Bonsoir,
Je suis néophyte en linux et j'appréhende petit à petit le système d'exploitation.
Je suis sur xubuntu. Informations sur ma machine :
cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=16.10
DISTRIB_CODENAME=yakkety
uname -r -m
4.8.0-59-generic i686
Informations USB :
lsusb
Bus 002 Device 003: ID 148f:7601 Ralink Technology, Corp. MT7601U Wireless Adapter
J'essaye depuis quelques jours d'avoir une connexion wifi grâce à une clé wifi
Totolink N150USM (Ralink Technology, Corp.
MT7601U Wireless Adapter).
J'ai donc procédé au téléchargement du pilote :
http://www.totolink.net/sub/product/detail.asp?product_num=100037
J'ai procédé à l'extraction de l'archive et je tombe sur un dossier avec un "Makefile" et un "readme".
Je me suis renseigné un peu sur la
compilation et j'ai cherché sur les forums si d'autres topics traitaient le même problème, notamment
celui-ci.
Malgré cela, rien de concluant.
Voici le readme en question :
=======================================================================
Build Instructions:
====================
1> $tar -xvzf DPB_RT2870_Linux_STA_x.x.x.x.tgz
go to "./DPB_RT2870_Linux_STA_x.x.x.x" directory.
2> In Makefile
set the "MODE = STA" in Makefile and chose the TARGET to Linux by set "TARGET = LINUX"
define the linux kernel source include file path LINUX_SRC
modify to meet your need.
3> In os/linux/config.mk
define the GCC and LD of the target machine
define the compiler flags CFLAGS
modify to meet your need.
** Build for being controlled by NetworkManager or wpa_supplicant wext functions
Please set 'HAS_WPA_SUPPLICANT=y' and 'HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=y'.
=> #>cd wpa_supplicant-x.x
=> #>./wpa_supplicant -Dwext -ira0 -c wpa_supplicant.conf -d
** Build for being controlled by WpaSupplicant with Ralink Driver
Please set 'HAS_WPA_SUPPLICANT=y' and 'HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=n'.
=> #>cd wpa_supplicant-0.5.7
=> #>./wpa_supplicant -Dralink -ira0 -c wpa_supplicant.conf -d
4> $make
# compile driver source code
# To fix "error: too few arguments to function Ḃċiwe_stream_add_event"
=> $patch -i os/linux/sta_ioctl.c.patch os/linux/sta_ioctl.c
5> $cp RT2870STA.dat /etc/Wireless/RT2870STA/RT2870STA.dat
6> load driver, go to "os/linux/" directory.
#[kernel 2.4]
# $/sbin/insmod rt2870sta.o
# $/sbin/ifconfig ra0 inet YOUR_IP up
#[kernel 2.6]
# $/sbin/insmod rt2870sta.ko
# $/sbin/ifconfig ra0 inet YOUR_IP up
7> unload driver
$/sbin/ifconfig ra0 down
$/sbin/rmmod rt2870sta
Etape 1, ok.
Etape 2, je ne comprends pas cela :
define the linux kernel source include file path LINUX_SRC
Etape 3, je n'ai pas touché au GC, LD et au CFLAGS. En revanche j'ai changé les valeurs de HAS_WPA_SUPPLICANT et HAS_NATIVE_WPA_SUPPLICANT_SUPPORT comme suggéré.
Je bloque donc à l'étape 4, celle de la compilation. J'ai tenté une compilation avec les commandes :
make
sudo checkinstall
À la fin de la compilation, quelques erreurs :
cc1: some warnings being treated as errors
scripts/Makefile.build:289 : la recette pour la cible « /home/massinealaver/Téléchargements/DPO_MT7601U_LinuxSTA_3.0.0.4_20130913/os/linux/../../sta/sync.o » a échouée
make[2]: *** [/home/massinealaver/Téléchargements/DPO_MT7601U_LinuxSTA_3.0.0.4_20130913/os/linux/../../sta/sync.o] Erreur 1
Makefile:1491 : la recette pour la cible « _module_/home/massinealaver/Téléchargements/DPO_MT7601U_LinuxSTA_3.0.0.4_20130913/os/linux » a échouée
make[1]: *** [_module_/home/massinealaver/Téléchargements/DPO_MT7601U_LinuxSTA_3.0.0.4_20130913/os/linux] Erreur 2
make[1] : on quitte le répertoire « /usr/src/linux-headers-4.8.0-59-generic »
Makefile:394 : la recette pour la cible « LINUX » a échouée
make: *** [LINUX] Erreur 2
Pouvez-vous me guider s'il vous plait ?
Je mets ici le code source du Makefile et du config.mk (après modification).
Makefile :
ifeq ($(WIFI_MODE),)
RT28xx_MODE = STA
else
RT28xx_MODE = $(WIFI_MODE)
endif
ifeq ($(TARGET),)
TARGET = LINUX
endif
ifeq ($(CHIPSET),)
CHIPSET = 7601U
endif
MODULE = $(word 1, $(CHIPSET))
#OS ABL - YES or NO
OSABL = NO
ifneq ($(TARGET),THREADX)
#RT28xx_DIR = home directory of RT28xx source code
RT28xx_DIR = $(shell pwd)
endif
include $(RT28xx_DIR)/os/linux/config.mk
RTMP_SRC_DIR = $(RT28xx_DIR)/RT$(MODULE)
#PLATFORM: Target platform
PLATFORM = PC
#PLATFORM = 5VT
#PLATFORM = IKANOS_V160
#PLATFORM = IKANOS_V180
#PLATFORM = SIGMA
#PLATFORM = SIGMA_8622
#PLATFORM = INIC
#PLATFORM = STAR
#PLATFORM = IXP
#PLATFORM = INF_TWINPASS
#PLATFORM = INF_DANUBE
#PLATFORM = INF_AR9
#PLATFORM = INF_VR9
#PLATFORM = BRCM_6358
#PLATFORM = INF_AMAZON_SE
#PLATFORM = CAVM_OCTEON
#PLATFORM = CMPC
#PLATFORM = RALINK_2880
#PLATFORM = RALINK_3052
#PLATFORM = SMDK
#PLATFORM = RMI
#PLATFORM = RMI_64
#PLATFORM = KODAK_DC
#PLATFORM = DM6446
#PLATFORM = FREESCALE8377
#PLATFORM = BL2348
#PLATFORM = BL23570
#PLATFORM = BLUBB
#PLATFORM = BLPMP
#PLATFORM = MT85XX
#PLATFORM = MT53XX
#PLATFORM = NXP_TV550
#PLATFORM = MVL5
#PLATFORM = RALINK_3352
#PLATFORM = UBICOM_IPX8
#PLATFORM = INTELP6
#PLATFORM = MSTARTV
#APSOC
ifeq ($(MODULE),3050)
PLATFORM = RALINK_3050
endif
ifeq ($(MODULE),3052)
PLATFORM = RALINK_3052
endif
ifeq ($(MODULE),3350)
PLATFORM = RALINK_3050
endif
ifeq ($(MODULE),3352)
PLATFORM = RALINK_3352
endif
#RELEASE Package
RELEASE = DPO
ifeq ($(TARGET),LINUX)
MAKE = make
endif
ifeq ($(TARGET), UCOS)
MAKE = make
endif
ifeq ($(TARGET),THREADX)
MAKE = gmake
endif
ifeq ($(TARGET), ECOS)
MAKE = make
MODULE = $(shell pwd | sed "s/.*\///" ).o
export MODULE
endif
ifeq ($(PLATFORM),5VT)
LINUX_SRC = /home/ralink-2860-sdk-5vt-distribution/linux-2.6.17
CROSS_COMPILE = /opt/crosstool/uClibc_v5te_le_gcc_4_1_1/bin/arm-linux-
endif
ifeq ($(PLATFORM),UBICOM_IPX8)
LINUX_SRC = /home/sample/Customers/UBICOM/ubicom-linux-dist-2.1.1/linux-2.6.x
CROSS_COMPILE = ubicom32-elf-
endif
ifeq ($(PLATFORM),IKANOS_V160)
LINUX_SRC = /home/sample/projects/LX_2618_RG_5_3_00r4_SRC/linux-2.6.18
CROSS_COMPILE = mips-linux-
endif
ifeq ($(PLATFORM),IKANOS_V180)
LINUX_SRC = /home/sample/projects/LX_BSP_VX180_5_4_0r1_ALPHA_26DEC07/linux-2.6.18
CROSS_COMPILE = mips-linux-
endif
ifeq ($(PLATFORM),SIGMA)
LINUX_SRC = /root/sigma/smp86xx_kernel_source_2.7.172.0/linux-2.6.15
CROSS_COMPILE = /root/sigma/smp86xx_toolchain_2.7.172.0/build_mipsel_nofpu/staging_dir/bin/mipsel-linux-
endif
ifeq ($(PLATFORM),SIGMA_8622)
LINUX_SRC = /home/snowpin/armutils_2.5.120.1/build_arm/linux-2.4.22-em86xx
CROSS_COMPILE = /home/snowpin/armutils_2.5.120.1/toolchain/bin/arm-elf-
CROSS_COMPILE_INCLUDE = /home/snowpin/armutils_2.5.120.1/toolchain/lib/gcc-lib/arm-elf/2.95.3
endif
ifeq ($(PLATFORM),INIC)
UCOS_SRC = /opt/uCOS/iNIC_rt2880
CROSS_COMPILE = /usr/bin/mipsel-linux-
endif
ifeq ($(PLATFORM),MSTARTV)
LINUX_SRC = /WIDI-SDK/WIDI_MSTAR/RedLion/2.6.35.11
CROSS_COMPILE = /WIDI-SDK/WIDI_MSTAR/arm-2010.09/bin/arm-none-linux-gnueabi-
endif
ifeq ($(PLATFORM),STAR)
LINUX_SRC = /opt/star/kernel/linux-2.4.27-star
CROSS_COMPILE = /opt/star/tools/arm-linux/bin/arm-linux-
endif
ifeq ($(PLATFORM),RMI)
LINUX_SRC = /opt/rmi/1.7.0/linux/src/
CROSS_COMPILE = /opt/rmi/1.7.0/mipscross/nptl/bin/mips64-unknown-linux-gnu-
endif
ifeq ($(PLATFORM),RMI_64)
LINUX_SRC = /opt/rmi/1.7.0/linux_64/src/
CROSS_COMPILE = /opt/rmi/1.7.0/mipscross/nptl/bin/mips64-unknown-linux-gnu-
endif
ifeq ($(PLATFORM), RALINK_2880)
LINUX_SRC = /project/stable/RT288x/RT288x_SDK/source/linux-2.4.x
CROSS_COMPILE = /opt/buildroot-gdb/bin/mipsel-linux-
endif
ifeq ($(PLATFORM),RALINK_3052)
LINUX_SRC = /home/peter/ap_soc/SDK_3_3_0_0/RT288x_SDK/source/linux-2.6.21.x
CROSS_COMPILE = /opt/buildroot-gcc342/bin/mipsel-linux-uclibc-
endif
ifeq ($(PLATFORM),FREESCALE8377)
LINUX_SRC = /opt/ltib-mpc8377_rds-20090309/rpm/BUILD/linux-2.6.25
CROSS_COMPILE = /opt/freescale/usr/local/gcc-4.2.187-eglibc-2.5.187/powerpc-linux-gnu/bin/powerpc-linux-gnu-
endif
ifeq ($(PLATFORM),BL2348)
LINUX_SRC = /home/sample/Customers/BroadLight/bl234x-linux-2.6.21-small-v29
CROSS_COMPILE = mips-wrs-linux-gnu-
endif
ifeq ($(PLATFORM),BL23570)
LINUX_SRC = /home/FIBERHOME/linux-2.6.34.8
CROSS_COMPILE = mips-wrs-linux-gnu-mips_74k_softfp-glibc_small-
ARCH:=mips
export $ARCH
endif
ifeq ($(PLATFORM),BLUBB)
LINUX_SRC = /home/sample/Customers/BroadLight/UBB/gmp20/linux-2.6.21-small
CROSS_COMPILE = mips-wrs-linux-gnu-
endif
ifeq ($(PLATFORM),BLPMP)
LINUX_SRC = /home/sample/Customers/BroadLight/UBB/pmp16/bl234x-linux-2.6.21-small-v30.2
CROSS_COMPILE = mips-wrs-linux-gnu-
endif
ifeq ($(PLATFORM),PC)
# Linux 2.6
LINUX_SRC = /lib/modules/$(shell uname -r)/build
# Linux 2.4 Change to your local setting
#LINUX_SRC = /usr/src/linux-2.4
LINUX_SRC_MODULE = /lib/modules/$(shell uname -r)/kernel/drivers/net/wireless/
CROSS_COMPILE =
endif
ifeq ($(PLATFORM),INTELP6)
LINUX_SRC = /tftpboot/IntelCE-20.0.11052.243193/project_build_i686/IntelCE/kernel-20.0.11024.238456/linux-2.6.35
CROSS_COMPILE = /tftpboot/IntelCE-20.0.11052.243193/build_i686/i686-linux-elf/bin/i686-cm-linux-
endif
ifeq ($(PLATFORM),IXP)
LINUX_SRC = /project/stable/Gmtek/snapgear-uclibc/linux-2.6.x
CROSS_COMPILE = arm-linux-
endif
ifeq ($(PLATFORM),INF_TWINPASS)
# Linux 2.6
#LINUX_SRC = /lib/modules/$(shell uname -r)/build
# Linux 2.4 Change to your local setting
LINUX_SRC = /project/stable/twinpass/release/2.0.1/source/kernel/opensource/linux-2.4.31/
CROSS_COMPILE = mips-linux-
endif
ifeq ($(PLATFORM),INF_DANUBE)
LINUX_SRC = /opt/danube/sdk/linux-2.6.16.x
CROSS_COMPILE = mips-linux-
ROOTDIR = /opt/danube/sdk
export ROOTDIR
endif
ifeq ($(PLATFORM),INF_AR9)
LINUX_SRC = /root/ar9/xR9_BSP1.2.2.0/source/kernel/opensource/linux-2.6.20/
CROSS_COMPILE = /root/ar9/ifx-lxdb26-1.0.2/gcc-3.4.4/toolchain-mips/bin/
endif
ifeq ($(PLATFORM),INF_VR9)
LINUX_SRC = /home/public/lantiq/VR9/UGW-4.2/build_dir/linux-ifxcpe_platform_vr9/linux-2.6.20.19
CROSS_COMPILE = /home/public/lantiq/VR9/UGW-4.2/staging_dir/toolchain-mips_gcc-3.4.6_uClibc-0.9.29/bin/mips-linux-
endif
ifeq ($(PLATFORM),BRCM_6358)
LINUX_SRC =
CROSS_COMPILE =
endif
ifeq ($(PLATFORM),INF_AMAZON_SE)
# Linux 2.6
#LINUX_SRC = /lib/modules/$(shell uname -r)/build
# Linux 2.4 Change to your local setting
LINUX_SRC = /backup/ifx/3.6.2.2/source/kernel/opensource/linux-2.4.31
#CROSS_COMPILE = mips-linux-
#LINUX_SRC = /project/Infineon/3.6.2.2/source/kernel/opensource/linux-2.4.31
CROSS_COMPILE = /opt/uclibc-toolchain/ifx-lxdb-1-2-3-external/gcc-3.3.6/toolchain-mips/R0208V35/mips-linux-uclibc/bin/
endif
ifeq ($(PLATFORM),ST)
LINUX_SRC = /opt/STM/STLinux-2.2/devkit/sources/kernel/linux0039
CROSS_COMPILE = /opt/STM/STLinux-2.2/devkit/sh4/bin/sh4-linux-
ARCH := sh
export ARCH
endif
ifeq ($(PLATFORM),CAVM_OCTEON)
OCTEON_ROOT = /usr/local/Cavium_Networks/OCTEON-SDK
LINUX_SRC = $(OCTEON_ROOT)/linux/kernel_2.6/linux
CROSS_COMPILE = mips64-octeon-linux-gnu-
endif
ifeq ($(PLATFORM),CMPC)
LINUX_SRC = /opt/fvt_11N_SDK_0807/fvt131x_SDK_11n/linux-2.6.17
CROSS_COMPILE =
endif
ifeq ($(PLATFORM),SMDK)
LINUX_SRC = /home/bhushan/itcenter/may28/linux-2.6-samsung
CROSS_COMPILE = /usr/local/arm/4.2.2-eabi/usr/bin/arm-linux-
endif
ifeq ($(PLATFORM),RALINK_3352)
LINUX_SRC = /home/sample/3352/RT288x_SDK/source/linux-2.6.21.x
CROSS_COMPILE = /opt/buildroot-gcc342/bin/mipsel-linux-
endif
ifeq ($(PLATFORM),KODAK_DC)
SKD_SRC = C:/SigmaTel/DC1250_SDK_v1-9/sdk
CROSS_COMPILE = $(cc)
endif
ifeq ($(PLATFORM),DM6446)
LINUX_SRC = /home/fonchi/work/soc/ti-davinci
endif
ifeq ($(PLATFORM),MT85XX)
LINUX_SRC = $(RT28xx_DIR)/../../../../build_linux
ifeq ($(CROSS_COMPILE),)
CROSS_COMPILE=armv7a-mediatek451_001_vfp-linux-gnueabi-
endif
CC=$(CROSS_COMPILE)gcc
$(warning =============================================)
$(warning CC=$(CC) for wifi driver)
$(warning =============================================)
endif
ifeq ($(PLATFORM),NXP_TV550)
LINUX_SRC = /data/tv550/kernel/linux-2.6.28.9
LINUX_SRC_MODULE = /data/tv550/kernel/linux-2.6.28.9/drivers/net/wireless
CROSS_COMPILE = /opt/embeddedalley/nxp_tv550/bin/mipsel-linux-
endif
ifeq ($(PLATFORM),MVL5)
LINUX_SRC = /home2/charlestu/AP-VT3426/linux-2.6.18
CROSS_COMPILE = /opt/montavista/pro/devkit/arm/v5t_le_mvl5/bin/arm_v5t_le-
endif
export OSABL RT28xx_DIR RT28xx_MODE LINUX_SRC CROSS_COMPILE CROSS_COMPILE_INCLUDE PLATFORM RELEASE CHIPSET MODULE RTMP_SRC_DIR LINUX_SRC_MODULE TARGET HAS_WOW_SUPPORT
# The targets that may be used.
PHONY += all build_tools test UCOS THREADX LINUX release prerelease clean uninstall install libwapi osabl
ifeq ($(TARGET),LINUX)
all: build_tools $(TARGET)
else
all: $(TARGET)
endif
build_tools:
$(MAKE) -C tools
$(RT28xx_DIR)/tools/bin2h
test:
$(MAKE) -C tools test
UCOS:
$(MAKE) -C os/ucos/ MODE=$(RT28xx_MODE)
echo $(RT28xx_MODE)
ECOS:
$(MAKE) -C os/ecos/ MODE=$(RT28xx_MODE)
cp -f os/ecos/$(MODULE) $(MODULE)
THREADX:
$(MAKE) -C $(RT28xx_DIR)/os/Threadx -f $(RT28xx_DIR)/os/ThreadX/Makefile
LINUX:
ifneq (,$(findstring 2.4,$(LINUX_SRC)))
ifeq ($(OSABL),YES)
cp -f os/linux/Makefile.4.util $(RT28xx_DIR)/os/linux/Makefile
$(MAKE) -C $(RT28xx_DIR)/os/linux/
endif
cp -f os/linux/Makefile.4 $(RT28xx_DIR)/os/linux/Makefile
$(MAKE) -C $(RT28xx_DIR)/os/linux/
ifeq ($(OSABL),YES)
cp -f os/linux/Makefile.4.netif $(RT28xx_DIR)/os/linux/Makefile
$(MAKE) -C $(RT28xx_DIR)/os/linux/
endif
ifeq ($(RT28xx_MODE),AP)
cp -f $(RT28xx_DIR)/os/linux/rt$(MODULE)ap.o /tftpboot
ifeq ($(OSABL),YES)
cp -f $(RT28xx_DIR)/os/linux/rtutil$(MODULE)ap.o /tftpboot
cp -f $(RT28xx_DIR)/os/linux/rtnet$(MODULE)ap.o /tftpboot
endif
ifeq ($(PLATFORM),INF_AMAZON_SE)
cp -f /tftpboot/rt2870ap.o /backup/ifx/build/root_filesystem/lib/modules/2.4.31-Amazon_SE-3.6.2.2-R0416_Ralink/kernel/drivers/net
endif
else
ifeq ($(RT28xx_MODE),APSTA)
cp -f $(RT28xx_DIR)/os/linux/rt$(MODULE)apsta.o /tftpboot
ifeq ($(OSABL),YES)
cp -f $(RT28xx_DIR)/os/linux/rtutil$(MODULE)apsta.o /tftpboot
cp -f $(RT28xx_DIR)/os/linux/rtnet$(MODULE)apsta.o /tftpboot
endif
else
cp -f $(RT28xx_DIR)/os/linux/rt$(MODULE)sta.o /tftpboot
ifeq ($(OSABL),YES)
cp -f $(RT28xx_DIR)/os/linux/rtutil$(MODULE)sta.o /tftpboot
cp -f $(RT28xx_DIR)/os/linux/rtnet$(MODULE)sta.o /tftpboot
endif
endif
endif
else
ifeq ($(OSABL),YES)
cp -f os/linux/Makefile.6.util $(RT28xx_DIR)/os/linux/Makefile
$(MAKE) -C $(LINUX_SRC) SUBDIRS=$(RT28xx_DIR)/os/linux modules
endif
cp -f os/linux/Makefile.6 $(RT28xx_DIR)/os/linux/Makefile
ifeq ($(PLATFORM),DM6446)
$(MAKE) ARCH=arm CROSS_COMPILE=arm_v5t_le- -C $(LINUX_SRC) SUBDIRS=$(RT28xx_DIR)/os/linux modules
else
ifeq ($(PLATFORM),FREESCALE8377)
$(MAKE) ARCH=powerpc CROSS_COMPILE=$(CROSS_COMPILE) -C $(LINUX_SRC) SUBDIRS=$(RT28xx_DIR)/os/linux modules
else
$(MAKE) -C $(LINUX_SRC) SUBDIRS=$(RT28xx_DIR)/os/linux modules
endif
endif
ifeq ($(OSABL),YES)
cp -f os/linux/Makefile.6.netif $(RT28xx_DIR)/os/linux/Makefile
$(MAKE) -C $(LINUX_SRC) SUBDIRS=$(RT28xx_DIR)/os/linux modules
endif
ifeq ($(RT28xx_MODE),AP)
ifneq ($(findstring 7601,$(CHIPSET)),)
cp -f $(RT28xx_DIR)/os/linux/mt$(MODULE)ap.ko /tftpboot
else
cp -f $(RT28xx_DIR)/os/linux/rt$(MODULE)ap.ko /tftpboot
endif
ifeq ($(OSABL),YES)
cp -f $(RT28xx_DIR)/os/linux/rtutil$(MODULE)ap.ko /tftpboot
cp -f $(RT28xx_DIR)/os/linux/rtnet$(MODULE)ap.ko /tftpboot
endif
rm -f os/linux/rt$(MODULE)ap.ko.lzma
/root/bin/lzma e os/linux/rt$(MODULE)ap.ko os/linux/rt$(MODULE)ap.ko.lzma
else
ifeq ($(RT28xx_MODE),APSTA)
cp -f $(RT28xx_DIR)/os/linux/rt$(MODULE)apsta.ko /tftpboot
ifeq ($(OSABL),YES)
cp -f $(RT28xx_DIR)/os/linux/rtutil$(MODULE)apsta.ko /tftpboot
cp -f $(RT28xx_DIR)/os/linux/rtnet$(MODULE)apsta.ko /tftpboot
endif
else
ifneq ($(findstring 7601,$(CHIPSET)),)
cp -f $(RT28xx_DIR)/os/linux/mt$(MODULE)sta.ko /tftpboot 2>/dev/null || :
else
cp -f $(RT28xx_DIR)/os/linux/rt$(MODULE)sta.ko /tftpboot 2>/dev/null || :
endif
ifeq ($(OSABL),YES)
ifneq ($(findstring 7601,$(CHIPSET)),)
cp -f $(RT28xx_DIR)/os/linux/mtutil$(MODULE)sta.ko /tftpboot 2>/dev/null || :
cp -f $(RT28xx_DIR)/os/linux/mtnet$(MODULE)sta.ko /tftpboot 2>/dev/null || :
else
cp -f $(RT28xx_DIR)/os/linux/rtutil$(MODULE)sta.ko /tftpboot 2>/dev/null || :
cp -f $(RT28xx_DIR)/os/linux/rtnet$(MODULE)sta.ko /tftpboot 2>/dev/null || :
endif
endif
ifeq ($(PLATFORM),MT85XX)
cp -f $(RT28xx_DIR)/os/linux/rtsta.ko $(RT28xx_DIR)/../../../../../BDP_Generic/build_linux_ko/src/driver/wlan/
endif
endif
endif
endif
release: build_tools
$(MAKE) -C $(RT28xx_DIR)/striptool -f Makefile.release clean
$(MAKE) -C $(RT28xx_DIR)/striptool -f Makefile.release
striptool/striptool.out
ifeq ($(RELEASE), DPO)
gcc -o striptool/banner striptool/banner.c
./striptool/banner -b striptool/copyright.gpl -s DPO/ -d DPO_GPL -R
./striptool/banner -b striptool/copyright.frm -s DPO_GPL/include/firmware.h
endif
prerelease:
ifeq ($(MODULE), 2880)
$(MAKE) -C $(RT28xx_DIR)/os/linux -f Makefile.release.2880 prerelease
else
$(MAKE) -C $(RT28xx_DIR)/os/linux -f Makefile.release prerelease
endif
cp $(RT28xx_DIR)/os/linux/Makefile.DPB $(RTMP_SRC_DIR)/os/linux/.
cp $(RT28xx_DIR)/os/linux/Makefile.DPA $(RTMP_SRC_DIR)/os/linux/.
cp $(RT28xx_DIR)/os/linux/Makefile.DPC $(RTMP_SRC_DIR)/os/linux/.
ifeq ($(RT28xx_MODE),STA)
cp $(RT28xx_DIR)/os/linux/Makefile.DPD $(RTMP_SRC_DIR)/os/linux/.
cp $(RT28xx_DIR)/os/linux/Makefile.DPO $(RTMP_SRC_DIR)/os/linux/.
endif
clean:
ifeq ($(TARGET), LINUX)
cp -f os/linux/Makefile.clean os/linux/Makefile
$(MAKE) -C os/linux clean
rm -rf os/linux/Makefile
endif
ifeq ($(TARGET), UCOS)
$(MAKE) -C os/ucos clean MODE=$(RT28xx_MODE)
endif
ifeq ($(TARGET), ECOS)
$(MAKE) -C os/ecos clean MODE=$(RT28xx_MODE)
endif
uninstall:
ifeq ($(TARGET), LINUX)
ifneq (,$(findstring 2.4,$(LINUX_SRC)))
$(MAKE) -C $(RT28xx_DIR)/os/linux -f Makefile.4 uninstall
else
$(MAKE) -C $(RT28xx_DIR)/os/linux -f Makefile.6 uninstall
endif
endif
install:
ifeq ($(TARGET), LINUX)
ifneq (,$(findstring 2.4,$(LINUX_SRC)))
$(MAKE) -C $(RT28xx_DIR)/os/linux -f Makefile.4 install
else
$(MAKE) -C $(RT28xx_DIR)/os/linux -f Makefile.6 install
endif
endif
libwapi:
ifneq (,$(findstring 2.4,$(LINUX_SRC)))
cp -f os/linux/Makefile.libwapi.4 $(RT28xx_DIR)/os/linux/Makefile
$(MAKE) -C $(RT28xx_DIR)/os/linux/
else
cp -f os/linux/Makefile.libwapi.6 $(RT28xx_DIR)/os/linux/Makefile
$(MAKE) -C $(LINUX_SRC) SUBDIRS=$(RT28xx_DIR)/os/linux modules
endif
osutil:
ifeq ($(OSABL),YES)
ifneq (,$(findstring 2.4,$(LINUX_SRC)))
cp -f os/linux/Makefile.4.util $(RT28xx_DIR)/os/linux/Makefile
$(MAKE) -C $(RT28xx_DIR)/os/linux/
else
cp -f os/linux/Makefile.6.util $(RT28xx_DIR)/os/linux/Makefile
$(MAKE) -C $(LINUX_SRC) SUBDIRS=$(RT28xx_DIR)/os/linux modules
endif
endif
osnet:
ifeq ($(OSABL),YES)
ifneq (,$(findstring 2.4,$(LINUX_SRC)))
cp -f os/linux/Makefile.4.netif $(RT28xx_DIR)/os/linux/Makefile
$(MAKE) -C $(RT28xx_DIR)/os/linux/
else
cp -f os/linux/Makefile.6.netif $(RT28xx_DIR)/os/linux/Makefile
$(MAKE) -C $(LINUX_SRC) SUBDIRS=$(RT28xx_DIR)/os/linux modules
endif
endif
osdrv:
ifneq (,$(findstring 2.4,$(LINUX_SRC)))
cp -f os/linux/Makefile.4 $(RT28xx_DIR)/os/linux/Makefile
$(MAKE) -C $(RT28xx_DIR)/os/linux/
else
cp -f os/linux/Makefile.6 $(RT28xx_DIR)/os/linux/Makefile
$(MAKE) -C $(LINUX_SRC) SUBDIRS=$(RT28xx_DIR)/os/linux modules
endif
# Declare the contents of the .PHONY variable as phony. We keep that information in a variable
.PHONY: $(PHONY)
config.mk :
# Support ATE function
HAS_ATE=n
# Support QA ATE function
HAS_QA_SUPPORT=n
HAS_RSSI_FEEDBACK=n
# Support XLINK mode
HAS_XLINK=n
HAS_NINTENDO=n
# Support LLTD function
HAS_LLTD=n
# Support WDS function
HAS_WDS=n
# Support AP-Client function
HAS_APCLI=n
# Support Wpa_Supplicant
# i.e. wpa_supplicant -Dralink
HAS_WPA_SUPPLICANT=y
# Support Native WpaSupplicant for Network Maganger
# i.e. wpa_supplicant -Dwext
HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=y
#Support Net interface block while Tx-Sw queue full
HAS_BLOCK_NET_IF=n
#Support IGMP-Snooping function.
HAS_IGMP_SNOOP_SUPPORT=n
#Support DFS function
HAS_DFS_SUPPORT=n
#Support Carrier-Sense function
HAS_CS_SUPPORT=n
ifeq ($(PLATFORM),MT85XX)
#Support HE_SUPPORT
HAS_HE_SUPPORT=y
HAS_HE_BD_SUPPORT=y
endif
ifeq ($(PLATFORM),MT53XX)
#Support HE_SUPPORT
HAS_HE_SUPPORT=y
HAS_HE_TV_SUPPORT=y
HAS_RESPOND_P2P_PROBE_REQ_WHEN_INFRA_CONNECTED=y
endif
#Support WEPAUTO mode try Open first then shared
HAS_WEPAUTO_OPEN_FIRST_SUPPORT=n
# Support user specific transmit rate of Multicast packet.
HAS_MCAST_RATE_SPECIFIC_SUPPORT=n
# Support for Multiple Cards
HAS_MC_SUPPORT=n
#Support for PCI-MSI
HAS_MSI_SUPPORT=n
#Support for IEEE802.11e DLS
HAS_QOS_DLS_SUPPORT=n
#Support for EXT_CHANNEL
HAS_EXT_BUILD_CHANNEL_LIST=n
#Support for IDS
HAS_IDS_SUPPORT=n
#Support for Net-SNMP
HAS_SNMP_SUPPORT=n
#Support features of 802.11n Draft3
HAS_DOT11N_DRAFT3_SUPPORT=y
#Support features of Single SKU.
HAS_SINGLE_SKU_SUPPORT=n
#Support features of Single SKU.
HAS_SINGLE_SKU_V2_SUPPORT=n
#Support features of 802.11n
HAS_DOT11_N_SUPPORT=y
#Support for 802.11ac VHT
HAS_DOT11_VHT_SUPPORT=n
#Support for 2860/2880 co-exist
HAS_RT2880_RT2860_COEXIST=n
HAS_KTHREAD_SUPPORT=n
#Support for WiFi Display
HAS_WFD_SUPPORT=n
#Support for Auto channel select enhance
HAS_AUTO_CH_SELECT_ENHANCE=n
#Support statistics count
HAS_STATS_COUNT=y
#Support TSSI Antenna Variation
HAS_TSSI_ANTENNA_VARIATION=n
#Support USB_BULK_BUF_ALIGMENT
HAS_USB_BULK_BUF_ALIGMENT=n
#Support for USB_SUPPORT_SELECTIVE_SUSPEND
HAS_USB_SUPPORT_SELECTIVE_SUSPEND=n
#Support USB load firmware by multibyte
HAS_USB_FIRMWARE_MULTIBYTE_WRITE=n
#Support ANDROID_SUPPORT
HAS_ANDROID_SUPPORT=n
#HAS_IFUP_IN_PROBE_SUPPORT
HAS_IFUP_IN_PROBE_SUPPORT=n
#Support TXRX SW Antenna Diversity
HAS_TXRX_SW_ANTDIV_SUPPORT=n
#Client support WDS function
HAS_CLIENT_WDS_SUPPORT=n
#Support for Bridge Fast Path & Bridge Fast Path function open to other module
HAS_BGFP_SUPPORT=n
HAS_BGFP_OPEN_SUPPORT=n
# Support HOSTAPD function
HAS_HOSTAPD_SUPPORT=n
#Support GreenAP function
HAS_GREENAP_SUPPORT=n
#Support MAC80211 LINUX-only function
#Please make sure the version for CFG80211.ko and MAC80211.ko is same as the one
#our driver references to.
HAS_CFG80211_SUPPORT=n
#Support RFKILL hardware block/unblock LINUX-only function
HAS_RFKILL_HW_SUPPORT=n
HAS_APCLI_WPA_SUPPLICANT=n
HAS_RTMP_FLASH_SUPPORT=n
ifeq ($(OSABL),YES)
HAS_OSABL_FUNC_SUPPORT=y
HAS_OSABL_OS_PCI_SUPPORT=y
HAS_OSABL_OS_USB_SUPPORT=y
HAS_OSABL_OS_RBUS_SUPPORT=n
HAS_OSABL_OS_AP_SUPPORT=y
HAS_OSABL_OS_STA_SUPPORT=y
endif
HAS_LED_CONTROL_SUPPORT=n
#Support WIDI feature
#Must enable HAS_WSC at the same time.
HAS_TXBF_SUPPORT=n
HAS_STREAM_MODE_SUPPORT=n
HAS_NEW_RATE_ADAPT_SUPPORT=n
HAS_RATE_ADAPT_AGS_SUPPORT=n
#MT7601
HAS_RX_CSO_SUPPORT=y
HAS_WOW_SUPPORT=n
HAS_WOW_IFDOWN_SUPPORT=n
HAS_NEW_WOW_SUPPORT=n
HAS_ANDES_FIRMWARE_SUPPORT=n
HAS_HDR_TRANS_SUPPORT=n
HAS_MULTI_CHANNEL=n
HAS_MICROWAVE_OVEN_SUPPORT=n
HAS_WIFI_P2P_CONCURRENT_FAST_SCAN=n
#################################################
CC := $(CROSS_COMPILE)gcc
LD := $(CROSS_COMPILE)ld
WFLAGS := -DAGGREGATION_SUPPORT -DPIGGYBACK_SUPPORT -DWMM_SUPPORT -DLINUX -Wall -Wstrict-prototypes -Wno-trigraphs
WFLAGS += -DSYSTEM_LOG_SUPPORT -DRT28xx_MODE=$(RT28xx_MODE) -DCHIPSET=$(MODULE) -DRESOURCE_PRE_ALLOC
#WFLAGS += -DFPGA_MODE
WFLAGS += -I$(RT28xx_DIR)/include
ifeq ($(HAS_WIFI_P2P_CONCURRENT_FAST_SCAN),y)
WFLAGS += -DWIFI_P2P_CONCURRENT_FAST_SCAN
endif
ifeq ($(HAS_HE_SUPPORT),y)
WFLAGS += -DHE_SUPPORT
WFLAGS += -DIP_ASSEMBLY
endif
ifeq ($(HAS_HE_BD_SUPPORT),y)
WFLAGS += -DHE_BD_SUPPORT
endif
ifeq ($(HAS_RESPOND_P2P_PROBE_REQ_WHEN_INFRA_CONNECTED),y)
WFLAGS += -DRESPOND_P2P_PROBE_REQ_WHEN_INFRA_CONNECTED
endif
ifeq ($(HAS_WEPAUTO_OPEN_FIRST_SUPPORT),y)
WFLAGS += -DWEPAUTO_OPEN_FIRST
endif
ifeq ($(HAS_HE_TV_SUPPORT),y)
WFLAGS += -DHE_TV_SUPPORT
endif
ifeq ($(HAS_KTHREAD_SUPPORT),y)
WFLAGS += -DKTHREAD_SUPPORT
endif
ifeq ($(HAS_RTMP_FLASH_SUPPORT),y)
WFLAGS += -DRTMP_FLASH_SUPPORT
endif
ifeq ($(HAS_STREAM_MODE_SUPPORT),y)
WFLAGS += -DSTREAM_MODE_SUPPORT
endif
ifeq ($(HAS_SINGLE_SKU_SUPPORT),y)
WFLAGS += -DSINGLE_SKU
endif
ifeq ($(HAS_SINGLE_SKU_V2_SUPPORT),y)
WFLAGS += -DSINGLE_SKU_V2
endif
ifeq ($(HAS_DOT11_VHT_SUPPORT),y)
WFLAGS += -DDOT11_VHT_AC
endif
ifeq ($(HAS_ANDES_FIRMWARE_SUPPORT),y)
WFLAGS += -DANDES_FIRMWARE_SUPPORT
endif
ifeq ($(HAS_HDR_TRANS_SUPPORT),y)
WFLAGS += -DHDR_TRANS_SUPPORT
endif
#################################################
# config for STA mode
ifeq ($(RT28xx_MODE),STA)
WFLAGS += -DCONFIG_STA_SUPPORT -DSCAN_SUPPORT -DDBG
ifeq ($(HAS_XLINK),y)
WFLAGS += -DXLINK_SUPPORT
endif
ifeq ($(HAS_WPA_SUPPLICANT),y)
WFLAGS += -DWPA_SUPPLICANT_SUPPORT
ifeq ($(HAS_NATIVE_WPA_SUPPLICANT_SUPPORT),y)
WFLAGS += -DNATIVE_WPA_SUPPLICANT_SUPPORT
endif
endif
ifeq ($(HAS_ATE),y)
WFLAGS += -DRALINK_ATE
WFLAGS += -DCONFIG_RT2880_ATE_CMD_NEW
WFLAGS += -I$(RT28xx_DIR)/ate/include
ifeq ($(HAS_QA_SUPPORT),y)
WFLAGS += -DRALINK_QA
endif
endif
ifeq ($(HAS_SNMP_SUPPORT),y)
WFLAGS += -DSNMP_SUPPORT
endif
ifeq ($(HAS_QOS_DLS_SUPPORT),y)
WFLAGS += -DQOS_DLS_SUPPORT
endif
ifeq ($(HAS_DOT11_N_SUPPORT),y)
WFLAGS += -DDOT11_N_SUPPORT
ifeq ($(HAS_DOT11N_DRAFT3_SUPPORT),y)
WFLAGS += -DDOT11N_DRAFT3
endif
ifeq ($(HAS_TXBF_SUPPORT),y)
WFLAGS += -DTXBF_SUPPORT
endif
ifeq ($(HAS_NEW_RATE_ADAPT_SUPPORT),y)
WFLAGS += -DNEW_RATE_ADAPT_SUPPORT
endif
endif
ifeq ($(HAS_MULTI_CHANNEL),y)
HAS_P2P_SUPPORT=y
HAS_P2P_SPECIFIC_WIRELESS_EVENT=y
WFLAGS += -DCONFIG_MULTI_CHANNEL
endif
ifeq ($(HAS_WFD_SUPPORT),y)
HAS_P2P_SUPPORT=y
HAS_P2P_SPECIFIC_WIRELESS_EVENT=y
WFLAGS += -DWFD_SUPPORT
endif
ifeq ($(HAS_CS_SUPPORT),y)
WFLAGS += -DCARRIER_DETECTION_SUPPORT
endif
ifeq ($(HAS_STATS_COUNT),y)
WFLAGS += -DSTATS_COUNT_SUPPORT
endif
ifeq ($(HAS_TSSI_ANTENNA_VARIATION),y)
WFLAGS += -DTSSI_ANTENNA_VARIATION
endif
ifeq ($(HAS_ANDROID_SUPPORT),y)
WFLAGS += -DANDROID_SUPPORT
endif
ifeq ($(HAS_IFUP_IN_PROBE_SUPPORT),y)
WFLAGS += -DIFUP_IN_PROBE
endif
ifeq ($(HAS_USB_SUPPORT_SELECTIVE_SUSPEND),y)
WFLAGS += -DUSB_SUPPORT_SELECTIVE_SUSPEND
endif
ifeq ($(HAS_USB_FIRMWARE_MULTIBYTE_WRITE),y)
WFLAGS += -DUSB_FIRMWARE_MULTIBYTE_WRITE -DMULTIWRITE_BYTES=4
endif
ifeq ($(HAS_CFG80211_SUPPORT),y)
WFLAGS += -DRT_CFG80211_SUPPORT -DEXT_BUILD_CHANNEL_LIST
ifeq ($(HAS_RFKILL_HW_SUPPORT),y)
WFLAGS += -DRFKILL_HW_SUPPORT
endif
endif
ifeq ($(OSABL),YES)
WFLAGS += -DOS_ABL_SUPPORT
ifeq ($(HAS_OSABL_FUNC_SUPPORT),y)
WFLAGS += -DOS_ABL_FUNC_SUPPORT
endif
ifeq ($(HAS_OSABL_OS_PCI_SUPPORT),y)
WFLAGS += -DOS_ABL_OS_PCI_SUPPORT
endif
ifeq ($(HAS_OSABL_OS_USB_SUPPORT),y)
WFLAGS += -DOS_ABL_OS_USB_SUPPORT
endif
ifeq ($(HAS_OSABL_OS_RBUS_SUPPORT),y)
WFLAGS += -DOS_ABL_OS_RBUS_SUPPORT
endif
ifeq ($(HAS_OSABL_OS_AP_SUPPORT),y)
WFLAGS += -DOS_ABL_OS_AP_SUPPORT
endif
ifeq ($(HAS_OSABL_OS_STA_SUPPORT),y)
WFLAGS += -DOS_ABL_OS_STA_SUPPORT
endif
endif
ifeq ($(HAS_TXRX_SW_ANTDIV_SUPPORT),y)
WFLAGS += -DTXRX_SW_ANTDIV_SUPPORT
endif
ifeq ($(HAS_WIDI_SUPPORT),y)
WFLAGS += -DWIDI_SUPPORT
ifeq ($(HAS_INTEL_L2SD_TOGGLE_SCAN_SUPPORT),y)
WFLAGS += -DINTEL_L2SD_TOGGLE_SCAN_SUPPORT
endif
ifeq ($(HAS_WIDI_GEN4_SUPPORT),y)
WFLAGS += -DWIDI_GEN4_SUPPORT
endif
ifeq ($(HAS_P2P_SUPPORT),y)
ifeq ($(HAS_INTEL_WFD_SUPPORT),y)
WFLAGS += -DINTEL_WFD_SUPPORT
endif
ifeq ($(HAS_WFA_WFD_SUPPORT),y)
WFLAGS += -DWFA_WFD_SUPPORT
endif
endif
endif
ifeq ($(HAS_WOW_SUPPORT),y)
WFLAGS += -DWOW_SUPPORT
endif
ifeq ($(HAS_WOW_IFDOWN_SUPPORT),y)
WFLAGS += -DWOW_IFDOWN_SUPPORT
endif
ifeq ($(HAS_NEW_WOW_SUPPORT),y)
WFLAGS += -DNEW_WOW_SUPPORT
endif
endif
# endif of ifeq ($(RT28xx_MODE),STA)
#################################################
#################################################
#
# Common compiler flag
#
ifeq ($(HAS_EXT_BUILD_CHANNEL_LIST),y)
WFLAGS += -DEXT_BUILD_CHANNEL_LIST
endif
ifeq ($(HAS_IDS_SUPPORT),y)
WFLAGS += -DIDS_SUPPORT
endif
ifeq ($(OSABL),YES)
WFLAGS += -DEXPORT_SYMTAB
endif
ifeq ($(HAS_CLIENT_WDS_SUPPORT),y)
WFLAGS += -DCLIENT_WDS
endif
ifeq ($(HAS_BGFP_SUPPORT),y)
WFLAGS += -DBG_FT_SUPPORT
endif
ifeq ($(HAS_BGFP_OPEN_SUPPORT),y)
WFLAGS += -DBG_FT_OPEN_SUPPORT
endif
ifeq ($(HAS_LED_CONTROL_SUPPORT),y)
WFLAGS += -DLED_CONTROL_SUPPORT
endif
ifeq ($(HAS_MICROWAVE_OVEN_SUPPORT),y)
WFLAGS += -DMICROWAVE_OVEN_SUPPORT
endif
#################################################
# ChipSet specific definitions.
#
ifneq ($(findstring 2860,$(CHIPSET)),)
WFLAGS +=-DRTMP_MAC_PCI -DRTMP_PCI_SUPPORT -DRT2860 -DRT28xx -DA_BAND_SUPPORT
CHIPSET_DAT = 2860
endif
ifneq ($(findstring 3090,$(CHIPSET)),)
WFLAGS +=-DRTMP_MAC_PCI -DRT30xx -DRT3090 -DRTMP_PCI_SUPPORT -DRTMP_RF_RW_SUPPORT -DRTMP_EFUSE_SUPPORT -DVCORECAL_SUPPORT
CHIPSET_DAT = 2860
endif
ifneq ($(findstring 2870,$(CHIPSET)),)
WFLAGS +=-DRTMP_MAC_USB -DRTMP_USB_SUPPORT -DRT2870 -DRT28xx -DRTMP_TIMER_TASK_SUPPORT -DA_BAND_SUPPORT
CHIPSET_DAT = 2870
endif
ifneq ($(findstring 2070,$(CHIPSET)),)
WFLAGS +=-DRTMP_MAC_USB -DRT30xx -DRT3070 -DRT2070 -DRTMP_USB_SUPPORT -DRTMP_TIMER_TASK_SUPPORT -DRTMP_RF_RW_SUPPORT -DRTMP_EFUSE_SUPPORT
CHIPSET_DAT = 2870
endif
ifneq ($(findstring 3070,$(CHIPSET)),)
WFLAGS +=-DRTMP_MAC_USB -DRT30xx -DRT3070 -DRTMP_USB_SUPPORT -DRTMP_TIMER_TASK_SUPPORT -DRTMP_RF_RW_SUPPORT -DRTMP_EFUSE_SUPPORT -DVCORECAL_SUPPORT
CHIPSET_DAT = 2870
ifneq ($(findstring $(RT28xx_MODE),AP),)
ifeq ($(HAS_CS_SUPPORT), y)
WFLAGS += -DCARRIER_DETECTION_FIRMWARE_SUPPORT
endif
endif
endif
ifneq ($(findstring 2880,$(CHIPSET)),)
WFLAGS += -DRT2880 -DRT28xx -DRTMP_MAC_PCI -DCONFIG_RALINK_RT2880_MP -DRTMP_RBUS_SUPPORT -DMERGE_ARCH_TEAM -DA_BAND_SUPPORT -DCONFIG_SWMCU_SUPPORT
ifeq ($(HAS_WIFI_LED_SHARE), y)
WFLAGS += -DCONFIG_WIFI_LED_SHARE
endif
endif
ifneq ($(findstring 3572,$(CHIPSET)),)
WFLAGS +=-DRTMP_MAC_USB -DRTMP_USB_SUPPORT -DRT2870 -DRT28xx -DRT30xx -DRT35xx -DRT3572 -DRTMP_TIMER_TASK_SUPPORT -DRTMP_RF_RW_SUPPORT -DRTMP_EFUSE_SUPPORT -DA_BAND_SUPPORT -DVCORECAL_SUPPORT
CHIPSET_DAT = 2870
ifneq ($(findstring $(RT28xx_MODE),AP),)
ifeq ($(HAS_CS_SUPPORT), y)
WFLAGS += -DCARRIER_DETECTION_FIRMWARE_SUPPORT
endif
endif
endif
ifneq ($(findstring 3573,$(CHIPSET)),)
WFLAGS += -DRTMP_MAC_USB -DRTMP_USB_SUPPORT -DRT30xx -DRT35xx -DRT3593 -DRT3573\
-DRTMP_TIMER_TASK_SUPPORT -DRTMP_RF_RW_SUPPORT -DRTMP_EFUSE_SUPPORT\
-DA_BAND_SUPPORT -DDOT11N_SS3_SUPPORT \
-DVCORECAL_SUPPORT -DNEW_MBSSID_MODE
#WFLAGS += -DNEW_RATE_ADAPT_SUPPORT
CHIPSET_DAT = 2870
ifneq ($(findstring $(RT28xx_MODE),STA APSTA),)
WFLAGS += -DRTMP_FREQ_CALIBRATION_SUPPORT
endif
ifneq ($(findstring $(RT28xx_MODE),AP),)
WFLAGS += -DSPECIFIC_BCN_BUF_SUPPORT
endif
ifneq ($(findstring $(RT28xx_MODE),AP),)
ifeq ($(HAS_CS_SUPPORT), y)
WFLAGS += -DCARRIER_DETECTION_FIRMWARE_SUPPORT
endif
endif
endif
ifneq ($(findstring 3062,$(CHIPSET)),)
WFLAGS +=-DRTMP_MAC_PCI -DRT2860 -DRT28xx -DRT30xx -DRT35xx -DRT3062 -DRTMP_PCI_SUPPORT -DRTMP_RF_RW_SUPPORT -DRTMP_EFUSE_SUPPORT -DVCORECAL_SUPPORT
CHIPSET_DAT = 2860
endif
ifneq ($(findstring 3562,$(CHIPSET)),)
WFLAGS +=-DRTMP_MAC_PCI -DRT2860 -DRT28xx -DRT30xx -DRT35xx -DRT3562 -DRTMP_PCI_SUPPORT -DRTMP_RF_RW_SUPPORT -DRTMP_EFUSE_SUPPORT -DA_BAND_SUPPORT -DVCORECAL_SUPPORT
CHIPSET_DAT = 2860
endif
ifneq ($(findstring 3593,$(CHIPSET)),)
WFLAGS +=-DRTMP_MAC_PCI -DDOT11N_SS3_SUPPORT -DRT3593 -DRT28xx -DRT30xx -DRT35xx -DRTMP_PCI_SUPPORT -DRTMP_RF_RW_SUPPORT -DRTMP_EFUSE_SUPPORT -DA_BAND_SUPPORT -DNEW_MBSSID_MODE -DVCORECAL_SUPPORT
#WFLAGS += -DNEW_RATE_ADAPT_SUPPORT
CHIPSET_DAT = 2860
ifneq ($(findstring $(RT28xx_MODE),STA APSTA),)
WFLAGS += -DRTMP_FREQ_CALIBRATION_SUPPORT
endif
ifneq ($(findstring $(RT28xx_MODE),AP),)
WFLAGS += -DSPECIFIC_BCN_BUF_SUPPORT
endif
endif
ifneq ($(findstring 3390,$(CHIPSET)),)
WFLAGS +=-DRTMP_MAC_PCI -DRT30xx -DRT33xx -DRT3090 -DRT3390 -DRTMP_PCI_SUPPORT -DRTMP_RF_RW_SUPPORT -DRTMP_EFUSE_SUPPORT -DRTMP_INTERNAL_TX_ALC -DVCORECAL_SUPPORT
CHIPSET_DAT = 2860
endif
ifneq ($(findstring 8592,$(CHIPSET)),)
WFLAGS += -DRT8592 -DRT65xx -DRLT_MAC -DRTMP_MAC_PCI -DRTMP_PCI_SUPPORT -DA_BAND_SUPPORT -DRX_DMA_SCATTER
WFLAGS += -DRTMP_RF_RW_SUPPORT -DIQ_CAL_SUPPORT -DVCORECAL_SUPPORT
#WFLAGS += -DRTMP_EFUSE_SUPPORT
ifneq ($(findstring $(RT28xx_MODE),AP),)
# TODO: shiang-6590, need to ask hardware about the memory base setting first!!
#WFLAGS += -DSPECIFIC_BCN_BUF_SUPPORT
endif
CHIPSET_DAT = 2860
endif
ifneq ($(findstring 6590,$(CHIPSET)),)
WFLAGS += -DRT6590 -DRT65xx -DRLT_MAC -DRLT_RF -DRTMP_MAC_PCI -DRTMP_PCI_SUPPORT -DA_BAND_SUPPORT -DRX_DMA_SCATTER
#-DRTMP_FREQ_CALIBRATION_SUPPORT -DVCORECAL_SUPPORT
ifneq ($(findstring $(RT28xx_MODE),AP),)
#WFLAGS += -DSPECIFIC_BCN_BUF_SUPPORT
endif
CHIPSET_DAT = 2860
endif
ifneq ($(findstring 6570,$(CHIPSET)),)
WFLAGS += -DRT6570 -DRT65xx -DRLT_MAC -DRLT_RF -DRTMP_MAC_USB -DRTMP_USB_SUPPORT -DRTMP_TIMER_TASK_SUPPORT -DA_BAND_SUPPORT -DRX_DMA_SCATTER -DRTMP_EFUSE_SUPPORT -DNEW_MBSSID_MODE
ifneq ($(findstring $(RT28xx_MODE),AP),)
#WFLAGS += -DSPECIFIC_BCN_BUF_SUPPORT
endif
ifeq ($(HAS_CSO_SUPPORT), y)
WFLAGS += -DCONFIG_CSO_SUPPORT
endif
ifeq ($(HAS_TSO_SUPPORT), y)
WFLAGS += -DCONFIG_CSO_SUPPORT -DCONFIG_TSO_SUPPORT -DTX_PKT_SG
endif
CHIPSET_DAT = 2870
endif
ifneq ($(findstring 7601E,$(CHIPSET)),)
WFLAGS += -DMT7601E -DMT7601 -DRLT_MAC -DRLT_RF -DRTMP_MAC_PCI -DRTMP_PCI_SUPPORT -DRX_DMA_SCATTER -DVCORECAL_SUPPORT -DVCORECAL_SUPPORT -DRTMP_EFUSE_SUPPORT -DhNEW_MBSSID_MODE -DRTMP_INTERNAL_TX_ALC -DCONFIG_ANDES_SUPPORT
#-DRTMP_FREQ_CALIBRATION_SUPPORT
ifneq ($(findstring $(RT28xx_MODE),AP),)
#WFLAGS += -DSPECIFIC_BCN_BUF_SUPPORT
endif
ifneq ($(findstring $(RT28xx_MODE),STA APSTA),)
WFLAGS += -DRTMP_FREQ_CALIBRATION_SUPPORT
endif
CHIPSET_DAT = 2860
endif
ifneq ($(findstring 7601U,$(CHIPSET)),)
WFLAGS += -DMT7601U -DMT7601 -DRLT_MAC -DRLT_RF -DRTMP_MAC_USB -DRTMP_USB_SUPPORT -DRTMP_TIMER_TASK_SUPPORT -DRX_DMA_SCATTER -DVCORECAL_SUPPORT -DRTMP_EFUSE_SUPPORT -DNEW_MBSSID_MODE -DRTMP_INTERNAL_TX_ALC -DCONFIG_ANDES_SUPPORT -DDPD_CALIBRATION_SUPPORT
ifneq ($(findstring $(RT28xx_MODE),AP),)
#WFLAGS += -DSPECIFIC_BCN_BUF_SUPPORT
endif
ifeq ($(HAS_RX_CSO_SUPPORT), y)
WFLAGS += -DCONFIG_RX_CSO_SUPPORT
endif
ifneq ($(findstring $(RT28xx_MODE),AP),)
else
WFLAGS += -DRTMP_FREQ_CALIBRATION_SUPPORT
endif
CHIPSET_DAT = 2870
endif
ifneq ($(findstring 3370,$(CHIPSET)),)
WFLAGS +=-DRTMP_MAC_USB -DRT30xx -DRT33xx -DRT3070 -DRT3370 -DRTMP_USB_SUPPORT -DRTMP_TIMER_TASK_SUPPORT -DRTMP_RF_RW_SUPPORT -DRTMP_EFUSE_SUPPORT -DRTMP_INTERNAL_TX_ALC -DVCORECAL_SUPPORT
CHIPSET_DAT = 2870
ifneq ($(findstring $(RT28xx_MODE),AP),)
ifeq ($(HAS_CS_SUPPORT), y)
WFLAGS += -DCARRIER_DETECTION_FIRMWARE_SUPPORT
endif
endif
endif
ifneq ($(findstring 5390,$(CHIPSET)),)
WFLAGS +=-DRTMP_MAC_PCI -DRT30xx -DRT33xx -DRT3090 -DRT3390 -DRT5390 -DRTMP_PCI_SUPPORT -DRTMP_RF_RW_SUPPORT -DRTMP_EFUSE_SUPPORT -DRTMP_FREQ_CALIBRATION_SUPPORT -DRTMP_INTERNAL_TX_ALC -DVCORECAL_SUPPORT -DIQ_CAL_SUPPORT -DNEW_MBSSID_MODE -DRTMP_TEMPERATURE_COMPENSATION -DRTMP_MAC
CHIPSET_DAT = 2860
ifneq ($(findstring $(RT28xx_MODE),AP),)
WFLAGS += -DSPECIFIC_BCN_BUF_SUPPORT
endif
endif
ifneq ($(findstring 5370,$(CHIPSET)),)
WFLAGS +=-DRTMP_MAC_USB -DRT30xx -DRT33xx -DRT3070 -DRT3370 -DRT5370 -DRTMP_USB_SUPPORT -DRTMP_TIMER_TASK_SUPPORT -DRTMP_RF_RW_SUPPORT -DRTMP_EFUSE_SUPPORT -DRTMP_INTERNAL_TX_ALC -DRTMP_FREQ_CALIBRATION_SUPPORT -DVCORECAL_SUPPORT -DIQ_CAL_SUPPORT -DNEW_MBSSID_MODE -DRTMP_TEMPERATURE_COMPENSATION -DRTMP_MAC
CHIPSET_DAT = 2870
ifneq ($(findstring $(RT28xx_MODE),AP),)
ifeq ($(HAS_CS_SUPPORT), y)
WFLAGS += -DCARRIER_DETECTION_FIRMWARE_SUPPORT
endif
endif
ifneq ($(findstring $(RT28xx_MODE),AP),)
WFLAGS += -DSPECIFIC_BCN_BUF_SUPPORT
endif
endif
ifneq ($(findstring 3052,$(CHIPSET)),)
WFLAGS += -DRTMP_MAC_PCI -DRTMP_RBUS_SUPPORT -DRT3052 -DRT305x -DRTMP_RF_RW_SUPPORT -DCONFIG_SWMCU_SUPPORT -DVCORECAL_SUPPORT
CHIPSET_DAT = 2870
ifeq ($(HAS_WIFI_LED_SHARE), y)
WFLAGS += -DCONFIG_WIFI_LED_SHARE
endif
endif
ifneq ($(findstring 3352,$(CHIPSET)),)
WFLAGS += -DRTMP_MAC_PCI -DRTMP_RBUS_SUPPORT -DRT3352 -DRT305x -DRTMP_RF_RW_SUPPORT -DVCORECAL_SUPPORT -DCONFIG_SWMCU_SUPPORT -DRTMP_INTERNAL_TX_ALC -DNEW_MBSSID_MODE
CHIPSET_DAT = 2860
ifeq ($(HAS_WIFI_LED_SHARE), y)
WFLAGS += -DCONFIG_WIFI_LED_SHARE
endif
ifneq ($(findstring $(RT28xx_MODE),AP),)
WFLAGS += -DSPECIFIC_BCN_BUF_SUPPORT
endif
endif
ifneq ($(findstring 5350,$(CHIPSET)),)
WFLAGS += -DRTMP_MAC_PCI -DRTMP_RBUS_SUPPORT -DRT5350 -DRT305x -DRT3050 -DRT3350 -DRTMP_RF_RW_SUPPORT -DVCORECAL_SUPPORT -DCONFIG_SWMCU_SUPPORT -DRTMP_INTERNAL_TX_ALC -DRTMP_FREQ_CALIBRATION_SUPPORT -DIQ_CAL_SUPPORT -DNEW_MBSSID_MODE
CHIPSET_DAT = 2860
ifeq ($(HAS_WIFI_LED_SHARE), y)
WFLAGS += -DCONFIG_WIFI_LED_SHARE
endif
ifneq ($(findstring $(RT28xx_MODE),AP),)
WFLAGS += -DSPECIFIC_BCN_BUF_SUPPORT
endif
endif
ifneq ($(findstring 5592,$(CHIPSET)),)
WFLAGS += -DRTMP_MAC_PCI -DRTMP_PCI_SUPPORT -DRT30xx -DRT5592\
-DRTMP_RF_RW_SUPPORT -DRTMP_EFUSE_SUPPORT\
-DA_BAND_SUPPORT -DIQ_CAL_SUPPORT -DRX_DMA_SCATTER -DVCORECAL_SUPPORT\
-DNEW_MBSSID_MODE -DRTMP_TEMPERATURE_COMPENSATION
CHIPSET_DAT = 2860
ifeq ($(HAS_CSO_SUPPORT), y)
WFLAGS += -DCONFIG_CSO_SUPPORT
endif
ifneq ($(findstring $(RT28xx_MODE),STA APSTA),)
WFLAGS += -DRTMP_FREQ_CALIBRATION_SUPPORT
endif
ifneq ($(findstring $(RT28xx_MODE),AP),)
WFLAGS += -DSPECIFIC_BCN_BUF_SUPPORT
endif
endif
ifneq ($(findstring 5572,$(CHIPSET)),)
WFLAGS += -DRTMP_MAC_USB -DRTMP_USB_SUPPORT -DRT30xx -DRT5572 -DRT5592\
-DRTMP_RF_RW_SUPPORT -DRTMP_EFUSE_SUPPORT -DNEW_MBSSID_MODE\
-DRTMP_TIMER_TASK_SUPPORT -DA_BAND_SUPPORT -DIQ_CAL_SUPPORT -DVCORECAL_SUPPORT\
-DRTMP_TEMPERATURE_COMPENSATION
CHIPSET_DAT = 2870
ifeq ($(HAS_CSO_SUPPORT), y)
WFLAGS += -DCONFIG_CSO_SUPPORT
endif
ifneq ($(findstring $(RT28xx_MODE),AP),)
ifeq ($(HAS_CS_SUPPORT), y)
WFLAGS += -DCARRIER_DETECTION_FIRMWARE_SUPPORT
endif
endif
ifneq ($(findstring $(RT28xx_MODE),STA APSTA),)
WFLAGS += -DRTMP_FREQ_CALIBRATION_SUPPORT
endif
ifneq ($(findstring $(RT28xx_MODE),AP),)
#WFLAGS += -DSPECIFIC_BCN_BUF_SUPPORT
endif
endif
ifneq ($(findstring 3290,$(CHIPSET)),)
WFLAGS += -DRTMP_MAC_PCI -DRTMP_PCI_SUPPORT -DRTMP_RF_RW_SUPPORT -DRTMP_EFUSE_SUPPORT -DRTMP_FREQ_CALIBRATION_SUPPORT -DRTMP_INTERNAL_TX_ALC -DRT30xx -DRT3290 -DVCORECAL_SUPPORT
CHIPSET_DAT = 2860
ifneq ($(findstring $(RT28xx_MODE),STA APSTA),)
WFLAGS += -DRTMP_FREQ_CALIBRATION_SUPPORT -DPCIE_PS_SUPPORT
endif
ifneq ($(findstring $(RT28xx_MODE),AP),)
WFLAGS += -DSPECIFIC_BCN_BUF_SUPPORT
endif
endif
ifeq ($(CHIPSET),USB)
#3572
WFLAGS +=-DRTMP_MAC_USB -DRTMP_USB_SUPPORT -DRT2870 -DRT28xx -DRT30xx -DRT35xx -DRTMP_TIMER_TASK_SUPPORT -DRTMP_RF_RW_SUPPORT -DRTMP_EFUSE_SUPPORT -DA_BAND_SUPPORT -DSPECIFIC_VCORECAL_SUPPORT
#3370
WFLAGS += -DRT33xx -DRT3070 -DRT3370 -DRTMP_TIMER_TASK_SUPPORT -DRTMP_INTERNAL_TX_ALC
CHIPSET_DAT = 2870
endif
ifeq ($(CHIPSET),PCI)
#3562
WFLAGS +=-DRTMP_MAC_PCI -DRT2860 -DRT28xx -DRT30xx -DRT35xx -DRTMP_PCI_SUPPORT -DRTMP_RF_RW_SUPPORT -DRTMP_EFUSE_SUPPORT -DA_BAND_SUPPORT -DSPECIFIC_VCORECAL_SUPPORT
#3390
WFLAGS +=-DRT33xx -DRT3090 -DRT3390 -DRTMP_INTERNAL_TX_ALC
endif
ifeq ($(CHIPSET),RBUS)
WFLAGS += -DMERGE_ARCH_TEAM -DCONFIG_SWMCU_SUPPORT -DCONFIG_RA_NAT_NONE -DRTMP_RBUS_SUPPORT
#5350, 3050, 3350, 3883
WFLAGS +=-DRTMP_MAC_PCI -DRT305x -DRT5350 -DRT3050 -DRT3350 -DRT3883 -DRTMP_PCI_SUPPORT -DRTMP_RF_RW_SUPPORT -DA_BAND_SUPPORT -DVCORECAL_SUPPORT
ifneq ($(findstring $(RT28xx_MODE),AP),)
WFLAGS += -DSPECIFIC_BCN_BUF_SUPPORT
endif
#WFLAGS += -DDBG_CTRL_SUPPORT
#WFLAGS += -DINCLUDE_DEBUG_QUEUE
#WFLAGS += -DRANGE_EXTEND -DCFO_TRACK -DPRE_ANT_SWITCH
endif
#################################################
ifeq ($(PLATFORM),5VT)
#WFLAGS += -DCONFIG_5VT_ENHANCE
endif
ifeq ($(HAS_BLOCK_NET_IF),y)
WFLAGS += -DBLOCK_NET_IF
endif
ifeq ($(HAS_DFS_SUPPORT),y)
WFLAGS += -DDFS_SUPPORT
endif
ifeq ($(HAS_MC_SUPPORT),y)
WFLAGS += -DMULTIPLE_CARD_SUPPORT
endif
ifeq ($(HAS_LLTD),y)
WFLAGS += -DLLTD_SUPPORT
endif
ifeq ($(PLATFORM),RMI)
WFLAGS += -DRT_BIG_ENDIAN
endif
ifeq ($(PLATFORM),UBICOM_IPX8)
WFLAGS += -DRT_BIG_ENDIAN -DUNALIGNMENT_SUPPORT -DPLATFORM_UBM_IPX8 -DNO_CONSISTENT_MEM_SUPPORT -DCACHE_LINE_32B
endif
ifeq ($(PLATFORM),BL2348)
WFLAGS += -DRT_BIG_ENDIAN
endif
ifeq ($(PLATFORM),BL23570)
WFLAGS += -DRT_BIG_ENDIAN
endif
ifeq ($(PLATFORM),BLUBB)
WFLAGS += -DRT_BIG_ENDIAN
endif
ifeq ($(PLATFORM),BLPMP)
WFLAGS += -DRT_BIG_ENDIAN
endif
ifeq ($(PLATFORM),RMI_64)
WFLAGS += -DRT_BIG_ENDIAN
endif
ifeq ($(PLATFORM),IXP)
WFLAGS += -DRT_BIG_ENDIAN
endif
ifeq ($(PLATFORM),IKANOS_V160)
WFLAGS += -DRT_BIG_ENDIAN -DIKANOS_VX_1X0
endif
ifeq ($(PLATFORM),IKANOS_V180)
WFLAGS += -DRT_BIG_ENDIAN -DIKANOS_VX_1X0
endif
ifeq ($(PLATFORM),INF_TWINPASS)
WFLAGS += -DRT_BIG_ENDIAN -DINF_TWINPASS
endif
ifeq ($(PLATFORM),INF_DANUBE)
ifneq (,$(findstring 2.4,$(LINUX_SRC)))
# Linux 2.4
WFLAGS += -DINF_DANUBE -DRT_BIG_ENDIAN
else
# Linux 2.6
WFLAGS += -DRT_BIG_ENDIAN
endif
endif
ifeq ($(PLATFORM),INF_AR9)
WFLAGS += -DRT_BIG_ENDIAN -DINF_AR9
# support MAPI function for AR9.
#WFLAGS += -DAR9_MAPI_SUPPORT
endif
ifeq ($(PLATFORM),INF_VR9)
WFLAGS += -DRT_BIG_ENDIAN -DINF_AR9 -DINF_VR9
endif
ifeq ($(PLATFORM),CAVM_OCTEON)
WFLAGS += -DRT_BIG_ENDIAN
endif
ifeq ($(PLATFORM),BRCM_6358)
WFLAGS += -DRT_BIG_ENDIAN -DBRCM_6358
endif
ifeq ($(PLATFORM),INF_AMAZON_SE)
WFLAGS += -DRT_BIG_ENDIAN -DINF_AMAZON_SE
endif
ifeq ($(PLATFORM),RALINK_3052)
WFLAGS += -DPLATFORM_RALINK_3052
endif
ifeq ($(PLATFORM),FREESCALE8377)
#EXTRA_CFLAGS := -v -I$(RT28xx_DIR)/include -I$(LINUX_SRC)/include $(WFLAGS)-O2 -Wall -Wstrict-prototypes -Wno-trigraphs
#export EXTRA_CFLAGS
WFLAGS += -DRT_BIG_ENDIAN
EXTRA_CFLAGS := $(WFLAGS) -I$(RT28xx_DIR)/include
endif
ifeq ($(PLATFORM),ST)
#WFLAGS += -DST
WFLAGS += -DST
endif
#kernel build options for 2.4
# move to Makefile outside LINUX_SRC := /opt/star/kernel/linux-2.4.27-star
ifeq ($(PLATFORM),RALINK_3052)
CFLAGS := -D__KERNEL__ -I$(LINUX_SRC)/include/asm-mips/mach-generic -I$(LINUX_SRC)/include -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -fomit-frame-pointer -G 0 -mno-abicalls -fno-pic -pipe -finline-limit=100000 -march=mips2 -mabi=32 -Wa,--trap -DLINUX -nostdinc -iwithprefix include $(WFLAGS)
export CFLAGS
endif
ifeq ($(PLATFORM), RALINK_2880)
CFLAGS := -D__KERNEL__ -I$(LINUX_SRC)/include -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -fomit-frame-pointer -G 0 -mno-abicalls -fno-pic -pipe -finline-limit=100000 -march=mips2 -mabi=32 -Wa,--trap -DLINUX -nostdinc -iwithprefix include $(WFLAGS)
export CFLAGS
endif
ifeq ($(PLATFORM),STAR)
CFLAGS := -D__KERNEL__ -I$(LINUX_SRC)/include -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -Uarm -fno-common -pipe -mapcs-32 -D__LINUX_ARM_ARCH__=4 -march=armv4 -mshort-load-bytes -msoft-float -Uarm -DMODULE -DMODVERSIONS -include $(LINUX_SRC)/include/linux/modversions.h $(WFLAGS)
export CFLAGS
endif
ifeq ($(PLATFORM),MSTARTV)
EXTRA_CFLAGS += $(WFLAGS) -I$(RT28xx_DIR)/include
export EXTRA_CFLAGS
endif
ifeq ($(PLATFORM),UBICOM_IPX8)
EXTRA_CFLAGS += $(WFLAGS)
export EXTRA_CFLAGS
endif
ifeq ($(PLATFORM),SIGMA)
CFLAGS := -D__KERNEL__ -I$(LINUX_SRC)/include -I$(LINUX_SRC)/include/asm/gcc -I$(LINUX_SRC)/include/asm-mips/mach-tango2 -I$(LINUX_SRC)/include/asm-mips/mach-tango2 -DEM86XX_CHIP=EM86XX_CHIPID_TANGO2 -DEM86XX_REVISION=6 -I$(LINUX_SRC)/include/asm-mips/mach-generic -I$(RT2860_DIR)/include -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -ffreestanding -O2 -fomit-frame-pointer -G 0 -mno-abicalls -fno-pic -pipe -mabi=32 -march=mips32r2 -Wa,-32 -Wa,-march=mips32r2 -Wa,-mips32r2 -Wa,--trap -DMODULE $(WFLAGS) -DSIGMA863X_PLATFORM
export CFLAGS
endif
ifeq ($(PLATFORM),SIGMA_8622)
CFLAGS := -D__KERNEL__ -I$(CROSS_COMPILE_INCLUDE)/include -I$(LINUX_SRC)/include -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -fno-common -pipe -fno-builtin -D__linux__ -DNO_MM -mapcs-32 -march=armv4 -mtune=arm7tdmi -msoft-float -DMODULE -mshort-load-bytes -nostdinc -iwithprefix -DMODULE $(WFLAGS)
export CFLAGS
endif
ifeq ($(PLATFORM),5VT)
CFLAGS := -D__KERNEL__ -I$(LINUX_SRC)/include -mlittle-endian -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -O3 -fno-omit-frame-pointer -fno-optimize-sibling-calls -fno-omit-frame-pointer -mapcs -mno-sched-prolog -mabi=apcs-gnu -mno-thumb-interwork -D__LINUX_ARM_ARCH__=5 -march=armv5te -mtune=arm926ej-s --param max-inline-insns-single=40000 -Uarm -Wdeclaration-after-statement -Wno-pointer-sign -DMODULE $(WFLAGS)
export CFLAGS
endif
ifeq ($(PLATFORM),IKANOS_V160)
CFLAGS := -D__KERNEL__ -I$(LINUX_SRC)/include -I$(LINUX_SRC)/include/asm/gcc -I$(LINUX_SRC)/include/asm-mips/mach-tango2 -I$(LINUX_SRC)/include/asm-mips/mach-tango2 -I$(LINUX_SRC)/include/asm-mips/mach-generic -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -ffreestanding -O2 -fomit-frame-pointer -G 0 -mno-abicalls -fno-pic -pipe -march=lx4189 -Wa, -DMODULE $(WFLAGS)
export CFLAGS
endif
ifeq ($(PLATFORM),IKANOS_V180)
CFLAGS := -D__KERNEL__ -I$(LINUX_SRC)/include -I$(LINUX_SRC)/include/asm/gcc -I$(LINUX_SRC)/include/asm-mips/mach-tango2 -I$(LINUX_SRC)/include/asm-mips/mach-tango2 -I$(LINUX_SRC)/include/asm-mips/mach-generic -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -ffreestanding -O2 -fomit-frame-pointer -G 0 -mno-abicalls -fno-pic -pipe -mips32r2 -Wa, -DMODULE $(WFLAGS)
export CFLAGS
endif
ifeq ($(PLATFORM),INF_TWINPASS)
CFLAGS := -D__KERNEL__ -DMODULE -I$(LINUX_SRC)/include -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fomit-frame-pointer -fno-strict-aliasing -fno-common -G 0 -mno-abicalls -fno-pic -march=4kc -mips32 -Wa,--trap -pipe -mlong-calls $(WFLAGS)
export CFLAGS
endif
ifeq ($(PLATFORM),INF_DANUBE)
ifneq (,$(findstring 2.4,$(LINUX_SRC)))
CFLAGS := $(WFLAGS) -Wundef -fno-strict-aliasing -fno-common -ffreestanding -Os -fomit-frame-pointer -G 0 -mno-abicalls -fno-pic -pipe -msoft-float -mabi=32 -march=mips32 -Wa,-32 -Wa,-march=mips32 -Wa,-mips32 -Wa,--trap -I$(LINUX_SRC)/include/asm-mips/mach-generic
else
CFLAGS := $(WFLAGS) -Wundef -fno-strict-aliasing -fno-common -ffreestanding -Os -fomit-frame-pointer -G 0 -mno-abicalls -fno-pic -pipe -msoft-float -mabi=32 -march=mips32r2 -Wa,-32 -Wa,-march=mips32r2 -Wa,-mips32r2 -Wa,--trap -I$(LINUX_SRC)/include/asm-mips/mach-generic
endif
export CFLAGS
endif
ifeq ($(PLATFORM),INF_AR9)
CFLAGS := $(WFLAGS) -Wundef -fno-strict-aliasing -fno-common -fno-pic -ffreestanding -Os -fomit-frame-pointer -G 0 -mno-abicalls -fno-pic -pipe -msoft-float -mabi=32 -mlong-calls -march=mips32r2 -mtune=34kc -march=mips32r2 -Wa,-32 -Wa,-march=mips32r2 -Wa,-mips32r2 -Wa,--trap -I$(LINUX_SRC)/include/asm-mips/mach-generic
export CFLAGS
endif
ifeq ($(PLATFORM),INF_VR9)
CFLAGS := $(WFLAGS) -Wundef -fno-strict-aliasing -fno-common -fno-pic -ffreestanding -Os -fomit-frame-pointer -G 0 -mno-abicalls -fno-pic -pipe -msoft-float -mabi=32 -mlong-calls -march=mips32r2 -march=mips32r2 -Wa,-32 -Wa,-march=mips32r2 -Wa,-mips32r2 -Wa,--trap -I$(LINUX_SRC)/include/asm-mips/mach-generic
export CFLAGS
endif
ifeq ($(PLATFORM),BRCM_6358)
CFLAGS := $(WFLAGS) -nostdinc -iwithprefix include -D__KERNEL__ -Wall -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -I $(LINUX_SRC)/include/asm/gcc -G 0 -mno-abicalls -fno-pic -pipe -finline-limit=100000 -mabi=32 -march=mips32 -Wa,-32 -Wa,-march=mips32 -Wa,-mips32 -Wa,--trap -I$(LINUX_SRC)/include/asm-mips/mach-bcm963xx -I$(LINUX_SRC)/include/asm-mips/mach-generic -Os -fomit-frame-pointer -Wdeclaration-after-statement -DMODULE -mlong-calls
export CFLAGS
endif
ifeq ($(PLATFORM),INF_AMAZON_SE)
CFLAGS := -D__KERNEL__ -DMODULE=1 -I$(LINUX_SRC)/include -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -DCONFIG_IFX_ALG_QOS -DCONFIG_WAN_VLAN_SUPPORT -fomit-frame-pointer -DIFX_PPPOE_FRAME -G 0 -fno-pic -mno-abicalls -mlong-calls -pipe -finline-limit=100000 -mabi=32 -march=mips32 -Wa,-32 -Wa,-march=mips32 -Wa,-mips32 -Wa,--trap -nostdinc -iwithprefix include $(WFLAGS)
export CFLAGS
endif
ifeq ($(PLATFORM),ST)
CFLAGS := -D__KERNEL__ -I$(LINUX_SRC)/include -Wall -O2 -Wundef -Wstrict-prototypes -Wno-trigraphs -Wdeclaration-after-statement -Wno-pointer-sign -fno-strict-aliasing -fno-common -fomit-frame-pointer -ffreestanding -m4-nofpu -o $(WFLAGS)
export CFLAGS
endif
ifeq ($(PLATFORM),PC)
ifneq (,$(findstring 2.4,$(LINUX_SRC)))
# Linux 2.4
CFLAGS := -D__KERNEL__ -I$(LINUX_SRC)/include -O2 -fomit-frame-pointer -fno-strict-aliasing -fno-common -pipe -mpreferred-stack-boundary=2 -march=i686 -DMODULE -DMODVERSIONS -include $(LINUX_SRC)/include/linux/modversions.h $(WFLAGS)
export CFLAGS
else
# Linux 2.6
EXTRA_CFLAGS := $(WFLAGS)
endif
endif
ifeq ($(PLATFORM),INTELP6)
EXTRA_CFLAGS := $(WFLAGS)
endif
#If the kernel version of RMI is newer than 2.6.27, please change "CFLAGS" to "EXTRA_FLAGS"
ifeq ($(PLATFORM),RMI)
EXTRA_CFLAGS := -D__KERNEL__ -DMODULE=1 -I$(LINUX_SRC)/include -I$(LINUX_SRC)/include/asm-mips/mach-generic -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -DCONFIG_IFX_ALG_QOS -DCONFIG_WAN_VLAN_SUPPORT -fomit-frame-pointer -DIFX_PPPOE_FRAME -G 0 -fno-pic -mno-abicalls -mlong-calls -pipe -finline-limit=100000 -mabi=32 -G 0 -mno-abicalls -fno-pic -pipe -msoft-float -march=xlr -ffreestanding -march=xlr -Wa,--trap, -nostdinc -iwithprefix include $(WFLAGS)
export EXTRA_CFLAGS
endif
ifeq ($(PLATFORM),RMI_64)
EXTRA_CFLAGS := -D__KERNEL__ -DMODULE=1 -I$(LINUX_SRC)/include -I$(LINUX_SRC)/include/asm-mips/mach-generic -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -DCONFIG_IFX_ALG_QOS -DCONFIG_WAN_VLAN_SUPPORT -fomit-frame-pointer -DIFX_PPPOE_FRAME -G 0 -fno-pic -mno-abicalls -mlong-calls -pipe -finline-limit=100000 -mabi=64 -G 0 -mno-abicalls -fno-pic -pipe -msoft-float -march=xlr -ffreestanding -march=xlr -Wa,--trap, -nostdinc -iwithprefix include $(WFLAGS)
export EXTRA_CFLAGS
endif
ifeq ($(PLATFORM),IXP)
CFLAGS := -v -D__KERNEL__ -DMODULE -I$(LINUX_SRC)/include -mbig-endian -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -Uarm -fno-common -pipe -mapcs-32 -D__LINUX_ARM_ARCH__=5 -mcpu=xscale -mtune=xscale -malignment-traps -msoft-float $(WFLAGS)
EXTRA_CFLAGS := -v $(WFLAGS) -mbig-endian
export CFLAGS
endif
ifeq ($(PLATFORM),SMDK)
EXTRA_CFLAGS := $(WFLAGS)
endif
ifeq ($(PLATFORM),CAVM_OCTEON)
EXTRA_CFLAGS := $(WFLAGS) -mabi=64 $(WFLAGS)
export CFLAGS
endif
ifeq ($(PLATFORM),DM6446)
CFLAGS := -nostdinc -iwithprefix include -D__KERNEL__ -I$(LINUX_SRC)/include -Wall -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -Os -fno-omit-frame-pointer -fno-omit-frame-pointer -mapcs -mno-sched-prolog -mlittle-endian -mabi=apcs-gnu -D__LINUX_ARM_ARCH__=5 -march=armv5te -mtune=arm9tdmi -msoft-float -Uarm -Wdeclaration-after-statement -c -o $(WFLAGS)
export CFLAGS
endif
ifeq ($(PLATFORM),BL2348)
CFLAGS := -D__KERNEL__ -I$(LINUX_SRC)/include -I$(LINUX_SRC)/include/asm/gcc -I$(LINUX_SRC)/include/asm-mips/mach-tango2 -I$(LINUX_SRC)/include/asm-mips/mach-tango2 -DEM86XX_CHIP=EM86XX_CHIPID_TANGO2 -DEM86XX_REVISION=6 -I$(LINUX_SRC)/include/asm-mips/mach-generic -I$(RT2860_DIR)/include -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -ffreestanding -O2 -fomit-frame-pointer -G 0 -mno-abicalls -fno-pic -pipe -mabi=32 -march=mips32r2 -Wa,-32 -Wa,-march=mips32r2 -Wa,-mips32r2 -Wa,--trap -DMODULE $(WFLAGS) -DSIGMA863X_PLATFORM -DEXPORT_SYMTAB -DPLATFORM_BL2348
export CFLAGS
endif
ifeq ($(PLATFORM),BL23570)
EXTRA_CFLAGS := -D__KERNEL__ -I$(LINUX_SRC)/include -I$(LINUX_SRC)/include/asm/gcc -I$(LINUX_SRC)/include/asm-mips/mach-tango2 -I$(LINUX_SRC)/include/asm-mips/mach-tango2 -DEM86XX_CHIP=EM86XX_CHIPID_TANGO2 -DEM86XX_REVISION=6 -I$(LINUX_SRC)/include/asm-mips/mach-generic -I$(RT2860_DIR)/include -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -ffreestanding -O2 -fomit-frame-pointer -G 0 -mno-abicalls -fno-pic -pipe -mabi=32 -march=74kc -Wa,-32 -Wa,-march=mips32r2 -Wa,-mips32r2 -Wa,--trap -DMODULE $(WFLAGS) -DSIGMA863X_PLATFORM -DEXPORT_SYMTAB -DPLATFORM_BL23570
export EXTRA_CFLAGS
endif
ifeq ($(PLATFORM),BLUBB)
CFLAGS := -D__KERNEL__ -I$(LINUX_SRC)/include -I$(LINUX_SRC)/include/asm/gcc -I$(LINUX_SRC)/include/asm-mips/mach-tango2 -I$(LINUX_SRC)/include/asm-mips/mach-tango2 -DEM86XX_CHIP=EM86XX_CHIPID_TANGO2 -DEM86XX_REVISION=6 -I$(LINUX_SRC)/include/asm-mips/mach-generic -I$(RT2860_DIR)/include -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -ffreestanding -O2 -fomit-frame-pointer -G 0 -mno-abicalls -fno-pic -pipe -mabi=32 -march=mips32r2 -Wa,-32 -Wa,-march=mips32r2 -Wa,-mips32r2 -Wa,--trap -DMODULE $(WFLAGS) -DSIGMA863X_PLATFORM -DEXPORT_SYMTAB -DPLATFORM_BL2348
export CFLAGS
endif
ifeq ($(PLATFORM),BLPMP)
CFLAGS := -D__KERNEL__ -I$(LINUX_SRC)/include -I$(LINUX_SRC)/include/asm/gcc -I$(LINUX_SRC)/include/asm-mips/mach-tango2 -I$(LINUX_SRC)/include/asm-mips/mach-tango2 -DEM86XX_CHIP=EM86XX_CHIPID_TANGO2 -DEM86XX_REVISION=6 -I$(LINUX_SRC)/include/asm-mips/mach-generic -I$(RT2860_DIR)/include -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -ffreestanding -O2 -fomit-frame-pointer -G 0 -mno-abicalls -fno-pic -pipe -mabi=32 -march=mips32r2 -Wa,-32 -Wa,-march=mips32r2 -Wa,-mips32r2 -Wa,--trap -DMODULE $(WFLAGS) -DSIGMA863X_PLATFORM -DEXPORT_SYMTAB
export CFLAGS
endif
ifeq ($(PLATFORM),MT85XX)
ifneq (,$(findstring 2.4,$(LINUX_SRC)))
# Linux 2.4
CFLAGS := -D__KERNEL__ -I$(LINUX_SRC)/include -O2 -fomit-frame-pointer -fno-strict-aliasing -fno-common -pipe -mpreferred-stack-boundary=2 -march=i686 -DMODULE -DMODVERSIONS -include $(LINUX_SRC)/include/linux/modversions.h $(WFLAGS)
export CFLAGS
else
# Linux 2.6
EXTRA_CFLAGS += $(WFLAGS) -DMT85XX
EXTRA_CFLAGS += -D _NO_TYPEDEF_BOOL_ \
-D _NO_TYPEDEF_UCHAR_ \
-D _NO_TYPEDEF_UINT8_ \
-D _NO_TYPEDEF_UINT16_ \
-D _NO_TYPEDEF_UINT32_ \
-D _NO_TYPEDEF_UINT64_ \
-D _NO_TYPEDEF_CHAR_ \
-D _NO_TYPEDEF_INT16_ \
-D _NO_TYPEDEF_INT32_ \
-D _NO_TYPEDEF_INT64_ \
endif
endif
ifeq ($(PLATFORM),MT53XX)
ifneq (,$(findstring 2.4,$(LINUX_SRC)))
# Linux 2.4
CFLAGS := -D__KERNEL__ -I$(LINUX_SRC)/include -O2 -fomit-frame-pointer -fno-strict-aliasing -fno-common -pipe -mpreferred-stack-boundary=2 -march=i686 -DMODULE -DMODVERSIONS -include $(LINUX_SRC)/include/linux/modversions.h $(WFLAGS)
export CFLAGS
else
# Linux 2.6 and newer
EXTRA_CFLAGS += $(WFLAGS)
endif
endif
ifeq ($(PLATFORM),NXP_TV550)
ifneq (,$(findstring 2.4,$(LINUX_SRC)))
# Linux 2.4
CFLAGS := -D__KERNEL__ -I$(LINUX_SRC)/include -O2 -fomit-frame-pointer -fno-strict-aliasing -fno-common -pipe -mpreferred-stack-boundary=2 -march=mips -DMODULE -DMODVERSIONS -include $(LINUX_SRC)/include/linux/modversions.h $(WFLAGS)
export CFLAGS
else
# Linux 2.6
EXTRA_CFLAGS := $(WFLAGS)
endif
endif
ifeq ($(PLATFORM),MVL5)
CFLAGS := -D__KERNEL__ -I$(LINUX_SRC)/include -mlittle-endian -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -O3 -fno-omit-frame-pointer -fno-optimize-sibling-calls -fno-omit-frame-pointer -mapcs -mno-sched-prolog -mno-thumb-interwork -D__LINUX_ARM_ARCH__=5 -march=armv5te -mtune=arm926ej-s --param max-inline-insns-single=40000 -Uarm -Wdeclaration-after-statement -Wno-pointer-sign -DMODULE $(WFLAGS)
export CFLAGS
endif
ifeq ($(PLATFORM),RALINK_3352)
CFLAGS := -D__KERNEL__ -I$(LINUX_SRC)/include/asm-mips/mach-generic -I$(LINUX_SRC)/include -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -fomit-frame-pointer -G 0 -mno-abicalls -fno-pic -pipe -finline-limit=100000 -march=mips2 -mabi=32 -Wa,--trap -DLINUX -nostdinc -iwithprefix include $(WFLAGS)
export CFLAGS
endif
Voilà, désolé si c'est un peu lourd.
Merci d'avance de votre aide. 🙂
PS : j'ai peut-être fait une bêtise en mettant les deux HAS_NATIVE_WPA_SUPPLICANT_SUPPORT du fichier config.mk sur oui.
