J'ai trouvé mieux : /var/log/dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.31-17-generic (buildd@palmer) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #54-Ubuntu SMP Thu Dec 10 16:20:31 UTC 2009 (Ubuntu 2.6.31-17.54-generic)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fe80000 (usable)
[ 0.000000] BIOS-e820: 000000007fe80000 - 000000007ff00000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007ff00000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] last_pfn = 0x7fe80 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07FF00000 mask FFFF00000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable)
[ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 000000000009f800 (usable)
[ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000007fe80000 (usable)
[ 0.000000] modified: 000000007fe80000 - 000000007ff00000 (ACPI NVS)
[ 0.000000] modified: 000000007ff00000 - 0000000080000000 (reserved)
[ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] modified: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] modified: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] modified: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
[ 0.000000] RAMDISK: 37868000 - 37feff34
[ 0.000000] Allocated new RAMDISK: 008ad000 - 01034f34
[ 0.000000] Move RAMDISK from 0000000037868000 - 0000000037feff33 to 008ad000 - 01034f33
[ 0.000000] ACPI: RSDP 000f64e0 00014 (v00 PTLTD )
[ 0.000000] ACPI: RSDT 7fe85369 00050 (v01 PTLTD Capell00 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 7fe8ce20 00074 (v01 Acer Grape 06040000 LOHR 0000005A)
[ 0.000000] ACPI: DSDT 7fe8708a 05D96 (v01 Acer CALISTGA 06040000 INTL 20050228)
[ 0.000000] ACPI: FACS 7fe8dfc0 00040
[ 0.000000] ACPI: APIC 7fe8ce94 00068 (v01 Acer Grape 06040000 LOHR 0000005A)
[ 0.000000] ACPI: HPET 7fe8cefc 00038 (v01 Acer Grape 06040000 LOHR 0000005A)
[ 0.000000] ACPI: MCFG 7fe8cf34 0003C (v01 Acer Grape 06040000 LOHR 0000005A)
[ 0.000000] ACPI: APIC 7fe8cf70 00068 (v01 PTLTD APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 7fe8cfd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: SSDT 7fe86a3b 0064F (v01 SataRe SataPri 00001000 INTL 20050228)
[ 0.000000] ACPI: SSDT 7fe863a9 00692 (v01 SataRe SataSec 00001000 INTL 20050228)
[ 0.000000] ACPI: SSDT 7fe85945 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT 7fe8589f 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT 7fe853b9 004E6 (v01 PmRef CpuPm 00003000 INTL 20050228)
[ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1158MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00008000 - 0000ef00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008a80a0] TEXT DATA BSS ==> [0000100000 - 00008a80a0]
[ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
[ 0.000000] #5 [00008a9000 - 00008ac0f9] BRK ==> [00008a9000 - 00008ac0f9]
[ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
[ 0.000000] #7 [00008ad000 - 0001034f34] NEW RAMDISK ==> [00008ad000 - 0001034f34]
[ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
[ 0.000000] found SMP MP-table at [c00f6510] f6510
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0007fe80
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000002
[ 0.000000] 0: 0x00000006 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007fe80
[ 0.000000] On node 0 totalpages: 523803
[ 0.000000] free_area_init_node: node 0, pgdat c0784960, node_mem_map c1035000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3963 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2318 pages used for memmap
[ 0.000000] HighMem zone: 294260 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages at c203f000, static data 35612 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519709
[ 0.000000] Kernel command line: root=UUID=dfdad26b-2538-48b6-b831-1bf1a29e13b8
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 10478080 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007fe80)
[ 0.000000] Memory: 2051296k/2095616k available (4566k kernel code, 43164k reserved, 2142k data, 540k init, 1186312k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc078e000 - 0xc0815000 ( 540 kB)
[ 0.000000] .data : 0xc0575a64 - 0xc078d408 (2142 kB)
[ 0.000000] .text : 0xc0100000 - 0xc0575a64 (4566 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] NR_IRQS:2304 nr_irqs:424
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1662.722 MHz processor.
[ 0.002747] Console: colour VGA+ 80x25
[ 0.002753] console [tty0] enabled
[ 0.004000] hpet clockevent registered
[ 0.004000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3325.44 BogoMIPS (lpj=6650888)
[ 0.004000] Security Framework initialized
[ 0.004000] AppArmor: AppArmor initialized
[ 0.004000] Mount-cache hash table entries: 512
[ 0.004000] Initializing cgroup subsys ns
[ 0.004000] Initializing cgroup subsys cpuacct
[ 0.004000] Initializing cgroup subsys memory
[ 0.004000] Initializing cgroup subsys freezer
[ 0.004000] Initializing cgroup subsys net_cls
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 2048K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 0
[ 0.004000] mce: CPU supports 6 MCE banks
[ 0.004000] CPU0: Thermal monitoring enabled (TM2)
[ 0.004000] using mwait in idle threads.
[ 0.004000] Performance Counters: Core2 events, Intel PMU driver.
[ 0.004000] ... version: 2
[ 0.004000] ... bit width: 40
[ 0.004000] ... generic counters: 2
[ 0.004000] ... value mask: 000000ffffffffff
[ 0.004000] ... max period: 000000007fffffff
[ 0.004000] ... fixed-purpose counters: 3
[ 0.004000] ... counter mask: 0000000700000003
[ 0.004000] Checking 'hlt' instruction... OK.
[ 0.020006] ACPI: Core revision 20090521
[ 0.040483] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.083175] CPU0: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz stepping 06
[ 0.084001] APIC calibration not consistent with PM-Timer: 187ms instead of 100ms
[ 0.084001] APIC delta adjusted to PM-Timer: 1039061 (1953411)
[ 0.084001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 3325.08 BogoMIPS (lpj=6650177)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 2048K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.004000] mce: CPU supports 6 MCE banks
[ 0.004000] CPU1: Thermal monitoring enabled (TM2)
[ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.170458] CPU1: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz stepping 06
[ 0.171127] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.172030] Brought up 2 CPUs
[ 0.172093] Total of 2 processors activated (6650.53 BogoMIPS).
[ 0.172212] CPU0 attaching sched-domain:
[ 0.172217] domain 0: span 0-1 level MC
[ 0.172223] groups: 0 1
[ 0.172233] CPU1 attaching sched-domain:
[ 0.172237] domain 0: span 0-1 level MC
[ 0.172242] groups: 1 0
[ 0.176034] Booting paravirtualized kernel on bare hardware
[ 0.176451] regulator: core version 0.5
[ 0.176451] Time: 8:34:50 Date: 01/27/10
[ 0.176451] NET: Registered protocol family 16
[ 0.176554] EISA bus registered
[ 0.176628] ACPI: bus type pci registered
[ 0.176809] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.176875] PCI: MCFG area at e0000000 reserved in E820
[ 0.176934] PCI: Using MMCONFIG for extended config space
[ 0.176993] PCI: Using configuration type 1 for base access
[ 0.179127] bio: create slab <bio-0> at 0
[ 0.181803] ACPI: EC: Look up EC in DSDT
[ 0.188672] ACPI: BIOS _OSI(Linux) query ignored
[ 0.190086] ACPI: Interpreter enabled
[ 0.190155] ACPI: (supports S0 S3 S4 S5)
[ 0.190416] ACPI: Using IOAPIC for interrupt routing
[ 0.196437] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.224146] ACPI: EC: GPE storm detected, transactions will use polling mode
[ 0.267236] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
[ 0.267303] ACPI: EC: driver started in poll mode
[ 0.268072] ACPI: No dock devices found.
[ 0.268955] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.269216] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.269283] pci 0000:00:01.0: PME# disabled
[ 0.269471] pci 0000:00:1b.0: reg 10 64bit mmio: [0xd2500000-0xd2503fff]
[ 0.269559] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.269626] pci 0000:00:1b.0: PME# disabled
[ 0.269803] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.269869] pci 0000:00:1c.0: PME# disabled
[ 0.270050] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.270116] pci 0000:00:1c.1: PME# disabled
[ 0.270296] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.270363] pci 0000:00:1c.2: PME# disabled
[ 0.270543] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.270610] pci 0000:00:1c.3: PME# disabled
[ 0.270758] pci 0000:00:1d.0: reg 20 io port: [0x1800-0x181f]
[ 0.270850] pci 0000:00:1d.1: reg 20 io port: [0x1820-0x183f]
[ 0.270942] pci 0000:00:1d.2: reg 20 io port: [0x1840-0x185f]
[ 0.271035] pci 0000:00:1d.3: reg 20 io port: [0x1860-0x187f]
[ 0.271133] pci 0000:00:1d.7: reg 10 32bit mmio: [0xd2504000-0xd25043ff]
[ 0.271223] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.271290] pci 0000:00:1d.7: PME# disabled
[ 0.271576] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 0.271652] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
[ 0.271716] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0230 (mask 000f)
[ 0.271788] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at ff20 (mask 000f)
[ 0.271952] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07]
[ 0.271964] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03]
[ 0.271977] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07]
[ 0.271989] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03]
[ 0.272014] pci 0000:00:1f.2: reg 20 io port: [0x18b0-0x18bf]
[ 0.272066] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.272132] pci 0000:00:1f.2: PME# disabled
[ 0.272270] pci 0000:00:1f.3: reg 20 io port: [0x18c0-0x18df]
[ 0.272368] pci 0000:01:00.0: reg 10 32bit mmio: [0xd1000000-0xd1ffffff]
[ 0.272385] pci 0000:01:00.0: reg 14 64bit mmio: [0xc0000000-0xcfffffff]
[ 0.272401] pci 0000:01:00.0: reg 1c 64bit mmio: [0xd0000000-0xd0ffffff]
[ 0.272412] pci 0000:01:00.0: reg 24 io port: [0x2000-0x207f]
[ 0.272422] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.272542] pci 0000:00:01.0: bridge io port: [0x2000-0x2fff]
[ 0.272549] pci 0000:00:01.0: bridge 32bit mmio: [0xd0000000-0xd1ffffff]
[ 0.272558] pci 0000:00:01.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff]
[ 0.272647] pci 0000:00:1c.0: bridge io port: [0x00-0xfff]
[ 0.272655] pci 0000:00:1c.0: bridge 32bit mmio: [0x000000-0x0fffff]
[ 0.272875] pci 0000:04:00.0: reg 10 64bit mmio: [0xd2000000-0xd200ffff]
[ 0.273010] pci 0000:04:00.0: PME# supported from D3hot D3cold
[ 0.273078] pci 0000:04:00.0: PME# disabled
[ 0.273242] pci 0000:00:1c.2: bridge 32bit mmio: [0xd2000000-0xd20fffff]
[ 0.273416] pci 0000:05:00.0: reg 10 32bit mmio: [0xd2100000-0xd2100fff]
[ 0.273686] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[ 0.273761] pci 0000:05:00.0: PME# disabled
[ 0.273966] pci 0000:00:1c.3: bridge 32bit mmio: [0xd2100000-0xd21fffff]
[ 0.274042] pci 0000:06:00.0: reg 10 32bit mmio: [0xd2201000-0xd22017ff]
[ 0.274057] pci 0000:06:00.0: reg 14 io port: [0x3000-0x307f]
[ 0.274142] pci 0000:06:00.0: supports D2
[ 0.274146] pci 0000:06:00.0: PME# supported from D2 D3hot D3cold
[ 0.274215] pci 0000:06:00.0: PME# disabled
[ 0.274343] pci 0000:06:04.0: reg 10 32bit mmio: [0xd2200000-0xd2200fff]
[ 0.274381] pci 0000:06:04.0: supports D1 D2
[ 0.274386] pci 0000:06:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.274454] pci 0000:06:04.0: PME# disabled
[ 0.274575] pci 0000:06:04.1: reg 10 32bit mmio: [0xd2201800-0xd220187f]
[ 0.274669] pci 0000:06:04.1: supports D1 D2
[ 0.274673] pci 0000:06:04.1: PME# supported from D0 D1 D2 D3hot
[ 0.274741] pci 0000:06:04.1: PME# disabled
[ 0.274863] pci 0000:06:04.2: reg 10 32bit mmio: [0xd2201c00-0xd2201cff]
[ 0.274957] pci 0000:06:04.2: supports D1 D2
[ 0.274961] pci 0000:06:04.2: PME# supported from D0 D1 D2 D3hot
[ 0.275029] pci 0000:06:04.2: PME# disabled
[ 0.275151] pci 0000:06:04.3: reg 10 32bit mmio: [0xd2202000-0xd220207f]
[ 0.275245] pci 0000:06:04.3: supports D1 D2
[ 0.275250] pci 0000:06:04.3: PME# supported from D0 D1 D2 D3hot
[ 0.275317] pci 0000:06:04.3: PME# disabled
[ 0.275438] pci 0000:06:04.4: reg 10 32bit mmio: [0x000000-0x0000ff]
[ 0.275532] pci 0000:06:04.4: supports D1 D2
[ 0.275536] pci 0000:06:04.4: PME# supported from D0 D1 D2 D3hot
[ 0.275604] pci 0000:06:04.4: PME# disabled
[ 0.275747] pci 0000:00:1e.0: transparent bridge
[ 0.275813] pci 0000:00:1e.0: bridge io port: [0x3000-0x3fff]
[ 0.275821] pci 0000:00:1e.0: bridge 32bit mmio: [0xd2200000-0xd22fffff]
[ 0.275910] pci_bus 0000:00: on NUMA node 0
[ 0.275919] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.276298] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[ 0.276460] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.276599] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.276736] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.276886] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 0.277070] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.283271] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 5 *6 10 12 14 15)
[ 0.283897] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 5 6 *11 12 14 15)
[ 0.284529] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 5 6 10 12 14 15) *11
[ 0.285189] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 5 6 11 12 14 15) *10
[ 0.285849] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 5 6 *10 12 14 15)
[ 0.286471] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 5 6 11 12 14 15) *0, disabled.
[ 0.287184] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 5 6 *10 12 14 15)
[ 0.287801] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 *5 6 11 12 14 15)
[ 0.288566] SCSI subsystem initialized
[ 0.288661] libata version 3.00 loaded.
[ 0.288661] usbcore: registered new interface driver usbfs
[ 0.288661] usbcore: registered new interface driver hub
[ 0.288661] usbcore: registered new device driver usb
[ 0.288661] ACPI: WMI: Mapper loaded
[ 0.288661] PCI: Using ACPI for IRQ routing
[ 0.288661] pci 0000:00:1c.0: BAR 13: can't allocate resource
[ 0.288661] pci 0000:00:1c.0: BAR 14: can't allocate resource
[ 0.300014] Bluetooth: Core ver 2.15
[ 0.300098] NET: Registered protocol family 31
[ 0.300098] Bluetooth: HCI device and connection manager initialized
[ 0.300146] Bluetooth: HCI socket layer initialized
[ 0.300205] NetLabel: Initializing
[ 0.300262] NetLabel: domain hash size = 128
[ 0.300319] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.300397] NetLabel: unlabeled traffic allowed by default
[ 0.300519] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.300753] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.320014] pnp: PnP ACPI init
[ 0.320089] ACPI: bus type pnp registered
[ 0.399633] pnp: PnP ACPI: found 11 devices
[ 0.399696] ACPI: ACPI bus type pnp unregistered
[ 0.399756] PnPBIOS: Disabled by ACPI PNP
[ 0.399829] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.399895] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
[ 0.399959] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
[ 0.400042] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
[ 0.400107] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.400171] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.400243] system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved
[ 0.400317] system 00:06: ioport range 0x800-0x80f has been reserved
[ 0.400380] system 00:06: ioport range 0x1000-0x107f has been reserved
[ 0.400443] system 00:06: ioport range 0x1180-0x11bf has been reserved
[ 0.400505] system 00:06: ioport range 0x1640-0x164f has been reserved
[ 0.400567] system 00:06: ioport range 0xfe00-0xfefe has been reserved
[ 0.400630] system 00:06: ioport range 0xff2c-0xff2f has been reserved
[ 0.435492] AppArmor: AppArmor Filesystem Enabled
[ 0.435681] pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xd0000000-0xcfffffff]
[ 0.435757] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.435817] pci 0000:00:01.0: IO window: 0x2000-0x2fff
[ 0.435881] pci 0000:00:01.0: MEM window: 0xd0000000-0xd1ffffff
[ 0.435944] pci 0000:00:01.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff
[ 0.436031] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.436090] pci 0000:00:1c.0: IO window: disabled
[ 0.436153] pci 0000:00:1c.0: MEM window: disabled
[ 0.436216] pci 0000:00:1c.0: PREFETCH window: disabled
[ 0.436279] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
[ 0.436340] pci 0000:00:1c.1: IO window: disabled
[ 0.436404] pci 0000:00:1c.1: MEM window: disabled
[ 0.436467] pci 0000:00:1c.1: PREFETCH window: disabled
[ 0.436531] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
[ 0.436591] pci 0000:00:1c.2: IO window: disabled
[ 0.436656] pci 0000:00:1c.2: MEM window: 0xd2000000-0xd20fffff
[ 0.436719] pci 0000:00:1c.2: PREFETCH window: disabled
[ 0.436783] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05
[ 0.436843] pci 0000:00:1c.3: IO window: disabled
[ 0.436907] pci 0000:00:1c.3: MEM window: 0xd2100000-0xd21fffff
[ 0.436972] pci 0000:00:1c.3: PREFETCH window: disabled
[ 0.437046] pci 0000:06:04.0: CardBus bridge, secondary bus 0000:07
[ 0.437110] pci 0000:06:04.0: IO window: 0x003400-0x0034ff
[ 0.437175] pci 0000:06:04.0: IO window: 0x003800-0x0038ff
[ 0.437241] pci 0000:06:04.0: PREFETCH window: 0x80000000-0x83ffffff
[ 0.437307] pci 0000:06:04.0: MEM window: 0x84000000-0x87ffffff
[ 0.437373] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06
[ 0.437435] pci 0000:00:1e.0: IO window: 0x3000-0x3fff
[ 0.437501] pci 0000:00:1e.0: MEM window: 0xd2200000-0xd22fffff
[ 0.437565] pci 0000:00:1e.0: PREFETCH window: 0x80000000-0x83ffffff
[ 0.437639] alloc irq_desc for 16 on node -1
[ 0.437643] alloc kstat_irqs on node -1
[ 0.437652] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.437719] pci 0000:00:01.0: setting latency timer to 64
[ 0.437732] alloc irq_desc for 17 on node -1
[ 0.437736] alloc kstat_irqs on node -1
[ 0.437743] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.437813] pci 0000:00:1c.0: setting latency timer to 64
[ 0.437827] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.437895] pci 0000:00:1c.1: setting latency timer to 64
[ 0.437908] alloc irq_desc for 18 on node -1
[ 0.437911] alloc kstat_irqs on node -1
[ 0.437918] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.437985] pci 0000:00:1c.2: setting latency timer to 64
[ 0.437998] alloc irq_desc for 19 on node -1
[ 0.438002] alloc kstat_irqs on node -1
[ 0.438008] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.438077] pci 0000:00:1c.3: setting latency timer to 64
[ 0.438086] pci 0000:00:1e.0: enabling device (0004 -> 0007)
[ 0.438155] pci 0000:00:1e.0: setting latency timer to 64
[ 0.438171] pci 0000:06:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.438242] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.438248] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.438254] pci_bus 0000:01: resource 0 io: [0x2000-0x2fff]
[ 0.438259] pci_bus 0000:01: resource 1 mem: [0xd0000000-0xd1ffffff]
[ 0.438265] pci_bus 0000:01: resource 2 pref mem [0xc0000000-0xcfffffff]
[ 0.438270] pci_bus 0000:02: resource 0 mem: [0x0-0xfff]
[ 0.438275] pci_bus 0000:02: resource 1 mem: [0x0-0xfffff]
[ 0.438281] pci_bus 0000:04: resource 1 mem: [0xd2000000-0xd20fffff]
[ 0.438286] pci_bus 0000:05: resource 1 mem: [0xd2100000-0xd21fffff]
[ 0.438292] pci_bus 0000:06: resource 0 io: [0x3000-0x3fff]
[ 0.438297] pci_bus 0000:06: resource 1 mem: [0xd2200000-0xd22fffff]
[ 0.438302] pci_bus 0000:06: resource 2 pref mem [0x80000000-0x83ffffff]
[ 0.438307] pci_bus 0000:06: resource 3 io: [0x00-0xffff]
[ 0.438312] pci_bus 0000:06: resource 4 mem: [0x000000-0xffffffff]
[ 0.438318] pci_bus 0000:07: resource 0 io: [0x3400-0x34ff]
[ 0.438322] pci_bus 0000:07: resource 1 io: [0x3800-0x38ff]
[ 0.438328] pci_bus 0000:07: resource 2 pref mem [0x80000000-0x83ffffff]
[ 0.438333] pci_bus 0000:07: resource 3 mem: [0x84000000-0x87ffffff]
[ 0.438395] NET: Registered protocol family 2
[ 0.438628] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.439270] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.440085] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.440489] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.440553] TCP reno registered
[ 0.440734] NET: Registered protocol family 1
[ 0.440900] Trying to unpack rootfs image as initramfs...
[ 0.503260] Switched to high resolution mode on CPU 1
[ 0.503981] Switched to high resolution mode on CPU 0
[ 0.823114] Freeing initrd memory: 7711k freed
[ 0.828752] Simple Boot Flag at 0x36 set to 0x1
[ 0.829164] cpufreq-nforce2: No nForce2 chipset.
[ 0.829274] Scanning for low memory corruption every 60 seconds
[ 0.829515] audit: initializing netlink socket (disabled)
[ 0.831611] type=2000 audit(1264581289.828:1): initialized
[ 0.848776] highmem bounce pool size: 64 pages
[ 0.848844] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.851825] VFS: Disk quotas dquot_6.5.2
[ 0.852014] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.853149] fuse init (API version 7.12)
[ 0.853382] msgmni has been set to 1705
[ 0.853847] alg: No test for stdrng (krng)
[ 0.853932] io scheduler noop registered
[ 0.853992] io scheduler anticipatory registered
[ 0.854051] io scheduler deadline registered
[ 0.854188] io scheduler cfq registered (default)
[ 0.854414] pci 0000:01:00.0: Boot video device
[ 0.854668] alloc irq_desc for 24 on node -1
[ 0.854672] alloc kstat_irqs on node -1
[ 0.854687] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
[ 0.854700] pcieport-driver 0000:00:01.0: setting latency timer to 64
[ 0.854894] alloc irq_desc for 25 on node -1
[ 0.854898] alloc kstat_irqs on node -1
[ 0.854912] pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
[ 0.854928] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 0.855160] alloc irq_desc for 26 on node -1
[ 0.855164] alloc kstat_irqs on node -1
[ 0.855178] pcieport-driver 0000:00:1c.1: irq 26 for MSI/MSI-X
[ 0.855194] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 0.855423] alloc irq_desc for 27 on node -1
[ 0.855427] alloc kstat_irqs on node -1
[ 0.855440] pcieport-driver 0000:00:1c.2: irq 27 for MSI/MSI-X
[ 0.855456] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[ 0.855696] alloc irq_desc for 28 on node -1
[ 0.855699] alloc kstat_irqs on node -1
[ 0.855713] pcieport-driver 0000:00:1c.3: irq 28 for MSI/MSI-X
[ 0.855729] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[ 0.855909] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.856233] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.912116] ACPI: AC Adapter [ACAD] (on-line)
[ 0.912296] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.912372] ACPI: Power Button [PWRF]
[ 0.912521] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 0.912660] ACPI: Lid Switch [LID]
[ 0.912804] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 0.912879] ACPI: Sleep Button [SLPB]
[ 0.913019] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 0.913094] ACPI: Power Button [PWRB]
[ 0.914328] ACPI: SSDT 7fe860eb 001F6 (v01 PmRef Cpu0Ist 00003000 INTL 20050228)
[ 0.915418] ACPI: SSDT 7fe85ba4 004C2 (v01 PmRef Cpu0Cst 00003001 INTL 20050228)
[ 0.919527] Monitor-Mwait will be used to enter C-1 state
[ 0.919583] Monitor-Mwait will be used to enter C-2 state
[ 0.919633] Monitor-Mwait will be used to enter C-3 state
[ 0.919649] Marking TSC unstable due to TSC halts in idle
[ 0.919741] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 0.920027] processor LNXCPU:00: registered as cooling_device0
[ 0.920094] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 0.920880] ACPI: SSDT 7fe862e1 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20050228)
[ 0.921728] ACPI: SSDT 7fe86066 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050228)
[ 0.923343] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 0.923617] processor LNXCPU:01: registered as cooling_device1
[ 0.923684] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 1.112105] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.112181] ACPI: Thermal Zone [TZ00] (38 C)
[ 1.224106] thermal LNXTHERM:02: registered as thermal_zone1
[ 1.224181] ACPI: Thermal Zone [TZ01] (38 C)
[ 1.224365] isapnp: Scanning for PnP cards...
[ 1.579338] isapnp: No Plug & Play device found
[ 2.480163] ACPI: Battery Slot [BAT1] (battery present)
[ 2.480451] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.480725] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 2.483309] brd: module loaded
[ 2.484258] loop: module loaded
[ 2.484448] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[ 2.484731] ata_piix 0000:00:1f.2: version 2.13
[ 2.484756] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.484826] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 2.640035] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 2.640154] scsi0 : ata_piix
[ 2.640369] scsi1 : ata_piix
[ 2.642188] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x18b0 irq 14
[ 2.642254] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18b8 irq 15
[ 2.644143] Fixed MDIO Bus: probed
[ 2.644270] PPP generic driver version 2.4.2
[ 2.644494] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.644586] alloc irq_desc for 23 on node -1
[ 2.644590] alloc kstat_irqs on node -1
[ 2.644600] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.644679] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 2.644685] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.644826] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 2.648832] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.648900] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 2.648923] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd2504000
[ 2.660028] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.660219] usb usb1: configuration #1 chosen from 1 choice
[ 2.660334] hub 1-0:1.0: USB hub found
[ 2.660404] hub 1-0:1.0: 8 ports detected
[ 2.660581] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.660678] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.660779] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.660850] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.660856] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.660974] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.661096] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001800
[ 2.661298] usb usb2: configuration #1 chosen from 1 choice
[ 2.661410] hub 2-0:1.0: USB hub found
[ 2.661478] hub 2-0:1.0: 2 ports detected
[ 2.661622] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.661693] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.661699] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.661822] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 2.661943] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001820
[ 2.662141] usb usb3: configuration #1 chosen from 1 choice
[ 2.662252] hub 3-0:1.0: USB hub found
[ 2.662320] hub 3-0:1.0: 2 ports detected
[ 2.662461] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.662535] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.662541] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.662660] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 2.662777] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
[ 2.662975] usb usb4: configuration #1 chosen from 1 choice
[ 2.663091] hub 4-0:1.0: USB hub found
[ 2.663158] hub 4-0:1.0: 2 ports detected
[ 2.663297] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 2.663367] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 2.663373] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 2.663490] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 2.663606] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860
[ 2.663805] usb usb5: configuration #1 chosen from 1 choice
[ 2.663920] hub 5-0:1.0: USB hub found
[ 2.663988] hub 5-0:1.0: 2 ports detected
[ 2.664239] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS0] at 0x60,0x64 irq 1,12
[ 2.665923] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 2.666081] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.666149] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 2.666219] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 2.666286] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 2.666353] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 2.666537] mice: PS/2 mouse device common for all mice
[ 2.666855] rtc_cmos 00:07: RTC can wake from S4
[ 2.666977] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 2.667075] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 2.667334] device-mapper: uevent: version 1.0.3
[ 2.667561] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 2.667743] device-mapper: multipath: version 1.1.0 loaded
[ 2.667805] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 2.668096] EISA: Probing bus 0 at eisa.0
[ 2.668163] Cannot allocate resource for EISA slot 1
[ 2.668234] Cannot allocate resource for EISA slot 2
[ 2.668300] Cannot allocate resource for EISA slot 3
[ 2.668385] EISA: Detected 0 cards.
[ 2.668765] cpuidle: using governor ladder
[ 2.669076] cpuidle: using governor menu
[ 2.669420] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 2.670156] TCP cubic registered
[ 2.670515] NET: Registered protocol family 10
[ 2.671452] lo: Disabled Privacy Extensions
[ 2.672217] NET: Registered protocol family 17
[ 2.672310] Bluetooth: L2CAP ver 2.13
[ 2.672370] Bluetooth: L2CAP socket layer initialized
[ 2.672431] Bluetooth: SCO (Voice Link) ver 0.6
[ 2.672489] Bluetooth: SCO socket layer initialized
[ 2.672619] Bluetooth: RFCOMM TTY layer initialized
[ 2.672688] Bluetooth: RFCOMM socket layer initialized
[ 2.672748] Bluetooth: RFCOMM ver 1.11
[ 2.673450] Using IPI No-Shortcut mode
[ 2.673621] PM: Resume from disk failed.
[ 2.673635] registered taskstats version 1
[ 2.673821] Magic number: 10:872:574
[ 2.673965] rtc_cmos 00:07: setting system clock to 2010-01-27 08:34:52 UTC (1264581292)
[ 2.674031] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.674084] EDD information not available.
[ 2.812697] ata1.00: ATA-7: Hitachi HTS541612J9SA00, SBDOC70P, max UDMA/100
[ 2.812765] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.828844] ata2.00: ATAPI: Slimtype DVDRW SSM-8515S, GRS6, max UDMA/33
[ 2.829147] ata1.00: configured for UDMA/100
[ 2.829326] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54161 SBDO PQ: 0 ANSI: 5
[ 2.829523] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.829615] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 2.829732] sd 0:0:0:0: [sda] Write Protect is off
[ 2.829787] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.829816] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.830025] sda: sda1 sda2 sda3 sda4 <
[ 2.868396] ata2.00: configured for UDMA/33
[ 2.871468] scsi 1:0:0:0: CD-ROM Slimtype DVDRW SSM-8515S GRS6 PQ: 0 ANSI: 5
[ 2.880879] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.880954] Uniform CD-ROM driver Revision: 3.20
[ 2.881150] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.881232] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.883638] sda5 sda6 sda7 >
[ 2.911151] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.972067] usb 1-4: new high speed USB device using ehci_hcd and address 2
[ 3.000056] Clocksource tsc unstable (delta = -154308299 ns)
[ 3.052363] Freeing unused kernel memory: 540k freed
[ 3.052814] Write protecting the kernel text: 4568k
[ 3.052932] Write protecting the kernel read-only data: 1836k
[ 3.168904] usb 1-4: configuration #1 chosen from 1 choice
[ 3.206303] Linux agpgart interface v0.103
[ 3.271127] alloc irq_desc for 20 on node -1
[ 3.271131] alloc kstat_irqs on node -1
[ 3.271140] ohci1394 0000:06:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 3.271207] ohci1394 0000:06:00.0: setting latency timer to 64
[ 3.280337] tg3.c:v3.99 (April 20, 2009)
[ 3.280418] tg3 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 3.280483] tg3 0000:04:00.0: setting latency timer to 64
[ 3.283848] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/device:02/input/input6
[ 3.283967] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 3.292070] tg3 0000:04:00.0: wake-up capability disabled by ACPI
[ 3.292140] tg3 0000:04:00.0: PME# disabled
[ 3.353055] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[20] MMIO=[d2201000-d22017ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 3.359898] eth0: Tigon3 [partno(BCM95787m) rev b002] (PCI Express) MAC address 00:16:d4:56:ff:02
[ 3.359968] eth0: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1])
[ 3.360053] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 3.360107] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 4.155916] xor: automatically using best checksumming function: pIII_sse
[ 4.172009] pIII_sse : 5748.000 MB/sec
[ 4.172064] xor: using function: pIII_sse (5748.000 MB/sec)
[ 4.175030] device-mapper: dm-raid45: initialized v0.2594b
[ 4.331639] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 4.331709] EXT3-fs: write access will be enabled during recovery.
[ 4.629612] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f6a8b406211]
[ 4.715417] kjournald starting. Commit interval 5 seconds
[ 4.715459] EXT3-fs: sda5: orphan cleanup on readonly fs
[ 4.715470] ext3_orphan_cleanup: deleting unreferenced inode 565251
[ 4.715541] EXT3-fs: sda5: 1 orphan inode deleted
[ 4.715545] EXT3-fs: recovery complete.
[ 4.717594] EXT3-fs: mounted filesystem with writeback data mode.
[ 5.469721] type=1505 audit(1264581295.295:2): operation="profile_load" pid=453 name=/usr/share/gdm/guest-session/Xsession
[ 5.480404] type=1505 audit(1264581295.306:3): operation="profile_load" pid=454 name=/sbin/dhclient3
[ 5.481575] type=1505 audit(1264581295.306:4): operation="profile_load" pid=454 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 5.482120] type=1505 audit(1264581295.306:5): operation="profile_load" pid=454 name=/usr/lib/connman/scripts/dhclient-script
[ 5.518243] type=1505 audit(1264581295.342:6): operation="profile_load" pid=455 name=/usr/bin/evince
[ 5.532553] type=1505 audit(1264581295.358:7): operation="profile_load" pid=455 name=/usr/bin/evince-previewer
[ 5.540938] type=1505 audit(1264581295.366:8): operation="profile_load" pid=455 name=/usr/bin/evince-thumbnailer
[ 5.553501] type=1505 audit(1264581295.378:9): operation="profile_load" pid=457 name=/usr/lib/cups/backend/cups-pdf
[ 5.554770] type=1505 audit(1264581295.378:10): operation="profile_load" pid=457 name=/usr/sbin/cupsd
[ 5.558078] type=1505 audit(1264581295.382:11): operation="profile_load" pid=458 name=/usr/sbin/tcpdump
[ 15.715064] udev: starting version 147
[ 15.734840] lp: driver loaded but no devices found
[ 15.768305] irda_init()
[ 15.768319] NET: Registered protocol family 23
[ 15.813045] EXT3 FS on sda5, internal journal
[ 15.983228] tg3 0000:04:00.0: wake-up capability disabled by ACPI
[ 15.983237] tg3 0000:04:00.0: PME# disabled
[ 15.983347] alloc irq_desc for 29 on node -1
[ 15.983350] alloc kstat_irqs on node -1
[ 15.983369] tg3 0000:04:00.0: irq 29 for MSI/MSI-X
[ 16.185320] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 16.446971] intel_rng: FWH not detected
[ 16.503838] acer-wmi: Acer Laptop ACPI-WMI Extras
[ 16.554397] alloc irq_desc for 22 on node -1
[ 16.554401] alloc kstat_irqs on node -1
[ 16.554413] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 16.554461] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 16.626545] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
[ 16.701480] Registered led device: acer-wmi::mail
[ 17.463039] yenta_cardbus 0000:06:04.0: CardBus bridge found [1025:0090]
[ 17.463067] yenta_cardbus 0000:06:04.0: Using CSCINT to route CSC interrupts to PCI
[ 17.463070] yenta_cardbus 0000:06:04.0: Routing CardBus interrupts to PCI
[ 17.463077] yenta_cardbus 0000:06:04.0: TI: mfunc 0x90501212, devctl 0x44
[ 17.472407] sdhci: Secure Digital Host Controller Interface driver
[ 17.472411] sdhci: Copyright(c) Pierre Ossman
[ 17.578371] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 17.610138] cfg80211: Calling CRDA to update world regulatory domain
[ 17.629808] cfg80211: World regulatory domain updated:
[ 17.629812] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 17.629816] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.629819] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 17.629822] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 17.629825] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.629828] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.673928] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks
[ 17.673932] iwl3945: Copyright(c) 2003-2009 Intel Corporation
[ 17.674027] iwl3945 0000:05:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 17.674042] iwl3945 0000:05:00.0: setting latency timer to 64
[ 17.704925] yenta_cardbus 0000:06:04.0: ISA IRQ mask 0x0cf8, PCI irq 16
[ 17.704932] yenta_cardbus 0000:06:04.0: Socket status: 30000006
[ 17.704937] pci_bus 0000:06: Raising subordinate bus# of parent bus (#06) from #07 to #0a
[ 17.704947] yenta_cardbus 0000:06:04.0: pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
[ 17.704951] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3000-0x3fff: clean.
[ 17.705224] yenta_cardbus 0000:06:04.0: pcmcia: parent PCI bridge Memory window: 0xd2200000 - 0xd22fffff
[ 17.705227] yenta_cardbus 0000:06:04.0: pcmcia: parent PCI bridge Memory window: 0x80000000 - 0x83ffffff
[ 17.712311] sdhci-pci 0000:06:04.2: SDHCI controller found [1524:0550] (rev 1)
[ 17.712379] sdhci-pci 0000:06:04.2: enabling device (0000 -> 0002)
[ 17.712391] sdhci-pci 0000:06:04.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 17.712569] Registered led device: mmc0::
[ 17.712621] mmc0: SDHCI controller on PCI [0000:06:04.2] using PIO
[ 17.712654] sdhci-pci 0000:06:04.4: SDHCI controller found [1524:0551] (rev 1)
[ 17.712724] sdhci-pci 0000:06:04.4: enabling device (0000 -> 0002)
[ 17.712731] sdhci-pci 0000:06:04.4: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 17.712793] Registered led device: mmc1::
[ 17.712841] mmc1: SDHCI controller on PCI [0000:06:04.4] using PIO
[ 17.750950] iwl3945 0000:05:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
[ 17.750955] iwl3945 0000:05:00.0: Detected Intel Wireless WiFi Link 3945ABG
[ 17.751077] alloc irq_desc for 30 on node -1
[ 17.751080] alloc kstat_irqs on node -1
[ 17.751116] iwl3945 0000:05:00.0: irq 30 for MSI/MSI-X
[ 17.858891] Linux video capture interface: v2.00
[ 17.861529] gspca: main v2.6.0 registered
[ 17.865762] gspca: probing 046d:0896
[ 17.867240] vc032x: check sensor header 2c
[ 17.868985] usb 1-4: USB disconnect, address 2
[ 17.872937] vc032x: I2c Bus Busy Wait 2c
[ 17.872943] vc032x: I2c Bus Busy Wait 2c
[ 17.872945] vc032x: I2c Bus Busy Wait 2c
[ 17.872950] vc032x: I2c Bus Busy Wait 2c
[ 17.872954] vc032x: I2c Bus Busy Wait 2c
[ 17.872959] vc032x: I2c Bus Busy Wait 2c
[ 17.872964] vc032x: I2c Bus Busy Wait 2c
[ 17.872968] vc032x: I2c Bus Busy Wait 2c
[ 17.872973] vc032x: I2c Bus Busy Wait 2c
[ 17.872978] vc032x: I2c Bus Busy Wait 2c
[ 17.872982] vc032x: I2c Bus Busy Wait 2c
[ 17.872987] vc032x: I2c Bus Busy Wait 2c
[ 17.872992] vc032x: I2c Bus Busy Wait 2c
[ 17.872996] vc032x: I2c Bus Busy Wait 2c
[ 17.873001] vc032x: I2c Bus Busy Wait 2c
[ 17.873005] vc032x: I2c Bus Busy Wait 2c
[ 17.873010] vc032x: I2c Bus Busy Wait 2c
[ 17.873015] vc032x: I2c Bus Busy Wait 2c
[ 17.873017] vc032x: Unknown sensor...
[ 17.873030] vc032x: probe of 1-4:1.0 failed with error -22
[ 17.873073] usbcore: registered new interface driver vc032x
[ 17.873077] vc032x: registered
[ 17.881293] phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 17.915444] iwl3945 0000:05:00.0: firmware: requesting iwlwifi-3945-2.ucode
[ 17.982381] iwl3945 0000:05:00.0: loaded firmware version 15.32.2.9
[ 18.059463] Registered led device: iwl-phy0::radio
[ 18.059548] Registered led device: iwl-phy0::assoc
[ 18.059585] Registered led device: iwl-phy0::RX
[ 18.059610] Registered led device: iwl-phy0::TX
[ 18.078212] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 18.158615] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x230-0x237
[ 18.160672] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 18.161557] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 18.162272] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 18.163192] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 18.168054] usb 1-4: new high speed USB device using ehci_hcd and address 3
[ 18.283463] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x12a0b1, caps: 0xa04713/0x204000
[ 18.319143] type=1505 audit(1264577708.142:12): operation="profile_replace" pid=1268 name=/usr/share/gdm/guest-session/Xsession
[ 18.320462] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8
[ 18.321345] type=1505 audit(1264577708.146:13): operation="profile_replace" pid=1269 name=/sbin/dhclient3
[ 18.322226] type=1505 audit(1264577708.146:14): operation="profile_replace" pid=1269 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 18.322707] type=1505 audit(1264577708.146:15): operation="profile_replace" pid=1269 name=/usr/lib/connman/scripts/dhclient-script
[ 18.327907] type=1505 audit(1264577708.150:16): operation="profile_replace" pid=1270 name=/usr/bin/evince
[ 18.352272] type=1505 audit(1264577708.178:17): operation="profile_replace" pid=1270 name=/usr/bin/evince-previewer
[ 18.361302] type=1505 audit(1264577708.186:18): operation="profile_replace" pid=1270 name=/usr/bin/evince-thumbnailer
[ 18.363895] usb 1-4: configuration #1 chosen from 1 choice
[ 18.370602] gspca: probing 046d:0896
[ 18.370926] vc032x: check sensor header 2c
[ 18.373673] type=1505 audit(1264577708.198:19): operation="profile_replace" pid=1276 name=/usr/lib/cups/backend/cups-pdf
[ 18.374752] type=1505 audit(1264577708.198:20): operation="profile_replace" pid=1276 name=/usr/sbin/cupsd
[ 18.378925] type=1505 audit(1264577708.202:21): operation="profile_replace" pid=1277 name=/usr/sbin/tcpdump
[ 18.415875] vc032x: I2c Bus Busy Wait 2c
[ 18.456557] vc032x: I2c Bus Busy Wait 2c
[ 18.460676] vc032x: I2c Bus Busy Wait 2c
[ 18.500300] vc032x: I2c Bus Busy Wait 2c
[ 18.538701] vc032x: I2c Bus Busy Wait 2c
[ 18.577843] vc032x: I2c Bus Busy Wait 2c
[ 18.610798] vc032x: I2c Bus Busy Wait 2c
[ 18.648675] vc032x: I2c Bus Busy Wait 2c
[ 18.684551] vc032x: I2c Bus Busy Wait 2c
[ 18.720671] vc032x: I2c Bus Busy Wait 2c
[ 18.754042] vc032x: I2c Bus Busy Wait 2c
[ 18.798189] vc032x: I2c Bus Busy Wait 2c
[ 18.836281] vc032x: I2c Bus Busy Wait 2c
[ 18.874908] vc032x: I2c Bus Busy Wait 2c
[ 18.913277] vc032x: I2c Bus Busy Wait 2c
[ 18.952017] vc032x: I2c Bus Busy Wait 2c
[ 19.000167] vc032x: I2c Bus Busy Wait 2c
[ 19.066974] vc032x: I2c Bus Busy Wait 2c
[ 19.066978] vc032x: Unknown sensor...
[ 19.066998] vc032x: probe of 1-4:1.0 failed with error -22
[ 19.067077] usb 1-4: USB disconnect, address 3
[ 19.227733] ppdev: user-space parallel port driver
[ 19.318503] usb 1-4: new high speed USB device using ehci_hcd and address 4
Toute remarque est la bienvenue 😉
Personnellement, je soupçonne "hub" et "uhci_hcd" (voir vers le timing 2.66....); qu'en dites-vous?
