Hello.
Jusqu'ici tout allait bien, après grub j'avais plymouth, et même si le démarrage était rapide, j'avais un peu de temps pour le voir.
Maintenant... le démarrage se fait de manière étrange. 20 secondes d'underscore clignotant juste après grub, puis le GDM apparaît.
C'est pas bien grave, mais j'aimerais comprendre si ça vient de chez moi (et le régler) ou si c'est un bug (et le signaler).
Les logs :
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-20-generic (buildd@yellow) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #29-Ubuntu SMP Fri Apr 9 20:35:00 UTC 2010 (Ubuntu 2.6.32-20.29-generic 2.6.32.11+drm33.2)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-20-generic root=UUID=a96bc8a7-a388-4248-9869-8f74f7a979a8 ro quiet splash
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfee0000 (usable)
[ 0.000000] BIOS-e820: 00000000cfee0000 - 00000000cfee2000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cfee2000 - 00000000cfef0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cfef0000 - 00000000cff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000e4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CEFFF write-protect
[ 0.000000] CF000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 2 base 0D0000000 mask FF0000000 uncachable
[ 0.000000] 3 base 100000000 mask FC0000000 write-back
[ 0.000000] 4 base 130000000 mask FF0000000 uncachable
[ 0.000000] 5 base 0CFF00000 mask FFFF00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000cff00000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcfee0 max_arch_pfn = 0x400000000
[ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable)
[ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 000000000009f800 (usable)
[ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000cfee0000 (usable)
[ 0.000000] modified: 00000000cfee0000 - 00000000cfee2000 (ACPI NVS)
[ 0.000000] modified: 00000000cfee2000 - 00000000cfef0000 (ACPI data)
[ 0.000000] modified: 00000000cfef0000 - 00000000cff00000 (reserved)
[ 0.000000] modified: 00000000e0000000 - 00000000e4000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100000000 - 0000000130000000 (usable)
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cfee0000
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] 0000000000 - 00cfe00000 page 2M
[ 0.000000] 00cfe00000 - 00cfee0000 page 4k
[ 0.000000] kernel direct mapping tables up to cfee0000 @ 8000-e000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000130000000
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] 0100000000 - 0130000000 page 2M
[ 0.000000] kernel direct mapping tables up to 130000000 @ c000-12000
[ 0.000000] RAMDISK: 37819000 - 37fef904
[ 0.000000] ACPI: RSDP 00000000000f72b0 00014 (v00 GBT )
[ 0.000000] ACPI: RSDT 00000000cfee2040 00040 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: FACP 00000000cfee20c0 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: DSDT 00000000cfee2180 04C86 (v01 GBT GBTUACPI 00001000 MSFT 0100000C)
[ 0.000000] ACPI: FACS 00000000cfee0000 00040
[ 0.000000] ACPI: HPET 00000000cfee6f80 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
[ 0.000000] ACPI: MCFG 00000000cfee7000 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: EUDS 00000000cfee7040 00500 (v01 GBT 00000000 00000000)
[ 0.000000] ACPI: TAMG 00000000cfee7540 06852 (v01 GBT GBT B0 5455312E BG?? 00020101)
[ 0.000000] ACPI: APIC 00000000cfee6e80 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: SSDT 00000000cfeee400 003AB (v01 PmRef CpuPm 00003000 INTL 20040311)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000130000000
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000130000000
[ 0.000000] NODE_DATA [000000000000d000 - 0000000000011fff]
[ 0.000000] bootmap [0000000000012000 - 0000000000037fff] pages 26
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0130000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 0001a29e64] TEXT DATA BSS ==> [0001000000 - 0001a29e64]
[ 0.000000] #3 [0037819000 - 0037fef904] RAMDISK ==> [0037819000 - 0037fef904]
[ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
[ 0.000000] #5 [0001a2a000 - 0001a2a0f6] BRK ==> [0001a2a000 - 0001a2a0f6]
[ 0.000000] #6 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000]
[ 0.000000] #7 [000000c000 - 000000d000] PGTABLE ==> [000000c000 - 000000d000]
[ 0.000000] found SMP MP-table at [ffff8800000f58c0] f58c0
[ 0.000000] [ffffea0000000000-ffffea00043fffff] PMD -> [ffff880028600000-ffff88002bffffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00130000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000001
[ 0.000000] 0: 0x00000006 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000cfee0
[ 0.000000] 0: 0x00100000 -> 0x00130000
[ 0.000000] On node 0 totalpages: 1048186
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 104 pages reserved
[ 0.000000] DMA zone: 3834 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 833304 pages, LIFO batch:31
[ 0.000000] Normal zone: 2688 pages used for memmap
[ 0.000000] Normal zone: 193920 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cfee0000 - 00000000cfee2000
[ 0.000000] PM: Registered nosave memory: 00000000cfee2000 - 00000000cfef0000
[ 0.000000] PM: Registered nosave memory: 00000000cfef0000 - 00000000cff00000
[ 0.000000] PM: Registered nosave memory: 00000000cff00000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000e4000000
[ 0.000000] PM: Registered nosave memory: 00000000e4000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at e4000000 (gap: e4000000:1ac00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880028200000 s91544 r8192 d23144 u524288
[ 0.000000] pcpu-alloc: s91544 r8192 d23144 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031058
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-20-generic root=UUID=a96bc8a7-a388-4248-9869-8f74f7a979a8 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.000000] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
[ 0.000000] software IO TLB at phys 0x20000000 - 0x24000000
[ 0.000000] Memory: 4048216k/4980736k available (5409k kernel code, 787992k absent, 144528k reserved, 2975k data, 876k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:440
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 41943040 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2999.027 MHz processor.
[ 0.000005] Calibrating delay loop (skipped), value calculated using timer frequency.. 5998.05 BogoMIPS (lpj=29990270)
[ 0.000025] Security Framework initialized
[ 0.000039] AppArmor: AppArmor initialized
[ 0.010200] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.011674] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.012357] Mount-cache hash table entries: 256
[ 0.012460] Initializing cgroup subsys ns
[ 0.012464] Initializing cgroup subsys cpuacct
[ 0.012466] Initializing cgroup subsys memory
[ 0.012472] Initializing cgroup subsys devices
[ 0.012473] Initializing cgroup subsys freezer
[ 0.012475] Initializing cgroup subsys net_cls
[ 0.012489] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.012491] CPU: L2 cache: 6144K
[ 0.012494] CPU 0/0x0 -> Node 0
[ 0.012495] CPU: Physical Processor ID: 0
[ 0.012496] CPU: Processor Core ID: 0
[ 0.012499] mce: CPU supports 6 MCE banks
[ 0.012505] CPU0: Thermal monitoring enabled (TM2)
[ 0.012508] using mwait in idle threads.
[ 0.012509] Performance Events: Core2 events, Intel PMU driver.
[ 0.012513] ... version: 2
[ 0.012514] ... bit width: 40
[ 0.012515] ... generic registers: 2
[ 0.012516] ... value mask: 000000ffffffffff
[ 0.012518] ... max period: 000000007fffffff
[ 0.012519] ... fixed-purpose events: 3
[ 0.012520] ... event mask: 0000000700000003
[ 0.014965] ACPI: Core revision 20090903
[ 0.020019] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.020026] ftrace: allocating 22515 entries in 89 pages
[ 0.026982] Setting APIC routing to flat
[ 0.027279] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.128505] CPU0: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz stepping 0a
[ 0.130000] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.010000] Initializing CPU#1
[ 0.010000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.010000] CPU: L2 cache: 6144K
[ 0.010000] CPU 1/0x1 -> Node 0
[ 0.010000] CPU: Physical Processor ID: 0
[ 0.010000] CPU: Processor Core ID: 1
[ 0.010000] CPU1: Thermal monitoring enabled (TM2)
[ 0.280042] CPU1: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz stepping 0a
[ 0.280047] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.290012] Brought up 2 CPUs
[ 0.290014] Total of 2 processors activated (11997.36 BogoMIPS).
[ 0.290735] CPU0 attaching sched-domain:
[ 0.290737] domain 0: span 0-1 level MC
[ 0.290739] groups: 0 1
[ 0.290744] CPU1 attaching sched-domain:
[ 0.290745] domain 0: span 0-1 level MC
[ 0.290746] groups: 1 0
[ 0.290812] devtmpfs: initialized
[ 0.290812] regulator: core version 0.5
[ 0.290812] Time: 15:27:01 Date: 04/12/10
[ 0.290812] NET: Registered protocol family 16
[ 0.290812] Trying to unpack rootfs image as initramfs...
[ 0.290812] ACPI: bus type pci registered
[ 0.290812] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63
[ 0.290812] PCI: MCFG area at e0000000 reserved in E820
[ 0.291478] PCI: Using MMCONFIG at e0000000 - e3ffffff
[ 0.291479] PCI: Using configuration type 1 for base access
[ 0.300070] bio: create slab <bio-0> at 0
[ 0.300500] ACPI: EC: Look up EC in DSDT
[ 0.304911] ACPI: Interpreter enabled
[ 0.304916] ACPI: (supports S0 S3 S4 S5)
[ 0.304934] ACPI: Using IOAPIC for interrupt routing
[ 0.310240] ACPI Warning: Incorrect checksum in table [TAMG] - 01, should be 91 (20090903/tbutils-314)
[ 0.310333] ACPI: No dock devices found.
[ 0.310403] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.310475] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.310477] pci 0000:00:01.0: PME# disabled
[ 0.310533] pci 0000:00:1a.0: reg 20 io port: [0xe100-0xe11f]
[ 0.310587] pci 0000:00:1a.1: reg 20 io port: [0xe200-0xe21f]
[ 0.310642] pci 0000:00:1a.2: reg 20 io port: [0xe000-0xe01f]
[ 0.310689] pci 0000:00:1a.7: reg 10 32bit mmio: [0xe7305000-0xe73053ff]
[ 0.310752] pci 0000:00:1b.0: reg 10 64bit mmio: [0xe7300000-0xe7303fff]
[ 0.310785] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.310787] pci 0000:00:1b.0: PME# disabled
[ 0.310835] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.310838] pci 0000:00:1c.0: PME# disabled
[ 0.310892] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.310895] pci 0000:00:1c.3: PME# disabled
[ 0.310944] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.310946] pci 0000:00:1c.4: PME# disabled
[ 0.310990] pci 0000:00:1d.0: reg 20 io port: [0xe300-0xe31f]
[ 0.311045] pci 0000:00:1d.1: reg 20 io port: [0xe400-0xe41f]
[ 0.311100] pci 0000:00:1d.2: reg 20 io port: [0xe500-0xe51f]
[ 0.311147] pci 0000:00:1d.7: reg 10 32bit mmio: [0xe7304000-0xe73043ff]
[ 0.311316] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07]
[ 0.311320] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03]
[ 0.311324] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07]
[ 0.311328] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03]
[ 0.311332] pci 0000:00:1f.2: reg 20 io port: [0xf000-0xf00f]
[ 0.311337] pci 0000:00:1f.2: reg 24 io port: [0xf100-0xf10f]
[ 0.311372] pci 0000:00:1f.3: reg 10 64bit mmio: [0xe7306000-0xe73060ff]
[ 0.311382] pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f]
[ 0.311415] pci 0000:00:1f.5: reg 10 io port: [0xe700-0xe707]
[ 0.311419] pci 0000:00:1f.5: reg 14 io port: [0xe800-0xe803]
[ 0.311424] pci 0000:00:1f.5: reg 18 io port: [0xe900-0xe907]
[ 0.311428] pci 0000:00:1f.5: reg 1c io port: [0xea00-0xea03]
[ 0.311432] pci 0000:00:1f.5: reg 20 io port: [0xeb00-0xeb0f]
[ 0.311436] pci 0000:00:1f.5: reg 24 io port: [0xec00-0xec0f]
[ 0.311480] pci 0000:01:00.0: reg 10 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.311487] pci 0000:01:00.0: reg 18 64bit mmio: [0xe5000000-0xe500ffff]
[ 0.311492] pci 0000:01:00.0: reg 20 io port: [0xb000-0xb0ff]
[ 0.311498] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[ 0.311513] pci 0000:01:00.0: supports D1 D2
[ 0.311537] pci 0000:01:00.1: reg 10 64bit mmio: [0xe5010000-0xe5013fff]
[ 0.311564] pci 0000:01:00.1: supports D1 D2
[ 0.311600] pci 0000:00:01.0: bridge io port: [0xb000-0xbfff]
[ 0.311602] pci 0000:00:01.0: bridge 32bit mmio: [0xe4000000-0xe5ffffff]
[ 0.311605] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.311717] pci 0000:03:00.0: reg 24 32bit mmio: [0xe7000000-0xe7001fff]
[ 0.311751] pci 0000:03:00.0: PME# supported from D3hot
[ 0.311755] pci 0000:03:00.0: PME# disabled
[ 0.311801] pci 0000:03:00.1: reg 10 io port: [0xc000-0xc007]
[ 0.311809] pci 0000:03:00.1: reg 14 io port: [0xc100-0xc103]
[ 0.311816] pci 0000:03:00.1: reg 18 io port: [0xc200-0xc207]
[ 0.311824] pci 0000:03:00.1: reg 1c io port: [0xc300-0xc303]
[ 0.311831] pci 0000:03:00.1: reg 20 io port: [0xc400-0xc40f]
[ 0.311909] pci 0000:00:1c.3: bridge io port: [0xc000-0xcfff]
[ 0.311912] pci 0000:00:1c.3: bridge 32bit mmio: [0xe7000000-0xe70fffff]
[ 0.311953] pci 0000:04:00.0: reg 10 io port: [0xd000-0xd0ff]
[ 0.311970] pci 0000:04:00.0: reg 18 64bit mmio pref: [0xe7110000-0xe7110fff]
[ 0.311981] pci 0000:04:00.0: reg 20 64bit mmio pref: [0xe7100000-0xe710ffff]
[ 0.311988] pci 0000:04:00.0: reg 30 32bit mmio pref: [0x000000-0x00ffff]
[ 0.312022] pci 0000:04:00.0: supports D1 D2
[ 0.312023] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.312027] pci 0000:04:00.0: PME# disabled
[ 0.312074] pci 0000:00:1c.4: bridge io port: [0xd000-0xdfff]
[ 0.312077] pci 0000:00:1c.4: bridge 32bit mmio: [0xe6000000-0xe6ffffff]
[ 0.312081] pci 0000:00:1c.4: bridge 64bit mmio pref: [0xe7100000-0xe71fffff]
[ 0.312119] pci 0000:05:07.0: reg 10 32bit mmio: [0xe7204000-0xe72047ff]
[ 0.312124] pci 0000:05:07.0: reg 14 32bit mmio: [0xe7200000-0xe7203fff]
[ 0.312160] pci 0000:05:07.0: supports D1 D2
[ 0.312162] pci 0000:05:07.0: PME# supported from D0 D1 D2 D3hot
[ 0.312165] pci 0000:05:07.0: PME# disabled
[ 0.312196] pci 0000:00:1e.0: transparent bridge
[ 0.312200] pci 0000:00:1e.0: bridge 32bit mmio: [0xe7200000-0xe72fffff]
[ 0.312220] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.312314] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.312354] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[ 0.312397] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[ 0.312434] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.323848] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.323918] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.323986] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *6 7 9 10 11 12 14 15)
[ 0.324059] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.324128] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.324197] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.324265] ACPI: PCI Interrupt Link [LNK0] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[ 0.324333] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.324415] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.324419] vgaarb: loaded
[ 0.324493] SCSI subsystem initialized
[ 0.324549] libata version 3.00 loaded.
[ 0.324596] usbcore: registered new interface driver usbfs
[ 0.324605] usbcore: registered new interface driver hub
[ 0.324625] usbcore: registered new device driver usb
[ 0.324710] ACPI: WMI: Mapper loaded
[ 0.324712] PCI: Using ACPI for IRQ routing
[ 0.324839] NetLabel: Initializing
[ 0.324840] NetLabel: domain hash size = 128
[ 0.324841] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.324852] NetLabel: unlabeled traffic allowed by default
[ 0.324873] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.324876] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.330095] Switching to clocksource tsc
[ 0.331209] AppArmor: AppArmor Filesystem Enabled
[ 0.331216] pnp: PnP ACPI init
[ 0.331223] ACPI: bus type pnp registered
[ 0.333148] pnp: PnP ACPI: found 13 devices
[ 0.333150] ACPI: ACPI bus type pnp unregistered
[ 0.333157] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 0.333159] system 00:01: ioport range 0x290-0x29f has been reserved
[ 0.333161] system 00:01: ioport range 0x800-0x87f has been reserved
[ 0.333163] system 00:01: ioport range 0x290-0x294 has been reserved
[ 0.333164] system 00:01: ioport range 0x880-0x88f has been reserved
[ 0.333169] system 00:09: ioport range 0x400-0x4cf has been reserved
[ 0.333173] system 00:09: ioport range 0x4d2-0x4ff has been reserved
[ 0.333177] system 00:0a: iomem range 0xe0000000-0xe3ffffff has been reserved
[ 0.333181] system 00:0b: iomem range 0xcf600-0xcffff has been reserved
[ 0.333183] system 00:0b: iomem range 0xf0000-0xf7fff could not be reserved
[ 0.333185] system 00:0b: iomem range 0xf8000-0xfbfff could not be reserved
[ 0.333187] system 00:0b: iomem range 0xfc000-0xfffff could not be reserved
[ 0.333189] system 00:0b: iomem range 0xcfee0000-0xcfefffff could not be reserved
[ 0.333191] system 00:0b: iomem range 0x0-0x9ffff could not be reserved
[ 0.333192] system 00:0b: iomem range 0x100000-0xcfedffff could not be reserved
[ 0.333195] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.333197] system 00:0b: iomem range 0xfed10000-0xfed1dfff has been reserved
[ 0.333199] system 00:0b: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 0.333201] system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.333203] system 00:0b: iomem range 0xffb00000-0xffb7ffff has been reserved
[ 0.333205] system 00:0b: iomem range 0xfff00000-0xffffffff has been reserved
[ 0.333206] system 00:0b: iomem range 0xe0000-0xeffff has been reserved
[ 0.337867] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.337869] pci 0000:00:01.0: IO window: 0xb000-0xbfff
[ 0.337872] pci 0000:00:01.0: MEM window: 0xe4000000-0xe5ffffff
[ 0.337874] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 0.337877] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.337879] pci 0000:00:1c.0: IO window: 0x1000-0x1fff
[ 0.337883] pci 0000:00:1c.0: MEM window: 0xe7400000-0xe75fffff
[ 0.337886] pci 0000:00:1c.0: PREFETCH window: 0x000000e7600000-0x000000e77fffff
[ 0.337890] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:03
[ 0.337892] pci 0000:00:1c.3: IO window: 0xc000-0xcfff
[ 0.337896] pci 0000:00:1c.3: MEM window: 0xe7000000-0xe70fffff
[ 0.337899] pci 0000:00:1c.3: PREFETCH window: 0x000000e7800000-0x000000e79fffff
[ 0.337904] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:04
[ 0.337906] pci 0000:00:1c.4: IO window: 0xd000-0xdfff
[ 0.337909] pci 0000:00:1c.4: MEM window: 0xe6000000-0xe6ffffff
[ 0.337912] pci 0000:00:1c.4: PREFETCH window: 0x000000e7100000-0x000000e71fffff
[ 0.337917] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
[ 0.337918] pci 0000:00:1e.0: IO window: disabled
[ 0.337921] pci 0000:00:1e.0: MEM window: 0xe7200000-0xe72fffff
[ 0.337924] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.337933] alloc irq_desc for 16 on node -1
[ 0.337934] alloc kstat_irqs on node -1
[ 0.337937] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.337940] pci 0000:00:01.0: setting latency timer to 64
[ 0.337946] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.337948] pci 0000:00:1c.0: setting latency timer to 64
[ 0.337954] alloc irq_desc for 19 on node -1
[ 0.337955] alloc kstat_irqs on node -1
[ 0.337957] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.337960] pci 0000:00:1c.3: setting latency timer to 64
[ 0.337966] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.337968] pci 0000:00:1c.4: setting latency timer to 64
[ 0.337973] pci 0000:00:1e.0: setting latency timer to 64
[ 0.337976] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.337978] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.337980] pci_bus 0000:01: resource 0 io: [0xb000-0xbfff]
[ 0.337981] pci_bus 0000:01: resource 1 mem: [0xe4000000-0xe5ffffff]
[ 0.337983] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
[ 0.337985] pci_bus 0000:02: resource 0 io: [0x1000-0x1fff]
[ 0.337986] pci_bus 0000:02: resource 1 mem: [0xe7400000-0xe75fffff]
[ 0.337988] pci_bus 0000:02: resource 2 pref mem [0xe7600000-0xe77fffff]
[ 0.337989] pci_bus 0000:03: resource 0 io: [0xc000-0xcfff]
[ 0.337991] pci_bus 0000:03: resource 1 mem: [0xe7000000-0xe70fffff]
[ 0.337993] pci_bus 0000:03: resource 2 pref mem [0xe7800000-0xe79fffff]
[ 0.337994] pci_bus 0000:04: resource 0 io: [0xd000-0xdfff]
[ 0.337996] pci_bus 0000:04: resource 1 mem: [0xe6000000-0xe6ffffff]
[ 0.337997] pci_bus 0000:04: resource 2 pref mem [0xe7100000-0xe71fffff]
[ 0.337999] pci_bus 0000:05: resource 1 mem: [0xe7200000-0xe72fffff]
[ 0.338001] pci_bus 0000:05: resource 3 io: [0x00-0xffff]
[ 0.338002] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.338023] NET: Registered protocol family 2
[ 0.338138] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.338973] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.341815] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.342193] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.342195] TCP reno registered
[ 0.342280] NET: Registered protocol family 1
[ 0.342410] pci 0000:01:00.0: Boot video device
[ 0.342577] Scanning for low memory corruption every 60 seconds
[ 0.342687] audit: initializing netlink socket (disabled)
[ 0.342694] type=2000 audit(1271086020.339:1): initialized
[ 0.349263] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.350227] VFS: Disk quotas dquot_6.5.2
[ 0.350265] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.350657] fuse init (API version 7.13)
[ 0.350711] msgmni has been set to 7906
[ 0.350851] alg: No test for stdrng (krng)
[ 0.350887] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.350889] io scheduler noop registered
[ 0.350890] io scheduler anticipatory registered
[ 0.350891] io scheduler deadline registered
[ 0.350915] io scheduler cfq registered (default)
[ 0.351012] alloc irq_desc for 24 on node -1
[ 0.351014] alloc kstat_irqs on node -1
[ 0.351020] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
[ 0.351024] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.351094] alloc irq_desc for 25 on node -1
[ 0.351096] alloc kstat_irqs on node -1
[ 0.351101] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
[ 0.351106] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.351187] alloc irq_desc for 26 on node -1
[ 0.351188] alloc kstat_irqs on node -1
[ 0.351193] pcieport 0000:00:1c.3: irq 26 for MSI/MSI-X
[ 0.351199] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.351282] alloc irq_desc for 27 on node -1
[ 0.351283] alloc kstat_irqs on node -1
[ 0.351288] pcieport 0000:00:1c.4: irq 27 for MSI/MSI-X
[ 0.351294] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.351353] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.351418] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.351493] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.351495] ACPI: Power Button [PWRB]
[ 0.351531] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.351533] ACPI: Power Button [PWRF]
[ 0.351883] ACPI: SSDT 00000000cfeedde0 0022A (v01 PmRef Cpu0Ist 00003000 INTL 20040311)
[ 0.351995] Marking TSC unstable due to TSC halts in idle
[ 0.352030] processor LNXCPU:00: registered as cooling_device0
[ 0.352172] ACPI: SSDT 00000000cfeee2a0 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20040311)
[ 0.352301] Switching to clocksource hpet
[ 0.352306] processor LNXCPU:01: registered as cooling_device1
[ 0.354597] Linux agpgart interface v0.103
[ 0.354620] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.354702] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.354922] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.355618] brd: module loaded
[ 0.355934] loop: module loaded
[ 0.355986] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 0.356035] ata_piix 0000:00:1f.2: version 2.13
[ 0.356044] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.356048] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.356078] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.362030] scsi0 : ata_piix
[ 0.362080] scsi1 : ata_piix
[ 0.362566] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 0.362570] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 0.362585] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.362588] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 0.362614] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 0.362653] scsi2 : ata_piix
[ 0.362686] scsi3 : ata_piix
[ 0.363038] ata3: SATA max UDMA/133 cmd 0xe700 ctl 0xe800 bmdma 0xeb00 irq 19
[ 0.363040] ata4: SATA max UDMA/133 cmd 0xe900 ctl 0xea00 bmdma 0xeb08 irq 19
[ 0.363080] pata_acpi 0000:03:00.1: enabling device (0000 -> 0001)
[ 0.363084] pata_acpi 0000:03:00.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.363105] pata_acpi 0000:03:00.1: setting latency timer to 64
[ 0.363115] pata_acpi 0000:03:00.1: PCI INT B disabled
[ 0.363303] Fixed MDIO Bus: probed
[ 0.363325] PPP generic driver version 2.4.2
[ 0.363349] tun: Universal TUN/TAP device driver, 1.6
[ 0.363351] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.363407] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.363419] alloc irq_desc for 18 on node -1
[ 0.363420] alloc kstat_irqs on node -1
[ 0.363424] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.363435] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.363438] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.363459] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.367341] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 0.367350] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe7305000
[ 0.390037] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.390121] usb usb1: configuration #1 chosen from 1 choice
[ 0.390143] hub 1-0:1.0: USB hub found
[ 0.390149] hub 1-0:1.0: 6 ports detected
[ 0.390198] alloc irq_desc for 23 on node -1
[ 0.390199] alloc kstat_irqs on node -1
[ 0.390204] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.390221] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.390223] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.390249] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.394136] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.394149] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe7304000
[ 0.410012] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.410098] usb usb2: configuration #1 chosen from 1 choice
[ 0.410118] hub 2-0:1.0: USB hub found
[ 0.410124] hub 2-0:1.0: 6 ports detected
[ 0.410173] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.410185] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.410219] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.410225] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.410227] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.410252] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.410280] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e100
[ 0.410337] usb usb3: configuration #1 chosen from 1 choice
[ 0.410358] hub 3-0:1.0: USB hub found
[ 0.410363] hub 3-0:1.0: 2 ports detected
[ 0.410394] alloc irq_desc for 21 on node -1
[ 0.410395] alloc kstat_irqs on node -1
[ 0.410399] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.410403] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.410405] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.410427] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.410452] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e200
[ 0.410509] usb usb4: configuration #1 chosen from 1 choice
[ 0.410525] hub 4-0:1.0: USB hub found
[ 0.410529] hub 4-0:1.0: 2 ports detected
[ 0.410559] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.410563] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 0.410566] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.410593] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.410612] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000e000
[ 0.410668] usb usb5: configuration #1 chosen from 1 choice
[ 0.410684] hub 5-0:1.0: USB hub found
[ 0.410688] hub 5-0:1.0: 2 ports detected
[ 0.410725] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.410729] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.410731] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.410754] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.410774] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e300
[ 0.410837] usb usb6: configuration #1 chosen from 1 choice
[ 0.410852] hub 6-0:1.0: USB hub found
[ 0.410856] hub 6-0:1.0: 2 ports detected
[ 0.410886] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.410890] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.410893] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.410913] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.410932] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e400
[ 0.410988] usb usb7: configuration #1 chosen from 1 choice
[ 0.411004] hub 7-0:1.0: USB hub found
[ 0.411008] hub 7-0:1.0: 2 ports detected
[ 0.411036] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.411040] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.411042] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.411065] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.411083] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e500
[ 0.411140] usb usb8: configuration #1 chosen from 1 choice
[ 0.411158] hub 8-0:1.0: USB hub found
[ 0.411162] hub 8-0:1.0: 2 ports detected
[ 0.411226] PNP: No PS/2 controller found. Probing ports directly.
[ 0.411561] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.411565] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.411647] mice: PS/2 mouse device common for all mice
[ 0.411723] rtc_cmos 00:04: RTC can wake from S4
[ 0.411753] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.411773] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.411853] device-mapper: uevent: version 1.0.3
[ 0.411926] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 0.411970] device-mapper: multipath: version 1.1.0 loaded
[ 0.411972] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.412090] cpuidle: using governor ladder
[ 0.412130] cpuidle: using governor menu
[ 0.412359] TCP cubic registered
[ 0.412439] NET: Registered protocol family 10
[ 0.412740] lo: Disabled Privacy Extensions
[ 0.412926] NET: Registered protocol family 17
[ 0.415171] PM: Resume from disk failed.
[ 0.415180] registered taskstats version 1
[ 0.415524] Magic number: 6:405:487
[ 0.415596] rtc_cmos 00:04: setting system clock to 2010-04-12 15:27:01 UTC (1271086021)
[ 0.415598] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.415600] EDD information not available.
[ 0.423595] Freeing initrd memory: 8026k freed
[ 0.730630] ata3: SATA link down (SStatus 0 SControl 300)
[ 0.741238] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.110013] usb 3-1: new low speed USB device using uhci_hcd and address 2
[ 1.230059] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.230070] ata2.01: SATA link down (SStatus 0 SControl 300)
[ 1.250223] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.250234] ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.250412] ata2.00: ATA-7: SAMSUNG HD502IJ, 1AA01113, max UDMA7
[ 1.250414] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.282403] usb 3-1: configuration #1 chosen from 1 choice
[ 1.290564] ata2.00: configured for UDMA/133
[ 1.310178] ata1.00: HPA unlocked: 976771055 -> 976773168, native 976773168
[ 1.310186] ata1.00: ATA-7: SAMSUNG HD502IJ, 1AA01113, max UDMA7
[ 1.310188] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.310203] ata1.01: ATAPI: TSSTcorp CDDVDW SH-S223Q, SB00, max UDMA/100
[ 1.330301] ata1.00: configured for UDMA/133
[ 1.370194] ata1.01: configured for UDMA/100
[ 1.370548] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD502IJ 1AA0 PQ: 0 ANSI: 5
[ 1.370651] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.370657] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.370682] sd 0:0:0:0: [sda] Write Protect is off
[ 1.370684] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.370700] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.371299] scsi 0:0:1:0: CD-ROM TSSTcorp CDDVDW SH-S223Q SB00 PQ: 0 ANSI: 5
[ 1.371347] sda: sda1 sda2 sda3
[ 1.397275] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.397278] Uniform CD-ROM driver Revision: 3.20
[ 1.397345] sr 0:0:1:0: Attached scsi CD-ROM sr0
[ 1.397383] sr 0:0:1:0: Attached scsi generic sg1 type 5
[ 1.397462] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD502IJ 1AA0 PQ: 0 ANSI: 5
[ 1.397466] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.397519] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.397530] sd 1:0:0:0: Attached scsi generic sg2 type 0
[ 1.397547] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.397549] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.397571] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.397645] sdb: sdb1
[ 1.406964] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.406981] Freeing unused kernel memory: 876k freed
[ 1.407233] Write protecting the kernel read-only data: 7680k
[ 1.422216] udev: starting version 151
[ 1.461529] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.461545] r8169 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.461581] r8169 0000:04:00.0: setting latency timer to 64
[ 1.461620] alloc irq_desc for 28 on node -1
[ 1.461621] alloc kstat_irqs on node -1
[ 1.461632] r8169 0000:04:00.0: irq 28 for MSI/MSI-X
[ 1.467880] eth0: RTL8168c/8111c at 0xffffc90000666000, 00:1f:d0:9b:3b:2d, XID 1c4000c0 IRQ 28
[ 1.498425] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 1.498451] pata_jmicron 0000:03:00.1: setting latency timer to 64
[ 1.501997] scsi4 : pata_jmicron
[ 1.502082] scsi5 : pata_jmicron
[ 1.502555] ata5: PATA max UDMA/100 cmd 0xc000 ctl 0xc100 bmdma 0xc400 irq 16
[ 1.502557] ata6: PATA max UDMA/100 cmd 0xc200 ctl 0xc300 bmdma 0xc408 irq 16
[ 1.503670] ahci 0000:03:00.0: version 3.0
[ 1.503682] ahci 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.503881] usbcore: registered new interface driver hiddev
[ 1.518591] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input3
[ 1.518656] generic-usb 0003:15CA:00C3.0001: input,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:1a.0-1/input0
[ 1.518671] usbcore: registered new interface driver usbhid
[ 1.518673] usbhid: v2.6:USB HID core driver
[ 1.521288] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 1.521291] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 1.521298] ahci 0000:03:00.0: setting latency timer to 64
[ 1.521415] scsi6 : ahci
[ 1.521472] scsi7 : ahci
[ 1.521534] ata7: SATA max UDMA/133 abar m8192@0xe7000000 port 0xe7000100 irq 19
[ 1.521537] ata8: SATA max UDMA/133 abar m8192@0xe7000000 port 0xe7000180 irq 19
[ 1.560021] usb 3-2: new full speed USB device using uhci_hcd and address 3
[ 1.737886] EXT4-fs (sda3): mounted filesystem with ordered data mode
[ 1.739364] usb 3-2: configuration #1 chosen from 1 choice
[ 1.870047] ata8: SATA link down (SStatus 0 SControl 300)
[ 1.870076] ata7: SATA link down (SStatus 0 SControl 300)
[ 1.891694] ohci1394 0000:05:07.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.951283] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[23] MMIO=[e7204000-e72047ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 2.030015] usb 8-2: new low speed USB device using uhci_hcd and address 2
[ 2.359197] usb 8-2: configuration #1 chosen from 1 choice
[ 2.432355] input: Logitech HID compliant keyboard as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input4
[ 2.432400] generic-usb 0003:046D:C30E.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech HID compliant keyboard] on usb-0000:00:1d.2-2/input0
[ 2.560189] input: Logitech HID compliant keyboard as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.1/input/input5
[ 2.560233] generic-usb 0003:046D:C30E.0003: input,hidraw2: USB HID v1.10 Device [Logitech HID compliant keyboard] on usb-0000:00:1d.2-2/input1
[ 3.271346] ieee1394: Host added: ID:BUS[0-00:1023] GUID[007b023f00001fd0]
[ 19.954524] udev: starting version 151
[ 20.084187] lp: driver loaded but no devices found
[ 20.131140] Bluetooth: Core ver 2.15
[ 20.132797] [drm] Initialized drm 1.1.0 20060810
[ 20.146278] NET: Registered protocol family 31
[ 20.146279] Bluetooth: HCI device and connection manager initialized
[ 20.146282] Bluetooth: HCI socket layer initialized
[ 20.147334] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 20.147411] usbcore: registered new interface driver btusb
[ 20.149884] parport_pc 00:08: reported by Plug and Play ACPI
[ 20.149940] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 20.152213] type=1505 audit(1271078841.234:2): operation="profile_load" pid=719 name="/sbin/dhclient3"
[ 20.152654] type=1505 audit(1271078841.234:3): operation="profile_load" pid=719 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 20.152893] type=1505 audit(1271078841.234:4): operation="profile_load" pid=719 name="/usr/lib/connman/scripts/dhclient-script"
[ 20.183891] [drm] radeon kernel modesetting enabled.
[ 20.183928] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 20.183932] radeon 0000:01:00.0: setting latency timer to 64
[ 20.185150] [drm] radeon: Initializing kernel modesetting.
[ 20.189207] [drm] register mmio base: 0xE5000000
[ 20.189209] [drm] register mmio size: 65536
[ 20.189261] ATOM BIOS: ATI
[ 20.189272] [drm] Clocks initialized !
[ 20.189286] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[ 20.189288] [drm] Detected VRAM RAM=256M, BAR=256M
[ 20.189289] [drm] RAM width 256bits DDR
[ 20.192845] [TTM] Zone kernel: Available graphics memory: 2028560 kiB.
[ 20.192856] [drm] radeon: 256M of VRAM memory ready
[ 20.192858] [drm] radeon: 512M of GTT memory ready.
[ 20.192887] alloc irq_desc for 29 on node -1
[ 20.192889] alloc kstat_irqs on node -1
[ 20.192896] radeon 0000:01:00.0: irq 29 for MSI/MSI-X
[ 20.192900] [drm] radeon: using MSI.
[ 20.192921] [drm] radeon: irq initialized.
[ 20.192923] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 20.193333] [drm] Loading RV770 Microcode
[ 20.193336] platform radeon_cp.0: firmware: requesting radeon/RV770_pfp.bin
[ 20.200673] ppdev: user-space parallel port driver
[ 20.203026] platform radeon_cp.0: firmware: requesting radeon/RV770_me.bin
[ 20.205615] platform radeon_cp.0: firmware: requesting radeon/R700_rlc.bin
[ 20.230135] lp0: using parport0 (interrupt-driven).
[ 20.254499] alloc irq_desc for 22 on node -1
[ 20.254501] alloc kstat_irqs on node -1
[ 20.254506] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 20.254539] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 20.265851] [drm] ring test succeeded in 1 usecs
[ 20.265950] [drm] radeon: ib pool ready.
[ 20.266005] [drm] ib test succeeded in 0 usecs
[ 20.266395] [drm] Default TV standard: PAL
[ 20.266871] [drm] Radeon Display Connectors
[ 20.266873] [drm] Connector 0:
[ 20.266874] [drm] DVI-I
[ 20.266875] [drm] HPD1
[ 20.266876] [drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
[ 20.266878] [drm] Encoders:
[ 20.266879] [drm] DFP1: INTERNAL_UNIPHY
[ 20.266880] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 20.266881] [drm] Connector 1:
[ 20.266882] [drm] DIN
[ 20.266883] [drm] Encoders:
[ 20.266884] [drm] TV1: INTERNAL_KLDSCP_DAC2
[ 20.266885] [drm] Connector 2:
[ 20.266886] [drm] DVI-I
[ 20.266887] [drm] HPD2
[ 20.266888] [drm] DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c
[ 20.266889] [drm] Encoders:
[ 20.266890] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 20.266891] [drm] DFP2: INTERNAL_KLDSCP_LVTMA
[ 20.328964] type=1505 audit(1271078841.404:5): operation="profile_load" pid=923 name="/usr/share/gdm/guest-session/Xsession"
[ 20.329902] type=1505 audit(1271078841.404:6): operation="profile_replace" pid=924 name="/sbin/dhclient3"
[ 20.330482] type=1505 audit(1271078841.414:7): operation="profile_replace" pid=924 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 20.330725] type=1505 audit(1271078841.414:8): operation="profile_replace" pid=924 name="/usr/lib/connman/scripts/dhclient-script"
[ 20.334815] type=1505 audit(1271078841.414:9): operation="profile_load" pid=926 name="/usr/bin/evince"
[ 20.340753] type=1505 audit(1271078841.424:10): operation="profile_load" pid=926 name="/usr/bin/evince-previewer"
[ 20.344231] type=1505 audit(1271078841.424:11): operation="profile_load" pid=926 name="/usr/bin/evince-thumbnailer"
[ 20.368771] r8169: eth0: link down
[ 20.369109] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 20.388754] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
[ 20.550786] Bluetooth: L2CAP ver 2.14
[ 20.550788] Bluetooth: L2CAP socket layer initialized
[ 20.557005] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 20.557006] Bluetooth: BNEP filters: protocol multicast
[ 20.561639] Bridge firewalling registered
[ 20.565906] Bluetooth: SCO (Voice Link) ver 0.6
[ 20.565908] Bluetooth: SCO socket layer initialized
[ 20.614237] [drm] fb mappable at 0xD0141000
[ 20.614238] [drm] vram apper at 0xD0000000
[ 20.614240] [drm] size 7257600
[ 20.614241] [drm] fb depth is 24
[ 20.614242] [drm] pitch is 6912
[ 20.616939] fb0: radeondrmfb frame buffer device
[ 20.616940] registered panic notifier
[ 20.616944] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0
[ 20.616977] alloc irq_desc for 17 on node -1
[ 20.616978] alloc kstat_irqs on node -1
[ 20.616983] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 20.617004] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 20.618478] vga16fb: initializing
[ 20.618482] vga16fb: mapped to 0xffff8800000a0000
[ 20.618484] vga16fb: not registering due to another framebuffer present
[ 20.644102] Console: switching to colour frame buffer device 210x65
[ 20.673016] Bluetooth: RFCOMM TTY layer initialized
[ 20.673017] Bluetooth: RFCOMM socket layer initialized
[ 20.673019] Bluetooth: RFCOMM ver 1.11
[ 21.176092] CPU0 attaching NULL sched-domain.
[ 21.176095] CPU1 attaching NULL sched-domain.
[ 21.232965] CPU0 attaching sched-domain:
[ 21.232967] domain 0: span 0-1 level MC
[ 21.232969] groups: 0 1
[ 21.232973] CPU1 attaching sched-domain:
[ 21.232975] domain 0: span 0-1 level MC
[ 21.232976] groups: 1 0
[ 22.906843] CPU0 attaching NULL sched-domain.
[ 22.906847] CPU1 attaching NULL sched-domain.
[ 22.941314] CPU0 attaching sched-domain:
[ 22.941316] domain 0: span 0-1 level MC
[ 22.941318] groups: 0 1
[ 22.941322] CPU1 attaching sched-domain:
[ 22.941324] domain 0: span 0-1 level MC
[ 22.941325] groups: 1 0
[ 23.632641] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
Bootchart :
J'ai essayé de débrancher le clavier, ethernet (les deriers à apparaître sur les logs avant le passage 2s à 20s), de virer l'ipv6 (un classique des problèmes de boot), ça change rien.
Quelqu'un y comprend quelque chose ?
