xubuntu@xubuntu:~$ sudo smartctl -s on -d ata -a /dev/sdd
smartctl 6.5 2016-01-24 r4214 [i686-linux-4.13.0-36-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
Read Device Identity failed: Invalid argument
A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.
xubuntu@xubuntu:~$ sudo smartctl -s on -d sat -a /dev/sdd
smartctl 6.5 2016-01-24 r4214 [i686-linux-4.13.0-36-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: ST1000LM035-1RK172
Serial Number: WC00L2Q0
LU WWN Device Id: 5 000c50 0a89e6510
Firmware Version: SBM3
User Capacity: 1 000 204 886 016 bytes [1,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-3 T13/2161-D revision 3b
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Fri Apr 13 13:20:28 2018 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x71) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 170) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x3035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 067 064 006 Pre-fail Always - 4665768
3 Spin_Up_Time 0x0003 098 098 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 11
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 100 253 045 Pre-fail Always - 22377
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 14 (186 105 0)
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 10
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 072 070 040 Old_age Always - 28 (Min/Max 21/29)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 1
193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 325
194 Temperature_Celsius 0x0022 028 040 000 Old_age Always - 28 (0 20 0 0 0)
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 1 (66 170 0)
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 2142987
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 2522781
254 Free_Fall_Sensor 0x0032 100 100 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Ici j'ai oublié de remplacer le X. Je vous l'ai mis en copie quand même je ne savais pas si ça pouvais fausser toute la manip.
xubuntu@xubuntu:~$ sudo smartctl -s on -d scsi -a /dev/sdX
smartctl 6.5 2016-01-24 r4214 [i686-linux-4.13.0-36-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
Smartctl open device: /dev/sdX failed: No such device
J'ai donc réécris avec le d après
xubuntu@xubuntu:~$ sudo smartctl -s on -d scsi -a /dev/sdd
smartctl 6.5 2016-01-24 r4214 [i686-linux-4.13.0-36-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Vendor: Seagate
Product: Ultra Slim GD
Revision: 0108
Compliance: SPC-4
User Capacity: 1 000 204 885 504 bytes [1,00 TB]
Logical block size: 512 bytes
LB provisioning type: unreported, LBPME=-1, LBPRZ=0
Logical Unit id: 0x3e41375643434358
Serial number: NA7VCCCX
Device type: disk
Local Time is: Fri Apr 13 13:20:57 2018 UTC
SMART support is: Unavailable - device lacks SMART capability.
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
unable to fetch IEC (SMART) mode page [unsupported field in scsi command]
A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.
xubuntu@xubuntu:~$ sudo smartctl -s on -d auto -T verypermissive -a /dev/sdd
smartctl 6.5 2016-01-24 r4214 [i686-linux-4.13.0-36-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
/dev/sdd: Unknown USB bridge [0x0bc2:0xab2e (0x108)]
Please specify device type with the -d option.
Use smartctl -h to get a usage summary
xubuntu@xubuntu:~$ sudo smartctl -s on -d test -T verypermissive -a /dev/sdd
smartctl 6.5 2016-01-24 r4214 [i686-linux-4.13.0-36-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
/dev/sdd: Unknown USB bridge [0x0bc2:0xab2e (0x108)]
Please specify device type with the -d option.
Use smartctl -h to get a usage summary
