[ 0.000000] BIOS EBDA/lowmem at: 0009f800/0009f800
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.28-14-generic (buildd@palmer) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #47-Ubuntu SMP Sat Jul 25 00:28:35 UTC 2009 (Ubuntu 2.6.28-14.47-generic)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
[ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.3 present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working it around.
[ 0.000000] last_pfn = 0x3fff0 max_arch_pfn = 0x100000
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009f800 (usable)
[ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000003fff0000 (usable)
[ 0.000000] modified: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
[ 0.000000] modified: 000000003fff3000 - 0000000040000000 (ACPI data)
[ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000
[ 0.000000] RAMDISK: 378bb000 - 37fef2c6
[ 0.000000] Allocated new RAMDISK: 0087b000 - 00faf2c6
[ 0.000000] Move RAMDISK from 00000000378bb000 - 0000000037fef2c5 to 0087b000 - 00faf2c5
[ 0.000000] ACPI: RSDP 000F76F0, 0014 (r0 Nvidia)
[ 0.000000] ACPI: RSDT 3FFF3040, 0030 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: FACP 3FFF30C0, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: DSDT 3FFF3180, 6264 (r1 NVIDIA AWRDACPI 1000 MSFT 100000E)
[ 0.000000] ACPI: FACS 3FFF0000, 0040
[ 0.000000] ACPI: SRAT 3FFF9500, 0090 (r1 AMD HAMMER 1 AMD 1)
[ 0.000000] ACPI: MCFG 3FFF9600, 003C (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
[ 0.000000] 139MB HIGHMEM available.
[ 0.000000] 883MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 373fe000
[ 0.000000] low ram: 00000000 - 373fe000
[ 0.000000] bootmap 00012000 - 00018e80
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008760ac] TEXT DATA BSS ==> [0000100000 - 00008760ac]
[ 0.000000] #4 [0000877000 - 000087b000] INIT_PG_TABLE ==> [0000877000 - 000087b000]
[ 0.000000] #5 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
[ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
[ 0.000000] #7 [000087b000 - 0000faf2c6] NEW RAMDISK ==> [000087b000 - 0000faf2c6]
[ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000373fe
[ 0.000000] HighMem 0x000373fe -> 0x0003fff0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003fff0
[ 0.000000] On node 0 totalpages: 262015
[ 0.000000] free_area_init_node: node 0, pgdat c06ca500, node_mem_map c1000200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1736 pages used for memmap
[ 0.000000] Normal zone: 220470 pages, LIFO batch:31
[ 0.000000] HighMem zone: 280 pages used for memmap
[ 0.000000] HighMem zone: 35546 pages, LIFO batch:7
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] Found and enabled local APIC!
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
[ 0.000000] PERCPU: Allocating 45056 bytes of per cpu data
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 1, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259967
[ 0.000000] Kernel command line: root=UUID=2e9c0572-fdf8-43f1-b66c-d99ecf4a9bc2 ro quiet splash
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2100.214 MHz processor.
[ 0.004000] spurious 8259A interrupt: IRQ7.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] allocated 5242240 bytes of page_cgroup
[ 0.004000] please try cgroup_disable=memory option if you don't want
[ 0.004000] Scanning for low memory corruption every 60 seconds
[ 0.004000] Memory: 1018524k/1048512k available (4115k kernel code, 29236k reserved, 2196k data, 532k init, 143304k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB)
[ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.004000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
[ 0.004000] .init : 0xc0731000 - 0xc07b6000 ( 532 kB)
[ 0.004000] .data : 0xc0504def - 0xc0729e60 (2196 kB)
[ 0.004000] .text : 0xc0100000 - 0xc0504def (4115 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.004011] Calibrating delay loop (skipped), value calculated using timer frequency.. 4200.42 BogoMIPS (lpj=8400856)
[ 0.004032] Security Framework initialized
[ 0.004040] SELinux: Disabled at boot.
[ 0.004066] AppArmor: AppArmor initialized
[ 0.004074] Mount-cache hash table entries: 512
[ 0.004215] Initializing cgroup subsys ns
[ 0.004219] Initializing cgroup subsys cpuacct
[ 0.004221] Initializing cgroup subsys memory
[ 0.004226] Initializing cgroup subsys freezer
[ 0.004239] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004241] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.004256] Checking 'hlt' instruction... OK.
[ 0.020566] SMP alternatives: switching to UP code
[ 0.128464] Freeing SMP alternatives: 18k freed
[ 0.128468] ACPI: Core revision 20080926
[ 0.130694] ACPI: Checking initramfs for custom DSDT
[ 0.399245] ACPI: setting ELCR to 0200 (from 0828)
[ 0.400053] weird, boot CPU (#0) not listedby the BIOS.
[ 0.400054] SMP motherboard not detected.
[ 0.404001] SMP disabled
[ 0.404001] Brought up 1 CPUs
[ 0.404001] Total of 1 processors activated (4200.42 BogoMIPS).
[ 0.404001] CPU0 attaching NULL sched-domain.
[ 0.404001] net_namespace: 776 bytes
[ 0.404001] Booting paravirtualized kernel on bare hardware
[ 0.404001] Time: 21:22:14 Date: 01/05/10
[ 0.404001] regulator: core version 0.5
[ 0.404001] NET: Registered protocol family 16
[ 0.404001] EISA bus registered
[ 0.404001] ACPI: bus type pci registered
[ 0.404001] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.404001] PCI: MCFG area at e0000000 reserved in E820
[ 0.404001] PCI: Using MMCONFIG for extended config space
[ 0.404001] PCI: Using configuration type 1 for base access
[ 0.404001] ACPI: EC: Look up EC in DSDT
[ 0.411268] ACPI: Interpreter enabled
[ 0.411272] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.411293] ACPI: Using PIC for interrupt routing
[ 0.419675] ACPI: No dock devices found.
[ 0.419689] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.419771] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.419784] pci 0000:00:01.1: reg 10 io port: [0xdc00-0xdc1f]
[ 0.419792] pci 0000:00:01.1: reg 20 io port: [0x4c00-0x4c3f]
[ 0.419796] pci 0000:00:01.1: reg 24 io port: [0x4c40-0x4c7f]
[ 0.419802] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.419805] pci 0000:00:01.1: PME# disabled
[ 0.419823] pci 0000:00:02.0: reg 10 32bit mmio: [0xd0103000-0xd0103fff]
[ 0.419836] pci 0000:00:02.0: supports D1 D2
[ 0.419838] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.419841] pci 0000:00:02.0: PME# disabled
[ 0.419856] pci 0000:00:02.1: reg 10 32bit mmio: [0xfeb00000-0xfeb000ff]
[ 0.419871] pci 0000:00:02.1: supports D1 D2
[ 0.419872] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.419875] pci 0000:00:02.1: PME# disabled
[ 0.419900] pci 0000:00:06.0: reg 20 io port: [0xf000-0xf00f]
[ 0.419918] pci 0000:00:07.0: reg 10 io port: [0x9f0-0x9f7]
[ 0.419921] pci 0000:00:07.0: reg 14 io port: [0xbf0-0xbf3]
[ 0.419925] pci 0000:00:07.0: reg 18 io port: [0x970-0x977]
[ 0.419928] pci 0000:00:07.0: reg 1c io port: [0xb70-0xb73]
[ 0.419931] pci 0000:00:07.0: reg 20 io port: [0xd800-0xd80f]
[ 0.419935] pci 0000:00:07.0: reg 24 32bit mmio: [0xd0102000-0xd0102fff]
[ 0.419951] pci 0000:00:08.0: reg 10 io port: [0x9e0-0x9e7]
[ 0.419955] pci 0000:00:08.0: reg 14 io port: [0xbe0-0xbe3]
[ 0.419958] pci 0000:00:08.0: reg 18 io port: [0x960-0x967]
[ 0.419961] pci 0000:00:08.0: reg 1c io port: [0xb60-0xb63]
[ 0.419965] pci 0000:00:08.0: reg 20 io port: [0xc400-0xc40f]
[ 0.419968] pci 0000:00:08.0: reg 24 32bit mmio: [0xd0101000-0xd0101fff]
[ 0.419993] pci 0000:00:0a.0: reg 10 32bit mmio: [0xd0100000-0xd0100fff]
[ 0.420004] pci 0000:00:0a.0: reg 14 io port: [0xb000-0xb007]
[ 0.420015] pci 0000:00:0a.0: supports D1 D2
[ 0.420017] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.420020] pci 0000:00:0a.0: PME# disabled
[ 0.420039] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.420041] pci 0000:00:0b.0: PME# disabled
[ 0.420062] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.420064] pci 0000:00:0c.0: PME# disabled
[ 0.420083] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.420086] pci 0000:00:0d.0: PME# disabled
[ 0.420104] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.420107] pci 0000:00:0e.0: PME# disabled
[ 0.420193] pci 0000:05:07.0: reg 10 io port: [0xa000-0xa0ff]
[ 0.420197] pci 0000:05:07.0: reg 14 32bit mmio: [0xd0000000-0xd0000fff]
[ 0.420216] pci 0000:05:07.0: supports D1 D2
[ 0.420237] pci 0000:00:09.0: transparent bridge
[ 0.420240] pci 0000:00:09.0: bridge io port: [0xa000-0xafff]
[ 0.420243] pci 0000:00:09.0: bridge 32bit mmio: [0xd0000000-0xd00fffff]
[ 0.420347] pci 0000:01:00.0: reg 10 32bit mmio: [0xc8000000-0xcbffffff]
[ 0.420354] pci 0000:01:00.0: reg 14 64bit mmio: [0xc0000000-0xc7ffffff]
[ 0.420360] pci 0000:01:00.0: reg 1c 64bit mmio: [0xcc000000-0xccffffff]
[ 0.420367] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.420402] pci 0000:00:0e.0: bridge 32bit mmio: [0xc8000000-0xcfffffff]
[ 0.420405] pci 0000:00:0e.0: bridge 64bit mmio pref: [0xc0000000-0xc7ffffff]
[ 0.420414] bus 00 -> node 0
[ 0.420421] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.420773] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.494579] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.494784] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.494987] ACPI: PCI Interrupt Link [LNK3] (IRQs *3 4 5 7 9 10 11 12 14 15)
[ 0.495189] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.495392] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.495596] ACPI: PCI Interrupt Link [LUBA] (IRQs *3 4 5 7 9 10 11 12 14 15)
[ 0.495808] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.496019] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 0.496223] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.496427] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.496631] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 0.496835] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.497038] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.497252] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.497465] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 0.497676] ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.497900] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[ 0.498119] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[ 0.498320] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[ 0.498503] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[ 0.498630] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
[ 0.498820] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
[ 0.499011] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
[ 0.499201] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
[ 0.499391] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
[ 0.499582] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
[ 0.499772] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
[ 0.499962] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
[ 0.500189] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[ 0.500422] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
[ 0.500656] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
[ 0.500890] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
[ 0.501022] ACPI: WMI: Mapper loaded
[ 0.501198] SCSI subsystem initialized
[ 0.501236] libata version 3.00 loaded.
[ 0.501282] usbcore: registered new interface driver usbfs
[ 0.501298] usbcore: registered new interface driver hub
[ 0.501320] usbcore: registered new device driver usb
[ 0.501414] PCI: Using ACPI for IRQ routing
[ 0.501485] Bluetooth: Core ver 2.13
[ 0.501485] NET: Registered protocol family 31
[ 0.501485] Bluetooth: HCI device and connection manager initialized
[ 0.501485] Bluetooth: HCI socket layer initialized
[ 0.501485] NET: Registered protocol family 8
[ 0.501485] NET: Registered protocol family 20
[ 0.501485] NetLabel: Initializing
[ 0.501485] NetLabel: domain hash size = 128
[ 0.501485] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.501485] NetLabel: unlabeled traffic allowed by default
[ 0.501485] AppArmor: AppArmor Filesystem Enabled
[ 0.501485] pnp: PnP ACPI init
[ 0.501485] ACPI: bus type pnp registered
[ 0.507322] pnp: PnP ACPI: found 15 devices
[ 0.507324] ACPI: ACPI bus type pnp unregistered
[ 0.507328] PnPBIOS: Disabled by ACPI PNP
[ 0.507336] system 00:01: ioport range 0x4000-0x407f has been reserved
[ 0.507339] system 00:01: ioport range 0x4080-0x40ff has been reserved
[ 0.507341] system 00:01: ioport range 0x4400-0x447f has been reserved
[ 0.507344] system 00:01: ioport range 0x4480-0x44ff has been reserved
[ 0.507346] system 00:01: ioport range 0x4800-0x487f has been reserved
[ 0.507349] system 00:01: ioport range 0x4880-0x48ff has been reserved
[ 0.507354] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 0.507356] system 00:02: ioport range 0x800-0x805 has been reserved
[ 0.507359] system 00:02: ioport range 0x290-0x297 has been reserved
[ 0.507366] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.507371] system 00:0e: iomem range 0xf0000-0xf3fff could not be reserved
[ 0.507374] system 00:0e: iomem range 0xf4000-0xf7fff could not be reserved
[ 0.507377] system 00:0e: iomem range 0xf8000-0xfbfff could not be reserved
[ 0.507379] system 00:0e: iomem range 0xfc000-0xfffff could not be reserved
[ 0.507382] system 00:0e: iomem range 0x3fff0000-0x3fffffff could not be reserved
[ 0.507385] system 00:0e: iomem range 0xffff0000-0xffffffff has been reserved
[ 0.507387] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
[ 0.507390] system 00:0e: iomem range 0x100000-0x3ffeffff could not be reserved
[ 0.507393] system 00:0e: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.507395] system 00:0e: iomem range 0xfee00000-0xfeefffff has been reserved
[ 0.507398] system 00:0e: iomem range 0xfefff000-0xfeffffff has been reserved
[ 0.507401] system 00:0e: iomem range 0xfff80000-0xfff80fff has been reserved
[ 0.507403] system 00:0e: iomem range 0xfff90000-0xfffbffff has been reserved
[ 0.507406] system 00:0e: iomem range 0xfffed000-0xfffeffff has been reserved
[ 0.542085] pci 0000:00:09.0: PCI bridge, secondary bus 0000:05
[ 0.542087] pci 0000:00:09.0: IO window: 0xa000-0xafff
[ 0.542091] pci 0000:00:09.0: MEM window: 0xd0000000-0xd00fffff
[ 0.542093] pci 0000:00:09.0: PREFETCH window: disabled
[ 0.542097] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:04
[ 0.542098] pci 0000:00:0b.0: IO window: disabled
[ 0.542101] pci 0000:00:0b.0: MEM window: disabled
[ 0.542103] pci 0000:00:0b.0: PREFETCH window: disabled
[ 0.542106] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:03
[ 0.542108] pci 0000:00:0c.0: IO window: disabled
[ 0.542111] pci 0000:00:0c.0: MEM window: disabled
[ 0.542113] pci 0000:00:0c.0: PREFETCH window: disabled
[ 0.542116] pci 0000:00:0d.0: PCI bridge, secondary bus 0000:02
[ 0.542118] pci 0000:00:0d.0: IO window: disabled
[ 0.542120] pci 0000:00:0d.0: MEM window: disabled
[ 0.542123] pci 0000:00:0d.0: PREFETCH window: disabled
[ 0.542128] pci 0000:00:0e.0: PCI bridge, secondary bus 0000:01
[ 0.542130] pci 0000:00:0e.0: IO window: disabled
[ 0.542133] pci 0000:00:0e.0: MEM window: 0xc8000000-0xcfffffff
[ 0.542136] pci 0000:00:0e.0: PREFETCH window: 0x000000c0000000-0x000000c7ffffff
[ 0.542144] pci 0000:00:09.0: setting latency timer to 64
[ 0.542148] pci 0000:00:0b.0: setting latency timer to 64
[ 0.542152] pci 0000:00:0c.0: setting latency timer to 64
[ 0.542157] pci 0000:00:0d.0: setting latency timer to 64
[ 0.542161] pci 0000:00:0e.0: setting latency timer to 64
[ 0.542164] bus: 00 index 0 io port: [0x00-0xffff]
[ 0.542166] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[ 0.542168] bus: 05 index 0 io port: [0xa000-0xafff]
[ 0.542170] bus: 05 index 1 mmio: [0xd0000000-0xd00fffff]
[ 0.542172] bus: 05 index 2 mmio: [0x0-0x0]
[ 0.542173] bus: 05 index 3 io port: [0x00-0xffff]
[ 0.542175] bus: 05 index 4 mmio: [0x000000-0xffffffff]
[ 0.542177] bus: 04 index 0 mmio: [0x0-0x0]
[ 0.542179] bus: 04 index 1 mmio: [0x0-0x0]
[ 0.542180] bus: 04 index 2 mmio: [0x0-0x0]
[ 0.542182] bus: 04 index 3 mmio: [0x0-0x0]
[ 0.542184] bus: 03 index 0 mmio: [0x0-0x0]
[ 0.542185] bus: 03 index 1 mmio: [0x0-0x0]
[ 0.542187] bus: 03 index 2 mmio: [0x0-0x0]
[ 0.542189] bus: 03 index 3 mmio: [0x0-0x0]
[ 0.542190] bus: 02 index 0 mmio: [0x0-0x0]
[ 0.542192] bus: 02 index 1 mmio: [0x0-0x0]
[ 0.542194] bus: 02 index 2 mmio: [0x0-0x0]
[ 0.542195] bus: 02 index 3 mmio: [0x0-0x0]
[ 0.542197] bus: 01 index 0 mmio: [0x0-0x0]
[ 0.542199] bus: 01 index 1 mmio: [0xc8000000-0xcfffffff]
[ 0.542201] bus: 01 index 2 mmio: [0xc0000000-0xc7ffffff]
[ 0.542203] bus: 01 index 3 mmio: [0x0-0x0]
[ 0.542213] NET: Registered protocol family 2
[ 0.542310] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.542626] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.543649] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.544229] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.544233] TCP reno registered
[ 0.544338] NET: Registered protocol family 1
[ 0.544475] checking if image is initramfs... it is
[ 1.044101] Switched to high resolution mode on CPU 0
[ 1.099516] Freeing initrd memory: 7376k freed
[ 1.099619] cpufreq: No nForce2 chipset.
[ 1.099744] audit: initializing netlink socket (disabled)
[ 1.099762] type=2000 audit(1262726535.096:1): initialized
[ 1.107127] highmem bounce pool size: 64 pages
[ 1.107132] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.108226] VFS: Disk quotas dquot_6.5.1
[ 1.108274] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.108800] fuse init (API version 7.10)
[ 1.108878] msgmni has been set to 1724
[ 1.109033] alg: No test for stdrng (krng)
[ 1.109043] io scheduler noop registered
[ 1.109045] io scheduler anticipatory registered
[ 1.109047] io scheduler deadline registered
[ 1.109060] io scheduler cfq registered (default)
[ 1.109079] pci 0000:00:00.0: Enabling HT MSI Mapping
[ 1.124056] pci 0000:00:0b.0: Enabling HT MSI Mapping
[ 1.124063] pci 0000:00:0b.0: Found enabled HT MSI Mapping
[ 1.124067] pci 0000:00:0b.0: Linking AER extended capability
[ 1.124075] pci 0000:00:0c.0: Enabling HT MSI Mapping
[ 1.124081] pci 0000:00:0c.0: Found enabled HT MSI Mapping
[ 1.124084] pci 0000:00:0c.0: Linking AER extended capability
[ 1.124092] pci 0000:00:0d.0: Enabling HT MSI Mapping
[ 1.124098] pci 0000:00:0d.0: Found enabled HT MSI Mapping
[ 1.124101] pci 0000:00:0d.0: Linking AER extended capability
[ 1.124109] pci 0000:00:0e.0: Enabling HT MSI Mapping
[ 1.124115] pci 0000:00:0e.0: Found enabled HT MSI Mapping
[ 1.124117] pci 0000:00:0e.0: Linking AER extended capability
[ 1.124134] pci 0000:01:00.0: Boot video device
[ 1.130354] pcieport-driver 0000:00:0b.0: setting latency timer to 64
[ 1.130373] pcieport-driver 0000:00:0b.0: found MSI capability
[ 1.130387] pcieport-driver 0000:00:0b.0: irq 2303 for MSI/MSI-X
[ 1.130393] pci_express 0000:00:0b.0:pcie00: allocate port service
[ 1.130405] pci_express 0000:00:0b.0:pcie03: allocate port service
[ 1.130434] pcieport-driver 0000:00:0c.0: setting latency timer to 64
[ 1.130452] pcieport-driver 0000:00:0c.0: found MSI capability
[ 1.130461] pcieport-driver 0000:00:0c.0: irq 2302 for MSI/MSI-X
[ 1.130467] pci_express 0000:00:0c.0:pcie00: allocate port service
[ 1.130476] pci_express 0000:00:0c.0:pcie03: allocate port service
[ 1.130508] pcieport-driver 0000:00:0d.0: setting latency timer to 64
[ 1.130525] pcieport-driver 0000:00:0d.0: found MSI capability
[ 1.130535] pcieport-driver 0000:00:0d.0: irq 2301 for MSI/MSI-X
[ 1.130540] pci_express 0000:00:0d.0:pcie00: allocate port service
[ 1.130550] pci_express 0000:00:0d.0:pcie03: allocate port service
[ 1.130578] pcieport-driver 0000:00:0e.0: setting latency timer to 64
[ 1.130595] pcieport-driver 0000:00:0e.0: found MSI capability
[ 1.130604] pcieport-driver 0000:00:0e.0: irq 2300 for MSI/MSI-X
[ 1.130610] pci_express 0000:00:0e.0:pcie00: allocate port service
[ 1.130620] pci_express 0000:00:0e.0:pcie03: allocate port service
[ 1.130660] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.130667] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.130794] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.130796] ACPI: Power Button (FF) [PWRF]
[ 1.130832] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 1.130835] ACPI: Power Button (CM) [PWRB]
[ 1.130879] fan PNP0C0B:00: registered as cooling_device0
[ 1.130883] ACPI: Fan [FAN] (on)
[ 1.131321] processor ACPI_CPU:00: registered as cooling_device1
[ 1.135553] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.135855] ACPI: Thermal Zone [THRM] (40 C)
[ 1.135890] isapnp: Scanning for PnP cards...
[ 1.488262] isapnp: No Plug & Play device found
[ 1.489231] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.489309] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.489556] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.490231] brd: module loaded
[ 1.490509] loop: module loaded
[ 1.490565] Fixed MDIO Bus: probed
[ 1.490570] PPP generic driver version 2.4.2
[ 1.490621] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 1.490644] Driver 'sd' needs updating - please use bus_type methods
[ 1.490652] Driver 'sr' needs updating - please use bus_type methods
[ 1.490805] sata_nv 0000:00:07.0: version 3.5
[ 1.491141] ACPI: PCI Interrupt Link [LSID] enabled at IRQ 11
[ 1.491144] PCI: setting IRQ 11 as level-triggered
[ 1.491148] sata_nv 0000:00:07.0: PCI INT A -> Link[LSID] -> GSI 11 (level, low) -> IRQ 11
[ 1.491214] sata_nv 0000:00:07.0: setting latency timer to 64
[ 1.491301] scsi0 : sata_nv
[ 1.491398] scsi1 : sata_nv
[ 1.491559] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd800 irq 11
[ 1.491562] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd808 irq 11
[ 2.212013] ata1: SATA link down (SStatus 0 SControl 300)
[ 2.936011] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.936362] ACPI: PCI Interrupt Link [LFID] enabled at IRQ 5
[ 2.936364] PCI: setting IRQ 5 as level-triggered
[ 2.936368] sata_nv 0000:00:08.0: PCI INT A -> Link[LFID] -> GSI 5 (level, low) -> IRQ 5
[ 2.936410] sata_nv 0000:00:08.0: setting latency timer to 64
[ 2.936443] scsi2 : sata_nv
[ 2.936487] scsi3 : sata_nv
[ 2.936645] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc400 irq 5
[ 2.936648] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc408 irq 5
[ 3.816031] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.824248] ata3.00: ATA-7: HDT722520DLA380, V44OA91A, max UDMA/133
[ 3.824251] ata3.00: 390721968 sectors, multi 1: LBA48 NCQ (depth 0/32)
[ 3.840252] ata3.00: configured for UDMA/133
[ 4.564010] ata4: SATA link down (SStatus 0 SControl 300)
[ 4.564115] scsi 2:0:0:0: Direct-Access ATA HDT722520DLA380 V44O PQ: 0 ANSI: 5
[ 4.564203] sd 2:0:0:0: [sda] 390721968 512-byte hardware sectors: (200 GB/186 GiB)
[ 4.564218] sd 2:0:0:0: [sda] Write Protect is off
[ 4.564220] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.564240] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.564301] sd 2:0:0:0: [sda] 390721968 512-byte hardware sectors: (200 GB/186 GiB)
[ 4.564312] sd 2:0:0:0: [sda] Write Protect is off
[ 4.564314] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.564333] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.564336] sda: sda1 sda2 sda3 < sda5 >
[ 4.593671] sd 2:0:0:0: [sda] Attached SCSI disk
[ 4.593718] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 4.593797] pata_amd 0000:00:06.0: version 0.3.10
[ 4.593837] pata_amd 0000:00:06.0: setting latency timer to 64
[ 4.593892] scsi4 : pata_amd
[ 4.593936] scsi5 : pata_amd
[ 4.594593] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 4.594596] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 4.756289] ata5.00: ATAPI: PIONEER DVD-RW DVR-110D, 1.17, max UDMA/66
[ 4.756311] ata5: nv_mode_filter: 0x1f39f&0x701f->0x701f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:600:0x13)
[ 4.772234] ata5.00: configured for UDMA/33
[ 4.948850] scsi 4:0:0:0: CD-ROM PIONEER DVD-RW DVR-110D 1.17 PQ: 0 ANSI: 5
[ 4.967212] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 4.967215] Uniform CD-ROM driver Revision: 3.20
[ 4.967306] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 4.967342] sr 4:0:0:0: Attached scsi generic sg1 type 5
[ 4.967719] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.967981] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 11
[ 4.967985] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 11 (level, low) -> IRQ 11
[ 4.968011] ehci_hcd 0000:00:02.1: setting latency timer to 64
[ 4.968014] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 4.968073] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 4.968099] ehci_hcd 0000:00:02.1: debug port 1
[ 4.968102] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[ 4.968109] ehci_hcd 0000:00:02.1: irq 11, io mem 0xfeb00000
[ 4.980008] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 4.980082] usb usb1: configuration #1 chosen from 1 choice
[ 4.980106] hub 1-0:1.0: USB hub found
[ 4.980115] hub 1-0:1.0: 10 ports detected
[ 4.980205] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.980445] ACPI: PCI Interrupt Link [LUBA] enabled at IRQ 3
[ 4.980447] PCI: setting IRQ 3 as level-triggered
[ 4.980450] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUBA] -> GSI 3 (level, low) -> IRQ 3
[ 4.980458] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 4.980461] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 4.980496] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 4.980509] ohci_hcd 0000:00:02.0: irq 3, io mem 0xd0103000
[ 5.038035] usb usb2: configuration #1 chosen from 1 choice
[ 5.038056] hub 2-0:1.0: USB hub found
[ 5.038065] hub 2-0:1.0: 10 ports detected
[ 5.038143] uhci_hcd: USB Universal Host Controller Interface driver
[ 5.038212] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 5.038215] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 5.038743] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 5.038833] mice: PS/2 mouse device common for all mice
[ 5.038941] rtc_cmos 00:04: RTC can wake from S4
[ 5.038974] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 5.038990] rtc0: alarms up to one year, y3k, 242 bytes nvram
[ 5.039045] device-mapper: uevent: version 1.0.3
[ 5.039140] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 5.039183] device-mapper: multipath: version 1.0.5 loaded
[ 5.039185] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 5.039246] EISA: Probing bus 0 at eisa.0
[ 5.039259] Cannot allocate resource for EISA slot 4
[ 5.039269] EISA: Detected 0 cards.
[ 5.039291] cpuidle: using governor ladder
[ 5.039293] cpuidle: using governor menu
[ 5.039737] TCP cubic registered
[ 5.039827] NET: Registered protocol family 10
[ 5.040179] lo: Disabled Privacy Extensions
[ 5.040447] NET: Registered protocol family 17
[ 5.040464] Bluetooth: L2CAP ver 2.11
[ 5.040465] Bluetooth: L2CAP socket layer initialized
[ 5.040468] Bluetooth: SCO (Voice Link) ver 0.6
[ 5.040469] Bluetooth: SCO socket layer initialized
[ 5.040490] Bluetooth: RFCOMM socket layer initialized
[ 5.040499] Bluetooth: RFCOMM TTY layer initialized
[ 5.040501] Bluetooth: RFCOMM ver 1.10
[ 5.040520] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3200+ processors (1 cpu cores) (version 2.20.00)
[ 5.044857] powernow-k8: BIOS error - no PSB or ACPI _PSS objects
[ 5.044912] IO APIC resources could be not be allocated.
[ 5.044953] Using IPI No-Shortcut mode
[ 5.045019] registered taskstats version 1
[ 5.045130] Magic number: 10:394:398
[ 5.045232] rtc_cmos 00:04: setting system clock to 2010-01-05 21:22:19 UTC (1262726539)
[ 5.045235] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 5.045237] EDD information not available.
[ 5.045648] Freeing unused kernel memory: 532k freed
[ 5.045767] Write protecting the kernel text: 4116k
[ 5.045806] Write protecting the kernel read-only data: 1524k
[ 5.080632] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 5.316024] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 5.565310] Floppy drive(s): fd0 is 1.44M
[ 5.583872] FDC 0 is a post-1991 82077
[ 5.680661] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
[ 5.680956] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 5
[ 5.680960] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 5 (level, low) -> IRQ 5
[ 5.680965] forcedeth 0000:00:0a.0: setting latency timer to 64
[ 5.681035] nv_probe: set workaround bit for reversed mac addr
[ 6.200708] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:15:f2:37:60:ae
[ 6.200712] forcedeth 0000:00:0a.0: highdma csum timirq gbit lnktim desc-v3
[ 6.320155] PM: Starting manual resume from disk
[ 6.320158] PM: Resume from partition 8:5
[ 6.320160] PM: Checking hibernation image.
[ 6.320288] PM: Resume from disk failed.
[ 6.350146] EXT4-fs: barriers enabled
[ 6.360556] kjournald2 starting. Commit interval 5 seconds
[ 6.360566] EXT4-fs: delayed allocation enabled
[ 6.360568] EXT4-fs: file extents enabled
[ 6.365696] EXT4-fs: mballoc enabled
[ 6.365700] EXT4-fs: mounted filesystem with ordered data mode.
[ 9.251916] usb 1-1: configuration #1 chosen from 1 choice
[ 9.652010] usb 2-2: new low speed USB device using ohci_hcd and address 2
[ 9.866172] usb 2-2: configuration #1 chosen from 1 choice
[ 10.021687] udev: starting version 141
[ 10.162121] Initializing USB Mass Storage driver...
[ 10.168052] usb 2-9: new full speed USB device using ohci_hcd and address 3
[ 10.168906] scsi6 : SCSI emulation for USB Mass Storage devices
[ 10.169108] usbcore: registered new interface driver usb-storage
[ 10.169131] USB Mass Storage support registered.
[ 10.169505] usb-storage: device found at 2
[ 10.169507] usb-storage: waiting for device to settle before scanning
[ 10.215569] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4c00
[ 10.215604] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4c40
[ 10.295153] usbcore: registered new interface driver hiddev
[ 10.305528] input: Razer Razer Diamondback Optical Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.0/input/input4
[ 10.330663] parport_pc 00:09: reported by Plug and Play ACPI
[ 10.330711] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 10.332924] generic-usb 0003:1532:0002.0001: input,hidraw0: USB HID v1.10 Mouse [Razer Razer Diamondback Optical Mouse] on usb-0000:00:02.0-2/input0
[ 10.332942] usbcore: registered new interface driver usbhid
[ 10.332961] usbhid: v2.6:USB HID core driver
[ 10.397315] usb 2-9: configuration #1 chosen from 1 choice
[ 10.534581] Linux agpgart interface v0.103
[ 10.576635] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 10.704018] usb 2-10: new low speed USB device using ohci_hcd and address 4
[ 10.917697] usb 2-10: configuration #1 chosen from 1 choice
[ 11.007895] nvidia: module license 'NVIDIA' taints kernel.
[ 11.266164] ppdev: user-space parallel port driver
[ 11.279774] ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 3
[ 11.279780] nvidia 0000:01:00.0: PCI INT A -> Link[LNK3] -> GSI 3 (level, low) -> IRQ 3
[ 11.279787] nvidia 0000:01:00.0: setting latency timer to 64
[ 11.280438] usblp0: USB Bidirectional printer dev 3 if 0 alt 1 proto 2 vid 0x03F0 pid 0x1204
[ 11.280460] usbcore: registered new interface driver usblp
[ 11.281477] NVRM: loading NVIDIA UNIX x86 Kernel Module 180.44 Mon Mar 23 14:59:10 PST 2009
[ 11.285515] input: Wacom Volito as /devices/pci0000:00/0000:00:02.0/usb2/2-10/2-10:1.0/input/input6
[ 11.329277] usbcore: registered new interface driver wacom
[ 11.329303] wacom: v1.49:USB Wacom Graphire and Wacom Intuos tablet driver
[ 11.481798] lp0: using parport0 (interrupt-driven).
[ 11.579212] Adding 2971984k swap on /dev/sda5. Priority:-1 extents:1 across:2971984k
[ 12.112631] EXT4 FS on sda1, internal journal on sda1:8
[ 13.070434] type=1505 audit(1262726547.522:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=1957
[ 13.120423] type=1505 audit(1262726547.574:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=1961
[ 13.120607] type=1505 audit(1262726547.574:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=1961
[ 13.120664] type=1505 audit(1262726547.574:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=1961
[ 13.120710] type=1505 audit(1262726547.574:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=1961
[ 13.266448] type=1505 audit(1262726547.718:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=1966
[ 13.266702] type=1505 audit(1262726547.718:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=1966
[ 13.295895] type=1505 audit(1262726547.746:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=1970
[ 15.200908] usb-storage: device scan complete
[ 15.203629] scsi 6:0:0:0: Direct-Access Seagate Desktop 0130 PQ: 0 ANSI: 4
[ 15.206736] sd 6:0:0:0: [sdb] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB)
[ 15.207483] sd 6:0:0:0: [sdb] Write Protect is off
[ 15.207488] sd 6:0:0:0: [sdb] Mode Sense: 2f 08 00 00
[ 15.207490] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 15.208705] sd 6:0:0:0: [sdb] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB)
[ 15.209480] sd 6:0:0:0: [sdb] Write Protect is off
[ 15.209483] sd 6:0:0:0: [sdb] Mode Sense: 2f 08 00 00
[ 15.209485] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 15.209491] sdb: sdb1
[ 15.224521] sd 6:0:0:0: [sdb] Attached SCSI disk
[ 15.224588] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 18.369903] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 18.369906] Bluetooth: BNEP filters: protocol multicast
[ 18.501183] Bridge firewalling registered
[ 34.052020] eth0: no IPv6 routers present
