Ce site est optimisé pour être consulté depuis un navigateur moderne dans lequel JavaScript est activé.

pb de lecteur cd/dvd

jojorequin

bonjour a tous:)

voila mon pb, depuis mon passage a ubuntu 9.04, je ne peux plus me servir de mon lecteur cd/DVD.
il me dit d un ton pas tres "agreable" : mount: périphérique spécial /dev/scd0 n'existe pas :/

que dois je comprendre?

sur un autre topic (http://forum.ubuntu-fr.org/viewtopic.php?id=108589) quelqu un aurait resolu ce pb mais comment, là est la question?

🙁on me parle d activer le RAID dans le BIOS, alors excusez moi du peu, mais pour un debutant c est du martien.

sinon je deviens acros a ubuntu!:lol:

un peu d aide?

merci beaucoup:rolleyes:

P.S j espere que gonzolero sera de la partie

gonzolero

Salut jojorequin

En fait, je crois comprendre que ta version est karmic koala (9.04)
Vérifie bien la version que tu utilises, si c'est la 9.10, continuons ici, sinon il faut poster dans une autre rubrique... peut-être 'matériel' (problèmes matériel)

A titre indicatif, voici ma ligne consacrée au CDROM (fichier /etc/fstab)

/dev/scd0       /media/cdrom0   udf,iso9660 user,noauto,exec,utf8 0       0

Pour modifier le fichier :

$ sudo vim /etc/fstab [Entrée]
******* (mot de passe)
I (ou Inser)
Appliquer la modif
[Echap]
:
wq [Entrée]

gonzolero

Dans ton cas, ça m'étonnerait que ce soit un problème de raid activé car le CD/DVD fonctionnait avec la version précédente...

Edit : http://doc.ubuntu-fr.org//mount_fstab?redirect=1

jojorequin

merci pour ton aide;)

donc j etais sur la 9.04 puis je suis passé sur la 9.10 mais toujours le meme pb de lecteur, donc je suis passé sur la 10.04 sans succes pour mon pb.

quand a mon niveau sur linux, je suis plutot "nul", donc j ai su ouvrir le fichier "$ sudo vim /etc/fstab" puis mon mot de passe, mais quelle modif dois je appliquer et ou?

je sais, je suis pas un cadeau, encore desolé🙁

gonzolero

Autant pour moi, je voulais parler de la 10.04

Je suis moi-même plutôt un boulet et je n'ai pas de réponse à te proposer...
Regarde quand-même ici : http://doc.ubuntu-fr.org//mount_fstab?redirect=1
Avec des recherches comme celles-ci et un peu d'entaînement au terminal (ligne de commandes), tu y verras bientôt plus clair 🙂

Edit : concernant la modif dans /etc/fstab je ne sais pas si c'est nécessaire dans ton cas

La ligne

/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0

que j'utilise chez moi fonctionne. Je ne sais pas si elle peut faire l'affaire pour toi. Si oui, il suffirait de l'insérer dans /etc/fstab selon le mode d'emploi plus haut...

Mais c'est vrai que c'est pas évident au début...

gonzolero

Je cite http://doc.ubuntu-fr.org//mount_fstab?redirect=1 :

"Dossier cdrom0 inexistant

Il arrive que le répertoire /media/cdrom0 soit effacé. Dans ce cas, un mount renvoie une erreur explicite. Il est possible de le recréer tout simplement.

sudo mkdir /media/cdrom0
mount /media/cdrom0

jojorequin

rien ne fonctionne

cela fait plusieurs mois que ca dure et c est usant!:mad:
j ai deja mis plusieurs topic un peu partout sans resultats

il faut se rendre a l evidence : si dans les jours qui viennent je n ai toujours pas resolu ce pb, alors j abandonnerais linux et repartorais sur WIND....!
🙁
c est pas logique tout ca

encore merci a toi
🙁

jojorequin

heu...question

peut on revenir sur 8.10?

j ai bien le cd mais sans lecteur c est pas facile

:rolleyes:

gonzolero

Eh oui, je te comprends... Mais ne désespère pas : si ça marchait sur l'ancienne version et que le problème est apparu suite au passage à une version plus récente, ça marchera tôt ou tard. Il faut cerner ce problème spécifique...

As-tu essayé

sudo mkdir /media/cdrom0
mount /media/cdrom0

?

N'hésite pas à (re)faire des expériences à tête reposée...

Bon courage, à+

PS - Edit : Revenir sur sur 8.10 implique une réinstallation. Tu peux créer une iso bootable sur clé usb

Système/Administration/Créateur de disque de démarrage usb
(Il faut pour celà aller dans le bios et dire au premier périphérique de démarrage que c'est désormais l'USB).
Si ça marche, tu pourras à tout moment revenir sur cette modif.

Maisondouf

Je vais peut-être dire une bétise mais les lecteurs/graveurs CD/DVD ne sont pas déclarés dans fstab.

Dans le mien je n'ai que ça

# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# / was on /dev/sdb3 during installation
UUID=7f4641c8-e901-47c7-97e9-da30df424dc5 / ext4 errors=remount-ro 0 1
# swap was on /dev/sdb4 during installation
UUID=284501bf-b5c8-439f-9831-8696c0f8998e none swap sw 0 0

pourtant mon graveur et mon lecteur fonctionnent.

Ils sont déclarés comme périphérique /dev/sr0 et /dev/sr1 et ils se montent automatiquement (quelque part) lorsque on met un CD dedans.

Il faut d'abord savoir si ton lecteur est correctement reconnu, auquel cas tu dois avoir un périphérique /dev/sr0

Dans un terminal, tapes "ls /dev/sr*" pour voir.

Si il existe (le périphérique), tu mets un CD de données dans ton lecteur (genre ubuntu live) et tu tapes dans un terminal "sudo mount".

Tu devrais trouver un ligne qui ressemble à ça

/dev/sr0 on /media/CDROM type iso9660 (ro,nosuid,nodev,uhelper=devkit,uid=1000,gid=1000,iocharset=utf8,mode=0400,dmode=0500)

Si c'est le cas, le contenu du CD est accessible dans le répertoire /media/CDROM et tu devrais avoir un icône d'accès direct qui apparait sur le bureau.

Si t'as tout ça, c'est que tu n'as pas de problème mais évidement si tu est sur ce forum c'est que tu ne vas pas avoir tout ça !

Dis mois à quel niveau ça coince et on va pouvoir avancer.

nota: le répertoire /media/CDROM est virtuel, il n'y a pas besoin de le créer comme au bon vieux temps (c'est pour cela qu'il est en majuscules pour éviter les conflits)

jojorequin

bonjour a toi maisondouf:)

j ai suivi tes insrtuctions et voici le resultat pour : ls /dev/sr*

moi@moi:~$ ls /dev/sr*
ls: ne peut accéder /dev/sr*: Aucun fichier ou dossier de ce type

alors docteur c est grave?🙁

en attendant je pense repasser sur 8.10, en esperant que ce pb sera resolu bientot

merci a vous PUBLIQUE!:lol:

Maisondouf

pas excessivement grave, ton lecteur n'est pas correctement reconnu.

Faut rentrer dans la bête...

Envoi le résultat de "lshw", svp.

jojorequin

ok maisondouf:P

voila le "petit" resultat de ma becane :

moi@moi:~$ lshw
WARNING: you should run this program as super-user.
moi
description: Computer
width: 32 bits
*-core
description: Motherboard
physical id: 0
*-memory
description: System memory
physical id: 0
size: 497MiB
*-cpu
product: Intel(R) Pentium(R) M processor 1400MHz
vendor: Intel Corp.
physical id: 1
bus info: cpu@0
version: 6.9.5
size: 1400MHz
capacity: 1400MHz
width: 32 bits
capabilities: fpu fpu_exception wp vme de pse tsc msr mce cx8 mtrr pge mca cmov clflush dts acpi mmx fxsr sse sse2 tm pbe up bts est tm2 cpufreq
*-pci
description: Host bridge
product: 82855PM Processor to I/O Controller
vendor: Intel Corporation
physical id: 100
bus info: pci@0000:00:00.0
version: 03
width: 32 bits
clock: 33MHz
configuration: driver=agpgart-intel
resources: irq:0 memory:b0000000-b3ffffff(prefetchable)
*-pci:0
description: PCI bridge
product: 82855PM Processor to AGP Controller
vendor: Intel Corporation
physical id: 1
bus info: pci@0000:00:01.0
version: 03
width: 32 bits
clock: 66MHz
capabilities: pci bus_master
resources: ioport:c000(size=8192) memory:e0000000-efffffff memory:a0000000-afffffff(prefetchable)
*-display
description: VGA compatible controller
product: NV34M [GeForce FX Go5200 64M]
vendor: nVidia Corporation
physical id: 0
bus info: pci@0000:01:00.0
version: a1
width: 32 bits
clock: 66MHz
capabilities: bus_master cap_list rom
configuration: driver=nvidia latency=248 maxlatency=1 mingnt=5
resources: irq:10 memory:e1000000-e1ffffff memory:a0000000-a7ffffff(prefetchable) memory:a8000000-a801ffff(prefetchable)
*-usb:0
description: USB Controller
product: 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1
vendor: Intel Corporation
physical id: 1d
bus info: pci@0000:00:1d.0
version: 03
width: 32 bits
clock: 33MHz
capabilities: bus_master
configuration: driver=uhci_hcd latency=0
resources: irq:10 ioport:1200(size=32)
*-usb:1
description: USB Controller
product: 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2
vendor: Intel Corporation
physical id: 1d.1
bus info: pci@0000:00:1d.1
version: 03
width: 32 bits
clock: 33MHz
capabilities: bus_master
configuration: driver=uhci_hcd latency=0
resources: irq:11 ioport:1600(size=32)
*-usb:2
description: USB Controller
product: 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3
vendor: Intel Corporation
physical id: 1d.2
bus info: pci@0000:00:1d.2
version: 03
width: 32 bits
clock: 33MHz
capabilities: bus_master
configuration: driver=uhci_hcd latency=0
resources: irq:11 ioport:1700(size=32)
*-usb:3
description: USB Controller
product: 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller
vendor: Intel Corporation
physical id: 1d.7
bus info: pci@0000:00:1d.7
version: 03
width: 32 bits
clock: 33MHz
capabilities: bus_master cap_list
configuration: driver=ehci_hcd latency=0
resources: irq:11 memory:f0000000-f00003ff
*-pci:1
description: PCI bridge
product: 82801 Mobile PCI Bridge
vendor: Intel Corporation
physical id: 1e
bus info: pci@0000:00:1e.0
version: 83
width: 32 bits
clock: 33MHz
capabilities: pci bus_master
resources: ioport:a000(size=8192) memory:d0000000-dfffffff memory:90000000-9fffffff(prefetchable)
*-network:0 DISABLED
description: Wireless interface
product: PRO/Wireless LAN 2100 3B Mini PCI Adapter
vendor: Intel Corporation
physical id: 1
bus info: pci@0000:02:01.0
logical name: eth1
version: 04
serial: 00:04:23:80:41:25
width: 32 bits
clock: 33MHz
capabilities: bus_master cap_list ethernet physical wireless
configuration: broadcast=yes driver=ipw2100 driverversion=git-1.2.2 firmware=712.0.3:3:00000001 latency=128 maxlatency=34 mingnt=2 multicast=yes wireless=unassociated
resources: irq:11 memory:d0009000-d0009fff
*-network:1
description: Ethernet interface
product: RTL-8139/8139C/8139C+
vendor: Realtek Semiconductor Co., Ltd.
physical id: 2
bus info: pci@0000:02:02.0
logical name: eth0
version: 10
serial: 00:40:d0:50:5c:75
width: 32 bits
clock: 33MHz
capabilities: bus_master cap_list ethernet physical
configuration: broadcast=yes driver=8139too driverversion=0.9.28 ip=192.168.2.100 latency=128 maxlatency=64 mingnt=32 multicast=yes
resources: irq:11 ioport:a000(size=256) memory:d0008000-d00080ff
*-pcmcia
description: CardBus bridge
product: PCI4510 PC card Cardbus Controller
vendor: Texas Instruments
physical id: 3
bus info: pci@0000:02:03.0
version: 02
width: 32 bits
clock: 33MHz
capabilities: pcmcia bus_master cap_list
configuration: driver=yenta_cardbus latency=176 maxlatency=5 mingnt=192
resources: irq:11 memory:d0001000-d0001fff ioport:a400(size=256) ioport:a800(size=256) memory:90000000-93ffffff(prefetchable) memory:d4000000-d7ffffff
*-firewire
description: FireWire (IEEE 1394)
product: PCI4510 IEEE-1394 Controller
vendor: Texas Instruments
physical id: 3.1
bus info: pci@0000:02:03.1
version: 00
width: 32 bits
clock: 33MHz
capabilities: bus_master cap_list
configuration: driver=ohci1394 latency=128 maxlatency=4 mingnt=2
resources: irq:11 memory:d0000000-d00007ff memory:d0004000-d0007fff
*-isa
description: ISA bridge
product: 82801DBM (ICH4-M) LPC Interface Bridge
vendor: Intel Corporation
physical id: 1f
bus info: pci@0000:00:1f.0
version: 03
width: 32 bits
clock: 33MHz
capabilities: isa bus_master
configuration: latency=0
*-ide
description: IDE interface
product: 82801DBM (ICH4-M) IDE Controller
vendor: Intel Corporation
physical id: 1f.1
bus info: pci@0000:00:1f.1
version: 03
width: 32 bits
clock: 33MHz
capabilities: ide bus_master
configuration: driver=ata_piix latency=0
resources: irq:11 ioport:1f0(size=8) ioport:3f6 ioport:170(size=8) ioport:376 ioport:1100(size=16) memory:20000000-200003ff
*-serial UNCLAIMED
description: SMBus
product: 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller
vendor: Intel Corporation
physical id: 1f.3
bus info: pci@0000:00:1f.3
version: 03
width: 32 bits
clock: 33MHz
configuration: latency=0
resources: ioport:1400(size=32)
*-multimedia
description: Multimedia audio controller
product: 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller
vendor: Intel Corporation
physical id: 1f.5
bus info: pci@0000:00:1f.5
version: 03
width: 32 bits
clock: 33MHz
capabilities: bus_master cap_list
configuration: driver=Intel ICH latency=0
resources: irq:5 ioport:e000(size=256) ioport:e100(size=64) memory:f0000400-f00005ff memory:f0000600-f00006ff
*-communication UNCLAIMED
description: Modem
product: 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller
vendor: Intel Corporation
physical id: 1f.6
bus info: pci@0000:00:1f.6
version: 03
width: 32 bits
clock: 33MHz
capabilities: cap_list
configuration: latency=0
resources: ioport:e200(size=256) ioport:e300(size=128)
moi@moi:~$

dis moi un peu, quelle langue tu parles? parceque moi pas comprendre un mot de tout ca.

aller courage
:lol:

Maisondouf

C'etait pour savoir si ton contrôleur disque était SATA ou IDE

Et ça me dit que tu as un contrôleur IDE Intel 82801DBM.

Un truc tout à fait courrant.

Maisondouf

tu vas relancer le PC et juste après tu ouvres un terminal et tu tapes

dmesg >toto

puis (par les menus) Raccourcis->Dossier personnel, ça ouvre le navigateur dans ton /home

Tu cherches le fichier 'toto' et tu l'ouvres avec gedit.

Tu fais une recherche (la loupe en haut) de "scsi".

Tu devrais avoir une ligne

SCSI subsystem initialized

suivie de

libata version 3.00 loaded.

si c'est le cas, tu poursuis la recherche plus bas et tu devrais tomber sur un truc comme ça

[ 0.899654] pata_via 0000:00:0f.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.899918] scsi0 : pata_via
[ 0.900060] scsi1 : pata_via
[ 0.902815] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[ 0.902819] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15

Si c'est ressemblant et qu'il n'y a pas d'erreur, ton contrôleur est bien reconnu (il se peut que tu n'en ais que un seul)

Après tu continues la recherche et la logique voudrait que tu trouves une ligne à peu près comme ça

[ 1.301690] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S202J SB02 PQ: 0 ANSI: 5
[ 1.305070] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray

mais évidement, dans ton cas il doit y avoir des erreurs avant.

si c'est le cas envoie le fichier 'toto'

jojorequin

voila voila on avance:P

donc j ai tout bien trouvé ce que tu me demande sauf la derniere ligne

[ 1.305070] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray

alors je t envois mon toto ( c est pas mal ca comme nom...)😃

eh les gars, petit a petit on devient moins .... ben... moins petit!:rolleyes:

jojorequin

oups j oublié mon toto ::/

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-16-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-3ubuntu1) ) #25-Ubuntu SMP Tue Mar 9 16:33:52 UTC 2010 (Ubuntu 2.6.32-16.25-generic)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
[ 0.000000] BIOS-e820: 000000001fff0000 - 000000001fffffc0 (ACPI data)
[ 0.000000] BIOS-e820: 000000001fffffc0 - 0000000020000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.3 present.
[ 0.000000] last_pfn = 0x1fff0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FE0000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable)
[ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 000000000009fc00 (usable)
[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000001fff0000 (usable)
[ 0.000000] modified: 000000001fff0000 - 000000001fffffc0 (ACPI data)
[ 0.000000] modified: 000000001fffffc0 - 0000000020000000 (ACPI NVS)
[ 0.000000] modified: 00000000ffb80000 - 00000000ffc00000 (reserved)
[ 0.000000] modified: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-000000001fff0000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 001fc00000 page 2M
[ 0.000000] 001fc00000 - 001fff0000 page 4k
[ 0.000000] kernel direct mapping tables up to 1fff0000 @ 7000-c000
[ 0.000000] RAMDISK: 1f898000 - 1ffdf5e9
[ 0.000000] ACPI: RSDP 000e6010 00014 (v00 INSYDE)
[ 0.000000] ACPI: RSDT 1fffb246 00034 (v01 INSYDE RSDT_000 00000001 _ISC 00010106)
[ 0.000000] ACPI: FACP 1ffffb00 00074 (v01 INSYDE FACP_000 00000100 _ISC 00010106)
[ 0.000000] ACPI: DSDT 1fffb6b0 0444E (v01 INSYDE Canyon 00001004 INTL 02002036)
[ 0.000000] ACPI: FACS 1fffffc0 00040
[ 0.000000] ACPI: BOOT 1ffffb90 00028 (v01 INSYDE SYS_BOOT 00000100 _ISC 00010106)
[ 0.000000] ACPI: DBGP 1ffffbc0 00034 (v01 INSYDE DBGP_000 00000100 _ISC 00010106)
[ 0.000000] ACPI: SSDT 1fffb27a 00258 (v01 INTEL EISTRef 00002000 INTL 20021002)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 511MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 1fff0000
[ 0.000000] low ram: 0 - 1fff0000
[ 0.000000] node 0 low ram: 00000000 - 1fff0000
[ 0.000000] node 0 bootmap 00008000 - 0000c000
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 001fff0000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008fee18] TEXT DATA BSS ==> [0000100000 - 00008fee18]
[ 0.000000] #4 [001f898000 - 001ffdf5e9] RAMDISK ==> [001f898000 - 001ffdf5e9]
[ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #6 [00008ff000 - 00009021a4] BRK ==> [00008ff000 - 00009021a4]
[ 0.000000] #7 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
[ 0.000000] #8 [0000008000 - 000000c000] BOOTMAP ==> [0000008000 - 000000c000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0001fff0
[ 0.000000] HighMem 0x0001fff0 -> 0x0001fff0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000002
[ 0.000000] 0: 0x00000006 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0001fff0
[ 0.000000] On node 0 totalpages: 130955
[ 0.000000] free_area_init_node: node 0, pgdat c07bc480, node_mem_map c1001000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3963 pages, LIFO batch:0
[ 0.000000] Normal zone: 992 pages used for memmap
[ 0.000000] Normal zone: 125968 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] APIC: disable apic facility
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 20000000 (gap: 20000000:dfb80000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c1800000 s35928 r0 d21416 u4194304
[ 0.000000] pcpu-alloc: s35928 r0 d21416 u4194304 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129931
[ 0.000000] Kernel command line: root=UUID=60913aa0-5c9d-4a8d-be10-1d17b5addf0f ro quiet splash
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 2621120 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 500672k/524224k available (4747k kernel code, 22816k reserved, 2191k data, 660k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xe07f0000 - 0xff7fe000 ( 496 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)
[ 0.000000] .init : 0xc07c7000 - 0xc086c000 ( 660 kB)
[ 0.000000] .data : 0xc05a2d23 - 0xc07c6b28 (2191 kB)
[ 0.000000] .text : 0xc0100000 - 0xc05a2d23 (4747 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304 nr_irqs:256
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1394.430 MHz processor.
[ 0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 2788.86 BogoMIPS (lpj=5577720)
[ 0.004031] Security Framework initialized
[ 0.004066] AppArmor: AppArmor initialized
[ 0.004076] Mount-cache hash table entries: 512
[ 0.004248] Initializing cgroup subsys ns
[ 0.004254] Initializing cgroup subsys cpuacct
[ 0.004260] Initializing cgroup subsys memory
[ 0.004272] Initializing cgroup subsys devices
[ 0.004276] Initializing cgroup subsys freezer
[ 0.004280] Initializing cgroup subsys net_cls
[ 0.004310] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004314] CPU: L2 cache: 1024K
[ 0.004320] mce: CPU supports 5 MCE banks
[ 0.004338] Performance Events:
[ 0.004342] no APIC, boot with the "lapic" boot parameter to force-enable it.
[ 0.004345] no hardware sampling interrupt available.
[ 0.004349] p6 PMU driver.
[ 0.004369] ... version: 0
[ 0.004372] ... bit width: 32
[ 0.004375] ... generic registers: 2
[ 0.004378] ... value mask: 00000000ffffffff
[ 0.004381] ... max period: 000000007fffffff
[ 0.004384] ... fixed-purpose events: 0
[ 0.004387] ... event mask: 0000000000000003
[ 0.004393] Checking 'hlt' instruction... OK.
[ 0.021126] SMP alternatives: switching to UP code
[ 0.030682] Freeing SMP alternatives: 19k freed
[ 0.030696] ACPI: Core revision 20090903
[ 0.039734] ACPI: setting ELCR to 0200 (from 0c20)
[ 0.040009] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.040016] ftrace: allocating 22170 entries in 44 pages
[ 0.044131] weird, boot CPU (#0) not listed by the BIOS.
[ 0.044137] SMP motherboard not detected.
[ 0.044140] Local APIC not detected. Using dummy APIC emulation.
[ 0.044143] SMP disabled
[ 0.048172] Brought up 1 CPUs
[ 0.048178] Total of 1 processors activated (2788.86 BogoMIPS).
[ 0.049533] CPU0 attaching NULL sched-domain.
[ 0.049728] devtmpfs: initialized
[ 0.050311] regulator: core version 0.5
[ 0.050338] Time: 15:04:29 Date: 03/14/10
[ 0.050405] NET: Registered protocol family 16
[ 0.050570] EISA bus registered
[ 0.050582] ACPI: bus type pci registered
[ 0.050737] PCI: PCI BIOS revision 2.10 entry at 0xe99e4, last bus=2
[ 0.050740] PCI: Using configuration type 1 for base access
[ 0.052233] bio: create slab <bio-0> at 0
[ 0.053009] ACPI: EC: Look up EC in DSDT
[ 0.056889] ACPI: Interpreter enabled
[ 0.056900] ACPI: (supports S0 S3 S4 S5)
[ 0.056930] ACPI: Using PIC for interrupt routing
[ 0.062746] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
[ 0.062805] ACPI: Power Resource [PUT2] (on)
[ 0.062992] ACPI: No dock devices found.
[ 0.063317] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.063372] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xb0000000-0xb3ffffff]
[ 0.063496] pci 0000:00:1d.0: reg 20 io port: [0x1200-0x121f]
[ 0.063553] pci 0000:00:1d.1: reg 20 io port: [0x1600-0x161f]
[ 0.063609] pci 0000:00:1d.2: reg 20 io port: [0x1700-0x171f]
[ 0.063674] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf0000000-0xf00003ff]
[ 0.063734] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.063740] pci 0000:00:1d.7: PME# disabled
[ 0.063835] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
[ 0.063841] pci 0000:00:1f.0: quirk: region 1300-133f claimed by ICH4 GPIO
[ 0.063867] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.063875] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.063883] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[ 0.063891] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[ 0.063900] pci 0000:00:1f.1: reg 20 io port: [0x1100-0x110f]
[ 0.063908] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
[ 0.063962] pci 0000:00:1f.3: reg 20 io port: [0x1400-0x141f]
[ 0.064021] pci 0000:00:1f.5: reg 10 io port: [0xe000-0xe0ff]
[ 0.064029] pci 0000:00:1f.5: reg 14 io port: [0xe100-0xe13f]
[ 0.064037] pci 0000:00:1f.5: reg 18 32bit mmio: [0xf0000400-0xf00005ff]
[ 0.064045] pci 0000:00:1f.5: reg 1c 32bit mmio: [0xf0000600-0xf00006ff]
[ 0.064077] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
[ 0.064082] pci 0000:00:1f.5: PME# disabled
[ 0.064115] pci 0000:00:1f.6: reg 10 io port: [0xe200-0xe2ff]
[ 0.064123] pci 0000:00:1f.6: reg 14 io port: [0xe300-0xe37f]
[ 0.064163] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[ 0.064168] pci 0000:00:1f.6: PME# disabled
[ 0.064207] pci 0000:01:00.0: reg 10 32bit mmio: [0xe1000000-0xe1ffffff]
[ 0.064215] pci 0000:01:00.0: reg 14 32bit mmio pref: [0xa0000000-0xa7ffffff]
[ 0.064235] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[ 0.064290] pci 0000:00:01.0: bridge io port: [0xc000-0xdfff]
[ 0.064295] pci 0000:00:01.0: bridge 32bit mmio: [0xe0000000-0xefffffff]
[ 0.064300] pci 0000:00:01.0: bridge 32bit mmio pref: [0xa0000000-0xafffffff]
[ 0.064339] pci 0000:02:01.0: reg 10 32bit mmio: [0xd0009000-0xd0009fff]
[ 0.064419] pci 0000:02:02.0: reg 10 io port: [0xa000-0xa0ff]
[ 0.064427] pci 0000:02:02.0: reg 14 32bit mmio: [0xd0008000-0xd00080ff]
[ 0.064469] pci 0000:02:02.0: supports D1 D2
[ 0.064472] pci 0000:02:02.0: PME# supported from D1 D2 D3hot D3cold
[ 0.064477] pci 0000:02:02.0: PME# disabled
[ 0.064513] pci 0000:02:03.0: reg 10 32bit mmio: [0x000000-0x000fff]
[ 0.064533] pci 0000:02:03.0: supports D1 D2
[ 0.064536] pci 0000:02:03.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.064542] pci 0000:02:03.0: PME# disabled
[ 0.064577] pci 0000:02:03.1: reg 10 32bit mmio: [0xd0000000-0xd00007ff]
[ 0.064585] pci 0000:02:03.1: reg 14 32bit mmio: [0xd0004000-0xd0007fff]
[ 0.064628] pci 0000:02:03.1: supports D1 D2
[ 0.064631] pci 0000:02:03.1: PME# supported from D0 D1 D2 D3hot
[ 0.064636] pci 0000:02:03.1: PME# disabled
[ 0.064685] pci 0000:00:1e.0: transparent bridge
[ 0.064690] pci 0000:00:1e.0: bridge io port: [0xa000-0xbfff]
[ 0.064696] pci 0000:00:1e.0: bridge 32bit mmio: [0xd0000000-0xdfffffff]
[ 0.064702] pci 0000:00:1e.0: bridge 32bit mmio pref: [0x90000000-0x9fffffff]
[ 0.064731] pci_bus 0000:00: on NUMA node 0
[ 0.064737] ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT]
[ 0.064803] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.PCI1._PRT]
[ 0.064834] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.PCI2._PRT]
[ 0.068750] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 5 7 9 *10 11)
[ 0.068892] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *5 7 9 10 11)
[ 0.069031] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 5 7 9 10 *11)
[ 0.069169] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 5 7 *11)
[ 0.069299] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 *11)
[ 0.069421] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 5 7 9 10 *11)
[ 0.069530] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 14 15) *0, disabled.
[ 0.069657] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 5 7 9 10 *11)
[ 0.069791] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.069797] vgaarb: loaded
[ 0.069968] SCSI subsystem initialized
[ 0.070038] libata version 3.00 loaded.
[ 0.070135] usbcore: registered new interface driver usbfs
[ 0.070154] usbcore: registered new interface driver hub
[ 0.070188] usbcore: registered new device driver usb
[ 0.070375] ACPI: WMI: Mapper loaded
[ 0.070378] PCI: Using ACPI for IRQ routing
[ 0.070573] NetLabel: Initializing
[ 0.070576] NetLabel: domain hash size = 128
[ 0.070579] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.070599] NetLabel: unlabeled traffic allowed by default
[ 0.070638] Switching to clocksource tsc
[ 0.072001] AppArmor: AppArmor Filesystem Enabled
[ 0.072001] pnp: PnP ACPI init
[ 0.072001] ACPI: bus type pnp registered
[ 0.074304] pnp: PnP ACPI: found 12 devices
[ 0.074308] ACPI: ACPI bus type pnp unregistered
[ 0.074315] PnPBIOS: Disabled by ACPI PNP
[ 0.074335] system 00:05: iomem range 0xfff00000-0xfff7ffff has been reserved
[ 0.074340] system 00:05: iomem range 0xfff80000-0xffffffff has been reserved
[ 0.074349] system 00:07: ioport range 0x680-0x6ff has been reserved
[ 0.074354] system 00:07: ioport range 0x200-0x20f has been reserved
[ 0.074358] system 00:07: ioport range 0x1000-0x107f has been reserved
[ 0.074362] system 00:07: ioport range 0x1300-0x133f has been reserved
[ 0.109132] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.109138] pci 0000:00:01.0: IO window: 0xc000-0xdfff
[ 0.109144] pci 0000:00:01.0: MEM window: 0xe0000000-0xefffffff
[ 0.109149] pci 0000:00:01.0: PREFETCH window: 0xa0000000-0xafffffff
[ 0.109160] pci 0000:02:03.0: CardBus bridge, secondary bus 0000:03
[ 0.109164] pci 0000:02:03.0: IO window: 0x00a400-0x00a4ff
[ 0.109170] pci 0000:02:03.0: IO window: 0x00a800-0x00a8ff
[ 0.109176] pci 0000:02:03.0: PREFETCH window: 0x90000000-0x93ffffff
[ 0.109181] pci 0000:02:03.0: MEM window: 0xd4000000-0xd7ffffff
[ 0.109187] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
[ 0.109192] pci 0000:00:1e.0: IO window: 0xa000-0xbfff
[ 0.109199] pci 0000:00:1e.0: MEM window: 0xd0000000-0xdfffffff
[ 0.109204] pci 0000:00:1e.0: PREFETCH window: 0x90000000-0x9fffffff
[ 0.109225] pci 0000:00:1e.0: setting latency timer to 64
[ 0.109478] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[ 0.109482] PCI: setting IRQ 11 as level-triggered
[ 0.109489] pci 0000:02:03.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 0.109498] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.109502] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.109506] pci_bus 0000:01: resource 0 io: [0xc000-0xdfff]
[ 0.109510] pci_bus 0000:01: resource 1 mem: [0xe0000000-0xefffffff]
[ 0.109514] pci_bus 0000:01: resource 2 pref mem [0xa0000000-0xafffffff]
[ 0.109519] pci_bus 0000:02: resource 0 io: [0xa000-0xbfff]
[ 0.109523] pci_bus 0000:02: resource 1 mem: [0xd0000000-0xdfffffff]
[ 0.109527] pci_bus 0000:02: resource 2 pref mem [0x90000000-0x9fffffff]
[ 0.109531] pci_bus 0000:02: resource 3 io: [0x00-0xffff]
[ 0.109535] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
[ 0.109539] pci_bus 0000:03: resource 0 io: [0xa400-0xa4ff]
[ 0.109543] pci_bus 0000:03: resource 1 io: [0xa800-0xa8ff]
[ 0.109547] pci_bus 0000:03: resource 2 pref mem [0x90000000-0x93ffffff]
[ 0.109551] pci_bus 0000:03: resource 3 mem: [0xd4000000-0xd7ffffff]
[ 0.109609] NET: Registered protocol family 2
[ 0.109759] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.110213] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.110365] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.110513] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.110517] TCP reno registered
[ 0.110625] NET: Registered protocol family 1
[ 0.110730] pci 0000:01:00.0: Boot video device
[ 0.110852] Simple Boot Flag at 0x37 set to 0x1
[ 0.110954] cpufreq-nforce2: No nForce2 chipset.
[ 0.110986] Scanning for low memory corruption every 60 seconds
[ 0.111165] audit: initializing netlink socket (disabled)
[ 0.111187] type=2000 audit(1268579068.109:1): initialized
[ 0.126717] Trying to unpack rootfs image as initramfs...
[ 0.145405] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.148036] VFS: Disk quotas dquot_6.5.2
[ 0.148141] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.153702] fuse init (API version 7.13)
[ 0.153876] msgmni has been set to 978
[ 0.154236] alg: No test for stdrng (krng)
[ 0.154253] io scheduler noop registered
[ 0.154256] io scheduler anticipatory registered
[ 0.154259] io scheduler deadline registered
[ 0.154342] io scheduler cfq registered (default)
[ 0.154534] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.154567] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.155205] ACPI: AC Adapter [AC] (on-line)
[ 0.155318] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.155547] ACPI: Lid Switch [LID]
[ 0.155614] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 0.155622] ACPI: Sleep Button [SLPB]
[ 0.155699] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.155703] ACPI: Power Button [PWRF]
[ 0.155992] Marking TSC unstable due to TSC halts in idle
[ 0.156043] processor LNXCPU:00: registered as cooling_device0
[ 0.165350] Switching to clocksource acpi_pm
[ 0.165403] isapnp: Scanning for PnP cards...
[ 0.171267] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.171412] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
[ 0.177751] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
[ 0.177757] PCI: setting IRQ 5 as level-triggered
[ 0.177764] serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
[ 0.177775] serial 0000:00:1f.6: PCI INT B disabled
[ 0.179268] brd: module loaded
[ 0.179969] loop: module loaded
[ 0.180067] ACPI: Battery Slot [BAT0] (battery present)
[ 0.181946] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[ 0.182170] ata_piix 0000:00:1f.1: version 2.13
[ 0.182184] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
[ 0.182194] ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 0.182255] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.188378] scsi0 : ata_piix
[ 0.232117] scsi1 : ata_piix
[ 0.233368] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1100 irq 14
[ 0.233373] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1108 irq 15
[ 0.234691] Fixed MDIO Bus: probed
[ 0.234747] PPP generic driver version 2.4.2
[ 0.234855] tun: Universal TUN/TAP device driver, 1.6
[ 0.234859] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.235004] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.235246] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
[ 0.235253] ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11
[ 0.235275] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.235280] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.235330] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.235372] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.239265] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.244581] ehci_hcd 0000:00:1d.7: irq 11, io mem 0xf0000000
[ 0.260347] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.260562] usb usb1: configuration #1 chosen from 1 choice
[ 0.260611] hub 1-0:1.0: USB hub found
[ 0.260629] hub 1-0:1.0: 6 ports detected
[ 0.260733] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.260779] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.261167] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[ 0.261171] PCI: setting IRQ 10 as level-triggered
[ 0.261178] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10
[ 0.261192] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.261197] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.261264] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.261299] uhci_hcd 0000:00:1d.0: irq 10, io base 0x00001200
[ 0.261449] usb usb2: configuration #1 chosen from 1 choice
[ 0.261489] hub 2-0:1.0: USB hub found
[ 0.261499] hub 2-0:1.0: 2 ports detected
[ 0.261767] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 0.261772] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 0.261780] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.261784] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.261836] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.261860] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001600
[ 0.262006] usb usb3: configuration #1 chosen from 1 choice
[ 0.262049] hub 3-0:1.0: USB hub found
[ 0.262059] hub 3-0:1.0: 2 ports detected
[ 0.262113] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 0.262121] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.262125] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.262168] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.262192] uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001700
[ 0.262336] usb usb4: configuration #1 chosen from 1 choice
[ 0.262379] hub 4-0:1.0: USB hub found
[ 0.262389] hub 4-0:1.0: 2 ports detected
[ 0.262519] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.267374] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 0.278328] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.278349] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.278410] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.278448] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.278479] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.278688] mice: PS/2 mouse device common for all mice
[ 0.278951] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.278996] rtc0: alarms up to one month, 242 bytes nvram
[ 0.279240] device-mapper: uevent: version 1.0.3
[ 0.280263] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 0.282313] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 0.282459] device-mapper: multipath: version 1.1.0 loaded
[ 0.282464] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.286456] EISA: Probing bus 0 at eisa.0
[ 0.286467] Cannot allocate resource for EISA slot 1
[ 0.286498] EISA: Detected 0 cards.
[ 0.286641] cpuidle: using governor ladder
[ 0.286709] cpuidle: using governor menu
[ 0.287477] TCP cubic registered
[ 0.287758] NET: Registered protocol family 10
[ 0.289213] lo: Disabled Privacy Extensions
[ 0.290092] NET: Registered protocol family 17
[ 0.290424] Using IPI No-Shortcut mode
[ 0.290566] PM: Resume from disk failed.
[ 0.290586] registered taskstats version 1
[ 0.290895] Magic number: 2:137:83
[ 0.291040] rtc_cmos 00:03: setting system clock to 2010-03-14 15:04:29 UTC (1268579069)
[ 0.291045] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.291047] EDD information not available.
[ 0.442839] ata1.00: ATA-8: SAMSUNG HM160HC, LQ100-10, max UDMA/100
[ 0.442846] ata1.00: 312581808 sectors, multi 16: LBA48
[ 0.458653] ata1.00: configured for UDMA/100
[ 0.790307] Freeing initrd memory: 7453k freed
[ 0.846648] isapnp: No Plug & Play device found
[ 0.846929] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM160HC LQ10 PQ: 0 ANSI: 5
[ 0.847229] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 0.847324] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 0.847390] sd 0:0:0:0: [sda] Write Protect is off
[ 0.847394] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.847428] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.847649] sda: sda1 sda2 < sda5 >
[ 0.919092] sd 0:0:0:0: [sda] Attached SCSI disk
[ 0.919118] Freeing unused kernel memory: 660k freed
[ 0.919941] Write protecting the kernel text: 4748k
[ 0.920002] Write protecting the kernel read-only data: 1884k
[ 0.939708] udev: starting version 151
[ 1.250919] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 1.251086] 8139cp 0000:02:02.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ 1.259760] ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11
[ 1.259768] ohci1394 0000:02:03.1: PCI INT B -> Link[LNKF] -> GSI 11 (level, low) -> IRQ 11
[ 1.260310] 8139too Fast Ethernet driver 0.9.28
[ 1.294160] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 1.294166] EXT3-fs: write access will be enabled during recovery.
[ 1.316065] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11] MMIO=[d0000000-d00007ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 1.316326] 8139too 0000:02:02.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 1.317674] eth0: RealTek RTL8139 at 0xa000, 00:40:d0:50:5c:75, IRQ 11
[ 1.378681] kjournald starting. Commit interval 5 seconds
[ 1.378702] EXT3-fs: recovery complete.
[ 1.379133] EXT3-fs: mounted filesystem with ordered data mode.
[ 2.588239] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0040d001001c4526]
[ 19.011366] Adding 1502036k swap on /dev/sda5. Priority:-1 extents:1 across:1502036k
[ 19.030250] udev: starting version 151
[ 19.397511] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 19.430218] lp: driver loaded but no devices found
[ 19.483505] Linux agpgart interface v0.103
[ 19.511729] intel_rng: FWH not detected
[ 19.533898] parport_pc 00:0a: reported by Plug and Play ACPI
[ 19.533932] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[ 19.592337] EXT3 FS on sda1, internal journal
[ 19.604752] irda_init()
[ 19.604776] NET: Registered protocol family 23
[ 19.626164] agpgart-intel 0000:00:00.0: Intel 855PM Chipset
[ 19.630140] lp0: using parport0 (interrupt-driven).
[ 19.642539] type=1505 audit(1268579088.848:2): operation="profile_load" pid=457 name="/sbin/dhclient3"
[ 19.643419] type=1505 audit(1268579088.848:3): operation="profile_load" pid=457 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 19.674388] type=1505 audit(1268579088.881:4): operation="profile_load" pid=457 name="/usr/lib/connman/scripts/dhclient-script"
[ 19.676466] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:00/LNXVIDEO:00/input/input5
[ 19.676642] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 19.686045] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xb0000000
[ 19.704733] lib80211: common routines for IEEE802.11 drivers
[ 19.704739] lib80211_crypt: registered algorithm 'NULL'
[ 19.723970] ppdev: user-space parallel port driver
[ 19.743831] vga16fb: initializing
[ 19.743838] vga16fb: mapped to 0xc00a0000
[ 19.744070] fb0: VGA16 VGA frame buffer device
[ 19.744415] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 0.
[ 19.744487] nsc-ircc, chip->init
[ 19.744498] nsc-ircc, Found chip at base=0x02e
[ 19.744524] nsc-ircc, driver loaded (Dag Brattli)
[ 19.744740] nsc_ircc_open(), can't get iobase of 0x2f8
[ 19.744771] nsc-ircc, Found chip at base=0x02e
[ 19.744797] nsc-ircc, driver loaded (Dag Brattli)
[ 19.744802] nsc_ircc_open(), can't get iobase of 0x2f8
[ 19.745173] nsc-ircc 00:0b: disabled
[ 19.817920] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 19.817926] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[ 19.979640] nvidia: module license 'NVIDIA' taints kernel.
[ 19.979647] Disabling lock debugging due to kernel taint
[ 20.700221] type=1505 audit(1268579089.908:5): operation="profile_load" pid=578 name="/usr/share/gdm/guest-session/Xsession"
[ 20.705995] type=1505 audit(1268579089.912:6): operation="profile_replace" pid=579 name="/sbin/dhclient3"
[ 20.706880] type=1505 audit(1268579089.912:7): operation="profile_replace" pid=579 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 20.707370] type=1505 audit(1268579089.912:8): operation="profile_replace" pid=579 name="/usr/lib/connman/scripts/dhclient-script"
[ 20.740607] type=1505 audit(1268579089.948:9): operation="profile_load" pid=584 name="/usr/bin/evince"
[ 20.757438] Synaptics Touchpad, model: 1, fw: 5.9, id: 0xa54ab1, caps: 0x804713/0x0
[ 20.792779] type=1505 audit(1268579090.000:10): operation="profile_load" pid=584 name="/usr/bin/evince-previewer"
[ 20.796981] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input6
[ 20.823415] type=1505 audit(1268579090.028:11): operation="profile_load" pid=584 name="/usr/bin/evince-thumbnailer"
[ 20.828730] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[ 21.200166] ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2
[ 21.200172] ipw2100: Copyright(c) 2003-2006 Intel Corporation
[ 21.214917] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
[ 21.214926] ipw2100 0000:02:01.0: PCI INT A -> Link[LNKE] -> GSI 11 (level, low) -> IRQ 11
[ 21.215734] ipw2100: Detected Intel PRO/Wireless 2100 Network Connection
[ 21.215760] ipw2100 0000:02:01.0: firmware: requesting ipw2100-1.3.fw
[ 21.462532] eth1: Radio is disabled by RF switch.
[ 21.596289] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 21.596293] apm: overridden by ACPI.
[ 21.667906] yenta_cardbus 0000:02:03.0: CardBus bridge found [1071:8160]
[ 21.667926] yenta_cardbus 0000:02:03.0: Enabling burst memory read transactions
[ 21.667931] yenta_cardbus 0000:02:03.0: Using CSCINT to route CSC interrupts to PCI
[ 21.667934] yenta_cardbus 0000:02:03.0: Routing CardBus interrupts to PCI
[ 21.667941] yenta_cardbus 0000:02:03.0: TI: mfunc 0x01001c22, devctl 0x64
[ 21.786806] Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
[ 21.786865] Intel ICH 0000:00:1f.5: setting latency timer to 64
[ 21.823794] Console: switching to colour frame buffer device 80x30
[ 21.888809] nvidia 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10
[ 21.890227] NVRM: loading NVIDIA UNIX x86 Kernel Module 173.14.22 Sun Nov 8 20:26:31 PST 2009
[ 21.896481] yenta_cardbus 0000:02:03.0: ISA IRQ mask 0x0050, PCI irq 11
[ 21.896488] yenta_cardbus 0000:02:03.0: Socket status: 30000086
[ 21.896494] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #02 to #06
[ 21.896509] yenta_cardbus 0000:02:03.0: pcmcia: parent PCI bridge I/O window: 0xa000 - 0xbfff
[ 21.896514] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa000-0xbfff: clean.
[ 21.897104] yenta_cardbus 0000:02:03.0: pcmcia: parent PCI bridge Memory window: 0xd0000000 - 0xdfffffff
[ 21.897109] yenta_cardbus 0000:02:03.0: pcmcia: parent PCI bridge Memory window: 0x90000000 - 0x9fffffff
[ 22.225067] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[ 22.226813] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 22.227599] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 22.228798] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 22.229651] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 22.624050] intel8x0_measure_ac97_clock: measured 55047 usecs (2652 samples)
[ 22.624056] intel8x0: clocking to 48000
[ 22.710622] agpgart-intel 0000:00:00.0: AGP 2.0 bridge
[ 22.710640] agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
[ 22.710682] nvidia 0000:01:00.0: putting AGP V2 device into 4x mode
[ 25.559898] serial8250: too much work for irq3
[ 31.420036] eth0: no IPv6 routers present

par contre, desolé si ca fait un peu gros.

encore merci

jojorequin

au fait, si ca peut aider, j ai dans ma barre d outil 3 cd qui apparaisent, lorsque je clique sur l un deux je peux soit ouvrir cdrom0 ou monter cdrom0 (les 3 icones se nomment pareil ,cdrom0), mais le pb je ne peux monter cdrom0 sous peine de voir aparaitre CE message :

mount: périphérique spécial /dev/scd0 n'existe pas

bon pour ce que ca faut....

merci;)

Maisondouf

boudu !!!

Y avait longtemps que j'avais pas entendu parler de /dev/scd0, c'est le nom utilisé pour les anciens lecteurs CD en SCSI avec les linux de grands-papa...

Je pense qu'a force de faire des mise-à-jours de mises-à-jours, il traine des modules qui ne correspondent plus à ta version de noyau (2.6.32-16) et qui sont en conflits entre eux.

C'est pour cela que ton CD n'est pas reconnu.

Il faut que tu forces la re-installation du noyau (pas de panique)

Tu lances le gestionnaire de paquets Synaptic (menu systeme->administration) et dans la petite fenêtre de recherche, tu entres "2.6.32".

Dans la colonne de gauche, tu sélectionnes "installés".

Tu ne devrais te retrouver qu'avec le header et image de ton noyau.

Si tu as plusieurs versions (2.6.32-14, 2.6.32-15 ou 2.6.32-16), tu sélectionnes tout ce qui est en trop pour 'suppression complète' et celui que tu veux garder pour 'réinstallation'.

Ensuite, tu effaces ce que tu as mis dans la petite fenêtre de recherche et dans la colonne de gauche tu sélectionnes "Installés (pouvant être supprimés)".

Si il n'y a rien tant mieux, sinon tu sélectionnes tout pour 'suppression complète'.

Déjà avec ce traitement, les vieilleries seront effacées et ton noyau sera reconstruit à neuf.

Il ne te reste plus qu'à cliquer sur la flèche verte 'appliquer', à lui dire ok et aller boire un coup en attendant.

Une fois fini, ferme bien toutes les fenêtres, démonte tous les lecteurs et redémarre le PC.

Et .... on reprend au début : "dmseg >tata" (pas toto on le garde pour comparer)

jojorequin

:cool:alors là je me prends à rever d un juste retour a la normal!
et ca c est terrible!!

bon il est bientot minuit, madame commence a ronchonner severe, (mais sinon c est MOI qui commande a la maison...enfin...heu....) donc manip ( et quelle manip de ouf) a faire demain a tete reposée.

on y croit on y croit!!!😃

merci de te prendre le chou avec mes conneries ( je ne t oublis pas gonzolero, un grand merci a toi aussi)😉

Page suivante »