Après une session de Natty, interrompue normalement, mon PC n'arrive pas à démarrer : les ventilos tournent mais j'entends une sorte de petit clac comme s'il y avait une anomalie qui le ramenait à zéro toutes les deux secondes environ. Si je coupe une seconde ou deux l'alimentation grâce au petit interrupteur à l'arrière de l'alim de mon PC, après cela le PC veut bien démarrer normalement. Ce qui me fait penser très fortement que Natty fout la merde sur ma carte-mère. Cela se produit sur mon PC Acer M5100 (dans ma signature), aussi bien après une session de Natty installé sur disque dur et mis à jour qu'après une session live-CD natty 64 bits ou 32 bits version desktop, alpha3 ou daily du jour.
Dans le dmesg ci-dessous, j'ai déconnecté tous mes disques durs internes pour ne laisser que le lecteur optique afin de pouvoir démarrer le PC sur le live-CD natty desktop 32 bits alpha3,
j'ai même viré ma carte graphique pour utiliser la partie graphique intégrée à ma carte-mère. Le but étant de mettre en évidence que c'est bien un problème entre la carte-mère et Natty et pas un pb de périphérique :
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.38-5-generic (buildd@vernadsky) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-3ubuntu3) ) #32-Ubuntu SMP Tue Feb 22 16:09:46 UTC 2011 (Ubuntu 2.6.38-5.32-generic 2.6.38-rc6)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cffe0000 (usable)
[ 0.000000] BIOS-e820: 00000000cffe0000 - 00000000cffe3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cffe3000 - 00000000cfff0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cfff0000 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] DMI 2.5 present.
[ 0.000000] DMI: Acer Aspire M5100/F690GVM , BIOS R02-A3S1 12/04/2007
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0xcffe0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 base 000100000000 mask FFFFE0000000 write-back
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000120000000 aka 4608M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] found SMP MP-table at [c00f3b20] f3b20
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] initial memory mapped : 0 - 01c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
[ 0.000000] RAMDISK: 7f328000 - 80000000
[ 0.000000] Allocated new RAMDISK: 36b26000 - 377fda5c
[ 0.000000] Move RAMDISK from 000000007f328000 - 000000007ffffa5b to 36b26000 - 377fda5b
[ 0.000000] ACPI: RSDP 000f8140 00024 (v02 ACRSYS)
[ 0.000000] ACPI: RSDT cffe3000 0003C (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP cffe3080 00074 (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT cffe3100 04CA7 (v01 ACRSYS ACRPRDCT 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS cffe0000 00040
[ 0.000000] ACPI: SSDT cffe7e80 00544 (v01 PTLTD POWERNOW 00000001 LTP 00000001)
[ 0.000000] ACPI: HPET cffe8400 00038 (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000098)
[ 0.000000] ACPI: SLIC cffe8440 00176 (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000020)
[ 0.000000] ACPI: MCFG cffe85c0 0003C (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000000)
[ 0.000000] ACPI: APIC cffe7dc0 00084 (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 2439MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x000cffe0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000cffe0
[ 0.000000] On node 0 totalpages: 851823
[ 0.000000] free_area_init_node: node 0, pgdat c1782200, node_mem_map f5125200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 4880 pages used for memmap
[ 0.000000] HighMem zone: 619730 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:10000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 13 pages/cpu @f4c00000 s28800 r0 d24448 u1048576
[ 0.000000] pcpu-alloc: s28800 r0 d24448 u1048576 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 845167
[ 0.000000] Kernel command line: file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz debian-installer/language=fr console-setup/layoutcode?=fr console-setup/variantcode?=oss
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 17038400 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:000cffe0)
[ 0.000000] Memory: 3340444k/3407744k available (5187k kernel code, 66848k reserved, 2534k data, 700k init, 2498440k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc178b000 - 0xc183a000 ( 700 kB)
[ 0.000000] .data : 0xc1510db1 - 0xc178a5c0 (2534 kB)
[ 0.000000] .text : 0xc1000000 - 0xc1510db1 (5187 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:712 16
[ 0.000000] CPU 0 irqstacks, hard=f3408000 soft=f340a000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2194.306 MHz processor.
[ 0.008004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4388.61 BogoMIPS (lpj=8777224)
[ 0.008084] pid_max: default: 32768 minimum: 301
[ 0.008150] Security Framework initialized
[ 0.008207] AppArmor: AppArmor initialized
[ 0.008245] Yama: becoming mindful.
[ 0.008351] Mount-cache hash table entries: 512
[ 0.008528] /proc/device-tree: can't find root
[ 0.008573] Initializing cgroup subsys ns
[ 0.008613] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.008659] Initializing cgroup subsys cpuacct
[ 0.008701] Initializing cgroup subsys memory
[ 0.008747] Initializing cgroup subsys devices
[ 0.008786] Initializing cgroup subsys freezer
[ 0.008825] Initializing cgroup subsys net_cls
[ 0.008863] Initializing cgroup subsys blkio
[ 0.008934] CPU: Physical Processor ID: 0
[ 0.008973] CPU: Processor Core ID: 0
[ 0.009012] mce: CPU supports 6 MCE banks
[ 0.009059] using C1E aware idle routine
[ 0.014494] ACPI: Core revision 20110112
[ 0.020035] ftrace: allocating 23635 entries in 47 pages
[ 0.024071] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.024636] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.065749] CPU0: AMD Phenom(tm) 9500 Quad-Core Processor stepping 02
[ 0.068003] Performance Events: AMD PMU driver.
[ 0.068003] ... version: 0
[ 0.068003] ... bit width: 48
[ 0.068003] ... generic registers: 4
[ 0.068003] ... value mask: 0000ffffffffffff
[ 0.068003] ... max period: 00007fffffffffff
[ 0.068003] ... fixed-purpose events: 0
[ 0.068003] ... event mask: 000000000000000f
[ 0.068003] CPU 1 irqstacks, hard=f34b2000 soft=f34b4000
[ 0.068003] Booting Node 0, Processors #1
[ 0.012000] Initializing CPU#1
[ 0.156077] CPU 2 irqstacks, hard=f34dc000 soft=f34de000
[ 0.156148] #2
[ 0.012000] Initializing CPU#2
[ 0.248075] CPU 3 irqstacks, hard=f34e8000 soft=f34ea000
[ 0.248146] #3 Ok.
[ 0.012000] Initializing CPU#3
[ 0.340027] Brought up 4 CPUs
[ 0.340099] Total of 4 processors activated (17555.85 BogoMIPS).
[ 0.341292] devtmpfs: initialized
[ 0.341340] print_constraints: dummy:
[ 0.341403] Time: 9:38:54 Date: 03/18/11
[ 0.341475] NET: Registered protocol family 16
[ 0.341604] EISA bus registered
[ 0.341643] node 0 link 0: io port [c000, ffff]
[ 0.341647] TOM: 00000000e0000000 aka 3584M
[ 0.341521] Trying to unpack rootfs image as initramfs...
[ 0.341720] node 0 link 0: mmio [a0000, bffff]
[ 0.341724] node 0 link 0: mmio [fc000000, fe02ffff]
[ 0.341727] node 0 link 0: mmio [e0000000, dfffffff]
[ 0.341729] node 0 link 0: mmio [f8000000, fbffffff]
[ 0.341732] node 0 link 0: mmio [f0000000, f7ffffff]
[ 0.341735] node 0 link 0: mmio [e0000000, e03fffff]
[ 0.341738] TOM2: 0000000120000000 aka 4608M
[ 0.341775] bus: [00, 03] on node 0 link 0
[ 0.341778] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.341781] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[ 0.341784] bus: 00 index 2 [mem 0xe0400000-0xffffffff]
[ 0.341786] bus: 00 index 3 [mem 0xe0000000-0xe03fffff]
[ 0.341797] Extended Config Space enabled on 1 nodes
[ 0.341845] ACPI: bus type pci registered
[ 0.341950] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.341994] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.342032] PCI: Using MMCONFIG for extended config space
[ 0.342070] PCI: Using configuration type 1 for base access
[ 0.344496] bio: create slab <bio-0> at 0
[ 0.344811] ACPI: EC: Look up EC in DSDT
[ 0.345717] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.350803] ACPI: Interpreter enabled
[ 0.350848] ACPI: (supports S0 S3 S4 S5)
[ 0.351025] ACPI: Using IOAPIC for interrupt routing
[ 2.619492] ACPI: No dock devices found.
[ 2.619530] HEST: Table not found.
[ 2.619569] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 2.619672] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 2.619832] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 2.619835] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 2.619838] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 2.619841] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
[ 2.619844] pci_root PNP0A03:00: host bridge window [mem 0xe0000000-0xfebfffff] (ignored)
[ 2.619854] pci 0000:00:00.0: [1002:7910] type 0 class 0x000600
[ 2.619884] pci 0000:00:01.0: [1002:7912] type 1 class 0x000604
[ 2.619922] pci 0000:00:07.0: [1002:7917] type 1 class 0x000604
[ 2.619949] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 2.619952] pci 0000:00:07.0: PME# disabled
[ 2.619985] pci 0000:00:12.0: [1002:4380] type 0 class 0x000101
[ 2.620004] pci 0000:00:12.0: reg 10: [io 0xff00-0xff07]
[ 2.620015] pci 0000:00:12.0: reg 14: [io 0xfe00-0xfe03]
[ 2.620026] pci 0000:00:12.0: reg 18: [io 0xfd00-0xfd07]
[ 2.620037] pci 0000:00:12.0: reg 1c: [io 0xfc00-0xfc03]
[ 2.620047] pci 0000:00:12.0: reg 20: [io 0xfb00-0xfb0f]
[ 2.620059] pci 0000:00:12.0: reg 24: [mem 0xfe02f000-0xfe02f3ff]
[ 2.620082] pci 0000:00:12.0: set SATA to AHCI mode
[ 2.620148] pci 0000:00:13.0: [1002:4387] type 0 class 0x000c03
[ 2.620172] pci 0000:00:13.0: reg 10: [mem 0xfe02e000-0xfe02efff]
[ 2.620242] pci 0000:00:13.1: [1002:4388] type 0 class 0x000c03
[ 2.620258] pci 0000:00:13.1: reg 10: [mem 0xfe02d000-0xfe02dfff]
[ 2.620327] pci 0000:00:13.2: [1002:4389] type 0 class 0x000c03
[ 2.620342] pci 0000:00:13.2: reg 10: [mem 0xfe02c000-0xfe02cfff]
[ 2.620410] pci 0000:00:13.3: [1002:438a] type 0 class 0x000c03
[ 2.620425] pci 0000:00:13.3: reg 10: [mem 0xfe02b000-0xfe02bfff]
[ 2.620494] pci 0000:00:13.4: [1002:438b] type 0 class 0x000c03
[ 2.620509] pci 0000:00:13.4: reg 10: [mem 0xfe02a000-0xfe02afff]
[ 2.620584] pci 0000:00:13.5: [1002:4386] type 0 class 0x000c03
[ 2.620605] pci 0000:00:13.5: reg 10: [mem 0xfe029000-0xfe0290ff]
[ 2.620682] pci 0000:00:13.5: supports D1 D2
[ 2.620684] pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot
[ 2.620689] pci 0000:00:13.5: PME# disabled
[ 2.620712] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[ 2.620736] pci 0000:00:14.0: reg 10: [io 0x0b00-0x0b0f]
[ 2.620818] pci 0000:00:14.1: [1002:438c] type 0 class 0x000101
[ 2.620833] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
[ 2.620844] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
[ 2.620854] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
[ 2.620865] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
[ 2.620876] pci 0000:00:14.1: reg 20: [io 0xf900-0xf90f]
[ 2.620916] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[ 2.620940] pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit]
[ 2.621003] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 2.621008] pci 0000:00:14.2: PME# disabled
[ 2.621025] pci 0000:00:14.3: [1002:438d] type 0 class 0x000601
[ 2.621104] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[ 2.621153] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
[ 2.621172] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
[ 2.621189] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
[ 2.621206] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
[ 2.621225] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
[ 2.621250] PCI: peer root bus 00 res updated from pci conf
[ 2.621276] pci 0000:01:05.0: [1002:791e] type 0 class 0x000300
[ 2.621287] pci 0000:01:05.0: reg 10: [mem 0xf8000000-0xfbffffff 64bit pref]
[ 2.621295] pci 0000:01:05.0: reg 18: [mem 0xfdee0000-0xfdeeffff 64bit]
[ 2.621301] pci 0000:01:05.0: reg 20: [io 0xde00-0xdeff]
[ 2.621306] pci 0000:01:05.0: reg 24: [mem 0xfdd00000-0xfddfffff]
[ 2.621319] pci 0000:01:05.0: supports D1 D2
[ 2.621330] pci 0000:01:05.2: [1002:7919] type 0 class 0x000403
[ 2.621340] pci 0000:01:05.2: reg 10: [mem 0xfdefc000-0xfdefffff 64bit]
[ 2.621380] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 2.621420] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 2.621424] pci 0000:00:01.0: bridge window [mem 0xfdd00000-0xfdefffff]
[ 2.621428] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xfbffffff 64bit pref]
[ 2.621469] pci 0000:02:00.0: [11ab:4364] type 0 class 0x000200
[ 2.621488] pci 0000:02:00.0: reg 10: [mem 0xfdcfc000-0xfdcfffff 64bit]
[ 2.621499] pci 0000:02:00.0: reg 18: [io 0xee00-0xeeff]
[ 2.621533] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 2.621564] pci 0000:02:00.0: supports D1 D2
[ 2.621566] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 2.621571] pci 0000:02:00.0: PME# disabled
[ 2.628177] pci 0000:00:07.0: PCI bridge to [bus 02-02]
[ 2.628217] pci 0000:00:07.0: bridge window [io 0xe000-0xefff]
[ 2.628220] pci 0000:00:07.0: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 2.628225] pci 0000:00:07.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 2.628263] pci 0000:03:06.0: [104c:8024] type 0 class 0x000c00
[ 2.628288] pci 0000:03:06.0: reg 10: [mem 0xfdbff000-0xfdbff7ff]
[ 2.628302] pci 0000:03:06.0: reg 14: [mem 0xfdbf8000-0xfdbfbfff]
[ 2.628388] pci 0000:03:06.0: supports D1 D2
[ 2.628390] pci 0000:03:06.0: PME# supported from D0 D1 D2 D3hot
[ 2.628397] pci 0000:03:06.0: PME# disabled
[ 2.628446] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode)
[ 2.628488] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
[ 2.628493] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff]
[ 2.628499] pci 0000:00:14.4: bridge window [mem 0xfda00000-0xfdafffff pref]
[ 2.628502] pci 0000:00:14.4: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 2.628505] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 2.628508] pci 0000:00:14.4: bridge window [mem 0xe0400000-0xffffffff] (subtractive decode)
[ 2.628511] pci 0000:00:14.4: bridge window [mem 0xe0000000-0xe03fffff] (subtractive decode)
[ 2.628524] pci_bus 0000:00: on NUMA node 0
[ 2.628528] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 2.628719] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 2.628795] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT]
[ 2.628828] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 2.628866] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 2.645324] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 2.645737] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 2.646151] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 2.646561] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 2.646971] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 2.647381] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 2.647790] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 2.648232] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 2.648719] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[ 2.648762] vgaarb: loaded
[ 2.648995] SCSI subsystem initialized
[ 2.649047] libata version 3.00 loaded.
[ 2.649047] usbcore: registered new interface driver usbfs
[ 2.649047] usbcore: registered new interface driver hub
[ 2.649047] usbcore: registered new device driver usb
[ 2.649047] wmi: Mapper loaded
[ 2.649047] PCI: Using ACPI for IRQ routing
[ 2.649047] PCI: pci_cache_line_size set to 64 bytes
[ 2.649047] Expanded resource reserved due to conflict with PCI Bus #00
[ 2.649047] reserve RAM buffer: 000000000009f400 - 000000000009ffff
[ 2.649047] reserve RAM buffer: 00000000cffe0000 - 00000000cfffffff
[ 2.649047] NetLabel: Initializing
[ 2.649047] NetLabel: domain hash size = 128
[ 2.649047] NetLabel: protocols = UNLABELED CIPSOv4
[ 2.649047] NetLabel: unlabeled traffic allowed by default
[ 2.649047] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 2.649047] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 2.652190] Switching to clocksource hpet
[ 3.178340] Switched to NOHz mode on CPU #0
[ 3.178281] Switched to NOHz mode on CPU #3
[ 3.178271] Switched to NOHz mode on CPU #2
[ 3.178281] Switched to NOHz mode on CPU #1
[ 3.183529] AppArmor: AppArmor Filesystem Enabled
[ 3.183611] pnp: PnP ACPI init
[ 3.183672] ACPI: bus type pnp registered
[ 3.183838] pnp 00:00: [bus 00-ff]
[ 3.183842] pnp 00:00: [io 0x0cf8-0x0cff]
[ 3.183845] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 3.183847] pnp 00:00: [io 0x0d00-0xffff window]
[ 3.183850] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 3.183852] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[ 3.183855] pnp 00:00: [mem 0xe0000000-0xfebfffff window]
[ 3.183938] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 3.184095] pnp 00:01: [io 0x4100-0x411f]
[ 3.184098] pnp 00:01: [io 0x0228-0x022f]
[ 3.184100] pnp 00:01: [io 0x040b]
[ 3.184102] pnp 00:01: [io 0x04d6]
[ 3.184104] pnp 00:01: [io 0x0c00-0x0c01]
[ 3.184107] pnp 00:01: [io 0x0c14]
[ 3.184109] pnp 00:01: [io 0x0c50-0x0c52]
[ 3.184111] pnp 00:01: [io 0x0c6c-0x0c6d]
[ 3.184113] pnp 00:01: [io 0x0c6f]
[ 3.184115] pnp 00:01: [io 0x0cd0-0x0cd1]
[ 3.184118] pnp 00:01: [io 0x0cd2-0x0cd3]
[ 3.184120] pnp 00:01: [io 0x0cd4-0x0cdf]
[ 3.184122] pnp 00:01: [io 0x4000-0x40fe]
[ 3.184124] pnp 00:01: [io 0x4210-0x4217]
[ 3.184126] pnp 00:01: [io 0x0b00-0x0b0f]
[ 3.184129] pnp 00:01: [io 0x0b10-0x0b1f]
[ 3.184131] pnp 00:01: [mem 0x00000000-0x00000fff window]
[ 3.184134] pnp 00:01: [mem 0xfee00400-0xfee00fff window]
[ 3.184188] pnp 00:01: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:02:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[ 3.184272] system 00:01: [io 0x4100-0x411f] has been reserved
[ 3.184311] system 00:01: [io 0x0228-0x022f] has been reserved
[ 3.184349] system 00:01: [io 0x040b] has been reserved
[ 3.184387] system 00:01: [io 0x04d6] has been reserved
[ 3.184425] system 00:01: [io 0x0c00-0x0c01] has been reserved
[ 3.184463] system 00:01: [io 0x0c14] has been reserved
[ 3.184501] system 00:01: [io 0x0c50-0x0c52] has been reserved
[ 3.184543] system 00:01: [io 0x0c6c-0x0c6d] has been reserved
[ 3.184581] system 00:01: [io 0x0c6f] has been reserved
[ 3.184618] system 00:01: [io 0x0cd0-0x0cd1] has been reserved
[ 3.184657] system 00:01: [io 0x0cd2-0x0cd3] has been reserved
[ 3.184695] system 00:01: [io 0x0cd4-0x0cdf] has been reserved
[ 3.184733] system 00:01: [io 0x4000-0x40fe] has been reserved
[ 3.184771] system 00:01: [io 0x4210-0x4217] has been reserved
[ 3.184810] system 00:01: [io 0x0b00-0x0b0f] has been reserved
[ 3.184848] system 00:01: [io 0x0b10-0x0b1f] has been reserved
[ 3.184888] system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved
[ 3.184932] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 3.185028] pnp 00:02: [dma 4]
[ 3.185030] pnp 00:02: [io 0x0000-0x000f]
[ 3.185032] pnp 00:02: [io 0x0080-0x0090]
[ 3.185035] pnp 00:02: [io 0x0094-0x009f]
[ 3.185040] pnp 00:02: [io 0x00c0-0x00df]
[ 3.185073] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 3.185117] pnp 00:03: [irq 0 disabled]
[ 3.185136] pnp 00:03: [irq 8]
[ 3.185139] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 3.185169] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 3.185193] pnp 00:04: [io 0x0070-0x0073]
[ 3.185223] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 3.185232] pnp 00:05: [io 0x0061]
[ 3.185262] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 3.185271] pnp 00:06: [io 0x00f0-0x00ff]
[ 3.185279] pnp 00:06: [irq 13]
[ 3.185314] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 3.185345] pnp 00:07: [io 0x0010-0x001f]
[ 3.185347] pnp 00:07: [io 0x0022-0x003f]
[ 3.185349] pnp 00:07: [io 0x0062-0x0063]
[ 3.185351] pnp 00:07: [io 0x0065-0x006f]
[ 3.185353] pnp 00:07: [io 0x0074-0x007f]
[ 3.185355] pnp 00:07: [io 0x0091-0x0093]
[ 3.185357] pnp 00:07: [io 0x00a2-0x00bf]
[ 3.185359] pnp 00:07: [io 0x00e0-0x00ef]
[ 3.185361] pnp 00:07: [io 0x04d0-0x04d1]
[ 3.185363] pnp 00:07: [io 0x0200-0x0205]
[ 3.185365] pnp 00:07: [io 0x0290-0x0297]
[ 3.185427] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 3.185468] system 00:07: [io 0x0200-0x0205] has been reserved
[ 3.185509] system 00:07: [io 0x0290-0x0297] has been reserved
[ 3.185549] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 3.185721] pnp 00:08: [io 0x03f0-0x03f5]
[ 3.185723] pnp 00:08: [io 0x03f7]
[ 3.185732] pnp 00:08: [irq 6]
[ 3.185734] pnp 00:08: [dma 2]
[ 3.185783] pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (active)
[ 3.185970] pnp 00:09: [io 0x03f8-0x03ff]
[ 3.185979] pnp 00:09: [irq 4]
[ 3.186037] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[ 3.186233] pnp 00:0a: [io 0x02f8-0x02ff]
[ 3.186242] pnp 00:0a: [irq 3]
[ 3.186300] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
[ 3.186561] pnp 00:0b: [io 0x0378-0x037f]
[ 3.186570] pnp 00:0b: [irq 7]
[ 3.186626] pnp 00:0b: Plug and Play ACPI device, IDs PNP0400 (active)
[ 3.186727] pnp 00:0c: [irq 12]
[ 3.186766] pnp 00:0c: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 3.186793] pnp 00:0d: [io 0x0060]
[ 3.186795] pnp 00:0d: [io 0x0064]
[ 3.186803] pnp 00:0d: [irq 1]
[ 3.186843] pnp 00:0d: Plug and Play ACPI device, IDs PNP0303 (active)
[ 3.186869] pnp 00:0e: [mem 0xe0000000-0xefffffff]
[ 3.186926] system 00:0e: [mem 0xe0000000-0xefffffff] could not be reserved
[ 3.186969] system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 3.187043] pnp 00:0f: [mem 0x000f0000-0x000fffff]
[ 3.187046] pnp 00:0f: [mem 0xfed00000-0xfed000ff]
[ 3.187048] pnp 00:0f: [mem 0xcffe0000-0xcfffffff]
[ 3.187050] pnp 00:0f: [mem 0xffff0000-0xffffffff]
[ 3.187056] pnp 00:0f: [mem 0x00000000-0x0009ffff]
[ 3.187059] pnp 00:0f: [mem 0x00100000-0xcffdffff]
[ 3.187061] pnp 00:0f: [mem 0xd0000000-0xdfffffff]
[ 3.187063] pnp 00:0f: [mem 0xfec00000-0xfec00fff]
[ 3.187065] pnp 00:0f: [mem 0xfee00000-0xfee00fff]
[ 3.187068] pnp 00:0f: [mem 0xfff80000-0xfffeffff]
[ 3.187134] system 00:0f: [mem 0x000f0000-0x000fffff] could not be reserved
[ 3.187177] system 00:0f: [mem 0xfed00000-0xfed000ff] has been reserved
[ 3.187217] system 00:0f: [mem 0xcffe0000-0xcfffffff] could not be reserved
[ 3.187258] system 00:0f: [mem 0xffff0000-0xffffffff] has been reserved
[ 3.187298] system 00:0f: [mem 0x00000000-0x0009ffff] could not be reserved
[ 3.187340] system 00:0f: [mem 0x00100000-0xcffdffff] could not be reserved
[ 3.187381] system 00:0f: [mem 0xd0000000-0xdfffffff] has been reserved
[ 3.187421] system 00:0f: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 3.187461] system 00:0f: [mem 0xfee00000-0xfee00fff] could not be reserved
[ 3.187502] system 00:0f: [mem 0xfff80000-0xfffeffff] has been reserved
[ 3.187543] system 00:0f: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 3.187552] pnp: PnP ACPI: found 16 devices
[ 3.187590] ACPI: ACPI bus type pnp unregistered
[ 3.187630] PnPBIOS: Disabled by ACPI PNP
[ 3.190876] Freeing initrd memory: 13152k freed
[ 3.224074] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 3.224115] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 3.224155] pci 0000:00:01.0: bridge window [mem 0xfdd00000-0xfdefffff]
[ 3.224195] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xfbffffff 64bit pref]
[ 3.224242] pci 0000:02:00.0: BAR 6: assigned [mem 0xfdf00000-0xfdf1ffff pref]
[ 3.224285] pci 0000:00:07.0: PCI bridge to [bus 02-02]
[ 3.224323] pci 0000:00:07.0: bridge window [io 0xe000-0xefff]
[ 3.224363] pci 0000:00:07.0: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 3.224404] pci 0000:00:07.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 3.224448] pci 0000:00:14.4: PCI bridge to [bus 03-03]
[ 3.224487] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
[ 3.224528] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff]
[ 3.224570] pci 0000:00:14.4: bridge window [mem 0xfda00000-0xfdafffff pref]
[ 3.224625] pci 0000:00:07.0: setting latency timer to 64
[ 3.224633] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 3.224636] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
[ 3.224639] pci_bus 0000:00: resource 6 [mem 0xe0400000-0xffffffff]
[ 3.224646] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xe03fffff]
[ 3.224650] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 3.224652] pci_bus 0000:01: resource 1 [mem 0xfdd00000-0xfdefffff]
[ 3.224655] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff 64bit pref]
[ 3.224659] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 3.224661] pci_bus 0000:02: resource 1 [mem 0xfdc00000-0xfdcfffff]
[ 3.224664] pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 3.224668] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
[ 3.224670] pci_bus 0000:03: resource 1 [mem 0xfdb00000-0xfdbfffff]
[ 3.224673] pci_bus 0000:03: resource 2 [mem 0xfda00000-0xfdafffff pref]
[ 3.224676] pci_bus 0000:03: resource 4 [io 0x0000-0xffff]
[ 3.224679] pci_bus 0000:03: resource 5 [mem 0x000a0000-0x000bffff]
[ 3.224682] pci_bus 0000:03: resource 6 [mem 0xe0400000-0xffffffff]
[ 3.224685] pci_bus 0000:03: resource 7 [mem 0xe0000000-0xe03fffff]
[ 3.224730] NET: Registered protocol family 2
[ 3.224844] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 3.225140] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 3.225758] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 3.226073] TCP: Hash tables configured (established 131072 bind 65536)
[ 3.226112] TCP reno registered
[ 3.226150] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 3.226196] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 3.226315] NET: Registered protocol family 1
[ 3.364083] pci 0000:01:05.0: Boot video device
[ 3.364095] PCI: CLS 4 bytes, default 64
[ 3.364445] cpufreq-nforce2: No nForce2 chipset.
[ 3.364515] Scanning for low memory corruption every 60 seconds
[ 3.364660] audit: initializing netlink socket (disabled)
[ 3.364707] type=2000 audit(1300441137.360:1): initialized
[ 3.373906] highmem bounce pool size: 64 pages
[ 3.373947] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 3.375974] VFS: Disk quotas dquot_6.5.2
[ 3.376105] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 3.376962] fuse init (API version 7.16)
[ 3.377093] msgmni has been set to 1670
[ 3.377430] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 3.377473] io scheduler noop registered
[ 3.377510] io scheduler deadline registered
[ 3.377566] io scheduler cfq registered (default)
[ 3.377710] pcieport 0000:00:07.0: setting latency timer to 64
[ 3.377740] pcieport 0000:00:07.0: irq 40 for MSI/MSI-X
[ 3.377806] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 3.377864] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 3.378079] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 3.378125] ACPI: Power Button [PWRB]
[ 3.378220] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 3.378263] ACPI: Power Button [PWRF]
[ 3.378348] ACPI: Fan [FAN] (on)
[ 3.378522] ACPI: acpi_idle registered with cpuidle
[ 3.380339] thermal LNXTHERM:00: registered as thermal_zone0
[ 3.380378] ACPI: Thermal Zone [THRM] (36 C)
[ 3.380461] ERST: Table is not found!
[ 3.380551] isapnp: Scanning for PnP cards...
[ 3.380569] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 3.401086] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 3.540498] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 3.734627] isapnp: No Plug & Play device found
[ 3.796733] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 3.817342] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 3.817681] Linux agpgart interface v0.103
[ 3.819124] brd: module loaded
[ 3.819748] loop: module loaded
[ 3.819861] i2c-core: driver [adp5520] using legacy suspend method
[ 3.819900] i2c-core: driver [adp5520] using legacy resume method
[ 3.820088] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.820466] Fixed MDIO Bus: probed
[ 3.820537] PPP generic driver version 2.4.2
[ 3.820608] tun: Universal TUN/TAP device driver, 1.6
[ 3.820645] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 3.820777] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.820836] ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 3.820883] ehci_hcd 0000:00:13.5: EHCI Host Controller
[ 3.820955] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1
[ 3.824066] ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
[ 3.824125] ehci_hcd 0000:00:13.5: debug port 1
[ 3.824195] ehci_hcd 0000:00:13.5: irq 19, io mem 0xfe029000
[ 3.836030] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00
[ 3.836223] hub 1-0:1.0: USB hub found
[ 3.836262] hub 1-0:1.0: 10 ports detected
[ 3.836408] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.836463] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.836517] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 3.836595] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
[ 3.836688] ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe02e000
[ 3.896129] hub 2-0:1.0: USB hub found
[ 3.896171] hub 2-0:1.0: 2 ports detected
[ 3.896289] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 3.896337] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 3.896407] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
[ 3.896497] ohci_hcd 0000:00:13.1: irq 17, io mem 0xfe02d000
[ 3.956113] hub 3-0:1.0: USB hub found
[ 3.956154] hub 3-0:1.0: 2 ports detected
[ 3.956271] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.956318] ohci_hcd 0000:00:13.2: OHCI Host Controller
[ 3.956390] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
[ 3.956476] ohci_hcd 0000:00:13.2: irq 18, io mem 0xfe02c000
[ 4.016113] hub 4-0:1.0: USB hub found
[ 4.016154] hub 4-0:1.0: 2 ports detected
[ 4.016267] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 4.016314] ohci_hcd 0000:00:13.3: OHCI Host Controller
[ 4.016384] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
[ 4.016457] ohci_hcd 0000:00:13.3: irq 17, io mem 0xfe02b000
[ 4.076115] hub 5-0:1.0: USB hub found
[ 4.076156] hub 5-0:1.0: 2 ports detected
[ 4.076264] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 4.076310] ohci_hcd 0000:00:13.4: OHCI Host Controller
[ 4.077144] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
[ 4.077216] ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe02a000
[ 4.136115] hub 6-0:1.0: USB hub found
[ 4.136156] hub 6-0:1.0: 2 ports detected
[ 4.136274] uhci_hcd: USB Universal Host Controller Interface driver
[ 4.136417] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 4.136900] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 4.136942] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 4.137089] mousedev: PS/2 mouse device common for all mice
[ 4.137240] rtc_cmos 00:04: RTC can wake from S4
[ 4.137372] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 4.137444] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 4.137559] device-mapper: uevent: version 1.0.3
[ 4.137681] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
[ 4.137800] device-mapper: multipath: version 1.2.0 loaded
[ 4.137839] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 4.137947] EISA: Probing bus 0 at eisa.0
[ 4.137984] EISA: Cannot allocate resource for mainboard
[ 4.138022] Cannot allocate resource for EISA slot 1
[ 4.138059] Cannot allocate resource for EISA slot 2
[ 4.138097] Cannot allocate resource for EISA slot 3
[ 4.138134] Cannot allocate resource for EISA slot 4
[ 4.138171] Cannot allocate resource for EISA slot 5
[ 4.138208] Cannot allocate resource for EISA slot 6
[ 4.138245] Cannot allocate resource for EISA slot 7
[ 4.138282] Cannot allocate resource for EISA slot 8
[ 4.138319] EISA: Detected 0 cards.
[ 4.138426] cpuidle: using governor ladder
[ 4.138464] cpuidle: using governor menu
[ 4.138789] TCP cubic registered
[ 4.138958] NET: Registered protocol family 10
[ 4.139607] NET: Registered protocol family 17
[ 4.139658] Registering the dns_resolver key type
[ 4.139728] powernow-k8: Found 1 AMD Phenom(tm) 9500 Quad-Core Processor (4 cpu cores) (version 2.20.00)
[ 4.139800] powernow-k8: 0 : pstate 0 (2200 MHz)
[ 4.139838] powernow-k8: 1 : pstate 1 (1100 MHz)
[ 4.140171] Using IPI No-Shortcut mode
[ 4.140294] PM: Hibernation image not present or could not be loaded.
[ 4.140306] registered taskstats version 1
[ 4.140551] Magic number: 3:866:626
[ 4.140673] rtc_cmos 00:04: setting system clock to 2011-03-18 09:38:58 UTC (1300441138)
[ 4.140717] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 4.140754] EDD information not available.
[ 4.140903] Freeing unused kernel memory: 700k freed
[ 4.141232] Write protecting the kernel text: 5188k
[ 4.141330] Write protecting the kernel read-only data: 2148k
[ 4.148047] usb 1-5: new high speed USB device using ehci_hcd and address 2
[ 4.154887] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 4.173607] udev[74]: starting version 167
[ 4.194922] sky2: driver version 1.28
[ 4.195016] sky2 0000:02:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 4.195068] sky2 0000:02:00.0: setting latency timer to 64
[ 4.195099] sky2 0000:02:00.0: Yukon-2 EC Ultra chip revision 3
[ 4.195227] sky2 0000:02:00.0: irq 41 for MSI/MSI-X
[ 4.219767] scsi0 : pata_atiixp
[ 4.221598] scsi1 : pata_atiixp
[ 4.222092] sky2 0000:02:00.0: eth0: addr 00:1c:25:53:b7:f4
[ 4.222254] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf900 irq 14
[ 4.222301] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf908 irq 15
[ 4.227867] ahci 0000:00:12.0: version 3.0
[ 4.227904] ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 4.227985] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
[ 4.228154] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 4.228203] ahci 0000:00:12.0: flags: ncq sntf ilck led clo pmp pio ccc
[ 4.234129] scsi2 : ahci
[ 4.236929] scsi3 : ahci
[ 4.238584] scsi4 : ahci
[ 4.240044] scsi5 : ahci
[ 4.240230] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
[ 4.240276] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
[ 4.240322] ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
[ 4.240366] ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
[ 4.251948] FDC 0 is a post-1991 82077
[ 4.303276] usbcore: registered new interface driver uas
[ 4.364031] Refined TSC clocksource calibration: 2194.499 MHz.
[ 4.364077] Switching to clocksource tsc
[ 4.560061] ata5: SATA link down (SStatus 0 SControl 300)
[ 4.560134] ata4: SATA link down (SStatus 0 SControl 300)
[ 4.560208] ata3: SATA link down (SStatus 0 SControl 300)
[ 4.616053] usb 4-2: new low speed USB device using ohci_hcd and address 2
[ 4.732018] ata6: softreset failed (device not ready)
[ 4.732058] ata6: applying SB600 PMP SRST workaround and retrying
[ 4.904038] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.907194] ata6.00: ATAPI: HL-DT-ST DVDRAM_GSA-H60N, CA01, max UDMA/100
[ 4.907234] ata6.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 4.911431] ata6.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 4.911470] ata6.00: configured for UDMA/100
[ 4.920378] scsi 5:0:0:0: CD-ROM HL-DT-ST DVDRAM_GSA-H60N CA01 PQ: 0 ANSI: 5
[ 4.924249] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.924293] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 4.924462] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 4.924548] sr 5:0:0:0: Attached scsi generic sg0 type 5
[ 4.937557] Initializing USB Mass Storage driver...
[ 4.937763] scsi6 : usb-storage 1-5:1.0
[ 4.937944] usbcore: registered new interface driver usb-storage
[ 4.937991] USB Mass Storage support registered.
[ 4.963710] [drm] Initialized drm 1.1.0 20060810
[ 4.965845] firewire_ohci 0000:03:06.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 4.976178] input: Acer IR Receiver as /devices/pci0000:00/0000:00:13.2/usb4/4-2/4-2:1.0/input/input3
[ 4.976375] generic-usb 0003:147A:E00D.0001: input,hiddev0,hidraw0: USB HID v1.10 Keyboard [Acer IR Receiver] on usb-0000:00:13.2-2/input0
[ 4.976437] usbcore: registered new interface driver usbhid
[ 4.976475] usbhid: USB HID core driver
[ 5.006663] [drm] radeon defaulting to kernel modesetting.
[ 5.006706] [drm] radeon kernel modesetting enabled.
[ 5.006824] radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 5.008425] [drm] initializing kernel modesetting (RS690 0x1002:0x791E).
[ 5.008490] [drm] register mmio base: 0xFDEE0000
[ 5.008527] [drm] register mmio size: 65536
[ 5.009090] ATOM BIOS: ATI
[ 5.009149] radeon 0000:01:05.0: VRAM: 256M 0x00000000D0000000 - 0x00000000DFFFFFFF (256M used)
[ 5.009193] radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
[ 5.009250] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 5.009288] [drm] Driver supports precise vblank timestamp query.
[ 5.009335] [drm] radeon: irq initialized.
[ 5.010656] [drm] Detected VRAM RAM=256M, BAR=64M
[ 5.010703] [drm] RAM width 128bits DDR
[ 5.010847] [TTM] Zone kernel: Available graphics memory: 427928 kiB.
[ 5.010892] [TTM] Zone highmem: Available graphics memory: 1677148 kiB.
[ 5.010931] [TTM] Initializing pool allocator.
[ 5.010991] [drm] radeon: 256M of VRAM memory ready
[ 5.011028] [drm] radeon: 512M of GTT memory ready.
[ 5.011088] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 5.020122] firewire_ohci: Added fw-ohci device 0000:03:06.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
[ 5.043476] [drm] radeon: 1 quad pipes, 1 z pipes initialized.
[ 5.057165] radeon 0000:01:05.0: WB enabled
[ 5.057268] [drm] Loading RS690/RS740 Microcode
[ 5.059635] [drm] radeon: ring at 0x00000000A0001000
[ 5.059693] [drm] ring test succeeded in 1 usecs
[ 5.059857] [drm] radeon: ib pool ready.
[ 5.059953] [drm] ib test succeeded in 0 usecs
[ 5.059996] [drm] Enabling audio support
[ 5.060046] failed to evaluate ATIF got AE_BAD_PARAMETER
[ 5.060291] [drm] Radeon Display Connectors
[ 5.060328] [drm] Connector 0:
[ 5.060364] [drm] VGA
[ 5.060401] [drm] DDC: 0x7e50 0x7e40 0x7e54 0x7e44 0x7e58 0x7e48 0x7e5c 0x7e4c
[ 5.060442] [drm] Encoders:
[ 5.060478] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 5.060514] [drm] Connector 1:
[ 5.060549] [drm] HDMI-A
[ 5.060586] [drm] DDC: 0x7e40 0x7e50 0x7e44 0x7e54 0x7e48 0x7e58 0x7e4c 0x7e5c
[ 5.060627] [drm] Encoders:
[ 5.060662] [drm] DFP3: INTERNAL_LVTM1
[ 5.184439] [drm] fb mappable at 0xF8040000
[ 5.184476] [drm] vram apper at 0xF8000000
[ 5.184513] [drm] size 7258112
[ 5.184548] [drm] fb depth is 24
[ 5.184584] [drm] pitch is 6912
[ 5.207591] Console: switching to colour frame buffer device 210x65
[ 5.223151] fb0: radeondrmfb frame buffer device
[ 5.223221] drm: registered panic notifier
[ 5.223290] [drm] Initialized radeon 2.8.0 20080528 for 0000:01:05.0 on minor 0
[ 5.520107] firewire_core: created device fw0: GUID 00016c20004d340a, S400
[ 5.942685] scsi 6:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS
[ 5.949302] scsi 6:0:0:1: Direct-Access Generic- SM/xD-Picture 1.00 PQ: 0 ANSI: 0 CCS
[ 5.956051] scsi 6:0:0:2: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS
[ 5.962802] scsi 6:0:0:3: Direct-Access Generic- MS/MS-Pro 1.00 PQ: 0 ANSI: 0 CCS
[ 5.963481] sd 6:0:0:0: Attached scsi generic sg1 type 0
[ 5.963781] sd 6:0:0:1: Attached scsi generic sg2 type 0
[ 5.964151] sd 6:0:0:2: Attached scsi generic sg3 type 0
[ 5.964427] sd 6:0:0:3: Attached scsi generic sg4 type 0
[ 5.970929] sd 6:0:0:0: [sda] Attached SCSI removable disk
[ 5.971810] sd 6:0:0:1: [sdb] Attached SCSI removable disk
[ 5.972685] sd 6:0:0:2: [sdc] Attached SCSI removable disk
[ 5.973547] sd 6:0:0:3: [sdd] Attached SCSI removable disk
[ 6.318977] Btrfs loaded
[ 6.326361] xor: automatically using best checksumming function: pIII_sse
[ 6.344007] pIII_sse : 8969.000 MB/sec
[ 6.344067] xor: using function: pIII_sse (8969.000 MB/sec)
[ 6.347499] device-mapper: dm-raid45: initialized v0.2594b
[ 12.419172] sr 5:0:0:0: [sr0] Unhandled sense code
[ 12.419250] sr 5:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 12.419356] sr 5:0:0:0: [sr0] Sense Key : Medium Error [current]
[ 12.419450] Info fld=0x52ac4
[ 12.419496] sr 5:0:0:0: [sr0] Add. Sense: Unrecovered read error
[ 12.419584] sr 5:0:0:0: [sr0] CDB: Read(10): 28 00 00 05 2a c4 00 00 01 00
[ 12.419701] end_request: I/O error, dev sr0, sector 1354512
[ 12.419783] Buffer I/O error on device sr0, logical block 338628
[ 15.471062] sr 5:0:0:0: [sr0] Unhandled sense code
[ 15.471134] sr 5:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 15.471237] sr 5:0:0:0: [sr0] Sense Key : Medium Error [current]
[ 15.471329] Info fld=0x52ac4
[ 15.471374] sr 5:0:0:0: [sr0] Add. Sense: Unrecovered read error
[ 15.471461] sr 5:0:0:0: [sr0] CDB: Read(10): 28 00 00 05 2a c4 00 00 01 00
[ 15.471578] end_request: I/O error, dev sr0, sector 1354512
[ 15.471659] Buffer I/O error on device sr0, logical block 338628
[ 18.522929] sr 5:0:0:0: [sr0] Unhandled sense code
[ 18.523003] sr 5:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 18.523105] sr 5:0:0:0: [sr0] Sense Key : Medium Error [current]
[ 18.523196] Info fld=0x52ac4
[ 18.523242] sr 5:0:0:0: [sr0] Add. Sense: Unrecovered read error
[ 18.523328] sr 5:0:0:0: [sr0] CDB: Read(10): 28 00 00 05 2a c4 00 00 01 00
[ 18.523444] end_request: I/O error, dev sr0, sector 1354512
[ 18.523525] Buffer I/O error on device sr0, logical block 338628
[ 21.574845] sr 5:0:0:0: [sr0] Unhandled sense code
[ 21.574916] sr 5:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 21.575021] sr 5:0:0:0: [sr0] Sense Key : Medium Error [current]
[ 21.575114] Info fld=0x52ac4
[ 21.575158] sr 5:0:0:0: [sr0] Add. Sense: Unrecovered read error
[ 21.575246] sr 5:0:0:0: [sr0] CDB: Read(10): 28 00 00 05 2a c4 00 00 01 00
[ 21.575362] end_request: I/O error, dev sr0, sector 1354512
[ 21.575442] Buffer I/O error on device sr0, logical block 338628
[ 24.626741] sr 5:0:0:0: [sr0] Unhandled sense code
[ 24.626814] sr 5:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 24.626918] sr 5:0:0:0: [sr0] Sense Key : Medium Error [current]
[ 24.627009] Info fld=0x52ac4
[ 24.627054] sr 5:0:0:0: [sr0] Add. Sense: Unrecovered read error
[ 24.627141] sr 5:0:0:0: [sr0] CDB: Read(10): 28 00 00 05 2a c4 00 00 01 00
[ 24.627258] end_request: I/O error, dev sr0, sector 1354512
[ 24.627338] Buffer I/O error on device sr0, logical block 338628
[ 27.678661] sr 5:0:0:0: [sr0] Unhandled sense code
[ 27.678732] sr 5:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 27.678840] sr 5:0:0:0: [sr0] Sense Key : Medium Error [current]
[ 27.678932] Info fld=0x52ac4
[ 27.678977] sr 5:0:0:0: [sr0] Add. Sense: Unrecovered read error
[ 27.679063] sr 5:0:0:0: [sr0] CDB: Read(10): 28 00 00 05 2a c4 00 00 01 00
[ 27.679179] end_request: I/O error, dev sr0, sector 1354512
[ 27.679259] Buffer I/O error on device sr0, logical block 338628
[ 30.759711] sr 5:0:0:0: [sr0] Unhandled sense code
[ 30.763955] sr 5:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 30.768260] sr 5:0:0:0: [sr0] Sense Key : Medium Error [current]
[ 30.772560] Info fld=0x52ac4
[ 30.776819] sr 5:0:0:0: [sr0] Add. Sense: Unrecovered read error
[ 30.781063] sr 5:0:0:0: [sr0] CDB: Read(10): 28 00 00 05 2a c4 00 00 01 00
[ 30.785392] end_request: I/O error, dev sr0, sector 1354512
[ 30.789671] Buffer I/O error on device sr0, logical block 338628
[ 31.136278] sr 5:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 31.140531] sr 5:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 31.144823] Info fld=0x52ac3, ILI
[ 31.149097] sr 5:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 31.153545] sr 5:0:0:0: [sr0] CDB: Read(10): 28 00 00 05 2a c2 00 00 02 00
[ 31.158063] end_request: I/O error, dev sr0, sector 1354504
[ 31.162623] Buffer I/O error on device sr0, logical block 338626
[ 31.167207] Buffer I/O error on device sr0, logical block 338627
[ 34.247640] sr 5:0:0:0: [sr0] Unhandled sense code
[ 34.252352] sr 5:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 34.257089] sr 5:0:0:0: [sr0] Sense Key : Medium Error [current]
[ 34.261779] Info fld=0x52ac4
[ 34.266468] sr 5:0:0:0: [sr0] Add. Sense: Unrecovered read error
[ 34.271194] sr 5:0:0:0: [sr0] CDB: Read(10): 28 00 00 05 2a c4 00 00 01 00
[ 34.275898] end_request: I/O error, dev sr0, sector 1354512
[ 34.280622] Buffer I/O error on device sr0, logical block 338628
[ 37.357766] sr 5:0:0:0: [sr0] Unhandled sense code
[ 37.362496] sr 5:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 37.367243] sr 5:0:0:0: [sr0] Sense Key : Medium Error [current]
[ 37.371940] Info fld=0x52ac4
[ 37.376635] sr 5:0:0:0: [sr0] Add. Sense: Unrecovered read error
[ 37.381379] sr 5:0:0:0: [sr0] CDB: Read(10): 28 00 00 05 2a c4 00 00 01 00
[ 37.386108] end_request: I/O error, dev sr0, sector 1354512
[ 37.390834] Buffer I/O error on device sr0, logical block 338628
[ 37.618032] sr 5:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 37.622766] sr 5:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 37.627528] Info fld=0x52ac3, ILI
[ 37.632262] sr 5:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 37.637003] sr 5:0:0:0: [sr0] CDB: Read(10): 28 00 00 05 2a c2 00 00 02 00
[ 37.641817] end_request: I/O error, dev sr0, sector 1354504
[ 37.646606] Buffer I/O error on device sr0, logical block 338626
[ 37.651391] Buffer I/O error on device sr0, logical block 338627
[ 39.016353] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 39.166982] ISO 9660 Extensions: RRIP_1991A
[ 39.503112] aufs 2.1-standalone.tree-38-rcN-20110207
[ 39.643669] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 110.791672] udev[1192]: starting version 167
[ 117.849723] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 117.960336] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 117.961873] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
[ 118.063594] parport_pc 00:0b: reported by Plug and Play ACPI
[ 118.063654] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 118.268935] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[ 118.269094] SP5100 TCO timer: Watchdog reboot not detected.
[ 118.269185] SP5100 TCO timer: initialized (0xf80760f0). heartbeat=60 sec (nowayout=0)
[ 118.856984] psmouse serio1: ID: 10 00 64
[ 119.093742] ppdev: user-space parallel port driver
[ 119.492696] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
[ 123.915843] sky2 0000:02:00.0: eth0: enabling interface
[ 123.916222] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 124.433040] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 124.939503] hda_codec: ALC1200: BIOS auto-probing.
[ 124.939512] hda_codec: ALC1200: SKU not ready 0x598301f0[ 110.791672] udev[1192]: starting version 167
[ 124.951477] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
[ 124.951651] HDA Intel 0000:01:05.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 124.951703] HDA Intel 0000:01:05.2: irq 42 for MSI/MSI-X
[ 126.024640] sky2 0000:02:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control rx
[ 126.024891] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Je peux préciser que l'outrage est commis dans cet intervalle :
[ 110.791672] udev[1192]: starting version 167
[ 117.849723] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 117.960336] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 117.961873] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
[ 118.063594] parport_pc 00:0b: reported by Plug and Play ACPI
[ 118.063654] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 118.268935] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[ 118.269094] SP5100 TCO timer: Watchdog reboot not detected.
[ 118.269185] SP5100 TCO timer: initialized (0xf80760f0). heartbeat=60 sec (nowayout=0)
[ 118.856984] psmouse serio1: ID: 10 00 64
[ 119.093742] ppdev: user-space parallel port driver
[ 119.492696] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
C'est à dire que si j'interromps le démarrage en appuyant plus de 3 secondes sur le bouton marche-arrêt en face avant de la tour juste après 110 secondes (c'est à dire après le démarrage de udev), le mal n'a pas été fait, je peux redémarrer le PC sans problème. Par contre, si j'attends quelques secondes de plus, de sorte que je puisse apercevoir le message " k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled" juste avant extinction, là, c'est cuit : Natty a foutu la merde et je dois faire la manip indiquée au début du post, à savoir couper le secteur quelques secondes par le petit interrupteur à l'arrière de l'alim de la tour afin de mettre hors tension la carte-mère pour "rincer" les conneries de Natty.
Edit : ce n'est pas parce que je peux voir le message "k10temp...." que j'en conclus que c'est un problème lié à la gestion du CPU. C'est peut-être ça comme c'est peut-être autre chose puisque il y a beaucoup d'activité à cet instant comme on peut voir ( ça pourrait être piix4_smbus ou SP5100 TCO timer )
