J'indique le retour de l'invite dmesg :caocoa@C40C04:~$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.31-16-generic-pae (buildd@rothera) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #53-Ubuntu SMP Tue Dec 8 05:20:21 UTC 2009 (Ubuntu 2.6.31-16.53-generic-pae)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d8000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf8b1000 (usable)
[ 0.000000] BIOS-e820: 00000000bf8b1000 - 00000000bf8b7000 (reserved)
[ 0.000000] BIOS-e820: 00000000bf8b7000 - 00000000bf9bc000 (usable)
[ 0.000000] BIOS-e820: 00000000bf9bc000 - 00000000bfa0f000 (reserved)
[ 0.000000] BIOS-e820: 00000000bfa0f000 - 00000000bfb08000 (usable)
[ 0.000000] BIOS-e820: 00000000bfb08000 - 00000000bfd0f000 (reserved)
[ 0.000000] BIOS-e820: 00000000bfd0f000 - 00000000bfd19000 (usable)
[ 0.000000] BIOS-e820: 00000000bfd19000 - 00000000bfd1f000 (reserved)
[ 0.000000] BIOS-e820: 00000000bfd1f000 - 00000000bfd64000 (usable)
[ 0.000000] BIOS-e820: 00000000bfd64000 - 00000000bfd9f000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfd9f000 - 00000000bfde4000 (usable)
[ 0.000000] BIOS-e820: 00000000bfde4000 - 00000000bfdfd000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bfdfd000 - 00000000bfe00000 (usable)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] DMI present.
[ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 100000000 mask FC0000000 write-back
[ 0.000000] 3 base 0FFE00000 mask FFFF80000 write-protect
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable)
[ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 000000000009f400 (usable)
[ 0.000000] modified: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000d2000 - 00000000000d4000 (reserved)
[ 0.000000] modified: 00000000000d8000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000bf8b1000 (usable)
[ 0.000000] modified: 00000000bf8b1000 - 00000000bf8b7000 (reserved)
[ 0.000000] modified: 00000000bf8b7000 - 00000000bf9bc000 (usable)
[ 0.000000] modified: 00000000bf9bc000 - 00000000bfa0f000 (reserved)
[ 0.000000] modified: 00000000bfa0f000 - 00000000bfb08000 (usable)
[ 0.000000] modified: 00000000bfb08000 - 00000000bfd0f000 (reserved)
[ 0.000000] modified: 00000000bfd0f000 - 00000000bfd19000 (usable)
[ 0.000000] modified: 00000000bfd19000 - 00000000bfd1f000 (reserved)
[ 0.000000] modified: 00000000bfd1f000 - 00000000bfd64000 (usable)
[ 0.000000] modified: 00000000bfd64000 - 00000000bfd9f000 (ACPI NVS)
[ 0.000000] modified: 00000000bfd9f000 - 00000000bfde4000 (usable)
[ 0.000000] modified: 00000000bfde4000 - 00000000bfdfd000 (ACPI data)
[ 0.000000] modified: 00000000bfdfd000 - 00000000bfe00000 (usable)
[ 0.000000] modified: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000379fe000
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] 0000000000 - 0000200000 page 4k
[ 0.000000] 0000200000 - 0037800000 page 2M
[ 0.000000] 0037800000 - 00379fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 379fe000 @ 7000-d000
[ 0.000000] RAMDISK: 37799000 - 37fef146
[ 0.000000] Allocated new RAMDISK: 008b5000 - 0110b146
[ 0.000000] Move RAMDISK from 0000000037799000 - 0000000037fef145 to 008b5000 - 0110b145
[ 0.000000] ACPI: RSDP 000f6750 00024 (v02 TOSCPL)
[ 0.000000] ACPI: XSDT bfdf45d6 00064 (v01 TOSCPL TOSCPL00 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP bfde6000 000F4 (v03 TOSCPL CRESTLNE 06040000 ALAN 00000001)
[ 0.000000] ACPI: DSDT bfde7000 0853A (v02 Intel CANTIGA 06040000 INTL 20060608)
[ 0.000000] ACPI: FACS bfd9efc0 00040
[ 0.000000] ACPI: HPET bfdfcd14 00038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: MCFG bfdfcd4c 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: SLIC bfdfcd88 00176 (v01 TOSCPL TOSCPL00 06040000 LOHR 00000000)
[ 0.000000] ACPI: OSFR bfdfcefe 00072 (v01 TOSHIB A+2nd ID 06040000 TASM 04010000)
[ 0.000000] ACPI: APIC bfdfcf70 00068 (v01 PTLTD APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT bfdfcfd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: SSDT bfde5000 00655 (v01 PmRef CpuPm 00003000 INTL 20050624)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 4230MB HIGHMEM available.
[ 0.000000] 889MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 379fe000
[ 0.000000] low ram: 0 - 379fe000
[ 0.000000] node 0 low ram: 00000000 - 379fe000
[ 0.000000] node 0 bootmap 00009000 - 0000ff40
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00379fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008ad9a0] TEXT DATA BSS ==> [0000100000 - 00008ad9a0]
[ 0.000000] #4 [000009f400 - 0000100000] BIOS reserved ==> [000009f400 - 0000100000]
[ 0.000000] #5 [00008ae000 - 00008b4174] BRK ==> [00008ae000 - 00008b4174]
[ 0.000000] #6 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000]
[ 0.000000] #7 [00008b5000 - 000110b146] NEW RAMDISK ==> [00008b5000 - 000110b146]
[ 0.000000] #8 [0000009000 - 0000010000] BOOTMAP ==> [0000009000 - 0000010000]
[ 0.000000] found SMP MP-table at [c00f6810] f6810
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000379fe
[ 0.000000] HighMem 0x000379fe -> 0x00140000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[10] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000002
[ 0.000000] 0: 0x00000006 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000bf8b1
[ 0.000000] 0: 0x000bf8b7 -> 0x000bf9bc
[ 0.000000] 0: 0x000bfa0f -> 0x000bfb08
[ 0.000000] 0: 0x000bfd0f -> 0x000bfd19
[ 0.000000] 0: 0x000bfd1f -> 0x000bfd64
[ 0.000000] 0: 0x000bfd9f -> 0x000bfde4
[ 0.000000] 0: 0x000bfdfd -> 0x000bfe00
[ 0.000000] 0: 0x00100000 -> 0x00140000
[ 0.000000] On node 0 totalpages: 1047265
[ 0.000000] free_area_init_node: node 0, pgdat c078bd20, node_mem_map c110c000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3963 pages, LIFO batch:0
[ 0.000000] Normal zone: 1748 pages used for memmap
[ 0.000000] Normal zone: 221994 pages, LIFO batch:31
[ 0.000000] HighMem zone: 8461 pages used for memmap
[ 0.000000] HighMem zone: 811067 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
[ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
[ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000d8000
[ 0.000000] PM: Registered nosave memory: 00000000000d8000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at bfe00000 (gap: bfe00000:40200000)
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages at c391c000, static data 35612 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1037024
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-16-generic-pae root=UUID=a5ccac57-3ecd-4be1-8e51-51ae769e759d ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 26214400 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000379fe:00140000)
[ 0.000000] Memory: 4104264k/5242880k available (4590k kernel code, 83992k reserved, 2147k data, 544k init, 3278112k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
[ 0.000000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)
[ 0.000000] .init : 0xc0795000 - 0xc081d000 ( 544 kB)
[ 0.000000] .data : 0xc057b994 - 0xc07947a8 (2147 kB)
[ 0.000000] .text : 0xc0100000 - 0xc057b994 (4590 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] NR_IRQS:2304 nr_irqs:424
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2128.397 MHz processor.
[ 0.001215] Console: colour VGA+ 80x25
[ 0.001218] console [tty0] enabled
[ 0.001374] hpet clockevent registered
[ 0.001379] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.001384] Calibrating delay loop (skipped), value calculated using timer frequency.. 4256.79 BogoMIPS (lpj=8513588)
[ 0.001400] Security Framework initialized
[ 0.001418] AppArmor: AppArmor initialized
[ 0.001424] Mount-cache hash table entries: 512
[ 0.001533] Initializing cgroup subsys ns
[ 0.001537] Initializing cgroup subsys cpuacct
[ 0.001541] Initializing cgroup subsys memory
[ 0.001547] Initializing cgroup subsys freezer
[ 0.001549] Initializing cgroup subsys net_cls
[ 0.001562] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.001564] CPU: L2 cache: 3072K
[ 0.001567] CPU: Physical Processor ID: 0
[ 0.001568] CPU: Processor Core ID: 0
[ 0.001571] mce: CPU supports 6 MCE banks
[ 0.001579] CPU0: Thermal monitoring enabled (TM2)
[ 0.001582] using mwait in idle threads.
[ 0.001587] Performance Counters: Core2 events, Intel PMU driver.
[ 0.001593] ... version: 2
[ 0.001594] ... bit width: 40
[ 0.001596] ... generic counters: 2
[ 0.001597] ... value mask: 000000ffffffffff
[ 0.001599] ... max period: 000000007fffffff
[ 0.001601] ... fixed-purpose counters: 3
[ 0.001602] ... counter mask: 0000000700000003
[ 0.001606] Checking 'hlt' instruction... OK.
[ 0.018558] ACPI: Core revision 20090521
[ 0.032391] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.072429] CPU0: Intel(R) Core(TM)2 Duo CPU P7450 @ 2.13GHz stepping 06
[ 0.076001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 4255.96 BogoMIPS (lpj=8511934)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 3072K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.004000] mce: CPU supports 6 MCE banks
[ 0.004000] CPU1: Thermal monitoring enabled (TM2)
[ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.161504] CPU1: Intel(R) Core(TM)2 Duo CPU P7450 @ 2.13GHz stepping 06
[ 0.161516] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.164018] Brought up 2 CPUs
[ 0.164021] Total of 2 processors activated (8512.76 BogoMIPS).
[ 0.164069] CPU0 attaching sched-domain:
[ 0.164072] domain 0: span 0-1 level MC
[ 0.164074] groups: 0 1
[ 0.164079] CPU1 attaching sched-domain:
[ 0.164081] domain 0: span 0-1 level MC
[ 0.164084] groups: 1 0
[ 0.164153] Booting paravirtualized kernel on bare hardware
[ 0.164190] regulator: core version 0.5
[ 0.164190] Time: 14:34:40 Date: 12/19/09
[ 0.164190] NET: Registered protocol family 16
[ 0.164191] EISA bus registered
[ 0.164199] ACPI: bus type pci registered
[ 0.164261] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.164263] PCI: Not using MMCONFIG.
[ 0.164640] PCI: PCI BIOS revision 3.00 entry at 0xfdde1, last bus=38
[ 0.164642] PCI: Using configuration type 1 for base access
[ 0.165556] bio: create slab <bio-0> at 0
[ 0.168753] ACPI: EC: Look up EC in DSDT
[ 0.171905] ACPI: BIOS _OSI(Linux) query ignored
[ 0.173399] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.200067] ACPI: Interpreter enabled
[ 0.200072] ACPI: (supports S0 S3 S4 S5)
[ 0.200126] ACPI: Using IOAPIC for interrupt routing
[ 0.200174] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.240379] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.240381] PCI: Using MMCONFIG for extended config space
[ 0.283406] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 0.283408] ACPI: EC: driver started in interrupt mode
[ 0.283665] ACPI: No dock devices found.
[ 0.284150] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.284248] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.284252] pci 0000:00:01.0: PME# disabled
[ 0.284350] pci 0000:00:1a.0: reg 20 io port: [0x1800-0x181f]
[ 0.284444] pci 0000:00:1a.1: reg 20 io port: [0x1820-0x183f]
[ 0.284538] pci 0000:00:1a.2: reg 20 io port: [0x1840-0x185f]
[ 0.284633] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf2504800-0xf2504bff]
[ 0.284702] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.284707] pci 0000:00:1a.7: PME# disabled
[ 0.284764] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf2500000-0xf2503fff]
[ 0.284825] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.284829] pci 0000:00:1b.0: PME# disabled
[ 0.284915] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.284920] pci 0000:00:1c.0: PME# disabled
[ 0.285010] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.285015] pci 0000:00:1c.2: PME# disabled
[ 0.285104] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.285108] pci 0000:00:1c.3: PME# disabled
[ 0.285199] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.285203] pci 0000:00:1c.5: PME# disabled
[ 0.285279] pci 0000:00:1d.0: reg 20 io port: [0x1860-0x187f]
[ 0.285373] pci 0000:00:1d.1: reg 20 io port: [0x1880-0x189f]
[ 0.285467] pci 0000:00:1d.2: reg 20 io port: [0x18a0-0x18bf]
[ 0.285561] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf2504c00-0xf2504fff]
[ 0.285630] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.285635] pci 0000:00:1d.7: PME# disabled
[ 0.285890] pci 0000:00:1f.2: reg 10 io port: [0x18f0-0x18f7]
[ 0.285898] pci 0000:00:1f.2: reg 14 io port: [0x18e4-0x18e7]
[ 0.285906] pci 0000:00:1f.2: reg 18 io port: [0x18e8-0x18ef]
[ 0.285914] pci 0000:00:1f.2: reg 1c io port: [0x18e0-0x18e3]
[ 0.285921] pci 0000:00:1f.2: reg 20 io port: [0x18c0-0x18df]
[ 0.285930] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf2504000-0xf25047ff]
[ 0.285977] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.285982] pci 0000:00:1f.2: PME# disabled
[ 0.286023] pci 0000:00:1f.3: reg 10 64bit mmio: [0x000000-0x0000ff]
[ 0.286042] pci 0000:00:1f.3: reg 20 io port: [0x1c00-0x1c1f]
[ 0.286106] pci 0000:01:00.0: reg 10 32bit mmio: [0xd0000000-0xdfffffff]
[ 0.286113] pci 0000:01:00.0: reg 14 io port: [0x2000-0x20ff]
[ 0.286121] pci 0000:01:00.0: reg 18 32bit mmio: [0xcfef0000-0xcfefffff]
[ 0.286145] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.286174] pci 0000:01:00.0: supports D1 D2
[ 0.286218] pci 0000:01:00.1: reg 10 32bit mmio: [0xcfeec000-0xcfeeffff]
[ 0.286278] pci 0000:01:00.1: supports D1 D2
[ 0.286347] pci 0000:00:01.0: bridge io port: [0x2000-0x2fff]
[ 0.286351] pci 0000:00:01.0: bridge 32bit mmio: [0xcfe00000-0xcfefffff]
[ 0.286355] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.286413] pci 0000:00:1c.0: bridge io port: [0x3000-0x3fff]
[ 0.286418] pci 0000:00:1c.0: bridge 32bit mmio: [0xf4000000-0xf5ffffff]
[ 0.286426] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf0000000-0xf1ffffff]
[ 0.286489] pci 0000:0e:00.0: reg 10 io port: [0x4000-0x40ff]
[ 0.286516] pci 0000:0e:00.0: reg 18 64bit mmio: [0xf2010000-0xf2010fff]
[ 0.286534] pci 0000:0e:00.0: reg 20 64bit mmio: [0xf2000000-0xf200ffff]
[ 0.286545] pci 0000:0e:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.286601] pci 0000:0e:00.0: supports D1 D2
[ 0.286603] pci 0000:0e:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.286609] pci 0000:0e:00.0: PME# disabled
[ 0.286694] pci 0000:00:1c.2: bridge io port: [0x4000-0x4fff]
[ 0.286704] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xf2000000-0xf20fffff]
[ 0.286797] pci 0000:14:00.0: reg 10 64bit mmio: [0xf2100000-0xf2101fff]
[ 0.286914] pci 0000:14:00.0: PME# supported from D0 D3hot D3cold
[ 0.286922] pci 0000:14:00.0: PME# disabled
[ 0.287008] pci 0000:00:1c.3: bridge 32bit mmio: [0xf2100000-0xf21fffff]
[ 0.287079] pci 0000:20:00.0: reg 10 32bit mmio: [0xf2200000-0xf22007ff]
[ 0.287092] pci 0000:20:00.0: reg 14 32bit mmio: [0xf2201000-0xf220107f]
[ 0.287127] pci 0000:20:00.0: reg 20 32bit mmio: [0xf2200c00-0xf2200c7f]
[ 0.287140] pci 0000:20:00.0: reg 24 32bit mmio: [0xf2200800-0xf220087f]
[ 0.287276] pci 0000:20:00.1: reg 10 32bit mmio: [0xf2201400-0xf22014ff]
[ 0.287448] pci 0000:20:00.2: reg 10 32bit mmio: [0xf2201800-0xf22018ff]
[ 0.287620] pci 0000:20:00.3: reg 10 32bit mmio: [0xf2201c00-0xf2201cff]
[ 0.287792] pci 0000:20:00.4: reg 10 32bit mmio: [0xf2202000-0xf22020ff]
[ 0.287975] pci 0000:00:1c.5: bridge 32bit mmio: [0xf2200000-0xf22fffff]
[ 0.288056] pci 0000:00:1e.0: transparent bridge
[ 0.288102] pci_bus 0000:00: on NUMA node 0
[ 0.288107] ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT]
[ 0.288231] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.P0P2._PRT]
[ 0.288307] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.P0P1._PRT]
[ 0.288453] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.RP01._PRT]
[ 0.288520] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.RP03._PRT]
[ 0.288583] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.RP04._PRT]
[ 0.288650] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.RP06._PRT]
[ 0.298829] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.298930] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.299029] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[ 0.299127] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.299226] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.299328] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 *7 11 12 14 15)
[ 0.299426] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.299523] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.299686] SCSI subsystem initialized
[ 0.299703] libata version 3.00 loaded.
[ 0.299703] usbcore: registered new interface driver usbfs
[ 0.299703] usbcore: registered new interface driver hub
[ 0.299703] usbcore: registered new device driver usb
[ 0.299703] ACPI: WMI: Mapper loaded
[ 0.299703] PCI: Using ACPI for IRQ routing
[ 0.312010] Bluetooth: Core ver 2.15
[ 0.312022] NET: Registered protocol family 31
[ 0.312022] Bluetooth: HCI device and connection manager initialized
[ 0.312022] Bluetooth: HCI socket layer initialized
[ 0.312022] NetLabel: Initializing
[ 0.312022] NetLabel: domain hash size = 128
[ 0.312022] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.312029] NetLabel: unlabeled traffic allowed by default
[ 0.312059] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.312064] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.328005] pnp: PnP ACPI init
[ 0.328016] ACPI: bus type pnp registered
[ 0.348968] pnp: PnP ACPI: found 9 devices
[ 0.348970] ACPI: ACPI bus type pnp unregistered
[ 0.348973] PnPBIOS: Disabled by ACPI PNP
[ 0.348984] system 00:02: iomem range 0xfed00000-0xfed003ff has been reserved
[ 0.348990] system 00:04: ioport range 0x480-0x48f has been reserved
[ 0.348993] system 00:04: ioport range 0xffff-0xffff has been reserved
[ 0.348995] system 00:04: ioport range 0xffff-0xffff has been reserved
[ 0.348998] system 00:04: ioport range 0x400-0x47f has been reserved
[ 0.349001] system 00:04: ioport range 0x1180-0x11ff has been reserved
[ 0.349004] system 00:04: ioport range 0xfe00-0xfe00 has been reserved
[ 0.349006] system 00:04: ioport range 0xff2c-0xff7f has been reserved
[ 0.349012] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.349015] system 00:08: iomem range 0xfed10000-0xfed13fff has been reserved
[ 0.349018] system 00:08: iomem range 0xfed18000-0xfed18fff has been reserved
[ 0.349021] system 00:08: iomem range 0xfed19000-0xfed19fff has been reserved
[ 0.349024] system 00:08: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.349026] system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.349029] system 00:08: iomem range 0xfed40000-0xfed44fff has been reserved
[ 0.349032] system 00:08: iomem range 0xfed45000-0xfed8ffff has been reserved
[ 0.383848] AppArmor: AppArmor Filesystem Enabled
[ 0.383928] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.383932] pci 0000:00:01.0: IO window: 0x2000-0x2fff
[ 0.383936] pci 0000:00:01.0: MEM window: 0xcfe00000-0xcfefffff
[ 0.383941] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 0.383946] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.383950] pci 0000:00:1c.0: IO window: 0x3000-0x3fff
[ 0.383957] pci 0000:00:1c.0: MEM window: 0xf4000000-0xf5ffffff
[ 0.383963] pci 0000:00:1c.0: PREFETCH window: 0x000000f0000000-0x000000f1ffffff
[ 0.383972] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:0e
[ 0.383977] pci 0000:00:1c.2: IO window: 0x4000-0x4fff
[ 0.383983] pci 0000:00:1c.2: MEM window: 0xc0000000-0xc00fffff
[ 0.383993] pci 0000:00:1c.2: PREFETCH window: 0x000000f2000000-0x000000f20fffff
[ 0.384002] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:14
[ 0.384004] pci 0000:00:1c.3: IO window: disabled
[ 0.384011] pci 0000:00:1c.3: MEM window: 0xf2100000-0xf21fffff
[ 0.384016] pci 0000:00:1c.3: PREFETCH window: disabled
[ 0.384022] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:20
[ 0.384025] pci 0000:00:1c.5: IO window: disabled
[ 0.384032] pci 0000:00:1c.5: MEM window: 0xf2200000-0xf22fffff
[ 0.384037] pci 0000:00:1c.5: PREFETCH window: disabled
[ 0.384042] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:26
[ 0.384045] pci 0000:00:1e.0: IO window: disabled
[ 0.384051] pci 0000:00:1e.0: MEM window: disabled
[ 0.384057] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.384067] alloc irq_desc for 16 on node -1
[ 0.384069] alloc kstat_irqs on node -1
[ 0.384073] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.384077] pci 0000:00:01.0: setting latency timer to 64
[ 0.384084] alloc irq_desc for 17 on node -1
[ 0.384086] alloc kstat_irqs on node -1
[ 0.384089] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.384094] pci 0000:00:1c.0: setting latency timer to 64
[ 0.384102] alloc irq_desc for 18 on node -1
[ 0.384103] alloc kstat_irqs on node -1
[ 0.384107] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.384111] pci 0000:00:1c.2: setting latency timer to 64
[ 0.384119] alloc irq_desc for 19 on node -1
[ 0.384121] alloc kstat_irqs on node -1
[ 0.384124] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.384129] pci 0000:00:1c.3: setting latency timer to 64
[ 0.384137] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.384142] pci 0000:00:1c.5: setting latency timer to 64
[ 0.384150] pci 0000:00:1e.0: setting latency timer to 64
[ 0.384155] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.384157] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.384160] pci_bus 0000:01: resource 0 io: [0x2000-0x2fff]
[ 0.384162] pci_bus 0000:01: resource 1 mem: [0xcfe00000-0xcfefffff]
[ 0.384165] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
[ 0.384167] pci_bus 0000:02: resource 0 io: [0x3000-0x3fff]
[ 0.384170] pci_bus 0000:02: resource 1 mem: [0xf4000000-0xf5ffffff]
[ 0.384172] pci_bus 0000:02: resource 2 pref mem [0xf0000000-0xf1ffffff]
[ 0.384175] pci_bus 0000:0e: resource 0 io: [0x4000-0x4fff]
[ 0.384177] pci_bus 0000:0e: resource 1 mem: [0xc0000000-0xc00fffff]
[ 0.384179] pci_bus 0000:0e: resource 2 pref mem [0xf2000000-0xf20fffff]
[ 0.384182] pci_bus 0000:14: resource 1 mem: [0xf2100000-0xf21fffff]
[ 0.384184] pci_bus 0000:20: resource 1 mem: [0xf2200000-0xf22fffff]
[ 0.384187] pci_bus 0000:26: resource 3 io: [0x00-0xffff]
[ 0.384189] pci_bus 0000:26: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.384216] NET: Registered protocol family 2
[ 0.384295] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.384557] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.384888] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.385062] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.385065] TCP reno registered
[ 0.385121] NET: Registered protocol family 1
[ 0.385170] Trying to unpack rootfs image as initramfs...
[ 0.501510] Switched to high resolution mode on CPU 1
[ 0.503968] Switched to high resolution mode on CPU 0
[ 0.585719] Freeing initrd memory: 8536k freed
[ 0.588974] Simple Boot Flag at 0x36 set to 0x1
[ 0.589142] cpufreq-nforce2: No nForce2 chipset.
[ 0.589169] Scanning for low memory corruption every 60 seconds
[ 0.589295] audit: initializing netlink socket (disabled)
[ 0.589353] type=2000 audit(1261233279.588:1): initialized
[ 0.597674] highmem bounce pool size: 64 pages
[ 0.597679] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.599180] VFS: Disk quotas dquot_6.5.2
[ 0.599270] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.599812] fuse init (API version 7.12)
[ 0.599890] msgmni has been set to 1631
[ 0.600156] alg: No test for stdrng (krng)
[ 0.600169] io scheduler noop registered
[ 0.600171] io scheduler anticipatory registered
[ 0.600173] io scheduler deadline registered
[ 0.600210] io scheduler cfq registered (default)
[ 0.600361] pci 0000:01:00.0: Boot video device
[ 0.600482] alloc irq_desc for 24 on node -1
[ 0.600484] alloc kstat_irqs on node -1
[ 0.600492] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
[ 0.600499] pcieport-driver 0000:00:01.0: setting latency timer to 64
[ 0.600623] alloc irq_desc for 25 on node -1
[ 0.600625] alloc kstat_irqs on node -1
[ 0.600633] pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
[ 0.600644] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 0.600790] alloc irq_desc for 26 on node -1
[ 0.600792] alloc kstat_irqs on node -1
[ 0.600800] pcieport-driver 0000:00:1c.2: irq 26 for MSI/MSI-X
[ 0.600811] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[ 0.600956] alloc irq_desc for 27 on node -1
[ 0.600958] alloc kstat_irqs on node -1
[ 0.600966] pcieport-driver 0000:00:1c.3: irq 27 for MSI/MSI-X
[ 0.600977] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[ 0.601124] alloc irq_desc for 28 on node -1
[ 0.601125] alloc kstat_irqs on node -1
[ 0.601134] pcieport-driver 0000:00:1c.5: irq 28 for MSI/MSI-X
[ 0.601144] pcieport-driver 0000:00:1c.5: setting latency timer to 64
[ 0.601248] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.601402] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.621068] ACPI: AC Adapter [ACAD] (on-line)
[ 0.621129] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.621132] ACPI: Power Button [PWRF]
[ 0.621188] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 0.621231] ACPI: Lid Switch [LID0]
[ 0.621273] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 0.621275] ACPI: Power Button [PWRB]
[ 0.622178] ACPI: SSDT bfd1aca0 00223 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.622795] ACPI: SSDT bfd19620 005A3 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.625156] Monitor-Mwait will be used to enter C-1 state
[ 0.625180] Monitor-Mwait will be used to enter C-2 state
[ 0.625235] Monitor-Mwait will be used to enter C-3 state
[ 0.625266] Marking TSC unstable due to TSC halts in idle
[ 0.625348] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 0.625372] processor LNXCPU:00: registered as cooling_device0
[ 0.625862] ACPI: SSDT bfd1aa20 001CF (v01 PmRef ApIst 00003000 INTL 20050624)
[ 0.626261] ACPI: SSDT bfd1af20 0008D (v01 PmRef ApCst 00003000 INTL 20050624)
[ 0.632799] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 0.632817] processor LNXCPU:01: registered as cooling_device1
[ 0.711313] isapnp: Scanning for PnP cards...
[ 0.944984] ACPI: Battery Slot [BAT1] (battery present)
[ 1.065648] isapnp: No Plug & Play device found
[ 1.066707] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.067866] brd: module loaded
[ 1.068270] loop: module loaded
[ 1.068330] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[ 1.068394] ahci 0000:00:1f.2: version 3.0
[ 1.068406] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.068435] alloc irq_desc for 29 on node -1
[ 1.068437] alloc kstat_irqs on node -1
[ 1.068447] ahci 0000:00:1f.2: irq 29 for MSI/MSI-X
[ 1.068525] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[ 1.068528] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pmp pio slum part
[ 1.068533] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.068783] scsi0 : ahci
[ 1.068861] scsi1 : ahci
[ 1.068918] scsi2 : ahci
[ 1.068974] scsi3 : ahci
[ 1.069037] scsi4 : ahci
[ 1.069099] scsi5 : ahci
[ 1.069138] ata1: SATA max UDMA/133 abar m2048@0xf2504000 port 0xf2504100 irq 29
[ 1.069141] ata2: SATA max UDMA/133 abar m2048@0xf2504000 port 0xf2504180 irq 29
[ 1.069143] ata3: DUMMY
[ 1.069145] ata4: DUMMY
[ 1.069148] ata5: SATA max UDMA/133 abar m2048@0xf2504000 port 0xf2504300 irq 29
[ 1.069151] ata6: SATA max UDMA/133 abar m2048@0xf2504000 port 0xf2504380 irq 29
[ 1.070018] Fixed MDIO Bus: probed
[ 1.070050] PPP generic driver version 2.4.2
[ 1.070122] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.070139] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 1.070149] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.070152] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.070192] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.074111] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.074117] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 1.074130] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xf2504800
[ 1.088017] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.088088] usb usb1: configuration #1 chosen from 1 choice
[ 1.088115] hub 1-0:1.0: USB hub found
[ 1.088122] hub 1-0:1.0: 6 ports detected
[ 1.088178] alloc irq_desc for 23 on node -1
[ 1.088180] alloc kstat_irqs on node -1
[ 1.088185] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.088194] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.088197] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.088229] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.092145] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.092151] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.092163] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf2504c00
[ 1.104017] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.104070] usb usb2: configuration #1 chosen from 1 choice
[ 1.104094] hub 2-0:1.0: USB hub found
[ 1.104099] hub 2-0:1.0: 6 ports detected
[ 1.104154] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.104170] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.104187] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.104193] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.104196] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.104226] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.104258] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
[ 1.104328] usb usb3: configuration #1 chosen from 1 choice
[ 1.104352] hub 3-0:1.0: USB hub found
[ 1.104357] hub 3-0:1.0: 2 ports detected
[ 1.104402] alloc irq_desc for 21 on node -1
[ 1.104404] alloc kstat_irqs on node -1
[ 1.104408] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.104414] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.104417] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.104445] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.104476] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
[ 1.104546] usb usb4: configuration #1 chosen from 1 choice
[ 1.104569] hub 4-0:1.0: USB hub found
[ 1.104575] hub 4-0:1.0: 2 ports detected
[ 1.104621] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 1.104628] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 1.104631] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.104658] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 1.104683] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001840
[ 1.104750] usb usb5: configuration #1 chosen from 1 choice
[ 1.104774] hub 5-0:1.0: USB hub found
[ 1.104779] hub 5-0:1.0: 2 ports detected
[ 1.104822] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.104828] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.104831] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.104859] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 1.104884] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
[ 1.104953] usb usb6: configuration #1 chosen from 1 choice
[ 1.104976] hub 6-0:1.0: USB hub found
[ 1.104981] hub 6-0:1.0: 2 ports detected
[ 1.105033] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.105041] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.105044] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.105070] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 1.105094] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880
[ 1.105162] usb usb7: configuration #1 chosen from 1 choice
[ 1.105185] hub 7-0:1.0: USB hub found
[ 1.105191] hub 7-0:1.0: 2 ports detected
[ 1.105241] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.105247] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.105250] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.105276] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 1.105308] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
[ 1.105381] usb usb8: configuration #1 chosen from 1 choice
[ 1.105404] hub 8-0:1.0: USB hub found
[ 1.105410] hub 8-0:1.0: 2 ports detected
[ 1.105494] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.150580] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.150585] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.150631] mice: PS/2 mouse device common for all mice
[ 1.150726] rtc_cmos 00:05: RTC can wake from S4
[ 1.150752] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.150782] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.150867] device-mapper: uevent: version 1.0.3
[ 1.151271] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised:
dm-devel@redhat.com
[ 1.151348] device-mapper: multipath: version 1.1.0 loaded
[ 1.151350] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.151454] EISA: Probing bus 0 at eisa.0
[ 1.151460] Cannot allocate resource for EISA slot 1
[ 1.151462] Cannot allocate resource for EISA slot 2
[ 1.151464] Cannot allocate resource for EISA slot 3
[ 1.151466] Cannot allocate resource for EISA slot 4
[ 1.151483] EISA: Detected 0 cards.
[ 1.151624] cpuidle: using governor ladder
[ 1.151732] cpuidle: using governor menu
[ 1.152171] TCP cubic registered
[ 1.152313] NET: Registered protocol family 10
[ 1.152715] lo: Disabled Privacy Extensions
[ 1.153027] NET: Registered protocol family 17
[ 1.153042] Bluetooth: L2CAP ver 2.13
[ 1.153043] Bluetooth: L2CAP socket layer initialized
[ 1.153046] Bluetooth: SCO (Voice Link) ver 0.6
[ 1.153048] Bluetooth: SCO socket layer initialized
[ 1.153079] Bluetooth: RFCOMM TTY layer initialized
[ 1.153082] Bluetooth: RFCOMM socket layer initialized
[ 1.153083] Bluetooth: RFCOMM ver 1.11
[ 1.153668] Using IPI No-Shortcut mode
[ 1.153723] PM: Resume from disk failed.
[ 1.153732] registered taskstats version 1
[ 1.153849] Magic number: 5:977:586
[ 1.153924] rtc_cmos 00:05: setting system clock to 2009-12-19 14:34:41 UTC (1261233281)
[ 1.153927] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.153929] EDD information not available.
[ 1.184946] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.396143] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.396183] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.400133] usb 1-6: new high speed USB device using ehci_hcd and address 2
[ 1.500086] Clocksource tsc unstable (delta = -263502944 ns)
[ 1.546246] usb 1-6: configuration #1 chosen from 1 choice
[ 1.552043] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.560050] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.561394] ata5.00: ATAPI: MATSHITADVD-RAM UJ880AS, 1.50, max UDMA/33
[ 1.563263] ata5.00: configured for UDMA/33
[ 1.623390] ata1.00: ATA-8: TOSHIBA MK3252GSX, LV010M, max UDMA/100
[ 1.623394] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.624343] ata1.00: configured for UDMA/100
[ 1.624437] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK3252GS LV01 PQ: 0 ANSI: 5
[ 1.624544] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.624578] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.624619] sd 0:0:0:0: [sda] Write Protect is off
[ 1.624622] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.624644] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.624751] sda:
[ 1.626268] scsi 4:0:0:0: CD-ROM MATSHITA DVD-RAM UJ880AS 1.50 PQ: 0 ANSI: 5
[ 1.627748] sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.627751] Uniform CD-ROM driver Revision: 3.20
[ 1.627832] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 1.627878] sr 4:0:0:0: Attached scsi generic sg1 type 5
[ 1.673178] sda1 sda2 < sda5 sda6 sda7 > sda3
[ 1.715320] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.715363] Freeing unused kernel memory: 544k freed
[ 1.715644] Write protecting the kernel text: 4592k
[ 1.715728] Write protecting the kernel read-only data: 1836k
[ 1.817330] Linux agpgart interface v0.103
[ 1.848798] acpi device:05: registered as cooling_device2
[ 1.848992] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/device:03/input/input5
[ 1.849040] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 1.870057] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.870078] r8169 0000:0e:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.870126] r8169 0000:0e:00.0: setting latency timer to 64
[ 1.870184] alloc irq_desc for 30 on node -1
[ 1.870186] alloc kstat_irqs on node -1
[ 1.870202] r8169 0000:0e:00.0: irq 30 for MSI/MSI-X
[ 1.870777] eth0: RTL8102e at 0xf8316000, 00:23:5a:06:7a:2b, XID 34a00000 IRQ 30
[ 1.886323] usb 6-2: new low speed USB device using uhci_hcd and address 2
[ 1.907981] ohci1394 0000:20:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.907990] ohci1394 0000:20:00.0: setting latency timer to 64
[ 1.966082] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[f2200000-f22007ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 2.058025] usb 6-2: configuration #1 chosen from 1 choice
[ 2.065784] usbcore: registered new interface driver hiddev
[ 2.078147] input: PS/2+USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input6
[ 2.078213] generic-usb 0003:04F3:0210.0001: input,hidraw0: USB HID v1.11 Mouse [PS/2+USB Mouse] on usb-0000:00:1d.0-2/input0
[ 2.078226] usbcore: registered new interface driver usbhid
[ 2.078229] usbhid: v2.6:USB HID core driver
[ 2.670019] xor: automatically using best checksumming function: pIII_sse
[ 2.688008] pIII_sse : 7872.000 MB/sec
[ 2.688010] xor: using function: pIII_sse (7872.000 MB/sec)
[ 2.690183] device-mapper: dm-raid45: initialized v0.2594b
[ 3.052885] PM: Starting manual resume from disk
[ 3.052889] PM: Resume from partition 8:5
[ 3.052891] PM: Checking hibernation image.
[ 3.053034] PM: Resume from disk failed.
[ 3.065977] EXT4-fs (sda6): barriers enabled
[ 3.094104] kjournald2 starting: pid 442, dev sda6:8, commit interval 5 seconds
[ 3.094115] EXT4-fs (sda6): delayed allocation enabled
[ 3.094119] EXT4-fs: file extents enabled
[ 3.094417] EXT4-fs: mballoc enabled
[ 3.094428] EXT4-fs (sda6): mounted filesystem with ordered data mode
[ 3.244332] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f92e0415085]
[ 3.676104] type=1505 audit(1261233284.022:2): operation="profile_load" pid=469 name=/usr/share/gdm/guest-session/Xsession
[ 3.705772] type=1505 audit(1261233284.051:3): operation="profile_load" pid=470 name=/sbin/dhclient3
[ 3.706462] type=1505 audit(1261233284.051:4): operation="profile_load" pid=470 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 3.706829] type=1505 audit(1261233284.051:5): operation="profile_load" pid=470 name=/usr/lib/connman/scripts/dhclient-script
[ 3.747886] type=1505 audit(1261233284.091:6): operation="profile_load" pid=471 name=/usr/bin/evince
[ 3.758750] type=1505 audit(1261233284.103:7): operation="profile_load" pid=471 name=/usr/bin/evince-previewer
[ 3.765176] type=1505 audit(1261233284.111:8): operation="profile_load" pid=471 name=/usr/bin/evince-thumbnailer
[ 3.773957] type=1505 audit(1261233284.119:9): operation="profile_load" pid=473 name=/usr/bin/virt-aa-helper
[ 14.048562] Adding 3148732k swap on /dev/sda5. Priority:-1 extents:1 across:3148732k
[ 14.055149] udev: starting version 147
[ 14.073206] lp: driver loaded but no devices found
[ 14.243171] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 14.243178] Disabling lock debugging due to kernel taint
[ 14.255080] EXT4-fs (sda6): internal journal on sda6:8
[ 14.309327] sdhci: Secure Digital Host Controller Interface driver
[ 14.309330] sdhci: Copyright(c) Pierre Ossman
[ 14.310495] sdhci-pci 0000:20:00.1: SDHCI controller found [197b:2382] (rev 0)
[ 14.310515] sdhci-pci 0000:20:00.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 14.310561] sdhci-pci 0000:20:00.1: setting latency timer to 64
[ 14.310595] Registered led device: mmc0::
[ 14.310627] mmc0: SDHCI controller on PCI [0000:20:00.1] using DMA
[ 14.310638] sdhci-pci 0000:20:00.2: SDHCI controller found [197b:2381] (rev 0)
[ 14.310654] sdhci-pci 0000:20:00.2: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 14.310660] sdhci-pci 0000:20:00.2: Refusing to bind to secondary interface.
[ 14.310668] sdhci-pci 0000:20:00.2: PCI INT A disabled
[ 14.333812] alloc irq_desc for 22 on node -1
[ 14.333815] alloc kstat_irqs on node -1
[ 14.333822] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 14.333826] hda_intel: probe_mask set to 0x3 for device 1179:ff00
[ 14.333859] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 14.350333] [fglrx] Maximum main memory to use for locked dma buffers: 3854 MBytes.
[ 14.350657] [fglrx] vendor: 1002 device: 95c4 count: 1
[ 14.351151] [fglrx] ioport: bar 1, base 0x2000, size: 0x100
[ 14.351171] pci 0000:01:00.0: power state changed by ACPI to D0
[ 14.351180] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 14.351185] pci 0000:01:00.0: setting latency timer to 64
[ 14.351390] [fglrx] Kernel PAT support is enabled
[ 14.351410] [fglrx] module loaded - fglrx 8.66.10 [Sep 3 2009] with 1 minors
[ 14.353727] jmb38x_ms 0000:20:00.3: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 14.353735] jmb38x_ms 0000:20:00.3: setting latency timer to 64
[ 14.368977] Linux video capture interface: v2.00
[ 14.371661] uvcvideo: Found UVC 1.00 device Chicony USB 2.0 Camera (04f2:b008)
[ 14.375517] input: Chicony USB 2.0 Camera as /devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input7
[ 14.375565] usbcore: registered new interface driver uvcvideo
[ 14.375569] USB Video Class driver (v0.1.0)
[ 14.392376] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 14.409926] cfg80211: Calling CRDA to update world regulatory domain
[ 14.449234] cfg80211: World regulatory domain updated:
[ 14.449237] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 14.449239] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 14.449242] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 14.449244] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 14.449247] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 14.449249] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 14.450175] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27k
[ 14.450178] iwlagn: Copyright(c) 2003-2009 Intel Corporation
[ 14.450243] iwlagn 0000:14:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 14.450253] iwlagn 0000:14:00.0: setting latency timer to 64
[ 14.450284] iwlagn 0000:14:00.0: Detected Intel Wireless WiFi Link 5100AGN REV=0x54
[ 14.472137] hda_codec: Unknown model for ALC272, trying auto-probe from BIOS...
[ 14.473048] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
[ 14.491863] iwlagn 0000:14:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
[ 14.491926] alloc irq_desc for 31 on node -1
[ 14.491928] alloc kstat_irqs on node -1
[ 14.491947] iwlagn 0000:14:00.0: irq 31 for MSI/MSI-X
[ 14.499815] phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 14.526285] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 14.526312] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 14.651191] EXT4-fs (sda7): barriers enabled
[ 14.652349] kjournald2 starting: pid 946, dev sda7:8, commit interval 5 seconds
[ 14.652528] EXT4-fs (sda7): internal journal on sda7:8
[ 14.652533] EXT4-fs (sda7): delayed allocation enabled
[ 14.652537] EXT4-fs: file extents enabled
[ 14.652589] EXT4-fs: mballoc enabled
[ 14.652605] EXT4-fs (sda7): mounted filesystem with ordered data mode
[ 14.751014] psmouse serio1: ID: 73 02 0a
[ 14.923298] __ratelimit: 15 callbacks suppressed
[ 14.923301] type=1505 audit(1261229695.267:15): operation="profile_replace" pid=1155 name=/usr/share/gdm/guest-session/Xsession
[ 14.924903] type=1505 audit(1261229695.267:16): operation="profile_replace" pid=1156 name=/sbin/dhclient3
[ 14.925635] type=1505 audit(1261229695.271:17): operation="profile_replace" pid=1156 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 14.926005] type=1505 audit(1261229695.271:18): operation="profile_replace" pid=1156 name=/usr/lib/connman/scripts/dhclient-script
[ 14.926898] r8169: eth0: link down
[ 14.927079] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 14.933857] type=1505 audit(1261229695.279:19): operation="profile_replace" pid=1157 name=/usr/bin/evince
[ 14.937321] iwlagn 0000:14:00.0: firmware: requesting iwlwifi-5000-2.ucode
[ 14.944856] type=1505 audit(1261229695.287:20): operation="profile_replace" pid=1157 name=/usr/bin/evince-previewer
[ 14.955302] type=1505 audit(1261229695.298:21): operation="profile_replace" pid=1157 name=/usr/bin/evince-thumbnailer
[ 14.963903] type=1505 audit(1261229695.307:22): operation="profile_replace" pid=1163 name=/usr/bin/virt-aa-helper
[ 14.965437] type=1505 audit(1261229695.311:23): operation="profile_replace" pid=1164 name=/usr/lib/cups/backend/cups-pdf
[ 14.966238] type=1505 audit(1261229695.311:24): operation="profile_replace" pid=1164 name=/usr/sbin/cupsd
[ 15.008375] iwlagn 0000:14:00.0: loaded firmware version 8.24.2.12
[ 15.157298] Registered led device: iwl-phy0::radio
[ 15.157317] Registered led device: iwl-phy0::assoc
[ 15.157333] Registered led device: iwl-phy0::RX
[ 15.157349] Registered led device: iwl-phy0::TX
[ 15.173641] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 15.657705] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input9
[ 15.846678] Bridge firewalling registered
[ 15.856645] virbr0: starting userspace STP failed, starting kernel STP
[ 15.886716] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 15.886906] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[ 15.886909] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
[ 15.886911] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 16.005150] ppdev: user-space parallel port driver
[ 16.026839] lo: Disabled Privacy Extensions
[ 17.829991] alloc irq_desc for 32 on node -1
[ 17.829994] alloc kstat_irqs on node -1
[ 17.830007] fglrx_pci 0000:01:00.0: irq 32 for MSI/MSI-X
[ 17.830566] [fglrx] Firegl kernel thread PID: 1935
[ 18.325259] [fglrx] Gart USWC size:1254 M.
[ 18.325263] [fglrx] Gart cacheable size:498 M.
[ 18.325268] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 18.325270] [fglrx] Reserved FB block: Unshared offset:fc0c000, size:3ef000
[ 18.325273] [fglrx] Reserved FB block: Unshared offset:fffb000, size:5000
[ 18.858412] [fglrx:fireglAsyncioIntEnableMsgHandler] *ERROR* interrupt source ff000066 is not supported on this hardware (return code = 1)
[ 21.437121] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[ 39.234908] padlock: VIA PadLock not detected.
[ 51.371468] wlan0: authenticate with AP 00:16:41:02:18:ea
[ 51.373506] wlan0: authenticated
[ 51.373509] wlan0: associate with AP 00:16:41:02:18:ea
[ 51.376364] wlan0: RX AssocResp from 00:16:41:02:18:ea (capab=0x411 status=0 aid=1)
[ 51.376367] wlan0: associated
[ 51.379265] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 62.077023] wlan0: no IPv6 routers present
[ 76.036088] CE: hpet increasing min_delta_ns to 15000 nsec
[ 76.036196] CE: hpet increasing min_delta_ns to 22500 nsec
[ 251.809335] CE: hpet increasing min_delta_ns to 33750 nsec
[ 2786.978251] [fglrx:fireglAsyncioIntEnableMsgHandler] *ERROR* interrupt source ff000066 is not supported on this hardware (return code = 1)
[ 3003.569862] [fglrx:fireglAsyncioIntEnableMsgHandler] *ERROR* interrupt source ff000066 is not supported on this hardware (return code = 1)
--------------------------------------------------------------------
Voila ! J'ai dû augmenter le cache pour obtenir l'intégralité (donc >512).
Maintenant, comment l'interpréter ?
