florian@florian-desktop:~$ dmesg | tail -70
[ 4.909453] type=1505 audit(1009843229.274:3): operation="profile_load" pid=349 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 4.909752] type=1505 audit(1009843229.274:4): operation="profile_load" pid=349 name=/usr/lib/connman/scripts/dhclient-script
[ 4.974883] type=1505 audit(1009843229.338:5): operation="profile_load" pid=351 name=/usr/lib/cups/backend/cups-pdf
[ 4.975546] type=1505 audit(1009843229.338:6): operation="profile_load" pid=351 name=/usr/sbin/cupsd
[ 4.999911] type=1505 audit(1009843229.362:7): operation="profile_load" pid=352 name=/usr/sbin/mysqld-akonadi
[ 5.019140] type=1505 audit(1009843229.382:8): operation="profile_load" pid=353 name=/usr/sbin/tcpdump
[ 23.399164] Adding 2433808k swap on /dev/sda5. Priority:-1 extents:1 across:2433808k
[ 23.415446] udev: starting version 147
[ 23.631927] lp: driver loaded but no devices found
[ 23.695816] EXT3 FS on sda1, internal journal
[ 24.264432] parport_pc 00:0a: reported by Plug and Play ACPI
[ 24.264502] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 24.289275] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 24.358367] lp0: using parport0 (interrupt-driven).
[ 24.584395] cfg80211: Calling CRDA to update world regulatory domain
[ 24.637385] cfg80211: World regulatory domain updated:
[ 24.637397] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 24.637404] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 24.637409] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 24.637415] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 24.637420] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 24.637425] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 24.674901] ppdev: user-space parallel port driver
[ 24.783816] gameport: NS558 PnP Gameport is pnp00:0c/gameport0, io 0x200, speed 59659kHz
[ 24.791224] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 24.849317] usb 1-2: reset full speed USB device using ohci_hcd and address 3
[ 24.950908] ACPI: PCI Interrupt Link [LACI] enabled at IRQ 21
[ 24.950924] Intel ICH 0000:00:06.0: PCI INT A -> Link[LACI] -> GSI 21 (level, high) -> IRQ 21
[ 24.950992] Intel ICH 0000:00:06.0: setting latency timer to 64
[ 25.197138] phy0: Selected rate control algorithm 'minstrel'
[ 25.198361] zd1211rw 1-2:1.0: phy0
[ 25.198419] usbcore: registered new interface driver zd1211rw
[ 25.524086] intel8x0_measure_ac97_clock: measured 55170 usecs (2680 samples)
[ 25.524095] intel8x0: clocking to 47429
[ 25.658867] usb 1-2: firmware: requesting zd1211/zd1211b_ub
[ 25.709177] usb 1-2: firmware: requesting zd1211/zd1211b_uphr
[ 26.027639] type=1505 audit(1009843250.390:9): operation="profile_replace" pid=895 name=/sbin/dhclient3
[ 26.030085] type=1505 audit(1009843250.394:10): operation="profile_replace" pid=895 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 26.030396] type=1505 audit(1009843250.394:11): operation="profile_replace" pid=895 name=/usr/lib/connman/scripts/dhclient-script
[ 26.052346] type=1505 audit(1009843250.418:12): operation="profile_replace" pid=897 name=/usr/lib/cups/backend/cups-pdf
[ 26.053009] type=1505 audit(1009843250.418:13): operation="profile_replace" pid=897 name=/usr/sbin/cupsd
[ 26.082461] type=1505 audit(1009843250.446:14): operation="profile_replace" pid=902 name=/usr/sbin/mysqld-akonadi
[ 26.087252] type=1505 audit(1009843250.450:15): operation="profile_replace" pid=903 name=/usr/sbin/tcpdump
[ 26.260161] zd1211rw 1-2:1.0: firmware version 4725
[ 26.398950] zd1211rw 1-2:1.0: zd1211b chip 050d:705c v4810 full 00-1c-df AL2230_RF pa0 g--NS
[ 26.412140] cfg80211: Calling CRDA for country: US
[ 26.417038] cfg80211: Regulatory domain changed to country: US
[ 26.417049] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 26.417055] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 26.417061] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 26.417066] (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 26.417071] (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 26.417076] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 26.644590] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 26.659991] eth0: no link during initialization.
[ 26.660919] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 139.568523] type=1503 audit(1009843363.934:16): operation="open" pid=1475 parent=1473 profile="/usr/sbin/mysqld-akonadi" requested_mask="::r" denied_mask="::r" fsuid=1000 ouid=0 name="/sys/devices/system/cpu/"
[ 139.983006] type=1503 audit(1009843364.346:17): operation="open" pid=1484 parent=1482 profile="/usr/sbin/mysqld-akonadi" requested_mask="::r" denied_mask="::r" fsuid=1000 ouid=0 name="/sys/devices/system/cpu/"
[ 140.566208] type=1503 audit(1009843364.930:18): operation="open" pid=1496 parent=1494 profile="/usr/sbin/mysqld-akonadi" requested_mask="::r" denied_mask="::r" fsuid=1000 ouid=0 name="/sys/devices/system/cpu/"
[ 141.397825] type=1503 audit(1009843365.762:19): operation="open" pid=1512 parent=1507 profile="/usr/sbin/mysqld-akonadi" requested_mask="::r" denied_mask="::r" fsuid=1000 ouid=0 name="/sys/devices/system/cpu/"
[ 149.558522] type=1503 audit(1009843373.922:20): operation="open" pid=1552 parent=1468 profile="/usr/sbin/mysqld-akonadi" requested_mask="::r" denied_mask="::r" fsuid=1000 ouid=0 name="/sys/devices/system/cpu/"
[ 149.592855] type=1503 audit(1009843373.958:21): operation="open" pid=1552 parent=1468 profile="/usr/sbin/mysqld-akonadi" requested_mask="::r" denied_mask="::r" fsuid=1000 ouid=0 name="/etc/mysql/my.cnf"
[ 176.047315] wlan0: direct probe to AP 5e:19:83:c3:e5:a0 try 1
[ 176.075296] wlan0 direct probe responded
[ 176.075305] wlan0: authenticate with AP 5e:19:83:c3:e5:a0
[ 176.176245] wlan0: authenticated
[ 176.176259] wlan0: associate with AP 5e:19:83:c3:e5:a0
[ 176.279154] wlan0: RX AssocResp from 5e:19:83:c3:e5:a0 (capab=0x411 status=0 aid=1)
[ 176.279165] wlan0: associated
[ 176.280964] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
florian@florian-desktop:~$ sudo fdisk -1
[sudo] password for florian:
fdisk: option invalide -- '1'
Utilisation : fdisk [-b TAILLE] [-u] DISQUE modifier la table de partitions
fdisk -l [-b TAILLE] [-u] DISQUE lister les tables de partitions
fdisk -s PARTITION donner la taille de partition en blocs
fdisk -v afficher la version de fdisk
Où DISQUE est quelque chose du genre: /dev/hdb ou /dev/sda
et PARTITION est quelque chose du genre: /dev/hda7
-u: donne le Début et la Fin en unités de secteurs (au lieu de cylindres)
-b 2048: (pour certains disques optiques) spécifie 2048 octets par secteur
florian@florian-desktop:~$ cat /etc/fstab
# /etc/fstab: static file system information.
#
# Use 'vol_id --uuid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# / was on /dev/sda1 during installation
UUID=805f93f9-7bc8-4ee7-a6a3-b121efa1133f / ext3 relatime,errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=8d96b214-011b-4e6e-9c9d-954c4d2e4a13 none swap sw 0 0
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0
florian@florian-desktop:~$ sudo belkid
sudo: belkid: command not found
