Bonjour,
Comme vous pouvez vous en douter, j'ai moi aussi un problème.
Tout d'abord, voici ma configuration :
Ubuntu 14.04
Cartes :
Nvidia :GEforce840M
Intel : Haswell-ULT Integrated Graphics Controller
J'ai installé bumblebee. Mais lorsque que j'exécute n'importe quoi avec optirun, je reçois le message suivant :
[ 3298.372948] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) [drm] KMS not enabled
[ 3298.372984] [ERROR]Aborting because fallback start is disabled.
Merci à ceux qui peuvent m'aider !
Autres informations qui pourraient être utiles :
->Pas de problème avec Windows 8 installé sur une autre partition.
->J'ai déjà fait un reformatage de Linux pour d'autres raisons mais il y a toujours le même bug.
-> J'ai fait des sudo apt-get upgrade et update sans succès.
->La commande " lshw -enable pci -class display" ne m'indique que ma carte Intel mais la commande lspci donne les deux cartes.
00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 09)
04:00.0 3D controller: NVIDIA Corporation GM108M [GeForce 840M] (rev ff)
*-display
description: VGA compatible controller
produit: Haswell-ULT Integrated Graphics Controller
fabriquant: Intel Corporation
identifiant matériel: 2
information bus: pci@0000:00:02.0
version: 09
bits: 64 bits
horloge: 33MHz
fonctionnalités: msi pm vga_controller bus_master cap_list rom
configuration: driver=i915 latency=0
ressources: irq:64 mémoire:f7400000-f77fffff mémoire:d0000000-dfffffff portE/S:f000(taille=64)
-> Le fichier /etc/X11/xorg.conf n'eiste pas
-> Voici le contenu de /var/log/Xorg.0.log :
[ 33.880]
X.Org X Server 1.16.0
Release Date: 2014-07-16
[ 33.880] X Protocol Version 11, Revision 0
[ 33.880] Build Operating System: Linux 3.2.0-70-generic x86_64 Ubuntu
[ 33.880] Current Operating System: Linux basile-portable-ubuntu 3.16.0-38-generic #52~14.04.1-Ubuntu SMP Fri May 8 09:43:57 UTC 2015 x86_64
[ 33.880] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-38-generic.efi.signed root=UUID=829e6975-5fa2-41af-81e1-e4af9529aaa7 ro quiet splash vt.handoff=7
[ 33.880] Build Date: 12 February 2015 11:11:26PM
[ 33.880] xorg-server 2:1.16.0-1ubuntu1.2~trusty2 (For technical support please see http://www.ubuntu.com/support)
[ 33.880] Current version of pixman: 0.30.2
[ 33.880] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 33.880] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 33.880] (==) Log file: "/var/log/Xorg.0.log", Time: Thu May 28 16:47:57 2015
[ 33.946] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 34.081] (==) No Layout section. Using the first Screen section.
[ 34.081] (==) No screen section available. Using defaults.
[ 34.081] (**) |-->Screen "Default Screen Section" (0)
[ 34.081] (**) | |-->Monitor "<default monitor>"
[ 34.110] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 34.110] (==) Automatically adding devices
[ 34.110] (==) Automatically enabling devices
[ 34.110] (==) Automatically adding GPU devices
[ 34.164] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 34.165] Entry deleted from font path.
[ 34.165] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 34.165] Entry deleted from font path.
[ 34.165] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 34.165] Entry deleted from font path.
[ 34.165] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 34.165] Entry deleted from font path.
[ 34.165] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 34.165] Entry deleted from font path.
[ 34.165] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 34.165] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 34.165] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 34.165] (II) Loader magic: 0x7f878816bc80
[ 34.165] (II) Module ABI versions:
[ 34.165] X.Org ANSI C Emulation: 0.4
[ 34.165] X.Org Video Driver: 18.0
[ 34.165] X.Org XInput driver : 21.0
[ 34.165] X.Org Server Extension : 8.0
[ 34.165] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 34.166] (--) PCI:*(0:0:2:0) 8086:0a16:1043:14fd rev 9, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[ 34.166] (--) PCI: (0:4:0:0) 10de:1341:1043:14fd rev 162, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000d000/128, BIOS @ 0x????????/524288
[ 34.175] (II) LoadModule: "glx"
[ 34.317] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 34.771] (II) Module glx: vendor="X.Org Foundation"
[ 34.771] compiled for 1.16.0, module version = 1.0.0
[ 34.771] ABI class: X.Org Server Extension, version 8.0
[ 34.771] (==) AIGLX enabled
[ 34.771] (==) Matched intel as autoconfigured driver 0
[ 34.771] (==) Matched intel as autoconfigured driver 1
[ 34.771] (==) Matched modesetting as autoconfigured driver 2
[ 34.771] (==) Matched fbdev as autoconfigured driver 3
[ 34.771] (==) Matched vesa as autoconfigured driver 4
[ 34.771] (==) Assigned the driver to the xf86ConfigLayout
[ 34.771] (II) LoadModule: "intel"
[ 34.771] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 34.836] (II) Module intel: vendor="X.Org Foundation"
[ 34.836] compiled for 1.16.0, module version = 2.99.914
[ 34.836] Module class: X.Org Video Driver
[ 34.836] ABI class: X.Org Video Driver, version 18.0
[ 34.836] (II) LoadModule: "modesetting"
[ 34.837] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 34.843] (II) Module modesetting: vendor="X.Org Foundation"
[ 34.843] compiled for 1.16.0, module version = 0.9.0
[ 34.843] Module class: X.Org Video Driver
[ 34.843] ABI class: X.Org Video Driver, version 18.0
[ 34.843] (II) LoadModule: "fbdev"
[ 34.844] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 34.855] (II) Module fbdev: vendor="X.Org Foundation"
[ 34.855] compiled for 1.16.0, module version = 0.4.4
[ 34.855] Module class: X.Org Video Driver
[ 34.855] ABI class: X.Org Video Driver, version 18.0
[ 34.855] (II) LoadModule: "vesa"
[ 34.855] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 34.875] (II) Module vesa: vendor="X.Org Foundation"
[ 34.875] compiled for 1.16.0, module version = 2.3.3
[ 34.876] Module class: X.Org Video Driver
[ 34.876] ABI class: X.Org Video Driver, version 18.0
[ 34.876] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 34.876] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[ 34.876] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[ 34.876] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[ 34.876] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 34.876] (II) FBDEV: driver for framebuffer: fbdev
[ 34.876] (II) VESA: driver for VESA chipsets: vesa
[ 34.876] (++) using VT number 7
[ 34.877] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20080730
[ 34.877] (II) intel(0): SNA compiled: xserver-xorg-video-intel-lts-utopic 2:2.99.914-1~exp1ubuntu4.2~trusty1 (Maarten Lankhorst <maarten.lankhorst@ubuntu.com>)
[ 34.877] (II) intel(0): SNA compiled for use with valgrind
[ 34.878] (WW) Falling back to old probe method for modesetting
[ 34.878] (WW) Falling back to old probe method for fbdev
[ 34.878] (II) Loading sub module "fbdevhw"
[ 34.878] (II) LoadModule: "fbdevhw"
[ 34.878] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 34.886] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 34.886] compiled for 1.16.0, module version = 0.0.2
[ 34.886] ABI class: X.Org Video Driver, version 18.0
[ 34.886] (WW) Falling back to old probe method for vesa
[ 34.886] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4400
[ 34.886] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2
[ 34.886] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 34.886] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 34.887] (==) intel(0): RGB weight 888
[ 34.887] (==) intel(0): Default visual is TrueColor
[ 34.887] (II) intel(0): Output eDP1 has no monitor section
[ 34.887] (--) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
[ 34.887] (II) intel(0): Output HDMI1 has no monitor section
[ 34.887] (II) intel(0): Output DP1 has no monitor section
[ 34.887] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 34.887] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 34.887] (--) intel(0): Output eDP1 using initial mode 1600x900 on pipe 0
[ 34.887] (==) intel(0): TearFree disabled
[ 34.887] (==) intel(0): DPI set to (96, 96)
[ 34.887] (II) Loading sub module "dri2"
[ 34.887] (II) LoadModule: "dri2"
[ 34.887] (II) Module "dri2" already built-in
[ 34.887] (II) Loading sub module "present"
[ 34.887] (II) LoadModule: "present"
[ 34.887] (II) Module "present" already built-in
[ 34.887] (II) UnloadModule: "modesetting"
[ 34.887] (II) Unloading modesetting
[ 34.887] (II) UnloadModule: "fbdev"
[ 34.887] (II) Unloading fbdev
[ 34.887] (II) UnloadSubModule: "fbdevhw"
[ 34.887] (II) Unloading fbdevhw
[ 34.887] (II) UnloadModule: "vesa"
[ 34.887] (II) Unloading vesa
[ 34.887] (==) Depth 24 pixmap format is 32 bpp
[ 34.906] (II) intel(0): SNA initialized with Haswell (gen7.5, gt2) backend
[ 34.906] (==) intel(0): Backing store enabled
[ 34.906] (==) intel(0): Silken mouse enabled
[ 34.907] (II) intel(0): HW Cursor enabled
[ 34.907] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 34.907] (==) intel(0): DPMS enabled
[ 34.907] (II) intel(0): [DRI2] Setup complete
[ 34.907] (II) intel(0): [DRI2] DRI driver: i965
[ 34.907] (II) intel(0): [DRI2] VDPAU driver: i965
[ 34.907] (II) intel(0): direct rendering: DRI2 enabled
[ 34.907] (II) intel(0): hardware support for Present enabled
[ 34.907] (==) intel(0): display hotplug detection enabled
[ 34.907] (--) RandR disabled
[ 35.085] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 35.085] (II) AIGLX: enabled GLX_ARB_create_context
[ 35.085] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 35.085] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 35.085] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 35.085] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 35.085] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 35.085] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 35.085] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 35.085] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 35.085] (II) AIGLX: Loaded and initialized i965
[ 35.085] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 35.087] (II) intel(0): switch to mode 1600x900@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 35.104] (II) intel(0): Setting screen physical size to 423 x 238
[ 35.208] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 35.225] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 35.225] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 35.225] (II) LoadModule: "evdev"
[ 35.225] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 35.268] (II) Module evdev: vendor="X.Org Foundation"
[ 35.268] compiled for 1.16.0, module version = 2.9.0
[ 35.268] Module class: X.Org XInput Driver
[ 35.268] ABI class: X.Org XInput driver, version 21.0
[ 35.268] (II) Using input driver 'evdev' for 'Power Button'
[ 35.268] (**) Power Button: always reports core events
[ 35.268] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 35.268] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 35.268] (--) evdev: Power Button: Found keys
[ 35.268] (II) evdev: Power Button: Configuring as keyboard
[ 35.268] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 35.268] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 35.268] (**) Option "xkb_rules" "evdev"
[ 35.268] (**) Option "xkb_model" "pc105"
[ 35.268] (**) Option "xkb_layout" "fr"
[ 35.270] (II) XKB: reuse xkmfile /var/lib/xkb/server-1CA37FD61409D6C1EDB80880DF2DB1A574556A6A.xkm
[ 35.270] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[ 35.270] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 35.270] (II) Using input driver 'evdev' for 'Video Bus'
[ 35.270] (**) Video Bus: always reports core events
[ 35.270] (**) evdev: Video Bus: Device: "/dev/input/event7"
[ 35.270] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 35.270] (--) evdev: Video Bus: Found keys
[ 35.270] (II) evdev: Video Bus: Configuring as keyboard
[ 35.270] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input8/event7"
[ 35.270] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 35.270] (**) Option "xkb_rules" "evdev"
[ 35.271] (**) Option "xkb_model" "pc105"
[ 35.271] (**) Option "xkb_layout" "fr"
[ 35.271] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[ 35.271] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 35.271] (II) Using input driver 'evdev' for 'Video Bus'
[ 35.271] (**) Video Bus: always reports core events
[ 35.271] (**) evdev: Video Bus: Device: "/dev/input/event6"
[ 35.271] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 35.271] (--) evdev: Video Bus: Found keys
[ 35.271] (II) evdev: Video Bus: Configuring as keyboard
[ 35.271] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:07/LNXVIDEO:00/input/input7/event6"
[ 35.271] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 35.271] (**) Option "xkb_rules" "evdev"
[ 35.271] (**) Option "xkb_model" "pc105"
[ 35.271] (**) Option "xkb_layout" "fr"
[ 35.271] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 35.271] (II) No input driver specified, ignoring this device.
[ 35.271] (II) This device may have been added with another device file.
[ 35.271] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 35.271] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 35.271] (II) Using input driver 'evdev' for 'Sleep Button'
[ 35.271] (**) Sleep Button: always reports core events
[ 35.271] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[ 35.271] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 35.271] (--) evdev: Sleep Button: Found keys
[ 35.271] (II) evdev: Sleep Button: Configuring as keyboard
[ 35.271] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[ 35.271] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 35.271] (**) Option "xkb_rules" "evdev"
[ 35.271] (**) Option "xkb_model" "pc105"
[ 35.271] (**) Option "xkb_layout" "fr"
[ 35.272] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event8)
[ 35.272] (II) No input driver specified, ignoring this device.
[ 35.272] (II) This device may have been added with another device file.
[ 35.272] (II) config/udev: Adding input device PixArt USB Optical Mouse (/dev/input/event5)
[ 35.272] (**) PixArt USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 35.272] (II) Using input driver 'evdev' for 'PixArt USB Optical Mouse'
[ 35.272] (**) PixArt USB Optical Mouse: always reports core events
[ 35.272] (**) evdev: PixArt USB Optical Mouse: Device: "/dev/input/event5"
[ 35.272] (--) evdev: PixArt USB Optical Mouse: Vendor 0x93a Product 0x2510
[ 35.272] (--) evdev: PixArt USB Optical Mouse: Found 3 mouse buttons
[ 35.272] (--) evdev: PixArt USB Optical Mouse: Found scroll wheel(s)
[ 35.272] (--) evdev: PixArt USB Optical Mouse: Found relative axes
[ 35.272] (--) evdev: PixArt USB Optical Mouse: Found x and y relative axes
[ 35.272] (II) evdev: PixArt USB Optical Mouse: Configuring as mouse
[ 35.272] (II) evdev: PixArt USB Optical Mouse: Adding scrollwheel support
[ 35.272] (**) evdev: PixArt USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 35.272] (**) evdev: PixArt USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 35.272] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:093A:2510.0001/input/input6/event5"
[ 35.272] (II) XINPUT: Adding extended input device "PixArt USB Optical Mouse" (type: MOUSE, id 10)
[ 35.272] (II) evdev: PixArt USB Optical Mouse: initialized for relative axes.
[ 35.272] (**) PixArt USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 35.272] (**) PixArt USB Optical Mouse: (accel) acceleration profile 0
[ 35.272] (**) PixArt USB Optical Mouse: (accel) acceleration factor: 2.000
[ 35.272] (**) PixArt USB Optical Mouse: (accel) acceleration threshold: 4
[ 35.272] (II) config/udev: Adding input device PixArt USB Optical Mouse (/dev/input/mouse1)
[ 35.272] (II) No input driver specified, ignoring this device.
[ 35.272] (II) This device may have been added with another device file.
[ 35.272] (II) config/udev: Adding input device USB Camera (/dev/input/event12)
[ 35.272] (**) USB Camera: Applying InputClass "evdev keyboard catchall"
[ 35.272] (II) Using input driver 'evdev' for 'USB Camera'
[ 35.272] (**) USB Camera: always reports core events
[ 35.272] (**) evdev: USB Camera: Device: "/dev/input/event12"
[ 35.272] (--) evdev: USB Camera: Vendor 0xbda Product 0x570c
[ 35.272] (--) evdev: USB Camera: Found keys
[ 35.272] (II) evdev: USB Camera: Configuring as keyboard
[ 35.272] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6:1.0/input/input13/event12"
[ 35.272] (II) XINPUT: Adding extended input device "USB Camera" (type: KEYBOARD, id 11)
[ 35.272] (**) Option "xkb_rules" "evdev"
[ 35.272] (**) Option "xkb_model" "pc105"
[ 35.272] (**) Option "xkb_layout" "fr"
[ 35.273] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event9)
[ 35.273] (II) No input driver specified, ignoring this device.
[ 35.273] (II) This device may have been added with another device file.
[ 35.273] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event10)
[ 35.273] (II) No input driver specified, ignoring this device.
[ 35.273] (II) This device may have been added with another device file.
[ 35.273] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event11)
[ 35.273] (**) Asus WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 35.273] (II) Using input driver 'evdev' for 'Asus WMI hotkeys'
[ 35.273] (**) Asus WMI hotkeys: always reports core events
[ 35.273] (**) evdev: Asus WMI hotkeys: Device: "/dev/input/event11"
[ 35.273] (--) evdev: Asus WMI hotkeys: Vendor 0 Product 0
[ 35.273] (--) evdev: Asus WMI hotkeys: Found keys
[ 35.273] (II) evdev: Asus WMI hotkeys: Configuring as keyboard
[ 35.273] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input12/event11"
[ 35.273] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 12)
[ 35.273] (**) Option "xkb_rules" "evdev"
[ 35.273] (**) Option "xkb_model" "pc105"
[ 35.273] (**) Option "xkb_layout" "fr"
[ 35.273] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[ 35.273] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 35.273] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 35.273] (**) AT Translated Set 2 keyboard: always reports core events
[ 35.273] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[ 35.273] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 35.273] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 35.273] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 35.273] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[ 35.273] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[ 35.273] (**) Option "xkb_rules" "evdev"
[ 35.273] (**) Option "xkb_model" "pc105"
[ 35.273] (**) Option "xkb_layout" "fr"
[ 35.274] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event4)
[ 35.274] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[ 35.274] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[ 35.274] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[ 35.274] (II) LoadModule: "synaptics"
[ 35.274] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 35.283] (II) Module synaptics: vendor="X.Org Foundation"
[ 35.283] compiled for 1.16.0, module version = 1.8.99
[ 35.283] Module class: X.Org XInput Driver
[ 35.283] ABI class: X.Org XInput driver, version 21.0
[ 35.283] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[ 35.283] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 35.283] (**) Option "Device" "/dev/input/event4"
[ 35.288] (II) synaptics: ETPS/2 Elantech Touchpad: found clickpad property
[ 35.288] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 3097 (res 31)
[ 35.288] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 2119 (res 32)
[ 35.288] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[ 35.288] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[ 35.288] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left double triple
[ 35.288] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[ 35.288] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 35.288] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 35.288] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 35.308] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event4"
[ 35.308] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 14)
[ 35.308] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[ 35.308] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
[ 35.308] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.053
[ 35.308] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[ 35.308] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[ 35.308] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[ 35.308] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[ 35.308] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 35.308] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
[ 35.308] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 43.624] (II) intel(0): EDID vendor "CMN", prod id 5928
[ 43.624] (II) intel(0): Printing DDC gathered Modelines:
[ 43.624] (II) intel(0): Modeline "1600x900"x0.0 107.80 1600 1648 1680 1940 900 903 908 926 +hsync -vsync (55.6 kHz eP)
[ 59.880] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 60.293] (II) XKB: reuse xkmfile /var/lib/xkb/server-4CCA0437B0B5529C7C44C7931A7373D005909F34.xkm
[ 60.323] (II) XKB: reuse xkmfile /var/lib/xkb/server-4CCA0437B0B5529C7C44C7931A7373D005909F34.xkm
[ 73.808] (II) XKB: reuse xkmfile /var/lib/xkb/server-500973B6F09A52700C4E9B62920EB235C5BB3956.xkm
[ 3298.158] (II) config/udev: Adding drm device (/dev/dri/card1) card1 /sys/devices/pci0000:00/0000:00:1c.4/0000:04:00.0/drm/card1
[ 3298.158] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 3298.158] (II) config/udev: Ignoring already known drm device (/dev/dri/card1)
[ 3298.159] removing GPU device /sys/devices/pci0000:00/0000:00:1c.4/0000:04:00.0/drm/card1 /dev/dri/card1
