3
Feb 15 08:33:46 localhost gconfd (isaric-10158): Adresse « xml:readonly:/usr/sha re/gconf/local.defaults » résolue vers une source de configuration en lecture se ule à la position 4
Feb 15 08:33:46 localhost gconfd (isaric-10158): Adresse « xml:readonly:/usr/sha re/gconf/cdd.defaults » résolue vers une source de configuration en lecture seul e à la position 5
Feb 15 08:33:46 localhost gconfd (isaric-10158): Adresse « xml:readonly:/usr/sha re/gconf/debian.defaults » résolue vers une source de configuration en lecture s eule à la position 6
Feb 15 08:33:46 localhost gconfd (isaric-10158): Adresse « xml:readonly:/var/lib /gconf/defaults » résolue vers une source de configuration en lecture seule à la  position 7
Feb 15 08:37:27 localhost kernel: [4295405.271000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:37:27 localhost kernel: [4295405.271000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:37:27 localhost kernel: [4295405.406000] atkbd.c: Unknown key released  (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:37:27 localhost kernel: [4295405.406000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:37:28 localhost kernel: [4295406.216000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:37:28 localhost kernel: [4295406.216000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:37:28 localhost kernel: [4295406.322000] atkbd.c: Unknown key released  (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:37:28 localhost kernel: [4295406.322000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:37:28 localhost kernel: [4295406.405000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:37:28 localhost kernel: [4295406.405000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:37:28 localhost kernel: [4295406.511000] atkbd.c: Unknown key released  (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:37:28 localhost kernel: [4295406.511000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:37:30 localhost kernel: [4295408.548000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:37:30 localhost kernel: [4295408.548000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:37:31 localhost kernel: [4295409.164000] atkbd.c: Unknown key released  (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:37:31 localhost kernel: [4295409.164000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:37:31 localhost kernel: [4295409.760000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:37:31 localhost kernel: [4295409.760000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:37:32 localhost kernel: [4295409.984000] atkbd.c: Unknown key released  (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:37:32 localhost kernel: [4295409.984000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:37:32 localhost kernel: [4295410.127000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:37:32 localhost kernel: [4295410.127000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:37:32 localhost kernel: [4295410.292000] atkbd.c: Unknown key released  (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:37:32 localhost kernel: [4295410.292000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:37:33 localhost kernel: [4295411.809000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:37:33 localhost kernel: [4295411.809000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:37:34 localhost kernel: [4295412.003000] atkbd.c: Unknown key released  (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:37:34 localhost kernel: [4295412.003000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:37:36 localhost kernel: [4295414.497000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:37:36 localhost kernel: [4295414.497000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:37:36 localhost kernel: [4295414.868000] atkbd.c: Unknown key released  (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:37:36 localhost kernel: [4295414.868000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:37:49 localhost kernel: [4295427.766000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:37:49 localhost kernel: [4295427.766000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:37:52 localhost kernel: [4295429.953000] atkbd.c: Unknown key released  (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:37:52 localhost kernel: [4295429.953000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:37:52 localhost kernel: [4295430.189000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:37:52 localhost kernel: [4295430.189000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:37:52 localhost kernel: [4295430.324000] atkbd.c: Unknown key released  (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:37:52 localhost kernel: [4295430.324000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:37:52 localhost kernel: [4295430.408000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:37:52 localhost kernel: [4295430.408000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:37:52 localhost kernel: [4295430.513000] atkbd.c: Unknown key released  (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:37:52 localhost kernel: [4295430.513000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:37:55 localhost kernel: [4295433.681000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:37:55 localhost kernel: [4295433.681000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:37:55 localhost kernel: [4295433.816000] atkbd.c: Unknown key released  (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:37:55 localhost kernel: [4295433.816000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:38:00 localhost kernel: [4295438.225000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:38:00 localhost kernel: [4295438.225000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:38:00 localhost kernel: [4295438.419000] atkbd.c: Unknown key released  (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:38:00 localhost kernel: [4295438.419000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:38:14 localhost kernel: [4295452.624000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:38:14 localhost kernel: [4295452.624000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:38:15 localhost kernel: [4295452.904000] atkbd.c: Unknown key released  (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:38:15 localhost kernel: [4295452.904000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:38:15 localhost kernel: [4295452.958000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:38:15 localhost kernel: [4295452.958000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:38:15 localhost kernel: [4295453.093000] atkbd.c: Unknown key released  (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:38:15 localhost kernel: [4295453.093000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:38:15 localhost kernel: [4295453.148000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:38:15 localhost kernel: [4295453.148000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:38:15 localhost kernel: [4295453.283000] atkbd.c: Unknown key released  (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:38:15 localhost kernel: [4295453.283000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:38:15 localhost kernel: [4295453.337000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:38:15 localhost kernel: [4295453.337000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:38:15 localhost kernel: [4295453.443000] atkbd.c: Unknown key released  (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:38:15 localhost kernel: [4295453.443000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:38:15 localhost kernel: [4295453.852000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:38:15 localhost kernel: [4295453.852000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:38:16 localhost kernel: [4295453.988000] atkbd.c: Unknown key released  (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:38:16 localhost kernel: [4295453.988000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:39:40 localhost gconfd (root-29779): démarrage (version 2.12.0), pid 2 9779 utilisateur « root »
Feb 15 08:39:40 localhost gconfd (root-29779): Adresse « xml:readonly:/etc/gconf /gconf.xml.mandatory » résolue vers une source de configuration en lecture seule  à la position 0
Feb 15 08:39:40 localhost gconfd (root-29779): Adresse « xml:readonly:/usr/share /gconf/local.mandatory » résolue vers une source de configuration en lecture seu le à la position 1
Feb 15 08:39:40 localhost gconfd (root-29779): Adresse « xml:readwrite:/root/.gc onf » résolue vers une source de configuration accessible en écriture à la posit ion 2
Feb 15 08:39:40 localhost gconfd (root-29779): Adresse « xml:readonly:/etc/gconf /gconf.xml.defaults » résolue vers une source de configuration en lecture seule à la position 3
Feb 15 08:39:40 localhost gconfd (root-29779): Adresse « xml:readonly:/usr/share /gconf/local.defaults » résolue vers une source de configuration en lecture seul e à la position 4
Feb 15 08:39:40 localhost gconfd (root-29779): Adresse « xml:readonly:/usr/share /gconf/cdd.defaults » résolue vers une source de configuration en lecture seule à la position 5
Feb 15 08:39:40 localhost gconfd (root-29779): Adresse « xml:readonly:/usr/share /gconf/debian.defaults » résolue vers une source de configuration en lecture seu le à la position 6
Feb 15 08:39:40 localhost gconfd (root-29779): Adresse « xml:readonly:/var/lib/g conf/defaults » résolue vers une source de configuration en lecture seule à la p osition 7
Feb 15 08:40:10 localhost gconfd (root-29779): Le serveur GConf n'est pas en cou rs d'utilisation, arrêt.
Feb 15 08:40:10 localhost gconfd (root-29779): Sortie
Feb 15 08:40:40 localhost kernel: [4295598.727000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:40:40 localhost kernel: [4295598.727000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:40:40 localhost kernel: [4295598.832000] atkbd.c: Unknown key released  (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:40:40 localhost kernel: [4295598.832000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:42:16 localhost kernel: [4295693.931000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:42:16 localhost kernel: [4295693.931000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:42:16 localhost kernel: [4295694.067000] atkbd.c: Unknown key released  (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:42:16 localhost kernel: [4295694.067000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:45:14 localhost kernel: [4295872.816000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:45:14 localhost kernel: [4295872.816000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:45:15 localhost kernel: [4295873.558000] atkbd.c: Unknown key released  (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:45:15 localhost kernel: [4295873.558000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:45:16 localhost kernel: [4295874.094000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:45:16 localhost kernel: [4295874.094000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:45:16 localhost kernel: [4295874.259000] atkbd.c: Unknown key released  (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:45:16 localhost kernel: [4295874.259000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:45:16 localhost kernel: [4295874.491000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:45:16 localhost kernel: [4295874.491000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:45:17 localhost kernel: [4295875.264000] atkbd.c: Unknown key released  (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:45:17 localhost kernel: [4295875.264000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:45:17 localhost kernel: [4295875.530000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:45:17 localhost kernel: [4295875.530000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:45:17 localhost kernel: [4295875.665000] atkbd.c: Unknown key released  (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:45:17 localhost kernel: [4295875.665000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:45:17 localhost kernel: [4295875.719000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:45:17 localhost kernel: [4295875.719000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:45:17 localhost kernel: [4295875.825000] atkbd.c: Unknown key released  (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:45:17 localhost kernel: [4295875.825000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:45:19 localhost kernel: [4295877.108000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:45:19 localhost kernel: [4295877.108000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:45:20 localhost kernel: [4295877.976000] atkbd.c: Unknown key released  (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:45:20 localhost kernel: [4295877.976000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:45:20 localhost kernel: [4295878.241000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:45:20 localhost kernel: [4295878.241000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:45:20 localhost kernel: [4295878.406000] atkbd.c: Unknown key released  (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:45:20 localhost kernel: [4295878.406000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:45:20 localhost kernel: [4295878.667000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:45:20 localhost kernel: [4295878.667000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:45:20 localhost kernel: [4295878.743000] atkbd.c: Unknown key released  (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 08:45:20 localhost kernel: [4295878.743000] atkbd.c: Use 'setkeycodes e02 a <keycode>' to make it known.
Feb 15 08:45:50 localhost kernel: [4295908.678000] usb 2-2: USB disconnect, addr ess 3
Feb 15 08:45:52 localhost kernel: [4295910.620000] usbcore: deregistering driver  spca5xx
Feb 15 08:45:52 localhost kernel: [4295910.626000] drivers/usb/media/spca5xx/spc a5xx-core.c: driver spca5xx deregistered
Feb 15 08:45:57 localhost kernel: [4295915.105000] usb 2-2: new full speed USB d evice using ohci_hcd and address 5
Feb 15 08:45:57 localhost kernel: [4295915.398000] usbcore: registered new drive r spca5xx
Feb 15 08:45:57 localhost kernel: [4295915.398000] drivers/usb/media/spca5xx/spc a5xx-core.c: spca5xx driver 00.57.02 registered
Feb 15 08:45:57 localhost usb.agent[29969]:      spca5xx: loaded successfully
isaric@acer:~$

Voilà toujours au même point !

Choup's

Bon, je vois...😉

Tu peux essayer ceci et ca devrait aller mieux :

cd /lib/modules/2.6.12-10-386/kernel/drivers/usb/media/spca5xx
sudo mv spca5xx.ko spca5xx.ko.sav
sudo cp ~/spca5xx-20060202/spca5xx.ko /lib/modules/2.6.12-10-386/kernel/drivers/usb/media/spca5xx/

Et pis si ca ne marche toujours pas, peux-tu me poster le résultat de la manip avec le "cat /var/log/messages" et pis le résultat de la commande :

ls -l /lib/modules/2.6.12-10-386/kernel/drivers/usb/media/spca5xx/

Isaric

a <keycode>' to make it known.
Feb 15 09:18:05 localhost kernel: [4297843.989000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 09:18:05 localhost kernel: [4297843.989000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
Feb 15 09:18:10 localhost kernel: [4297848.874000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 09:18:10 localhost kernel: [4297848.874000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
Feb 15 09:18:10 localhost kernel: [4297849.098000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
Feb 15 09:18:10 localhost kernel: [4297849.098000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
Feb 15 09:20:26 localhost gconfd (isaric-30526): Sortie
Feb 15 09:20:26 localhost shutdown[9514]: shutting down for system halt
Feb 15 09:20:32 localhost kernel: [4297991.065000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
Feb 15 09:20:32 localhost kernel: [4297991.065000] apm: disabled on user request.
Feb 15 09:20:36 localhost kernel: Kernel logging (proc) stopped.
Feb 15 09:20:36 localhost kernel: Kernel log daemon terminating.
Feb 15 09:20:36 localhost exiting on signal 15
Feb 15 13:42:36 localhost syslogd 1.4.1#17ubuntu3: restart.
Feb 15 13:42:36 localhost kernel: Inspecting /boot/System.map-2.6.12-10-386
Feb 15 13:42:36 localhost kernel: Loaded 29010 symbols from /boot/System.map-2.6.12-10-386.
Feb 15 13:42:36 localhost kernel: Symbols match kernel version 2.6.12.
Feb 15 13:42:36 localhost kernel: No module symbols loaded - kernel modules not enabled.
Feb 15 13:42:36 localhost kernel: LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
Feb 15 13:42:36 localhost kernel: [4294671.289000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
Feb 15 13:42:36 localhost kernel: [4294671.290000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
Feb 15 13:42:36 localhost kernel: [4294671.290000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
Feb 15 13:42:36 localhost kernel: [4294671.292000] Linux Plug and Play Support v0.97 (c) Adam Belay
Feb 15 13:42:36 localhost kernel: [4294671.292000] pnp: PnP ACPI init
Feb 15 13:42:36 localhost kernel: [4294671.295000] pnp: PnP ACPI: found 11 devices
Feb 15 13:42:36 localhost kernel: [4294671.295000] PnPBIOS: Disabled by ACPI PNPFeb 15 13:42:36 localhost kernel: [4294671.295000] PCI: Using ACPI for IRQ routing
Feb 15 13:42:36 localhost kernel: [4294671.295000] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
Feb 15 13:42:36 localhost kernel: [4294671.301000] audit: initializing netlink socket (disabled)
Feb 15 13:42:36 localhost kernel: [4294671.301000] audit: initialized
Feb 15 13:42:36 localhost kernel: [4294671.301000] highmem bounce pool size: 64 pages
Feb 15 13:42:36 localhost kernel: [4294671.301000] VFS: Disk quotas dquot_6.5.1
Feb 15 13:42:36 localhost kernel: [4294671.301000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Feb 15 13:42:36 localhost kernel: [4294671.301000] devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
Feb 15 13:42:36 localhost kernel: [4294671.301000] devfs: boot_options: 0x0
Feb 15 13:42:36 localhost kernel: [4294671.301000] Initializing Cryptographic API
Feb 15 13:42:36 localhost kernel: [4294671.302000] isapnp: Scanning for PnP cards...
Feb 15 13:42:36 localhost kernel: [4294671.655000] isapnp: No Plug & Play device found
Feb 15 13:42:36 localhost kernel: [4294671.667000] PNP: PS/2 controller doesn't have AUX irq; using default 0xc
Feb 15 13:42:36 localhost kernel: [4294671.667000] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 112
Feb 15 13:42:36 localhost kernel: [4294671.669000] i8042.c: Warning: Keylock active.
Feb 15 13:42:36 localhost kernel: [4294672.697000] serio: i8042 AUX port at 0x60,0x64 irq 12
Feb 15 13:42:36 localhost kernel: [4294672.698000] serio: i8042 KBD port at 0x60,0x64 irq 1
Feb 15 13:42:36 localhost kernel: [4294672.698000] Serial: 8250/16550 driver $Revision: 1.90 $ 54 ports, IRQ sharing enabled
Feb 15 13:42:36 localhost kernel: [4294672.698000] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Feb 15 13:42:36 localhost kernel: [4294672.698000] ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Feb 15 13:42:36 localhost kernel: [4294672.700000] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Feb 15 13:42:36 localhost kernel: [4294672.700000] ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Feb 15 13:42:36 localhost kernel: [4294672.700000] io scheduler noop registered
Feb 15 13:42:36 localhost kernel: [4294672.700000] io scheduler anticipatory registered
Feb 15 13:42:36 localhost kernel: [4294672.700000] io scheduler deadline registered
Feb 15 13:42:36 localhost kernel: [4294672.700000] io scheduler cfq registered
Feb 15 13:42:36 localhost kernel: [4294672.700000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
Feb 15 13:42:36 localhost kernel: [4294672.701000] EISA: Probing bus 0 at eisa.0Feb 15 13:42:36 localhost kernel: [4294672.701000] Cannot allocate resource for EISA slot 1
Feb 15 13:42:36 localhost kernel: [4294672.701000] Cannot allocate resource for EISA slot 4
Feb 15 13:42:36 localhost kernel: [4294672.701000] EISA: Detected 0 cards.
Feb 15 13:42:36 localhost kernel: [4294672.701000] NET: Registered protocol family 2
Feb 15 13:42:36 localhost kernel: [4294672.710000] IP: routing cache hash table of 8192 buckets, 64Kbytes
Feb 15 13:42:36 localhost kernel: [4294672.710000] TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
Feb 15 13:42:36 localhost kernel: [4294672.712000] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
Feb 15 13:42:36 localhost kernel: [4294672.712000] TCP: Hash tables configured (established 262144 bind 65536)
Feb 15 13:42:36 localhost kernel: [4294672.712000] NET: Registered protocol family 8
Feb 15 13:42:36 localhost kernel: [4294672.712000] NET: Registered protocol family 20
Feb 15 13:42:36 localhost kernel: [4294672.712000] ACPI wakeup devices:
Feb 15 13:42:36 localhost kernel: [4294672.712000] FUTS PCI0 USB0 USB1 USB2 USB3 MAC0 AMR0 UAR1 UAR2 PS2K
Feb 15 13:42:36 localhost kernel: [4294672.712000] ACPI: (supports S0 S3 S4 S5)
Feb 15 13:42:36 localhost kernel: [4294672.713000] Freeing unused kernel memory: 224k freed
Feb 15 13:42:36 localhost kernel: [4294672.745000] input: AT Translated Set 2 keyboard on isa0060/serio0
Feb 15 13:42:36 localhost kernel: [4294672.748000] vga16fb: mapped to 0xc00a0000Feb 15 13:42:36 localhost kernel: [4294672.870000] Console: switching to colour frame buffer device 80x30
Feb 15 13:42:36 localhost kernel: [4294672.870000] fb0: VGA16 VGA frame buffer device
Feb 15 13:42:36 localhost kernel: [4294673.968000] Capability LSM initialized
Feb 15 13:42:36 localhost kernel: [4294673.977000] NET: Registered protocol family 1
Feb 15 13:42:36 localhost kernel: [4294673.987000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Feb 15 13:42:36 localhost kernel: [4294673.987000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Feb 15 13:42:36 localhost kernel: [4294673.987000] ACPI: bus type ide registeredFeb 15 13:42:36 localhost kernel: [4294673.995000] SIS5513: IDE controller at PCI slot 0000:00:02.5
Feb 15 13:42:36 localhost kernel: [4294673.995000] SIS5513: chipset revision 1
Feb 15 13:42:36 localhost kernel: [4294673.995000] SIS5513: not 100%% native mode: will probe irqs later
Feb 15 13:42:36 localhost kernel: [4294673.995000] SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
Feb 15 13:42:36 localhost kernel: [4294673.995000]     ide0: BM-DMA at 0x4000-0x4007, BIOS settings: hda:DMA, hdb:pio
Feb 15 13:42:36 localhost kernel: [4294673.995000]     ide1: BM-DMA at 0x4008-0x400f, BIOS settings: hdc:DMA, hdd:DMA
Feb 15 13:42:36 localhost kernel: [4294674.259000] hda: ST3160021A, ATA DISK drive
Feb 15 13:42:36 localhost kernel: [4294674.871000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Feb 15 13:42:36 localhost kernel: [4294675.543000] hdc: DVD-ROM BDV316E, ATAPI CD/DVD-ROM drive
Feb 15 13:42:36 localhost kernel: [4294676.257000] hdd: HL-DT-ST DVDRAM GSA-4040B, ATAPI CD/DVD-ROM drive
Feb 15 13:42:36 localhost kernel: [4294676.308000] ide1 at 0x170-0x177,0x376 on irq 15
Feb 15 13:42:36 localhost kernel: [4294678.359000] hda: max request size: 1024KiB
Feb 15 13:42:36 localhost kernel: [4294678.360000] hda: 312581808 sectors (160041 MB) w/2048KiB Cache, CHS=19457/255/63, UDMA(100)
Feb 15 13:42:36 localhost kernel: [4294678.360000] hda: cache flushes supported
Feb 15 13:42:36 localhost kernel: [4294678.360000]  /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 p6 > p4
Feb 15 13:42:36 localhost kernel: [4294678.398000] hdc: ATAPI 40X DVD-ROM drive, 512kB Cache
Feb 15 13:42:36 localhost kernel: [4294678.398000] Uniform CD-ROM driver Revision: 3.20
Feb 15 13:42:36 localhost kernel: [4294678.401000] hdd: ATAPI 32X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
Feb 15 13:42:36 localhost kernel: [4294678.739000] Attempting manual resume
Feb 15 13:42:36 localhost kernel: [4294678.740000] swsusp: Suspend partition has wrong signature?
Feb 15 13:42:36 localhost kernel: [4294678.776000] usbcore: registered new driver usbfs
Feb 15 13:42:36 localhost kernel: [4294678.776000] usbcore: registered new driver hub
Feb 15 13:42:36 localhost kernel: [4294678.777000] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 20
Feb 15 13:42:36 localhost kernel: [4294678.777000] ohci_hcd 0000:00:03.0: Silicon Integrated Systems [SiS] USB 1.0 Controller
Feb 15 13:42:36 localhost kernel: [4294678.800000] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
Feb 15 13:42:36 localhost kernel: [4294678.800000] ohci_hcd 0000:00:03.0: irq 20, io mem 0xeb013000
Feb 15 13:42:36 localhost kernel: [4294678.853000] hub 1-0:1.0: USB hub found
Feb 15 13:42:36 localhost kernel: [4294678.853000] hub 1-0:1.0: 3 ports detectedFeb 15 13:42:36 localhost kernel: [4294678.856000] ACPI: PCI Interrupt 0000:00:03.1[b] -> GSI 21 (level, low) -> IRQ 21
Feb 15 13:42:36 localhost kernel: [4294678.856000] ohci_hcd 0000:00:03.1: Silicon Integrated Systems [SiS] USB 1.0 Controller (#2)
Feb 15 13:42:36 localhost kernel: [4294678.868000] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
Feb 15 13:42:36 localhost kernel: [4294678.868000] ohci_hcd 0000:00:03.1: irq 21, io mem 0xeb016000
Feb 15 13:42:36 localhost kernel: [4294678.921000] hub 2-0:1.0: USB hub found
Feb 15 13:42:36 localhost kernel: [4294678.921000] hub 2-0:1.0: 3 ports detectedFeb 15 13:42:36 localhost kernel: [4294678.924000] ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 22 (level, low) -> IRQ 22
Feb 15 13:42:36 localhost kernel: [4294678.924000] ohci_hcd 0000:00:03.2: Silicon Integrated Systems [SiS] USB 1.0 Controller (#3)
Feb 15 13:42:36 localhost kernel: [4294678.936000] ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3
Feb 15 13:42:36 localhost kernel: [4294678.936000] ohci_hcd 0000:00:03.2: irq 22, io mem 0xeb010000
Feb 15 13:42:36 localhost kernel: [4294678.989000] hub 3-0:1.0: USB hub found
Feb 15 13:42:36 localhost kernel: [4294678.989000] hub 3-0:1.0: 2 ports detectedFeb 15 13:42:36 localhost kernel: [4294679.010000] ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 23
Feb 15 13:42:36 localhost kernel: [4294679.010000] ehci_hcd 0000:00:03.3: Silicon Integrated Systems [SiS] USB 2.0 Controller
Feb 15 13:42:36 localhost kernel: [4294679.010000] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 4
Feb 15 13:42:36 localhost kernel: [4294679.010000] ehci_hcd 0000:00:03.3: irq 23, io mem 0xeb011000
Feb 15 13:42:36 localhost kernel: [4294679.010000] ehci_hcd 0000:00:03.3: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
Feb 15 13:42:36 localhost kernel: [4294679.010000] hub 4-0:1.0: USB hub found
Feb 15 13:42:36 localhost kernel: [4294679.010000] hub 4-0:1.0: 8 ports detectedFeb 15 13:42:36 localhost kernel: [4294679.038000] sis900.c: v1.08.08 Jan. 22 2005
Feb 15 13:42:36 localhost kernel: [4294679.038000] ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 19
Feb 15 13:42:36 localhost kernel: [4294679.039000] 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1.
Feb 15 13:42:36 localhost kernel: [4294679.048000] 0000:00:04.0: Using transceiver found at address 1 as default
Feb 15 13:42:36 localhost kernel: [4294679.048000] eth0: SiS 900 PCI Fast Ethernet at 0xd800, IRQ 19, 00:0d:87:bf:88:f7.
Feb 15 13:42:36 localhost kernel: [4294680.403000] usb 1-1: new low speed USB device using ohci_hcd and address 3
Feb 15 13:42:36 localhost kernel: [4294680.698000] usb 2-1: new low speed USB device using ohci_hcd and address 2
Feb 15 13:42:36 localhost kernel: [4294680.989000] usb 2-2: new full speed USB device using ohci_hcd and address 3
Feb 15 13:42:36 localhost kernel: [4294681.273000] usb 2-3: new full speed USB device using ohci_hcd and address 4
Feb 15 13:42:36 localhost kernel: [4294681.383000] usbcore: registered new driver hiddev
Feb 15 13:42:36 localhost kernel: [4294681.395000] input: USB HID v1.10 Keyboard [Chicony USB Wireless HID Receiver] on usb-0000:00:03.0-1
Feb 15 13:42:36 localhost kernel: [4294681.419000] input,hiddev96: USB HID v1.10 Device [Chicony USB Wireless HID Receiver] on usb-0000:00:03.0-1
Feb 15 13:42:36 localhost kernel: [4294691.425000] drivers/usb/input/hid-core.c: timeout initializing reports
Feb 15 13:42:36 localhost kernel: [4294691.425000]
Feb 15 13:42:36 localhost kernel: [4294691.427000] input: USB HID v1.10 Mouse [Chicony USB Wireless HID Receiver] on usb-0000:00:03.0-1
Feb 15 13:42:36 localhost kernel: [4294691.435000] input: USB HID v1.10 Device [Cypress Semiconductor Cypress CY7C637xx USB Mouse v?.?] on usb-0000:00:03.1-1
Feb 15 13:42:36 localhost kernel: [4294691.435000] usbcore: registered new driver usbhid
Feb 15 13:42:36 localhost kernel: [4294691.435000] drivers/usb/input/hid-core.c: v2.01:USB HID core driver
Feb 15 13:42:36 localhost kernel: [4294691.612000] usb 3-1: new low speed USB device using ohci_hcd and address 2
Feb 15 13:42:36 localhost kernel: [4294691.719000] input: USB HID v1.10 Mouse [062a:0001] on usb-0000:00:03.2-1
Feb 15 13:42:36 localhost kernel: [4294691.810000] ACPI: Fan [FAN] (on)
Feb 15 13:42:36 localhost kernel: [4294691.813000] ACPI: CPU0 (power states: C1[C1])
Feb 15 13:42:36 localhost kernel: [4294691.814000] ACPI: Thermal Zone [THRM] (40 C)
Feb 15 13:42:36 localhost kernel: [4294691.959000] Attempting manual resume
Feb 15 13:42:36 localhost kernel: [4294691.976000] swsusp: Suspend partition has wrong signature?
Feb 15 13:42:36 localhost kernel: [4294691.998000] kjournald starting.  Commit interval 5 seconds
Feb 15 13:42:36 localhost kernel: [4294691.998000] EXT3-fs: mounted filesystem with ordered data mode.
Feb 15 13:42:36 localhost kernel: [4294693.340000] md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
Feb 15 13:42:36 localhost kernel: [4294695.830000] Adding 2096408k swap on /dev/hda5.  Priority:-1 extents:1
Feb 15 13:42:36 localhost kernel: [4294695.955000] EXT3 FS on hda2, internal journal
Feb 15 13:42:36 localhost kernel: [4294700.976000] parport: PnPBIOS parport detected.
Feb 15 13:42:36 localhost kernel: [4294700.976000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
Feb 15 13:42:36 localhost kernel: [4294701.063000] lp0: using parport0 (interrupt-driven).
Feb 15 13:42:36 localhost kernel: [4294701.095000] mice: PS/2 mouse device common for all mice
Feb 15 13:42:36 localhost kernel: [4294701.144000] SCSI subsystem initialized
Feb 15 13:42:36 localhost kernel: [4294701.148000] sbp2: $Rev: 1219 $ Ben Collins <bcollins@debian.org>
Feb 15 13:42:36 localhost kernel: [4294701.221000] Linux agpgart interface v0.101 (c) Dave Jones
Feb 15 13:42:36 localhost kernel: [4294701.238000] nvidia: module license 'NVIDIA' taints kernel.
Feb 15 13:42:36 localhost kernel: [4294701.248000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
Feb 15 13:42:36 localhost kernel: [4294701.249000] NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module  1.0-7667  Fri Jun 17 07:01:04 PDT 2005
Feb 15 13:42:36 localhost kernel: [4294704.715000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
Feb 15 13:42:36 localhost kernel: [4294705.424000] cdrom: open failed.
Feb 15 13:42:36 localhost kernel: [4294705.436000] cdrom: open failed.
Feb 15 13:42:36 localhost kernel: [4294706.256000] kjournald starting.  Commit interval 5 seconds
Feb 15 13:42:36 localhost kernel: [4294706.256000] EXT3 FS on hda4, internal journal
Feb 15 13:42:36 localhost kernel: [4294706.257000] EXT3-fs: mounted filesystem with ordered data mode.
Feb 15 13:42:36 localhost kernel: [4294707.445000] agpgart: Detected AGP bridge 0
Feb 15 13:42:36 localhost kernel: [4294707.462000] agpgart: AGP aperture is 128M @ 0xe0000000
Feb 15 13:42:36 localhost kernel: [4294707.529000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Feb 15 13:42:36 localhost kernel: [4294707.759000] ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 18
Feb 15 13:42:36 localhost kernel: [4294708.068000] intel8x0_measure_ac97_clock: measured 49721 usecs
Feb 15 13:42:36 localhost kernel: [4294708.068000] intel8x0: clocking to 48000
Feb 15 13:42:36 localhost kernel: [4294708.852000] Linux video capture interface: v1.00
Feb 15 13:42:36 localhost kernel: [4294708.893000] bttv: driver version 0.9.15 loaded
Feb 15 13:42:36 localhost kernel: [4294708.893000] bttv: using 8 buffers with 2080k (520 pages) each for capture
Feb 15 13:42:36 localhost kernel: [4294708.896000] bttv: Bt8xx card found (0).
Feb 15 13:42:36 localhost kernel: [4294708.896000] ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 18
Feb 15 13:42:36 localhost kernel: [4294708.896000] bttv0: Bt878 (rev 17) at 0000:00:0a.0, irq: 18, latency: 32, mmio: 0xeb014000
Feb 15 13:42:36 localhost kernel: [4294708.896000] bttv0: detected: Leadtek WinFast TV 2000 [card=34], PCI subsystem ID is 107d:6606
Feb 15 13:42:36 localhost kernel: [4294708.896000] bttv0: using: Leadtek WinFast 2000/ WinFast 2000 XP [card=34,insmod option]
Feb 15 13:42:36 localhost kernel: [4294708.919000] bttv0: using tuner=3
Feb 15 13:42:36 localhost kernel: [4294708.919000] bttv0: i2c: checking for MSP34xx @ 0x80... not found
Feb 15 13:42:36 localhost kernel: [4294708.921000] bttv0: i2c: checking for TDA9875 @ 0xb0... not found
Feb 15 13:42:36 localhost kernel: [4294708.923000] bttv0: i2c: checking for TDA7432 @ 0x8a... not found
Feb 15 13:42:36 localhost kernel: [4294708.925000] bttv0: i2c: checking for TDA9887 @ 0x86... not found
Feb 15 13:42:36 localhost kernel: [4294708.946000] tuner 0-0061: chip found @ 0xc2 (bt878 #0 [sw])
Feb 15 13:42:36 localhost kernel: [4294708.946000] tuner 0-0061: type set to 3 (Philips (SECAM+PAL_BG) (FI1216MF, FM1216MF, FR1216MF))
Feb 15 13:42:36 localhost kernel: [4294708.978000] bttv0: registered device video0
Feb 15 13:42:36 localhost kernel: [4294708.978000] bttv0: registered device vbi0Feb 15 13:42:36 localhost kernel: [4294708.979000] bttv0: registered device radio0
Feb 15 13:42:36 localhost kernel: [4294708.979000] bttv0: PLL: 28636363 => 35468950 .. ok
Feb 15 13:42:36 localhost kernel: [4294709.001000] bttv0: add subdevice "remote0"
Feb 15 13:42:36 localhost kernel: [4294709.144000] bt878: AUDIO driver version 0.0.0 loaded
Feb 15 13:42:36 localhost kernel: [4294709.147000] bt878: Bt878 AUDIO function found (0).
Feb 15 13:42:36 localhost kernel: [4294709.147000] ACPI: PCI Interrupt 0000:00:0a.1[A] -> GSI 18 (level, low) -> IRQ 18
Feb 15 13:42:36 localhost kernel: [4294709.147000] bt878(0): Bt878 (rev 17) at 00:0a.1, irq: 18, latency: 32, memory: 0xeb015000
Feb 15 13:42:36 localhost kernel: [4294709.259000] ohci1394: $Rev: 1250 $ Ben Collins <bcollins@debian.org>
Feb 15 13:42:36 localhost kernel: [4294709.259000] ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 17 (level, low) -> IRQ 17
Feb 15 13:42:36 localhost kernel: [4294709.259000] PCI: Via IRQ fixup for 0000:00:0c.0, from 9 to 1
Feb 15 13:42:36 localhost kernel: [4294709.316000] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[17]  MMIO=[eb017000-eb0177ff]  Max Packet=[2048]
Feb 15 13:42:36 localhost kernel: [4294711.240000] usbcore: registered new driver spca5xx
Feb 15 13:42:36 localhost kernel: [4294711.240000] drivers/usb/media/spca5xx/spca5xx-core.c: spca5xx driver 00.57.02 registered
Feb 15 13:42:36 localhost kernel: [4294711.327000] Initializing USB Mass Storage driver...
Feb 15 13:42:36 localhost kernel: [4294711.332000] scsi0 : SCSI emulation for USB Mass Storage devices
Feb 15 13:42:36 localhost kernel: [4294711.336000] usbcore: registered new driver usb-storage
Feb 15 13:42:36 localhost kernel: [4294711.336000] USB Mass Storage support registered.
Feb 15 13:42:36 localhost kernel: [4294711.559000] Real Time Clock Driver v1.12
Feb 15 13:42:36 localhost kernel: [4294711.637000] input: PC Speaker
Feb 15 13:42:36 localhost kernel: [4294711.706000] Floppy drive(s): fd0 is 1.44MFeb 15 13:42:36 localhost kernel: [4294711.722000] FDC 0 is a post-1991 82077
Feb 15 13:42:36 localhost kernel: [4294712.311000] ts: Compaq touchscreen protocol output
Feb 15 13:42:36 localhost kernel: [4294713.858000] ip_tables: (C) 2000-2002 Netfilter core team
Feb 15 13:42:36 localhost kernel: [4294713.880000] ip_conntrack version 2.1 (8191 buckets, 65528 max) - 248 bytes per conntrack
Feb 15 13:42:36 localhost kernel: [4294714.995000] NET: Registered protocol family 17
Feb 15 13:42:36 localhost kernel: [4294715.806000] eth0: Media Link On 100mbps full-duplex
Feb 15 13:42:36 localhost kernel: [4294716.342000]   Vendor:           Model: USB Card Reader   Rev: 1.1f
Feb 15 13:42:36 localhost kernel: [4294716.342000]   Type:   Direct-Access                 ANSI SCSI revision: 00
Feb 15 13:42:36 localhost kernel: [4294716.349000]   Vendor:           Model: USB Card Reader   Rev: 1.1f
Feb 15 13:42:36 localhost kernel: [4294716.349000]   Type:   Direct-Access                 ANSI SCSI revision: 00
Feb 15 13:42:36 localhost kernel: [4294716.357000]   Vendor:           Model: USB Card Reader   Rev: 1.1f
Feb 15 13:42:36 localhost kernel: [4294716.357000]   Type:   Direct-Access                 ANSI SCSI revision: 00
Feb 15 13:42:36 localhost kernel: [4294716.365000]   Vendor:           Model: USB Card Reader   Rev: 1.1f
Feb 15 13:42:36 localhost kernel: [4294716.365000]   Type:   Direct-Access                 ANSI SCSI revision: 00
Feb 15 13:42:36 localhost kernel: [4294716.524000] Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
Feb 15 13:42:36 localhost kernel: [4294716.557000] Attached scsi removable disk sdb at scsi0, channel 0, id 0, lun 1
Feb 15 13:42:36 localhost kernel: [4294716.590000] Attached scsi removable disk sdc at scsi0, channel 0, id 0, lun 2
Feb 15 13:42:36 localhost kernel: [4294716.622000] Attached scsi removable disk sdd at scsi0, channel 0, id 0, lun 3
Feb 15 13:42:36 localhost kernel: [4294722.844000] NET: Registered protocol family 10
Feb 15 13:42:36 localhost kernel: [4294722.844000] Disabled Privacy Extensions on device c02eb280(lo)
Feb 15 13:42:36 localhost kernel: [4294722.845000] IPv6 over IPv4 tunneling driver
Feb 15 13:42:36 localhost kernel: [4294723.744000] ACPI: Power Button (FF) [PWRF]
Feb 15 13:42:36 localhost kernel: [4294723.744000] ACPI: Power Button (CM) [PWRB]
Feb 15 13:42:36 localhost kernel: [4294723.744000] ACPI: Sleep Button (CM) [FUTS]
Feb 15 13:42:39 localhost hpiod: 0.9.5 accepting connections at 32769...
Feb 15 13:42:40 localhost kernel: [4294727.880000] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
Feb 15 13:42:40 localhost kernel: [4294727.880000] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
Feb 15 13:42:40 localhost kernel: [4294727.881000] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
Feb 15 13:42:40 localhost kernel: [4294728.066000] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
Feb 15 13:42:40 localhost kernel: [4294728.066000] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
Feb 15 13:42:40 localhost kernel: [4294728.066000] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
Feb 15 13:42:40 localhost hp: unable to open /var/run/hplip/hpssd.port: No such file or directory: prnt/hpijs/hplip_api.c 84
Feb 15 13:42:40 localhost hp: unable to connect hpssd socket 50002: Connection refused: prnt/hpijs/hplip_api.c 710
Feb 15 13:42:42 localhost kernel: [4294730.355000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
Feb 15 13:42:42 localhost kernel: [4294730.355000] apm: overridden by ACPI.
Feb 15 13:42:44 localhost kernel: [4294731.750000] powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.40.4)
Feb 15 13:42:44 localhost kernel: [4294731.750000] powernow-k8: invalid freq entries 2000000 kHz vs. 1667000 kHz
Feb 15 13:42:44 localhost kernel: [4294731.750000] powernow-k8: invalid freq entries 1800000 kHz vs. 1500000 kHz
Feb 15 13:42:44 localhost kernel: [4294731.750000] powernow-k8: invalid freq entries 800000 kHz vs. 667000 kHz
Feb 15 13:42:45 localhost kernel: [4294732.671000] Bluetooth: Core ver 2.7
Feb 15 13:42:45 localhost kernel: [4294732.671000] NET: Registered protocol family 31
Feb 15 13:42:45 localhost kernel: [4294732.671000] Bluetooth: HCI device and connection manager initialized
Feb 15 13:42:45 localhost kernel: [4294732.671000] Bluetooth: HCI socket layer initialized
Feb 15 13:42:45 localhost kernel: [4294732.972000] Bluetooth: L2CAP ver 2.7
Feb 15 13:42:45 localhost kernel: [4294732.972000] Bluetooth: L2CAP socket layer initialized
Feb 15 13:42:45 localhost kernel: [4294733.037000] Bluetooth: RFCOMM ver 1.5
Feb 15 13:42:45 localhost kernel: [4294733.037000] Bluetooth: RFCOMM socket layer initialized
Feb 15 13:42:45 localhost kernel: [4294733.037000] Bluetooth: RFCOMM TTY layer initialized
Feb 15 13:42:54 localhost gconfd (isaric-10155): démarrage (version 2.12.0), pid 10155 utilisateur « isaric »
Feb 15 13:42:54 localhost gconfd (isaric-10155): Adresse « xml:readonly:/etc/gconf/gconf.xml.mandatory » résolue vers une source de configuration en lecture seule à la position 0
Feb 15 13:42:54 localhost gconfd (isaric-10155): Adresse « xml:readonly:/usr/share/gconf/local.mandatory » résolue vers une source de configuration en lecture seule à la position 1
Feb 15 13:42:54 localhost gconfd (isaric-10155): Adresse « xml:readwrite:/home/isaric/.gconf » résolue vers une source de configuration accessible en écriture à la position 2
Feb 15 13:42:54 localhost gconfd (isaric-10155): Adresse « xml:readonly:/etc/gconf/gconf.xml.defaults » résolue vers une source de configuration en lecture seule à la position 3
Feb 15 13:42:54 localhost gconfd (isaric-10155): Adresse « xml:readonly:/usr/share/gconf/local.defaults » résolue vers une source de configuration en lecture seule à la position 4
Feb 15 13:42:54 localhost gconfd (isaric-10155): Adresse « xml:readonly:/usr/share/gconf/cdd.defaults » résolue vers une source de configuration en lecture seule à la position 5
Feb 15 13:42:54 localhost gconfd (isaric-10155): Adresse « xml:readonly:/usr/share/gconf/debian.defaults » résolue vers une source de configuration en lecture seule à la position 6
Feb 15 13:42:54 localhost gconfd (isaric-10155): Adresse « xml:readonly:/var/lib/gconf/defaults » résolue vers une source de configuration en lecture seule à la position 7
Feb 15 13:43:03 localhost gconfd (isaric-10155): Adresse « xml:readwrite:/home/isaric/.gconf » résolue vers une source de configuration accessible en écriture à la position 0
isaric@acer:/lib/modules/2.6.12-10-386/kernel/drivers/usb/media/spca5xx$

isaric@acer:/lib/modules/2.6.12-10-386/kernel/drivers/usb/media/spca5xx$ ls -l / lib/modules/2.6.12-10-386/kernel/drivers/usb/media/spca5xx/
total 644
-rw-r--r--  1 root root 349148 2006-02-15 13:45 spca5xx.ko
-rw-r--r--  1 root root 296035 2006-01-16 21:47 spca5xx.ko.sav
isaric@acer:/lib/modules/2.6.12-10-386/kernel/drivers/usb/media/spca5xx$

Isaric

Oups, au redémarrage d'UBUNTU la camera fonctionne avec une qualité vraiment médiocre 😐

Et en plus ma tête est à l'envers. Est-ce normal ?

Pour cela, j'ai utilisé

isaric@acer:~$ spcaview -d /dev/video1 -f jpg -s 352x288

Car camorama a toujours "could not connect .../dev/videoO"

que faire ???
et aussi comment changer dans Camorama /dev/video0 par /dev/video1

Michel Xhaard a écritBon il faut espérer qu'un donateur me fera parvenir ce modèle de webcam car la
qualité pour le moment est assez passable et la tête a l'envers pas terrible
du tout

Isaric

Ce matin la led bleu est restée allumée après le démarrage.
J'ai lancé : isaric@acer:~$ spcaview -d /dev/video1 -f jpg -s 352x288
Et je vois une page noire et c'est à la deuxième relance que tout est revenu dans l'ordre (ou à l'envers 😃).

Choup's

Et bien maintenant, tu es tout comme moi...😉
Effectivement, la webcam à l'envers c'est moins stable :lol:

Isaric

Choup's a écritEt bien maintenant, tu es tout comme moi...😉
Effectivement, la webcam à l'envers c'est moins stable :lol:

Sauf que moi je n'arrive pas à avoir Camorama car il demande à ce connecter sur /dev/videoO et que la webcam est sur /dev/video1

Et même après avoir fais

sudo modprobe -f spca5xx

Arrives-tu à la mettre sur aMSN et comment ?
ainsi que sur Ekiga avec sip : 500@ekiga.net ?

Anbreizh

POur Amsn, il suffit de faire :

::config::setKey webcamDevice /dev/video1:0

Pour utilise le dev/video1 sous Amsn 😉

Isaric

isaric@acer:~$ ::config::setKey webcamDevice /dev/video1:0
bash: ::config::setKey: command not found
isaric@acer:~$

😐

IdoMcFly

Isaric a écrit

isaric@acer:~$ ::config::setKey webcamDevice /dev/video1:0
bash: ::config::setKey: command not found
isaric@acer:~$

😐

le truc posté est à mettre dans le fichier d econfd amsn je suppose.
quelque chose comme ~/.amsnrc ou un truc avec amsn dedans 🙂

Isaric

En fin compte, j'ai cliqué dans les
-->préférences, puis dans
-->configurer la webcam et aussi
--> changer les paramêtres vidéo et pour finir sur une fenêtre
-->"webcam chooser", j'ai sélectionné
-->"V4L Philips SPC 200NC", j'ai cliqué sur la seule ligne canaux disponible et je me suis apperçu en vidéo.

J'ai fait plusieurs essais avec un ami sur windows et impossible de lui envoyer ma vidéo, ni de recevoir une conversation sonore ! 🙁
Remarque pour le son c'est en projet mais pour une autre version aMSN.

Par contre je reçois bien la sienne de vidéo !

Je vais essayer de configurer la plage des ports Freebox 6891 à 6900 en tcp et vers mon IP lan (et je reviens pour donner le résultat)

« Page précédente Page suivante »